WAEC SSCE - Agricultural Science - 1995

The fertility of the soil is an important factor in the selection of site for a fish pond because a fertile soil will

Bayanin Amsa

A fertile soil is important for the selection of a site for a fish pond because it stimulates the growth of lower plants, which are sources of food to fish. When the soil is fertile, the plants growing in and around the pond will have access to necessary nutrients that they need to thrive. The plants will, in turn, produce more organic matter, which will support the growth of plankton and other microorganisms in the water. This increase in food will provide a suitable habitat for fish to grow, feed, and reproduce. Therefore, a fertile soil is crucial in promoting a healthy and productive ecosystem in a fish pond.

The study and management of forests and forest resources is known as

Bayanin Amsa

Forestry is the study and management of forests and forest resources. It involves the science and practice of creating, maintaining, and managing forests for various purposes such as conservation, recreation, timber production, and wildlife habitat. Forestry aims to strike a balance between economic, social, and ecological benefits of forest resources, and it includes activities such as planting and caring for trees, managing forest ecosystems, protecting forests from pests and diseases, and harvesting timber in a sustainable manner.

Inhibition of root and bark development, fruiting and seed formation in crops is due to the deficiency of

Bayanin Amsa

Which of the following is not an effect of grazing on the soil?

Bayanin Amsa

The correct answer is "increase in soil acidity." Grazing can have various effects on soil, such as exposing it to erosion, destroying soil structure, and reducing the rate of water percolation. However, grazing does not directly cause an increase in soil acidity. Grazing animals can produce acidic urine, but this is generally balanced by the alkaline effect of their dung. Therefore, grazing does not directly lead to an increase in soil acidity.

Flood irrigation is mainly used in

Bayanin Amsa

Flood irrigation is mainly used in arid areas. In this type of irrigation, water is allowed to flow over the surface of the soil to wet the plants. This is a very old and simple method of irrigation that is still used today in areas where there is not enough water for other types of irrigation systems. Flood irrigation is effective in arid areas because it allows water to be distributed over a large area, and the water can seep down into the soil to reach the roots of the plants.

Molasses is a major by-product obtained after the processing of

Bayanin Amsa

Molasses is a major by-product that is obtained after the processing of sugarcane. When sugarcane is processed to extract sugar, the juice is boiled to remove the water content and concentrate the sugar. Molasses is the thick, syrupy residue that is left behind after the sugar crystals have been removed. It is often used in animal feed as a source of energy and as a binding agent in feed pellets. It can also be used in the production of alcohol, rum, and other distilled spirits.

The quantity of rice that an individual is able to buy during a given period of time is simply the individual's

Bayanin Amsa

The discontinuation of feeding young animal with milk is known as

Bayanin Amsa

The gestation period in days of a sow is

Bayanin Amsa

The gestation period in days of a sow is 114. The gestation period refers to the length of time between fertilization and birth. In the case of a sow, this is the period of time that the piglets develop inside the mother's womb. The gestation period of a sow is approximately 3 months, 3 weeks, and 3 days or 114 days. This is an important factor to consider for pig farmers as it determines the timing of farrowing and other management practices related to reproduction.

Farm-gate price is usually obtained through

Bayanin Amsa

Farm-gate price is usually obtained through the producer. The term "farm-gate price" refers to the price that a farmer receives for their produce at the farm gate, before any additional costs such as transportation, storage, and marketing are added. This price is negotiated directly between the farmer and the buyer, which could be a middleman, commodity board, co-operative, or wholesaler. However, in general, the producer is the one who sets the initial farm-gate price.

Which of the following is not a reason for preferring rotational grazing to continuous grazing?

Bayanin Amsa

The reason for not preferring rotational grazing to continuous grazing is "avoiding excessive amount of organic manuring." Rotational grazing involves the movement of livestock from one paddock to another in a planned sequence. This helps to avoid overgrazing in a particular area and allows time for pasture regrowth, which can result in more uniform quality of herbage, persistence of desired species, breaking the life-cycle of some pests, and avoiding build-up of livestock pests. However, rotational grazing can also lead to excessive accumulation of animal waste in a particular area, which can result in soil compaction, nutrient imbalance, and potential environmental issues. Therefore, it is important to manage rotational grazing properly to avoid excessive accumulation of organic matter in one area.

In underground drainage

Bayanin Amsa

In underground drainage, water seeps into the tiles to reach an outlet where water is disposed. Underground drainage is a method of removing excess water from the soil through a system of buried tiles, which are porous and allow water to seep through. These tiles are laid out in a network of drains or channels, leading to an outlet or a collection point where water can be disposed of. The water is directed away from the crop roots and towards a designated disposal area, preventing waterlogging and soil saturation that can damage crops.

