JAMB UTME - Agricultural Science - 2024

The factors that affect the number and the activities of soil micro-organisms include the following except

Detalhes da Resposta

When evaluating the factors that affect the number and activities of soil microorganisms, it's essential to understand how each factor influences their environment:

Soil Moisture: Water is crucial for the survival of microorganisms as it facilitates their metabolic processes and nutrient transfer. Soil moisture can significantly affect microbial activity and population. Too much or too little water can reduce microbial activity since it impacts their ability to respire and access nutrition.

Degree of Soil Acidity (pH): The pH level of soil affects the growth and diversity of microorganisms. Each microorganism has its preferred pH range, and extreme acidity or alkalinity can hinder their growth. Hence, the acidity of the soil plays a crucial role in determining the microbial population.

Soil Aeration: Oxygen availability is vital for the respiration of aerobic soil microorganisms. Good soil aeration ensures that oxygen can penetrate the soil, which supports aerobic microbial activity. Poorly aerated soils may favor anaerobic organisms but lower the overall microbial diversity and activity.

Topography: Contrary to the other factors, topography itself does not directly affect the number and activities of soil microorganisms. However, it can indirectly influence factors like moisture and temperature distribution across the landscape. The impacts of topography are often significant but are more mediated through secondary effects rather than being a direct factor influencing microbial numbers and activities.

In conclusion, while soil moisture, acidity, and aeration directly influence the presence and activity of soil microorganisms, topography primarily affects them indirectly through its effects on other environmental conditions.

The type of soil with a particle size of 0.02 to 0.002 mm

Detalhes da Resposta

The type of soil with a particle size ranging from 0.002 to 0.05 millimeters is known as silt. Soil particles are classified based on their sizes, and here is a brief explanation of other soil types for context:

• Clay: has very fine particles that are smaller than 0.002 millimeters. Clay particles are the smallest among soil types, creating a dense and sticky texture when wet.
• Silt: has slightly larger particles than clay, with sizes ranging from 0.002 to 0.05 millimeters. Silt feels smooth and floury to the touch and is less dense than clay.
• Fine Sand: consists of particles that are larger than silt, typically ranging from 0.05 to 0.2 millimeters. Fine sand has a gritty feel and allows water to drain through it more easily than silt or clay.
• Coarse Sand: contains even larger particles, generally ranging from 0.2 to 2 millimeters. It offers excellent drainage and is very gritty and rough to the touch.

In summary, silt describes soil with a particle size of 0.002 to 0.05 millimeters, making it distinct in its smooth texture and moderate drainage capacity.

When a piece of land is leased to a farmer, the land is said to be

Detalhes da Resposta

When a piece of land is leased to a farmer, the land is said to be allocated on a rental basis.

Let me explain further:

Leasing is a common agreement where the owner of a property (in this case, the land) grants someone else (the farmer) the right to use that property for a specified period. This does not involve buying the land; instead, the farmer pays a regular fee, often called rent, to the landowner.

In this arrangement, the landowner retains ownership of the land, and the agreement usually includes terms such as duration, financial compensation, and specific uses of the land. At the end of the lease, the land typically returns to the owner's control unless the lease is renewed.

Thus, leasing involves the use of the land under a rental agreement, not purchasing it, receiving it as a gift, or as a subsidy.

The replacement of traditional farming methods with modern methods is a step in agricultural development

Detalhes da Resposta

The replacement of traditional farming methods with modern methods is indeed a step in agricultural development. Here's why:

Modern Methods refer to the use of advanced techniques, tools, and technologies in agriculture, such as tractors, genetically modified seeds, chemical fertilizers, and automated irrigation systems. These methods have several advantages:

• Increased Productivity: Modern methods lead to higher crop yields, which means more food can be produced with the same amount of land.
• Efficiency: The use of machinery and technology makes farming operations faster and less labor-intensive.
• Better Pest and Disease Management: Chemical fertilizers and pesticides help in protecting crops from pests and diseases, which otherwise would have reduced crop yields.
• Sustainability: Innovations like drip irrigation help in conserving water and ensuring that farming practices are environmentally sustainable.

By adopting these modern methods, farmers can not only maximize production but also ensure the sustainability and economic viability of their agricultural practices. This shift from traditional to modern methods represents a significant development in agriculture as it transforms the way farming is performed, leading to overall growth and efficiency in the agricultural sector.

Which of the following group of crops can be attacked by smut diseases?

Detalhes da Resposta

Smut diseases are caused by a group of fungi that primarily attack cereal crops. The infection leads to the formation of thick-walled and often black, sooty spores. The crops most affected by smut diseases are those in the grass family. These fungi often attack the grains or inflorescences of the plants, which can lead to significant agricultural losses.

