WAEC SSCE - Agricultural Science - 2020

Which of the following statement is not true about farming in West Africa?

Maelezo ya Majibu

The statement that is not true about farming in West Africa is "mechanisation is fully adopted." Farming in West Africa is predominantly manual, and farm labour is highly inefficient. This is because most farmers in the region lack access to modern farming technologies, such as tractors, harvesters, and irrigation systems. As a result, they rely on traditional farming methods, which are time-consuming and labor-intensive. Farm workers in West Africa are often poorly paid, and getting reliable labour is difficult. Many farmers in the region cannot afford to pay their workers a decent wage, and this, coupled with the lack of access to social protection programs, makes it difficult for farm workers to make ends meet. However, contrary to the options given, mechanisation is not fully adopted in West Africa. The high cost of modern farming equipment and limited access to credit facilities means that many farmers cannot afford to purchase modern farm equipment. This is compounded by the fact that the terrain in many parts of West Africa is not suitable for mechanised farming. In summary, while farm labour is highly inefficient, farm workers are poorly paid, and getting reliable labour is difficult, mechanisation is not fully adopted in West Africa.

An important reason for staking yam is to?

Maelezo ya Majibu

An agricultural system which combines crop production with forest establishment is known as?

Maelezo ya Majibu

The agricultural system that combines crop production with forest establishment is called "taungya farming." In taungya farming, farmers grow crops like maize, beans, or vegetables alongside the establishment of a forest. The forest is established by planting trees in between the crops, which helps to improve soil quality, reduce erosion, and provide shade for the crops. Once the crops have been harvested, the trees continue to grow, providing timber and other forest products. This system is commonly used in tropical regions where there is a high demand for food and timber but limited land available for cultivation.

Quarantine measures in agriculture are aimed at?

Maelezo ya Majibu

Rickets in farm animals can be controlled by?

Maelezo ya Majibu

Which of the following diseases of tomato is caused by nematode?

Maelezo ya Majibu

A nation exports agricultural produce mainly to?

Maelezo ya Majibu

The cropping system illustrated in the table is?

Maelezo ya Majibu

A pest that attacks stored maize grain is?

Maelezo ya Majibu

A pest that attacks stored maize grain is a rodent. Rodents such as mice and rats are attracted to stored grains like maize because they provide a source of food and shelter. These pests can cause significant damage to stored maize grain by feeding on the kernels and contaminating the grain with their feces and urine, which can lead to mold growth and spoilage. Infestations can also result in significant economic losses for farmers and food storage facilities. Therefore, it is important to implement effective pest control measures to prevent and manage rodent infestations in stored maize grain.

A total of 12,000kg of maize was demanded at N20 per kg while 8,000kg of it was demanded at N30 per kg. What is the percentage change in quantity demanded?

Maelezo ya Majibu

To find the percentage change in quantity demanded, we need to calculate the difference between the initial quantity demanded and the final quantity demanded, divide that difference by the initial quantity demanded, and then multiply the result by 100%. The initial quantity demanded is 12,000kg, and the final quantity demanded is 8,000kg. Therefore, the difference is: 12,000kg - 8,000kg = 4,000kg To calculate the percentage change, we divide the difference by the initial quantity and multiply by 100%: (4,000kg / 12,000kg) x 100% = 33.33% Therefore, the answer is 33%. The percentage change in quantity demanded is a decrease of 33.33%. To further explain, the question is asking for the percentage change in the quantity of maize demanded. From the information given, we know that 12,000kg was demanded at N20 per kg and 8,000kg was demanded at N30 per kg. This means that the demand for maize decreased from 12,000kg to 8,000kg, which is a difference of 4,000kg. To find the percentage change, we divide this difference by the initial quantity demanded (12,000kg) and multiply by 100% to get the percentage change, which is 33.33%. This means that the quantity of maize demanded decreased by 33.33% due to the change in price.

The part which a bait is attached before lowering the tool in water is labelled?

Maelezo ya Majibu

The following bacteria are important in the nitrogen cycle except?