Yams stored in a barn should be inspected at least once a week to

Bayanin Amsa

Which of the following will be responsible for the poor yield of fertile soil in a high rainfall area?

Bayanin Amsa

In a high rainfall area, the poor yield of fertile soil may be due to leaching of soil nutrients. This occurs when there is excessive rainfall, which causes the nutrients in the soil to be washed away, leaving the soil nutrient-deficient. When this happens, the plants growing on the soil will not have the necessary nutrients for growth and development, which can lead to poor yield. The other options, such as low pH, lack of soil microbes, high alkalinity, and erosion, can also affect agricultural productivity, but they may not be specifically related to high rainfall areas.

The mode of infection of rinderpest disease in cattle id through

Bayanin Amsa

Which of the following diseases of crops causes stunting in maize?

Bayanin Amsa

The female sex hormone that is responsible for oestrus in farm animal is called

Bayanin Amsa

The female sex hormone that is responsible for oestrus in farm animals is called "oestrogen". Oestrogen is produced by the ovaries and plays a key role in regulating the female reproductive system. It stimulates the development of the reproductive tract and secondary sexual characteristics, and triggers the onset of oestrus, which is the period of sexual receptivity in female animals. During oestrus, the female is ready to mate with a male and conceive offspring.

N'dama cattle are well adapted to West Africa mainly because the breed

Bayanin Amsa

N'dama cattle are well adapted to West Africa mainly because the breed is resistant to trypanosomiasis. Trypanosomiasis is a deadly disease that affects both humans and animals, and is caused by a parasite transmitted by the tsetse fly. It is prevalent in West Africa, making it challenging to rear livestock in the region. However, N'dama cattle have developed resistance to the disease over time, making them better adapted to the environment. This has made N'dama cattle a valuable breed in the region, as they provide a source of food and income for the local communities.

The loss in value of an asset due to wear and tear in the course of its use is known as

Bayanin Amsa

Depreciation is the loss in value of an asset over time due to wear and tear or obsolescence resulting from its use in the normal course of business. It reflects the decrease in an asset's value over time, which is recorded as an expense on a company's income statement. This decrease in value is due to factors such as age, wear and tear, and obsolescence, and it affects the asset's book value or carrying value. Depreciation is important in financial accounting because it helps to accurately reflect the true value of assets on a company's balance sheet.

Which of the following characteristic is not normally considered in the selection of animal for breeding?

Bayanin Amsa

The characteristic that is not normally considered in the selection of animal for breeding is horn size. This is because the size of the horn does not have a significant impact on the animal's productivity or ability to produce quality offspring. The other characteristics listed, such as fertility, growth rate, resistance to disease, and milk quality and quantity, are all important factors that are typically considered in the selection of animals for breeding to ensure that the next generation of animals will be healthy, productive, and profitable.

A characteristic feature of subsistence agriculture is

Bayanin Amsa

Subsistence agriculture is a type of agriculture where the main aim is to produce enough food to sustain the farmer and their family. Therefore, a characteristic feature of subsistence agriculture is that the labour needed for farming is usually provided by the farm family themselves. This means that family members are often involved in various aspects of farming, such as planting, weeding, and harvesting. The focus is not on making a profit but on producing enough food to meet the needs of the family.

Air sacs are present in

Bayanin Amsa

Air sacs are present in poultry. Poultry, such as chickens, have a unique respiratory system that includes not only lungs but also air sacs. These air sacs are connected to the lungs and extend throughout the body cavity, allowing for efficient gas exchange and respiratory function. Air moves through the lungs and air sacs in a continuous, one-way flow, which helps birds to obtain oxygen and remove carbon dioxide more effectively than other animals with a less complex respiratory system. Therefore, air sacs are a key feature of the respiratory system of poultry, enabling them to have efficient gas exchange and support their high metabolic rate.

The main function of ground maize in livestock feed is for

Bayanin Amsa

Ground maize, also known as cornmeal, is a common ingredient in livestock feed. Its main function is to provide energy to the animals. Maize contains high levels of carbohydrates, which are easily digestible and can be converted into energy by the animal's body. This energy is necessary for the animal to carry out its normal activities, including growth, reproduction, and movement. While maize does contain some protein, it is not a significant source of building blocks for the animal's body. Other feed ingredients, such as soybean meal or alfalfa, are typically added to provide the necessary proteins for body building. Ground maize also helps to add bulk to the feed, making it more filling and providing the animal with a sense of satiety.