Out of the given options, the crops rice, maize, and guinea corn are susceptible to smut diseases. Here's why:

• Rice: Known to be affected by diseases such as kernel smut.
• Maize (corn): Commonly affected by common corn smut (Ustilago maydis), which is noted for its gall formations on ears and kernels.
• Guinea corn (Sorghum): Can suffer from several smut diseases including covered smut, loose smut, and head smut.

Therefore, rice, maize, and guinea corn form the group of crops that can be attacked by smut diseases.

New-born animals should be fed with colostrum because it

Detalhes da Resposta

New-born animals should be fed with colostrum primarily because it contains antibodies that protect them against diseases. Colostrum is the first milk produced by the mother shortly after giving birth. This special milk is rich in antibodies and nutrients essential for the new-born's health.

Antibodies are proteins that can fight infections and boost the immune system. By consuming colostrum, new-born animals receive immediate protection against common diseases and infections they might encounter in the first days of their life. This early protection is crucial because new-borns are particularly vulnerable to illnesses until their own immune systems are more developed.

While colostrum is also easily digested and is the first milk produced before birth, the primary reason it is so vital for new-borns is the presence of these protective antibodies.

Wastage of agricultural products during the harvesting period is mainly due to inadequate?

Detalhes da Resposta

Wastage of agricultural products during the harvesting period is primarily due to inadequate storage and processing facilities. Let's break this down:

When crops are harvested, they need to be properly stored to maintain their quality and prevent spoilage. Without adequate storage facilities, farmers may not be able to keep their produce under the right conditions, leading to deterioration. This is especially important for perishable products like fruits and vegetables, which can spoil quickly if not kept in cool, dry places.

Furthermore, processing facilities are crucial for handling agricultural products soon after harvesting. Processing can include cleaning, sorting, drying, or packaging produce, which helps extend its shelf life and makes it ready for market. Without these facilities, produce can quickly degrade, resulting in significant wastage.

In summary, having sufficient and efficient storage and processing facilities is key to reducing wastage of agricultural products during the harvest period. It ensures that produce maintains its quality and can reach consumers without spoilage.

Which of the following will not be affected by an excessive amount of water content in feeds?

Detalhes da Resposta

In simple terms, when feed has too much water, it can cause several issues. Excessive water content can lead to a decrease in nutritive value because nutrients might wash out or break down. Furthermore, too much moisture can encourage the growth of molds, as they thrive in damp environments. This, in turn, can result in the formation of toxic products, which are dangerous for consumption.

However, there's one aspect that will not be affected: improving the quality of such feeds. In fact, excessive water typically does the opposite; it reduces quality rather than enhancing it, by risking spoilage and nutrient loss.

Government laws and reforms are aimed at

Detalhes da Resposta

Government laws and reforms in the agricultural sector are primarily aimed at increasing agricultural production. This is achieved through a variety of mechanisms, such as providing subsidies, implementing policies that support farmers, investing in agricultural research and technology, and ensuring access to resources like water and land. These efforts are designed to enhance the efficiency and productivity of agricultural activities. By increasing agricultural production, the government can ensure food security, reduce dependency on imports, and support the livelihood of farmers and related industries.

Which of the following is not a characteristic of a good pasture?

Detalhes da Resposta

In evaluating the characteristics of a good pasture, it is important to consider the elements that contribute to effective livestock grazing and growth. Let's go through each characteristic:

• Provision of balanced nutrients: A good pasture should provide a variety of nutrients essential for the growth, health, and productivity of livestock.
• High stem to leaf ratio: A high stem to leaf ratio is not a desirable characteristic in a good pasture. Ideally, a pasture should have a low stem to leaf ratio, meaning it should have more leaves than stems. Leaves are more palatable and nutritious for livestock compared to stems.


• High quality of grass: This means the grass should be nutritious and palatable, which contributes to the efficiency of feeding and overall health of the animals.
• Ability to withstand trampling: A good pasture has grasses that can endure the physical stress of being walked on by livestock, ensuring the pasture remains viable for longer periods.

Therefore, a high stem to leaf ratio is not a characteristic of a good pasture. It indicates fewer leaves, which are crucial for providing energy and nutrients to livestock.

The water-snail is important in the life cycle of

Detalhes da Resposta

The water-snail is important in the life cycle of the liver fluke. Liver flukes are parasitic flatworms that cause a disease called fascioliasis in the liver of various mammals, including humans, cattle, and sheep.

Here is a simple explanation of how the water-snail fits into the liver fluke's life cycle:

1. Egg Stage: The adult liver fluke lives in the host's liver and produces eggs, which are excreted in the host's feces.

2. Miracidium Stage: These eggs hatch in a water environment into larval forms called miracidia.

3. Snail Host: The miracidia must find and penetrate a specific species of freshwater snail. The water-snail serves as the intermediate host where the liver fluke undergoes a significant part of its development.