Maelezo ya Majibu

Rhizobium is not directly involved in the nitrogen cycle. The nitrogen cycle is the process by which nitrogen is converted between different forms in the environment, such as from atmospheric nitrogen gas (N2) to ammonium (NH4+) and nitrate (NO3-) ions that plants can use for growth. This cycle involves a variety of microorganisms that play different roles in the process. Bacillus, Nitrobacter, and Nitrosomonas are all involved in the nitrogen cycle. Nitrosomonas converts ammonium to nitrite, and Nitrobacter converts nitrite to nitrate. Bacillus, on the other hand, plays a role in the decomposition of organic matter and the release of ammonium into the soil. Rhizobium is a soil bacteria that forms a symbiotic relationship with legume plants, helping them to convert atmospheric nitrogen into a form that the plant can use. While this process indirectly contributes to the nitrogen cycle, it is not directly involved in the conversion of nitrogen between different forms in the environment.

If 30 eggs make up a crate of eggs, how many eggs are in 2 packs assuming a pack contains 10 crates of eggs?

Maelezo ya Majibu

A pack contains 10 crates of eggs, and each crate contains 30 eggs. To find the total number of eggs in 2 packs, we need to multiply the number of crates in 2 packs by the number of eggs in each crate. So, 2 packs contain 2 x 10 = 20 crates of eggs. Multiplying the number of crates (20) by the number of eggs per crate (30), we get: 20 x 30 = 600 Therefore, there are 600 eggs in 2 packs assuming a pack contains 10 crates of eggs.

The part labelled C in the graph is the?

Maelezo ya Majibu

The part labeled "C" in a graph is the "equilibrium point". This is where the quantity of a good or service that consumers are willing and able to buy (i.e. the quantity demanded) is equal to the quantity that producers are willing and able to sell (i.e. the quantity supplied). In other words, it's the point where there is balance between the amount of a product that is being bought and sold, and there is no surplus or shortage.

The following crops are fiber crops except?

Maelezo ya Majibu

The crop that is not a fiber crop is onion. Fiber crops are plants grown specifically for their fibers, which can be used to make textiles, ropes, paper, and other materials. Cotton, jute, and sisal are all examples of fiber crops. Cotton is one of the most commonly used fiber crops and is widely used to make clothing, towels, and sheets. Jute is a plant that produces strong and durable fibers, which are used to make burlap sacks and rope. Sisal is another plant that produces fibers that are commonly used for rope and twine. On the other hand, onion is a vegetable crop that is primarily grown for its edible bulbs. While onion leaves and stems can be used to make fibers, they are not typically grown or harvested for this purpose. Instead, onion fibers are usually considered a byproduct of onion production, and are not used on a large scale. Therefore, onion is not considered a fiber crop.

The illustrated equipment is called?

Maelezo ya Majibu

The illustrated equipment is called a ranging pole. A ranging pole is a long, straight stick or rod used to measure distances or to determine the position of something. It can be used in surveying, construction, or any other field where precise measurements are needed. The pole is held vertically and its shadow is used to determine the angle of the sun or other reference points, allowing the user to make accurate measurements. The ranging pole is a simple and effective tool that has been used for centuries to help people measure and map the world around them.

The structure of sandy soils can be described as?

Maelezo ya Majibu

When a gene is expressed in the phenotype in a homoxygous or heterogous form, that gene is said to be?

Maelezo ya Majibu

Calculate the area of the farmland.

Maelezo ya Majibu

To calculate the area of the farmland, we need to know the dimensions of the land. However, as we are only given the area of the land in hectares, we cannot determine the length and width of the land directly. Hectares are a unit of area commonly used to measure land. One hectare is equal to 10,000 square meters or approximately 2.47 acres. Therefore, to calculate the area of the farmland in square meters, we can multiply the given area in hectares by 10,000. For example, if the given area is 0.32 hectares, we can calculate the area in square meters as follows: Area in square meters = 0.32 hectares x 10,000 square meters/hectare Area in square meters = 3,200 square meters Similarly, we can calculate the area in square meters for each given option and compare them to determine which one is the largest. The largest area in square meters corresponds to the largest option in hectares.

Which of the following crops can conveniently replace maize in the table?