Rice bran is usually obtained from the paddy after

Bayanin Amsa

Jute, cotton and sisal are

Bayanin Amsa

Jute, cotton and sisal are classified as fiber crops. Fiber crops are plants cultivated for their fibers, which are used to make various products such as textiles, paper, and rope. Jute is a long, soft, and shiny fiber that is commonly used in the production of burlap sacks and twine. Cotton is a soft, fluffy fiber that grows in a boll, and is widely used in the textile industry. Sisal is a tough, hard fiber that is commonly used for making rope and twine.

The factors affecting formation of soil include the following except

Bayanin Amsa

The most common soil mineral found in all crystalline rocks and a main constituent of granite and sandstone is

Bayanin Amsa

The most common soil mineral found in all crystalline rocks and a main constituent of granite and sandstone is quartz. This mineral is very abundant on the earth's crust and it is formed by the combination of silicon and oxygen. Quartz is known for its durability and resistance to weathering, which makes it a common component of soils and sediments. It is also used in a variety of industrial applications, such as construction, electronics, and glassmaking.

Which of the following will retain the greatest amount of water?

Bayanin Amsa

Clay will retain the greatest amount of water compared to the other options. This is because clay has smaller particles than sand or silt, which allows it to hold more water due to the greater surface area available for water molecules to bond to. Clay soils can retain water for longer periods of time, which can be beneficial for plant growth during dry periods. In contrast, sandy soils have larger particles with fewer surfaces available for water bonding, causing water to drain away more quickly. Loam soils are a mixture of sand, silt, and clay, and can have varying water retention capacities depending on the ratio of the soil components.

Control of water level in a fish pond with minimal loss of fish can be achieved with the aid of

Bayanin Amsa

The best option for controlling water level in a fish pond with minimal loss of fish is a "monk with panel, screens and outlet channel". A monk is a structure that controls the flow of water in a pond. With a monk, water can be drained from the pond while the fish are kept safe in a compartment created by screens and panels. This method is effective in preventing fish from being carried away with the water during drainage. Wooden panels alone or wooden panels with screens may not be as effective in controlling the flow of water as the monk method. Similarly, using only screens or a monk without an outlet channel may not provide the necessary drainage required for the pond.

When individual crop with desired characteristic mostly favoured by the environment are chosen for breeding this type of breeding is referred to as

Bayanin Amsa

The type of breeding described in the question is called "selection". Selection involves choosing individual plants with desired traits from a population of plants and using them to produce the next generation. This can be done over many generations to develop a population of plants with consistently desirable traits. In this type of breeding, plants that already have desirable traits that are well-adapted to their environment are chosen for breeding to develop a new population of plants with those desirable traits. This method is commonly used in agriculture to develop new crop varieties that have improved yield, disease resistance, or other desirable traits.

Which of the following factors has the greatest influence on crop production?

Bayanin Amsa

Which of the following is not an edaphic factor affecting agricultural production?

Bayanin Amsa

The edaphic factors are soil factors that affect agricultural production. Predators, on the other hand, are not related to soil but are biotic factors that may affect agricultural production. Therefore, predators is the answer as it is not an edaphic factor affecting agricultural production.

The water-snail is important in the life-cycle of

Bayanin Amsa

The water-snail is important in the life-cycle of a liver fluke. The liver fluke is a parasitic flatworm that infects the liver of various animals, including humans. The adult fluke releases its eggs in the bile ducts of the host, which are then excreted through feces. The eggs hatch in water, and the larvae infect snails. Inside the snail, the larvae multiply and undergo a series of developmental stages, eventually emerging as infectious forms that can infect other animals, including humans, through the consumption of contaminated water or vegetation. Therefore, the water-snail plays a crucial role in the life-cycle of the liver fluke by serving as an intermediate host for the parasite.

A major routine operation in cowpea production which normally starts from flowering stage is

Bayanin Amsa

Male spermatozoa is produced in the

Bayanin Amsa

The anti-sterility vitamin in livestock nutrition is vitamin

Bayanin Amsa

The anti-sterility vitamin in livestock nutrition is vitamin E. Vitamin E is an important antioxidant nutrient that protects body tissues from damage caused by free radicals. In livestock, it plays a crucial role in maintaining reproductive health and preventing infertility, hence its name "anti-sterility vitamin." It also helps in improving the immune system, preventing muscle disorders, and promoting healthy skin and hair.