4. Sporocyst, Rediae, and Cercariae Stages: Inside the snail, the liver fluke develops through several stages: sporocysts, rediae, and cercariae.

5. Free-swimming Cercariae: The cercariae leave the snail and enter the water, seeking to attach to aquatic plants or other surfaces.

6. Metacercariae on Plants: The cercariae encyst to form metacercariae on these plants, waiting to be ingested by the next mammalian host.

Thus, the water-snail plays a crucial role as an intermediate host, enabling the fluke to transform into forms that are ready to infect mammals. Without the snail, the liver fluke's life cycle cannot continue.

The horizon of the soil profile that encourages the greatest level of microbial activity is

Detalhes da Resposta

The soil profile consists of different layers, known as horizons, each having distinct characteristics. The horizon where the greatest level of microbial activity occurs is the A-horizon. Let me explain why this is the case in a simple and comprehensive way.

The A-horizon is also known as the topsoil. It is the uppermost layer of the soil and is rich in organic material. This horizon contains **humus**, which is decomposed organic matter, making it very fertile. The reasons why microbial activity is so high in the A-horizon are:

• Rich in Organic Matter: The presence of decomposed organic material provides an excellent source of nutrients, which encourages the growth and activity of microbes such as bacteria, fungi, and actinomycetes.
• Favorable Conditions: The topsoil is well aerated and has good moisture content, which creates an optimum environment for microbial life.
• Presence of Plants: The root systems of plants are primarily located in the A-horizon. Root exudates provide additional nutrients that benefit microbial activity.

Overall, the combination of abundant organic material and favorable living conditions supports robust microbial communities in the A-horizon, making it the layer with the greatest microbial activity.

Which of the following defines agriculture?

Detalhes da Resposta

Agriculture is best defined as the science and art of farming to satisfy human needs. This definition encompasses a broad range of activities that include both the cultivation of soil for growing crops and the raising of livestock. The concept of agriculture covers various aspects such as soil management, crop production, breeding, genetics, plant pathology, and more. It is both a science, because it involves understanding biological, chemical, and ecological processes, and an art, because it requires skill and expertise to effectively manage these processes to produce food and other resources needed by humans. Therefore, among the definitions provided, this one captures the full scope of what agriculture truly involves.

The correct sequence of the components of a goat's stomach is

Detalhes da Resposta

Goats, like other ruminants, have a unique digestive system adapted to break down fibrous plant material. Their stomach is divided into four compartments, each with specialized functions. Understanding the correct sequence of these compartments is crucial for comprehending how goats digest their food.

The correct sequence of a goat’s stomach is:

1. **Rumen**: This is the first and largest compartment. It serves as a fermentation vat where complex plant fibers are broken down by bacteria and other microorganisms. The rumen allows for the initial breakdown of food and is crucial for the digestion of cellulose found in plants.

2. **Reticulum**: Sometimes considered part of the rumen (together referred to as the reticulo-rumen), the reticulum works closely with the rumen. It traps foreign materials like small stones or metal objects and forms smaller food particles into cud, which are regurgitated back to the mouth for further chewing and digestion.

3. **Omasum**: This compartment acts as a filter. It absorbs water and minerals from the digested food and grinds the food particles further. The omasum has many folds, increasing its surface area to maximize absorption.

4. **Abomasum**: Known as the "true stomach," the abomasum is similar to a monogastric stomach (like in humans). It uses acids and digestive enzymes to break down proteins and complete the digestion process, preparing the food for intestines.

Thus, the correct sequence is rumen, reticulum, omasum, and abomasum.

The most important factor that determines the rate of agricultural development in a country is the

Detalhes da Resposta

The **most important factor** that determines the rate of agricultural development in a country is the **readiness of farmers to adopt viable agricultural research results**. Here's why:

1. Innovation and Efficiency: Agricultural research provides new techniques, tools, and practices that can significantly increase crop yields, reduce costs, and improve sustainability. When farmers are ready and willing to adopt these research results, they can implement more efficient and effective farming methods.

2. Adaptability to Change: The world of agriculture is continually evolving with advances in technology, improved crop varieties, pest control methods, and climate-smart practices. Farmers who are open to adopting research findings can quickly adapt to changes and challenges, leading to more robust agricultural development.

3. Economic Growth: By embracing new research, farmers can produce higher quality or larger quantities of agricultural products. This can lead to increased income for farmers, a reduction in poverty, and a contribution to the overall economic development of the country.

4. Sustainability: Viable agricultural research often focuses on sustainable practices. Farmers who are willing to implement these results help protect the environment, conserve resources, and ensure agricultural productivity for future generations.