The most important factor that determines the rate of agriculture development in a country is the

Bayanin Amsa

The readiness of farmers to adopt viable agricultural research results is the most important factor that determines the rate of agriculture development in a country. Agricultural research is a key driver of innovation and technology adoption in agriculture. The success of agriculture largely depends on the ability of farmers to use modern technologies and techniques to improve yields, reduce losses, and increase profits. The readiness of farmers to adopt viable agricultural research results is crucial because it determines how fast new technologies and techniques can be introduced and spread across the farming community. The more willing farmers are to adopt new methods and technologies, the faster agriculture development will occur in the country.

Crop rotation has the following effects on the soil except

Bayanin Amsa

Crop rotation has numerous benefits on the soil, including maintenance of soil fertility, reducing concentration of soil pests, improving soil structure, and reducing soil erosion. However, crop rotation does not predispose the soil to leaching. In fact, crop rotation can help to reduce leaching by improving soil structure, increasing soil organic matter, and reducing soil compaction. So, the correct option is "predisposing soil to leaching".

A soil with pH2 can be described as

Bayanin Amsa

A soil with a pH of 2 is highly acidic. The pH scale ranges from 0 to 14, where 7 is neutral, values below 7 are acidic, and values above 7 are alkaline. A pH of 2 is very low on the scale, indicating that the soil is highly acidic. Highly acidic soils can be harmful to plant growth as they can limit the availability of nutrients essential for plant growth. It is important to adjust soil pH to the appropriate range for the type of plants being grown.

A metamorphic limestone is

Bayanin Amsa

A metamorphic limestone is marble. Marble is a type of rock that forms when limestone, a sedimentary rock made of calcite or aragonite minerals, undergoes high pressure and heat over a long period of time. This process, called metamorphism, causes the limestone to recrystallize and change into a harder, more dense rock with a characteristic smooth and shiny surface. Marble is commonly used in architecture and sculpture due to its beauty, durability, and workability.

Which of the following is not a method or agent of disseminating agricultural information?

Bayanin Amsa

Agricultural finance is not a method or agent of disseminating agricultural information. Agricultural finance refers to the financial services provided to farmers or agribusinesses for agricultural purposes, such as loans, insurance, and investments. In contrast, the other options mentioned are all methods or agents of disseminating agricultural information, including individual contact (such as farmer field schools), agricultural programmes (such as extension services), marketing channels (such as market information systems), and co-operative societies (such as farmer organizations).

The mesocrap of an oil palm fruit is

Bayanin Amsa

The mesocarp of an oil palm fruit refers to the fleshy, fibrous layer between the outer skin and the hard inner shell. It is commonly referred to as the "pulp" and contains the majority of the oil produced by the fruit. The other parts of the fruit include the nut (which contains the kernel), the shell (the hard outer layer), and the seed (which is the whole fruit, including the shell and kernel).

Blackarm is a bacterial disease of

Bayanin Amsa

Blackarm is a bacterial disease that affects cotton. It is caused by the bacterium Xanthomonas campestris pv. malvacearum. The disease affects the leaves, stems, and bolls of the cotton plant, causing dark, water-soaked lesions that can eventually lead to defoliation and yield loss. The bacteria can survive in soil and plant debris, and can be spread by wind, rain, and agricultural practices such as pruning and harvesting.

Which of the following is not a characteristic of a good pasture?

Bayanin Amsa

The option that is not a characteristic of a good pasture is "low leaf to stem ratio". A good pasture should have a high leaf to stem ratio because the leaves are the most palatable and nutritious part of the plant. High palatability, high nutritive value, high digestibility, and high resistance to trampling are all desirable characteristics of a good pasture. High palatability ensures that animals will consume enough forage, high nutritive value ensures that the forage meets the animal's nutritional requirements, high digestibility ensures that the animal can utilize the nutrients in the forage efficiently, and high resistance to trampling ensures that the pasture can withstand the grazing pressure from animals without being damaged.

The most suitable soil for cultivating yam is

Bayanin Amsa

Yam is a tuber crop that requires a well-drained soil that is rich in organic matter. The most suitable soil for cultivating yam is a well-drained loamy soil with a good amount of organic matter. This type of soil is called clay loam, which is a mixture of sand, silt, and clay. Clay loam has good water retention capacity and provides a favorable environment for the growth of yam. Additionally, it is important to note that the soil pH should be between 5.5 and 6.5 for optimum growth of yam.

Land in agricultural business is said to be a dural asset. This means land

Bayanin Amsa

The castrated male cattle is referred to as

Bayanin Amsa

The castrated male cattle is referred to as a "steer." When a male cow is castrated before reaching sexual maturity, it is called a steer. Steers are often raised for meat production, as they tend to gain weight quickly and have a calm disposition, making them easier to handle. They do not develop the physical characteristics of an adult bull and are typically smaller in size.

The newly introduced government agricultural programme in Nigeria is

Bayanin Amsa

The amount of livestock feed needed to prevent either an increase or a decrease in live weight of an animal is referred to as

Bayanin Amsa

The amount of feed that is needed to maintain the live weight of an animal, without causing an increase or a decrease in weight, is called the maintenance ration. This means that the animal is neither gaining nor losing weight, but is simply maintaining its current weight. The maintenance ration is important because it ensures that the animal is getting the necessary nutrients to maintain its body functions and perform its daily activities, without being overfed or underfed. The other options listed are specific types of rations for different categories of animals, such as weaners, breeders, and animals in production, which require different levels and types of nutrients to support their growth and reproductive processes.

The major difference between loan and subsidy is that

Bayanin Amsa

The major difference between loan and subsidy is that a loan is money borrowed from a lender which must be paid back with interest, while a subsidy is financial assistance given by the government to reduce the cost of a particular product or service. A subsidy does not have to be repaid, and it can be given to both individuals and businesses to encourage specific activities or behaviors. On the other hand, a loan must be repaid within a specified period, and the borrower is usually required to pay interest on the amount borrowed.

(a) (i) Explain the term surface drainage. (ii)List three disadvantages of surface drainage

(b)(i) Define irrigation. (ii) State two aims of irrigation. (iii) List five problems associated with irrigation.

Bayanin Amsa

(a)
(i) Surface drainage is the process of removing excess water from the surface of the soil or land. It involves creating channels or ditches to allow water to flow away from the land or crop. The purpose of surface drainage is to prevent waterlogging, soil erosion, and other problems caused by excessive water on the surface.
(ii) Three disadvantages of surface drainage are:
1. Increased risk of drought: Drainage removes water from the soil, which can lead to drought conditions in the area.
2. Environmental degradation: Surface drainage can cause soil erosion and nutrient loss, leading to environmental degradation.
3. Cost and maintenance: Building and maintaining drainage systems can be expensive and time-consuming.

(b)
(i) Irrigation is the process of artificially supplying water to crops or plants to meet their water needs. This is done using various methods such as sprinklers, drip irrigation, or flood irrigation.
(ii) The two aims of irrigation are:
1. To provide water to crops in dry areas where rainfall is insufficient for crop growth.
2. To increase crop yield and quality by ensuring that crops receive the optimal amount of water.
(iii) Five problems associated with irrigation are:
1. Salinization: Irrigation can lead to the accumulation of salt in the soil, which can be harmful to plants.
2. Waterlogging: Over-irrigation can lead to waterlogging, which can drown plants and cause root rot.
3. Depletion of groundwater: Overuse of groundwater for irrigation can lead to depletion of water resources.
4. Energy use: Irrigation systems require energy to pump and distribute water, which can contribute to greenhouse gas emissions.
5. Cost and maintenance: Building and maintaining irrigation systems can be expensive and require ongoing maintenance to ensure proper function.

In a tabular form, state: (a) four food nutrients in livestock production: (b) two sources of each food nutrient stated in (a); (c) two functions of each nutrient stated in (a)

Bayanin Amsa

Sure! Here is the table you requested:

I hope this helps!

(a) List ten tools or equipment used in a dairy cattle farm.

(b) Name three harmful contaminants of milk in a dairy farm.

(c) Explain briefly three precautions which must be taken in order to obtain or produce clean milk

Bayanin Amsa

a) Ten tools or equipment used in a dairy cattle farm include:

1. Milk bucket or container
2. Milk strainer
3. Milking machine
4. Udder wipes or towels
5. Teat dip or spray
6. Hoof trimmers
7. Feed mixer or grinder
8. Water trough or dispenser
9. Manure scraper
10. Milking parlor or stanchion

b) Three harmful contaminants of milk in a dairy farm are:

1. Antibiotics residue
2. Pathogenic bacteria like E. coli, Salmonella, and Listeria
3. Chemical contaminants like pesticides and cleaning agents

c) Three precautions which must be taken in order to obtain or produce clean milk are:

1. Maintain cleanliness: The udder, teats, and milking equipment should be kept clean to avoid contamination.
2. Proper milking procedure: Milking should be done with proper technique, starting with stripping to clear any bacteria or debris from the teats.
3. Monitoring and testing: Regular testing of milk for contaminants, such as antibiotics, and monitoring cow health can help prevent contamination of milk.