While factors such as the number of machinery, herbicide use, and provision of raw materials are important, **they are secondary to the primary role of adopting research**. Machinery and herbicides are tools that can enhance farming when used appropriately, but their effectiveness largely depends on farmers being informed through research. Similarly, the provision of raw materials relies on agricultural production, which research adoption profoundly enhances.

Which of the following feedstuff does not contain phosphorus?

Detalhes da Resposta

In the context of animal nutrition, it's crucial to distinguish the nutrient content of various feedstuffs. When considering phosphorus, which is an essential mineral for bones and other biological functions, it's important to identify feedstuffs based on their primary composition.

Limestone and oyster shell are primarily composed of calcium carbonate. They are often used in animal feeds to supplement calcium, not phosphorus. Both these materials are mainly known for their high calcium content and typically contain little to no phosphorus.

On the other hand, fish meal and blood meal are animal-derived feed components rich in proteins and generally contain phosphorus as part of their natural organic composition.

Therefore, the feedstuff that does not contain phosphorus among the options listed is limestone, since it primarily provides calcium and not phosphorus.

Gestation period is defined as the time

Detalhes da Resposta

The gestation period is defined as the period of time between conception and parturition. This means it is the duration from when an egg is fertilized by a sperm, leading to the formation of a fertilized egg, until the birth of the young animal. In humans, this period is typically about nine months. It is the time during which the embryo or fetus develops inside the mother's body, leading up to the birth.

Air sacs are present in

Detalhes da Resposta

Air sacs are present in poultry, which includes birds like chickens, ducks, and turkeys. These air sacs are an essential part of the avian respiratory system. Unlike mammals, birds have a unique respiratory system that includes a series of air sacs that facilitate a continuous flow of air through their lungs. This system allows for more efficient gas exchange, which is crucial for their energy needs during activities like flying.

In more detail, when birds inhale, air doesn't just go into their lungs but also fills these air sacs. On the next exhalation, the air moves from the air sacs into the lungs, where oxygen is exchanged for carbon dioxide. This method ensures that the bird's lungs have a continuous supply of fresh air, both when they inhale and exhale.

Other animals listed, such as rabbits, goats, and cattle, have different respiratory systems without air sacs; they rely on diaphragm-based breathing similar to humans for their oxygen needs. The specialized respiratory system of birds thus gives them an advantage in terms of metabolic efficiency, which is particularly important given the energy demands of flying.

Igneous rocks formed within the crust are called

Detalhes da Resposta

Igneous rocks that form within the Earth's crust are called plutonic rocks. These rocks form when magma cools and solidifies slowly beneath the Earth's surface. Because of the slow cooling process, plutonic rocks typically have large, visible crystals. A common example of a plutonic rock is granite.

To better understand, imagine that magma is like a molten rock mixture. When it finds its way into the Earth's crust and cools down very slowly, it gives enough time for the crystals to grow large. This is different from volcanic rocks, which are formed when magma reaches the surface, cools quickly and forms smaller crystals.

The alternate heating and cooling of rocks will result in

Detalhes da Resposta

The **alternate heating and cooling of rocks** will primarily result in **fragmentation**. This process is commonly known as **physical weathering** or **mechanical weathering**.

Here's how it works:

• During the day, **rocks heat up due to sunlight**. This causes the outer layers of the rock to **expand**.
• At night, the **temperature drops**, causing the rock layers to **cool and contract**.
• This repeated process of expansion and contraction due to temperature changes creates **stress within the rock structure**.
• Over time, this stress causes the outer layers of the rock to **crack and break apart**, leading to **fragmentation** of the rock.

In contrast, the other processes listed involve different conditions:

• **Sublimation** refers to the direct transition of a substance from a solid to a gas, which is not relevant to rock weathering through temperature changes.
• **Solidification** involves the hardening of a substance from a liquid to a solid state, not fragmentation.
• **Molten magma** is formed under conditions of intense heat that melt rock into a liquid state, unrelated to the cooling process described above.

Thus, the **alternate heating and cooling of rocks** primarily results in their **fragmentation** into smaller pieces.

In the nitrogen cycle , nitrite is oxidized to nitrate by

Detalhes da Resposta

In the nitrogen cycle, the conversion of nitrite into nitrate is an important step. This process is known as nitrification. Nitrification is carried out by specific types of bacteria found in soil and water environments. The bacteria responsible for this transformation are primarily of the genus called Nitrobacter.

Nitrobacter bacteria play a crucial role by taking nitrite (NO₂^-), which is a less stable and less usable form of nitrogen for most plants, and converting it into nitrate (NO₃^-), which is a more stable and accessible form of nitrogen for plant uptake. This step is crucial because it makes nitrogen available in a form that can be easily absorbed by plants, thus supporting plant growth and development.

In summary, Nitrobacter are the bacteria responsible for oxidizing nitrite to nitrate in the nitrogen cycle.