(a) What is Agricultural Extension? (b) Enumerate seven roles of an Agricultural Extension Worker.

Bayanin Amsa

---------------------------

Agricultural extension is a system of providing agricultural education and advisory services to farmers and other stakeholders in the agricultural sector. It is aimed at transferring knowledge, skills and new technologies to farmers to improve their production, income and standard of living.

The roles of an agricultural extension worker are:

1. Technology transfer: Agricultural extension workers help farmers to adopt new agricultural technologies that will improve their production and income.
2. Training: Extension workers provide training to farmers on how to use new technologies, crop and livestock management practices, marketing strategies, and other relevant skills.
3. Farm management: They provide advice on farm management practices such as crop rotation, soil conservation, and pest management.
4. Marketing: Extension workers help farmers to identify and access markets for their products, and to negotiate better prices.
5. Community development: They work with communities to identify their needs and develop programs that address their specific challenges.
6. Policy advocacy: Extension workers advocate for policies that support the development of agriculture, and provide input to policy-makers on issues affecting farmers and rural communities.
7. Research: They work with research institutions to identify new technologies and practices that can improve agricultural production, and to test and adapt these innovations to local conditions.

In summary, agricultural extension is a vital component of the agricultural sector, and agricultural extension workers play a crucial role in promoting sustainable agriculture and rural development.

---------------------------

With the aid of a labelled diagram, describe briefly the nitrogen cycle.

            Nitrogen Fixation
                N2 + 3H2 -> 2NH3
                        NH3
                         |
                     Nitrification
                    NH3 -> NO2- -> NO3-
                    Assimilation
                         |
                    NH3, NO3-
                         |
                    Amino acids, proteins, etc.
                 Ammonification
                      Organic nitrogen
                          |
                          NH3
                 Denitrification
                        NO3-
                         |
                NO2-, NO, N2O, N2
                         |
                         N2

Bayanin Amsa

The nitrogen cycle is a natural process that involves the transformation of nitrogen from one form to another. Nitrogen is a crucial element required for the growth and development of plants and other living organisms. However, nitrogen in its gaseous form (N₂) cannot be used by plants directly. Therefore, it has to be converted into other forms such as ammonia, nitrate, and nitrite, which plants can absorb and use.

The nitrogen cycle can be divided into several steps:

1. Nitrogen Fixation: The first step in the nitrogen cycle is nitrogen fixation. Nitrogen gas (N₂) is converted into ammonia (NH₃) by nitrogen-fixing bacteria such as Rhizobium found in the root nodules of legumes like beans and peas. Some free-living bacteria like Azotobacter and Clostridium also fix atmospheric nitrogen.
2. Nitrification: The next step is nitrification, where ammonia (NH₃) is converted into nitrite (NO₂^-) and then into nitrate (NO₃^-) by nitrifying bacteria. Nitrate is the form of nitrogen that is most commonly taken up by plants.
3. Assimilation: Assimilation is the process by which plants and animals absorb nitrogen in the form of ammonia, nitrate, and other nitrogen compounds to synthesize amino acids, proteins, and other nitrogen-containing organic molecules.
4. Ammonification: Ammonification is the process by which decomposers like bacteria and fungi break down nitrogen-containing organic matter such as dead plants and animals and release ammonia into the soil.
5. Denitrification: Denitrification is the final step in the nitrogen cycle, where nitrate (NO₃^-) is converted back into gaseous nitrogen (N₂) by denitrifying bacteria under anaerobic conditions in soil and water.

Here is a labelled diagram of the nitrogen cycle:

            Nitrogen Fixation
                N2 + 3H2 -> 2NH3
                        NH3
                         |
                     Nitrification
                    NH3 -> NO2- -> NO3-
                    Assimilation
                         |
                    NH3, NO3-
                         |
                    Amino acids, proteins, etc.
                 Ammonification
                      Organic nitrogen
                          |
                          NH3
                 Denitrification
                        NO3-
                         |
                NO2-, NO, N2O, N2
                         |
                         N2

Overall, the nitrogen cycle is an essential process that enables the conversion of atmospheric nitrogen into forms that

(a) (i) Explain marketing in agriculture. (ii) Mention five stages involved in marketing agricultural produce (b) Describe briefly four agents of marketing

Bayanin Amsa

---------------------------

(a)

(i) Marketing in agriculture refers to the process of bringing agricultural products from the point of production to the point of consumption. It involves activities such as buying, selling, processing, transporting, and storing agricultural products. The goal of agricultural marketing is to ensure that agricultural products are available to consumers in the right quantity, quality, and price.

(ii) The five stages involved in marketing agricultural produce are:

1. Production: This is the stage where farmers produce agricultural goods.
2. Harvesting: After the crops have been produced, they are harvested and prepared for market.
3. Transportation: The agricultural products are transported from the point of production to the market. This may involve road transport, rail transport, water transport, or air transport.
4. Processing: The agricultural products may need to be processed before they are sold. For example, fruits may need to be canned or dried, and grains may need to be milled or packaged.
5. Marketing: The agricultural products are sold to consumers in the market. This involves activities such as pricing, advertising, and distribution.

(b) The four agents of marketing are:

1. Farmers: Farmers are the primary agents of agricultural marketing. They are responsible for producing agricultural products.
2. Wholesalers: Wholesalers buy agricultural products in bulk from farmers and sell them to retailers.
3. Retailers: Retailers buy agricultural products from wholesalers and sell them to consumers. They are the final link in the marketing chain.
4. Processors: Processors buy agricultural products from farmers and wholesalers and process them into finished products. These finished products are then sold to retailers or directly to consumers.

---------------------------

Write short notes on each of the following: (a) tractors; (b) incubators; (c) sprayers, (d) shelters

Bayanin Amsa

(a) Tractors: Tractors are versatile farm machines that are used for various operations such as plowing, tilling, planting, and harvesting. They are powerful machines that are designed to provide high torque and pulling capacity, making them ideal for use on farms. Tractors are usually equipped with a three-point hitch that enables the attachment of different implements such as plows, cultivators, and harrows, making them very versatile. Tractors can be powered by gasoline, diesel, or electric motors, and they come in various sizes and configurations to meet different farm needs.

(b) Incubators: Incubators are machines that are used to hatch eggs artificially. They are designed to provide the ideal conditions for the development of embryos in eggs, such as temperature, humidity, and ventilation. Incubators come in various sizes, from small ones for home use to large ones for commercial hatcheries. They are usually equipped with a thermostat, a timer, and an egg turner to ensure that the eggs are incubated under optimal conditions.

(c) Sprayers: Sprayers are farm machines that are used to apply chemicals such as pesticides, herbicides, and fertilizers to crops. They are designed to ensure that the chemicals are applied evenly and at the right rate to achieve maximum efficacy. Sprayers can be either hand-operated or motorized, and they come in various sizes and configurations to meet different farm needs. They are usually equipped with a tank for holding the chemicals, a pump for pressurizing the tank, and nozzles for spraying the chemicals.

(d) Shelters: Shelters are structures that are used to provide protection to livestock or crops from adverse weather conditions such as rain, wind, and extreme temperatures. They can be made of various materials such as wood, metal, or plastic, and they come in different sizes and configurations. Shelters can be either permanent or temporary, depending on the farm needs. They are designed to provide a comfortable and safe environment for livestock or crops, thus promoting their growth and productivity.

 (a) Discuss briefly the rosette disease of groundnut under the following headings: (i) causal organism: (ii) symptoms  (iii) method of transmission; (iv) damage done (v) preventive and control measures.

(b) Assuming the spacing of a g vegetable crop per stand is 30 cm x 30 cm, calculate the plant population expected in a portion of land measuring 60 m x 30 m

Bayanin Amsa

(a) Rosette disease:

(i) Causal organism: Rosette disease is caused by a virus called Groundnut Rosette Virus (GRV). It is transmitted from plant to plant by an insect vector known as the groundnut aphid (Aphis craccivora).

(ii) Symptoms: Infected plants show symptoms such as excessive branching, development of small leaves, and the formation of rosettes (bunches of small leaves at the top of the plant). The pods are also small and poorly developed.

(iii) Method of transmission: The groundnut aphid is the vector that transmits the virus from plant to plant. It feeds on infected plants and carries the virus to healthy plants.

(iv) Damage done: The virus causes significant yield losses in groundnut production. Infected plants have reduced growth, low yields, and poor-quality pods.

(v) Preventive and control measures: The following measures can be taken to prevent and control the spread of Rosette disease: planting of disease-resistant varieties, crop rotation, intercropping with non-host crops, destruction of infected plants, and use of insecticides to control the groundnut aphid vector.

(b) Calculation of plant population:

To calculate the plant population expected in a portion of land measuring 60 m x 30 m with a spacing of 30 cm x 30 cm, we need to convert the dimensions of the land into centimeters. 60 m x 30 m = 6000 cm x 3000 cm.