The most active agent of physical weathering in arid legions is

Detalhes da Resposta

In arid regions, the most active agent of physical weathering is wind.

Arid regions, known for their dry climates and minimal vegetation, provide ideal conditions for wind to actively erode and weather the landscape. Here's how it works:

• Loose Particles: The lack of vegetation means there is little to hold soil and small particles in place. This makes them easily picked up and carried by the wind.
• Abrasion: When wind carries particles like sand, they collide with rocks and surfaces, effectively sandblasting them. This process breaks down rocks into smaller pieces over time.
• Sculpting: Wind action can create unique rock formations as it wears away softer materials, leaving behind harder rock structures.
• Transportation: The wind can transport weathered material over long distances, affecting not just the source area but also where these particles are eventually deposited.

Although temperature, water, and ice can also contribute to physical weathering, wind is particularly significant in arid regions due to its persistence and effectiveness in altering the landscape without the need for much moisture.

Weed plants which grow on other plants without deriving nutrients from them are called

Detalhes da Resposta

Plants that grow on other plants but do not take nutrients from them are called epiphytes. Unlike parasites, which extract nutrients from their host plant, epiphytes simply use the host plant for physical support. This allows them to gain better access to light, air, and rainwater. Epiphytes are common in rainforests, where they grow on larger trees to reach sunlight. They have special adaptations, like aerial roots, to absorb moisture and nutrients from the air rather than relying on the soil.

A major symptom of onion/twister is

Detalhes da Resposta

A major symptom of onion/twister is the appearance of dark brown spots on leaves. Onion/twister is a disease that affects onion plants, causing the leaves to twist and curl

Which of the following livestock endoparasite is a hermaphmdite?

Detalhes da Resposta

To determine which of the mentioned livestock endoparasites is a hermaphrodite, it's important to understand what a hermaphrodite is. A hermaphrodite organism has both male and female reproductive organs, allowing it to reproduce without needing a mate of the opposite sex.

For each parasite:

• Trypanosome: These are protozoan parasites that cause diseases like sleeping sickness in humans and animals. They reproduce primarily through asexual means and are not hermaphroditic.


• Roundworm: Many roundworms have separate sexes, meaning they're not hermaphrodites. They usually reproduce sexually and require individuals of opposite sexes to mate.


• Liverfluke: Liverflukes, such as those from the genus Fasciola, are indeed hermaphrodites. They have both male and female reproductive organs and can self-fertilize or cross-fertilize with others. This adaptation helps ensure their survival and reproduction even if isolated.


• Tapeworm: Tapeworms are also hermaphrodites. Each segment of a tapeworm (called a proglottid) contains both male and female reproductive organs. They can self-fertilize, although cross-fertilization between proglottids of the same or different worms can occur.

Therefore, in the context of your question, both liverfluke and tapeworm are hermaphrodites. However, if choosing only one as a typical example of a hermaphroditic endoparasite, both can be valid responses, but tapeworm is often more prominently recognized.

The tree species commonly planted for pulpwood is

Detalhes da Resposta

When it comes to planting tree species for pulpwood, the primary goal is to select species that grow quickly and produce a high yield of wood fiber. **Gmelina arborea**, commonly referred to as Gmelina, is one of the most popular tree species used for this purpose. There are several reasons for this preference:

• Fast Growth Rate: Gmelina arborrea grows rapidly, which means it can be harvested sooner compared to other tree species. This makes it highly efficient for pulp production.
• High Wood Density: The wood from Gmelina is dense, providing a good quantity of pulp that is suitable for making paper and other pulp products.
• Adaptability: Gmelina can adapt to a variety of soil types and environmental conditions, making it a versatile choice for different geographic locations.
• Managing Soil Quality: It has been observed that Gmelina plantations can help in improving soil quality, which is beneficial for sustainable forestry practices.

These characteristics make **Gmelina arborea** an ideal choice for pulpwood production, allowing it to be favored in plantations focused on the production of pulp and paper products.

The diagram above illustrates a reproductive process in a farm animal, study the process and answer the questions.

Which word best describes the process depicted by the diagram?

Detalhes da Resposta

To explain this reproductive process comprehensively, let's break down each term and how it fits into the reproductive cycle of a farm animal.

Gestation: This is the period during which a female animal carries a developing embryo or fetus inside her body. In farm animals, gestation varies depending on the species. For example, the average gestation period for cows is about nine months, while for pigs it's around three months. During this phase, the female's body supports the developing young until birth.

Heat: Otherwise known as estrus, this is the period when a female animal is receptive to mating. It is part of the estrous cycle and signals that ovulation is about to occur. *During this time, the female exhibits specific behavioral changes that attract the male animal for breeding.

Ovulation: This is the process when the female's ovary releases an egg or ovum. It is a critical stage in the reproductive cycle because it's the time when fertilization by the male's sperm can occur. **Ovulation is timed with the heat period, making conception possible.**

Lactation: This is the period following birth during which a female animal produces milk. Lactation is essential for the nourishment and growth of the newborn. In many farm animals, lactation starts after parturition (birth) and continues for several months, providing the necessary nutrients for the offspring's development.

In conclusion, the reproductive process in farm animals involves a sequence of stages: **the female comes into heat and ovulates, potentially leading to conception.** If the egg is fertilized, the gestation period follows, culminating in birth, after which lactation begins to provide for the newborn. Each stage is meticulously timed and crucial for successful reproduction.

The foot and mouth disease of cattle is caused by a

Detalhes da Resposta

The foot and mouth disease of cattle is caused by a virus. This particular virus is known as the Foot-and-Mouth Disease Virus (FMDV). It is a highly contagious viral infection that affects not only cattle but other cloven-hoofed animals like sheep, goats, and pigs. The disease is characterized by the development of blisters in the mouth and on the feet, leading to lameness and drooling.

The virus spreads rapidly among animals through direct contact, contaminated feed, and even the wind, making it challenging to control. Managing this disease involves strict biosecurity measures, vaccination programs, and sometimes culling infected animals to prevent further spread. Understanding that the cause is viral is crucial because it informs the strategies used for prevention and control, which differ significantly from those for diseases caused by bacteria, fungi, or nematodes.

Gummosis is caused by a

Detalhes da Resposta

Gummosis is a condition that affects trees, particularly stone fruit trees like peaches, cherries, and plums. It is characterized by the excretion of sap or gum from wounds or cracks in the bark. The primary cause of gummosis is often related to stress factors, injuries, or infections. While gummosis can occur due to a variety of reasons such as physical damage or environmental stress, it is important to understand the role of different organisms in causing or exacerbating this condition.

In the context of organisms that could be involved, **fungal** and **bacterial** infections are the most common biological causes of gummosis. **Fungal** infections such as those caused by the fungi of the genus Botryosphaeria, are frequently associated with gummosis in trees. These fungi invade the tree through wounds or damaged areas and result in the production of gum as the tree attempts to isolate the infection.

Similarly, **bacterial** infections, particularly by bacteria in the genus Pseudomonas (for example, Pseudomonas syringae), can also lead to gummosis. These bacteria take advantage of wounds to enter the tree and cause gum formation as a response to the infection.

Although **nematodes** and **viruses** can negatively impact trees, they are not typically associated with causing gummosis. **Nematodes** are more likely to affect the root system, while **viruses** might cause other symptoms like leaf mottling or fruit deformities.

Thus, **the most common biological causes of gummosis are infections by fungi and bacteria**. When dealing with gummosis, it is essential to examine the possible presence of these pathogens and address any injuries or stress factors affecting the tree.

The provision of farm inputs to farmers by the government can best be described as

Detalhes da Resposta

The provision of farm inputs to farmers by the government can best be described as a subsidy.

A subsidy is a form of financial assistance given by the government to reduce the cost of products or services, making them more affordable for the public. When the government provides farm inputs such as seeds, fertilizers, and equipment at reduced costs or even for free, this helps farmers to lower their production costs. By doing so, farmers can produce agricultural goods more efficiently and affordably, leading to increased agricultural output and potentially lower prices for consumers.

Providing farm inputs as a subsidy can encourage agricultural productivity, support small-scale farmers, and boost the agricultural sector's overall growth and contribution to the economy. Unlike a loan or credit, which must be repaid, a subsidy does not require repayment, making it a direct form of assistance to farmers.

Which of the following processes does not lead to the physical disintegration of rock? 

Detalhes da Resposta

The options provided refer to various processes that can affect rocks. To understand which process does not lead to the physical disintegration of rocks, let's explore each one clearly.

Expansion and contraction of rock minerals: This process refers to changes in the size of rock minerals due to temperature fluctuations. When minerals heat up, they expand, and when they cool down, they contract. Over time, this can cause the rock to crack and break apart. Therefore, this process does cause physical disintegration.

Formation of cracks and crevices in the rocks: This directly involves the breaking apart of rocks into smaller pieces due to the creation of openings or splits. Hence, it leads to physical disintegration.

Heating and cooling of rock surface: Rocks on the Earth's surface undergo cycles of heating during the day and cooling at night. These temperature variations cause the rock to expand and contract, similar to the effect on the rock minerals, eventually leading to cracking and breaking apart. Thus, this also causes physical disintegration.

Rapid cooling and solidification of rocks: This process typically refers to how molten rock (magma or lava) cools and hardens to form solid rock. When it cools rapidly, it solidifies quickly and forms a hard structure. This process does not involve breaking apart or physical disintegration of existing rock structures. Rather, it is about the formation of new rock. Therefore, this process does not result in the physical disintegration of rocks.