Next, we calculate the area of the land in square centimeters: 6000 cm x 3000 cm = 18,000,000 square centimeters.

To calculate the number of plants per square meter, we need to divide the area of each plant (30 cm x 30 cm = 900 square centimeters) by the area of one square meter (100 cm x 100 cm = 10,000 square centimeters).

So, the number of plants per square meter is: 10,000 square centimeters / 900 square centimeters = 11.11 plants per square meter.

Finally, to calculate the plant population expected in the portion of land, we multiply the number of plants per square meter by the total area of the land: 11.11 plants per square meter x 18,000 square meters = 199,980 plants.

Therefore, we can expect a plant population of approximately 199,980 in a portion of land measuring 60 m x 30 m with a spacing of 30 cm x 30 cm.

(a)Give two examples of crops belonging to each of the following groups of crops (i) cereals; (ii) roots and tubers, (iii) legumes; (iv) vegetables; (v) fruits; (vi) beverages; (vii) fibres: (viii) oil crops.

(b) Discuss briefly the production of tomato under the following heading: (i) sowing method; (ii) transplanting: (iii) varieties; (iv) harvesting

Bayanin Amsa

(a)

• (i) Cereals: rice, maize
• (ii) Roots and tubers: cassava, yam
• (iii) Legumes: beans, cowpea
• (iv) Vegetables: cabbage, lettuce
• (v) Fruits: mango, pineapple
• (vi) Beverages: coffee, tea
• (vii) Fibres: cotton, jute
• (viii) Oil crops: palm oil, soybean

(b)

• (i) Sowing method: Tomato seeds are usually sown in seedbeds or trays, and then transplanted to the field after about 4-6 weeks.
• (ii) Transplanting: Tomato seedlings are transplanted to the field when they have grown to a height of about 15-20cm. This is usually done early in the morning or late in the afternoon to avoid heat stress on the seedlings.
• (iii) Varieties: There are several varieties of tomato, each with its unique characteristics such as size, shape, color, taste, and disease resistance. Some of the popular varieties include Roma, Beefsteak, Cherry, and Heirloom.
• (iv) Harvesting: Tomatoes are usually harvested when they are fully ripe, firm, and have attained their desired color. This is usually done by handpicking or by using special tools such as clippers or knives. The harvested fruits are then sorted, graded, and packed for transportation to the market.

In summary, tomato production involves sowing the seeds in seedbeds or trays, transplanting the seedlings to the field, selecting suitable varieties, and harvesting the fruits when they are fully ripe.

(a) List six problems of agricultural development in Nigeria

(b) State five possible solutions to the problems of agricultural development listed in (a).

(c) Explain five ways in which inadequate storage and processing facilities have affected agricultural development in Nigeria.

Bayanin Amsa

(a) Six problems of agricultural development in Nigeria are:

1. Inadequate funding and support from the government.
2. Poor infrastructure, such as roads and electricity.
3. Climate change and environmental degradation.
4. Limited access to modern farming technologies and practices.
5. Inadequate storage and processing facilities.
6. Insecurity and conflicts in some parts of the country.

(b) Five possible solutions to the problems of agricultural development are:

1. Increased government funding and support for agriculture.
2. Improved infrastructure, including roads, electricity, and irrigation systems.
3. Adoption of modern farming technologies and practices.
4. Establishment of agro-processing industries to add value to agricultural products.
5. Promotion of peace and security in all parts of the country.

(c) Inadequate storage and processing facilities have affected agricultural development in Nigeria in the following ways:

1. Post-harvest losses: The lack of proper storage facilities results in a significant amount of crops being wasted due to spoilage and damage from pests and rodents. This reduces the income of farmers and discourages them from investing in agriculture.
2. Price instability: Inadequate processing facilities result in a lack of value-added products, leading to unstable prices for agricultural products. This can cause farmers to receive lower prices for their products, which can discourage them from continuing with agriculture.
3. Limited market opportunities: Due to inadequate storage and processing facilities, farmers have limited access to markets, particularly those located far from their farms. This reduces their potential income and discourages them from investing in agriculture.
4. Poor quality products: Inadequate storage and processing facilities can result in poor quality products, which can be rejected by buyers. This reduces the income of farmers and discourages them from investing in agriculture.
5. Reduced competitiveness: Due to inadequate storage and processing facilities, Nigerian agricultural products may not meet international standards, reducing their competitiveness in the global market. This reduces the income of farmers and the country's overall economic growth.