In conclusion, the process that does not lead to the physical disintegration of rock is the rapid cooling and solidification of rocks.

The roles of government in the development of agriculture include the following except

Detalhes da Resposta

The roles of government in the development of agriculture include many supportive activities aimed at enhancing the sector's productivity and sustainability. Here's an explanation of the options:

• Provision of subsidies: This is a typical role of the government. Subsidies are financial supports that help reduce the cost for farmers to encourage increased production and sustainability of agriculture. By providing subsidies on seeds, fertilizers, or equipment, the government assists farmers in maintaining profitability.


• Establishment of farm settlements: Governments often develop farm settlements to facilitate agricultural activities. Such settlements are planned communities where farmers can benefit from shared resources like water, electricity, storage facilities, and other essential infrastructure, making farming more efficient.


• Training of farmers: This is a vital governmental role; however, the emphasis is on training the farmers themselves and not specifically their children. Governments implement training programs to educate farmers on modern farming techniques, pest control, crop rotation, and efficient resource management.


• Recommending loans: Governments play a significant role in facilitating financial support systems like loans. They may not directly recommend loans but often work to ensure farmers have access to low-interest loans through agricultural banks or cooperative societies. This helps farmers invest in necessary resources to improve their farming operations.

In this context, the exception is the "training of farmers' children." While it is important to have educational programs available for future generations in agriculture, direct involvement in the training of farmers' children is not a typical, direct role of the government within the context of immediate agricultural development support.

Gneiss is a metamorphic rock formed from?

Detalhes da Resposta

Gneiss is a type of metamorphic rock that primarily forms from the metamorphism of granite. Let's break this down to understand it better.

Metamorphic rocks are formed when existing rocks are subjected to high heat, high pressure, or chemically active fluids. This process, known as metamorphism, alters the mineral composition and structure of the original rock, also known as the parent rock or protolith.

Granite is an igneous rock composed mainly of quartz, feldspar, and mica. When granite undergoes metamorphism, typically deep within the Earth's crust where pressures and temperatures are high, it changes into a different kind of rock.

The specific conditions cause the minerals within the granite to align into bands or layers, giving gneiss its characteristic banded appearance. This banding is called "foliation."

While other types of rocks like slate, shale, and sandstone can also undergo metamorphism, they result in different metamorphic rocks. For instance:

• Slate forms from shale.
• Shale forms into slate and eventually into phyllite, schist, or gneiss under different conditions.
• Sandstone forms into quartzite.

In summary, gneiss is primarily the result of the metamorphism of granite.

Which of the following is an example of igneous rock?

Detalhes da Resposta

The correct answer is granite. Let me explain why:

Igneous rocks are formed from the cooling and solidification of magma or lava. They are one of the three main types of rocks, the other two being sedimentary and metamorphic rocks. Now, let’s briefly look at the options:

• Granite is a classic example of an igneous rock. It forms from the slow cooling of magma beneath the Earth’s surface, which allows large crystals to develop. This process gives granite its distinctive, coarse-grained texture.
• Sandstone is not an igneous rock. It is a sedimentary rock, formed from compacted sand-sized mineral particles or rock fragments.
• Limestone is also a sedimentary rock, primarily made of calcium carbonate, which originates from biological sources like shells or coral.
• Gneiss is a metamorphic rock, which means it forms from existing rocks that have been transformed by heat and pressure. It is characterized by its banding and does not originate from cooling magma or lava.

Therefore, based on the formation and characteristics, granite is the example of an igneous rock in the list.

Food shortage can be minimized by

Detalhes da Resposta

Food shortage is a significant issue that affects many parts of the world. One effective way to minimize food shortages is through the implementation of efficient pest control services. Pest control is critical because pests can destroy crops, leading to a substantial reduction in food supply. If pest populations are not managed, the damage to crops can be devastating, resulting in fewer yields. By using pest control services, farmers can protect their crops from insects, rodents, and other pests that threaten food production.

Here is a simple explanation of how efficient pest control can help minimize food shortages:

1. Protecting Crops: Efficient pest control services help in safeguarding plants from being consumed or damaged by pests. This means that more crops can be harvested and converted into food, helping to maintain an adequate food supply.

2. Improving Yield: When pest control measures are adopted, the quality and quantity of the harvest improve. Healthy crops mean more food can reach the market and consumers.

3. Promoting Sustainable Agriculture: By controlling pests efficiently, farmers can focus on sustainable farming practices rather than resorting to excessive chemical use. This approach not only protects the crops but also conserves the environment.

In conclusion, focusing on effective pest control is a key strategy in reducing food shortages. It plays a crucial role in protecting agricultural output, improving food quality, and ensuring that food supply remains stable and sufficient for the population.

Which of the following does not fit into the agricultural use of land

Detalhes da Resposta

The activity that does not fit into the agricultural use of land is mining. Here's why:

• Crop Production: This involves growing plants for food, fiber, and other uses. It requires preparing the land, planting seeds, and nurturing crops until harvest. This is a typical agricultural activity.
• Animal Production: This includes the raising of livestock, such as cattle, sheep, and poultry, for food, fiber, and other products. It is an integral part of agriculture.
• Forest Establishment: Although primarily not seen as agriculture, it can involve the planting and managing of forests for resources such as wood or to improve the environment, aligning it with sustainable land use practices in agriculture.
• Mining: This activity involves the extraction of minerals, ores, and resources from the Earth, which is fundamentally an industrial or geological activity, not related to agriculture. Mining does not typically contribute to the production of food or the management of land for biological growth.

Which of the following processes will not lead to the loss of nutrients from the soil?

Detalhes da Resposta

The process that will not lead to the loss of nutrients from the soil is mulching.

Here's a simple explanation of each process:

Leaching: This occurs when water (often from rain or irrigation) washes away nutrients from the soil into lower layers, making them unavailable to plants. This can result in a significant nutrient loss.

Harvesting: When crops are harvested, the nutrients that have accumulated in the plants' leaves, fruits, and other parts are removed from the environment, thus reducing the soil's nutrient content.

Erosion: This is the process where wind, water, or other natural agents wear away and move soil and its nutrients from one location to another, often leading to a reduction of soil fertility.

Mulching: This involves covering the soil with materials like straw, leaves, or wood chips. Mulching can help to retain soil moisture, reduce erosion, and enhance nutrient content as the mulch decomposes. Therefore, rather than causing nutrient loss, mulching adds nutrients back into the soil.

Which of the following statements is not correct about the land use act?

Detalhes da Resposta

The Land Use Act is a policy that was enacted to manage and regulate land ownership and use. Here is an exploration of each statement:

• The government having control over unused land is a correct aspect of the Land Use Act, as it gives the government the power to allocate land based on its use and development priorities.
• The statement that land cannot be used for any purpose is incorrect. The Land Use Act actually allows land to be used for various purposes as long as it aligns with government policies and provides for economic and social development. Restrictions are only placed to ensure proper planning and sustainable use.
• Another objective of the Land Use Act is indeed the re-allocation of land for farming purposes among other uses to promote agricultural activities and boost food production.
• The Act is deliberately structured to prevent land fragmentation by consolidating land ownership to ensure optimal use and prevent the consequences of excessive subdivision.

Thus, the statement that land cannot be used for any purpose is the one that is not correct about the Land Use Act, as the Act actually facilitates multiple uses of land.

Plant breeders aim at obtaining the following except

Detalhes da Resposta

Plant breeders are focused on improving the characteristics of plants to meet specific goals and demands. Here is an explanation of the aims listed, highlighting the one that is generally not a typical aim for breeders:

Adaptation to pollination: Plant breeders generally focus on adaptations that allow for more efficient pollination. This could involve traits that attract pollinators or improve the chances of successful fertilization.

Tolerance to climate extremes: A significant aim for breeders is to develop plants that can withstand adverse climate conditions like drought, frost, or extreme temperatures. This ensures that the plants can survive and produce fruits or seeds even under challenging environments.

Uniformity in the time of maturity: Breeders aim for uniform maturity so that the entire crop can be harvested at the same time, simplifying the harvesting process and improving efficiency.

Resistance to pests: This is a critical aim because it reduces the need for pesticides, lowers production costs, and increases yield by ensuring that plants are less susceptible to diseases and pest attacks.

The point that is generally not a focus of plant breeders is adaptation to pollination specifically in terms of adapting plants for their own pollination processes. While pollination is important, breeders are more focused on traits that enhance successful pollination rather than altering the plant to adapt specifically for that process.

The replacement of traditional farming methods with modern methods is a step in agricultural

Detalhes da Resposta

The replacement of traditional farming methods with modern methods is a step in agricultural development. This is because development involves improving and advancing the way things are done to increase efficiency, productivity, and sustainability. By introducing modern methods, farmers can benefit from higher yields, better resource management, and improved quality of agricultural products.

Modern agricultural methods include the use of advanced technology such as tractors, automated machinery, and precision farming tools, as well as techniques like genetic modification and advanced irrigation systems. These methods help to optimize the use of resources, reduce the time and labor needed, and minimize environmental impact.

Traditional methods, on the other hand, often rely on manual labor and are subject to limitations such as low yields, more susceptibility to pests, and inefficient use of resources. By adopting modern techniques, agriculture becomes more efficient, sustainable, and capable of meeting the needs of a growing population.

Therefore, transitioning from traditional to modern methods is a sign of progress and development in agriculture.