Maelezo ya Majibu

The crop that can conveniently replace maize in the table is millet. Millet is a small, drought-resistant grain that grows well in hot, arid climates. It is a good source of nutrients such as protein, fiber, vitamins, and minerals. Millet can be cooked in a variety of ways, including boiling, steaming, roasting, or grinding into flour for use in baking. Millet is a great substitute for maize because it is a versatile crop that can be used in many of the same ways as maize. For example, millet can be used to make porridge, bread, cakes, and even beer, just like maize. Millet is also more tolerant to drought and can grow in areas where maize may struggle to thrive. Overall, millet is a nutritious and versatile crop that can be a suitable replacement for maize in many contexts.

Which of the following crops is dicotyledonous?

Maelezo ya Majibu

The crop that is dicotyledonous from the given options is Vigna unguiculata, also known as cowpea. Dicotyledonous plants, also called dicots, are plants that have seeds with two cotyledons or embryonic leaves. These plants generally have broad leaves with veins that are arranged in a branched or net-like pattern. On the other hand, monocotyledonous plants, or monocots, have seeds with a single cotyledon or embryonic leaf. These plants typically have long, narrow leaves with veins that are parallel to each other. Among the given options, Zea mays (corn), Oryza sativa (rice), and Elaeis guineensis (oil palm) are monocotyledonous plants, while Vigna unguiculata (cowpea) is a dicotyledonous plant. Cowpea is an important legume crop that is widely cultivated for its high protein content and ability to fix nitrogen in the soil. It is commonly grown in tropical and subtropical regions of the world and is used for food, feed, and forage purposes.

Mechanical power is not usually required in?

Maelezo ya Majibu

The illustrated equipment is used for?

Maelezo ya Majibu

The deficiency of nitrogen in a maize plant can be corrected by applying?

Maelezo ya Majibu

The correct option to correct nitrogen deficiency in maize plants is sulphate of ammonia. Nitrogen is an essential nutrient for plant growth and plays a key role in the formation of chlorophyll and the production of proteins. When a maize plant lacks nitrogen, its leaves may turn yellow and stunted growth may occur. Sulphate of ammonia is a fertilizer that contains nitrogen in the form of ammonium sulphate. When applied to the soil, the ammonium sulphate breaks down and releases nitrogen, which is taken up by the roots of the maize plant. This helps to correct the nitrogen deficiency and improve the overall health and growth of the plant.

The yield of cocoa trees is not influenced by?

Maelezo ya Majibu

An oven dried soil sample of mass 8g had a mass of 1.6g after it was completely burnt. Determine the percentage of humus in the soil sample.

Maelezo ya Majibu

To determine the percentage of humus in the soil sample, we need to first calculate the mass of the humus that was present in the original soil sample. Humus is the organic matter in soil that remains after the decomposition of plant and animal residues. The mass of the humus in the original soil sample can be calculated by subtracting the mass of the burnt soil from the mass of the oven-dried soil: Mass of humus = Mass of oven-dried soil - Mass of burnt soil Mass of humus = 8 g - 1.6 g Mass of humus = 6.4 g Therefore, the mass of humus in the soil sample is 6.4 g. To calculate the percentage of humus in the soil sample, we need to divide the mass of humus by the mass of the original soil sample and then multiply by 100: Percentage of humus = (Mass of humus / Mass of original soil sample) x 100% Percentage of humus = (6.4 g / 8 g) x 100% Percentage of humus = 80% Therefore, the percentage of humus in the soil sample is 80%. So, option D is the correct answer.

Crops which grow and mature within few weeks of their cultivation are called?

Maelezo ya Majibu

The crops which grow and mature within a few weeks of their cultivation are called ephemeral crops. These crops have a very short life cycle and complete their growth and development quickly. They typically require less time and effort to cultivate and can provide a quick harvest. Examples of ephemeral crops include lettuce, radishes, and spinach, which can be harvested in as little as 4-6 weeks after planting. Ephemeral crops are typically grown in cooler months or in regions with mild climates, as they can be sensitive to extreme heat and moisture. In contrast, annual crops complete their life cycle within a year, biennial crops take two years to mature, and perennial crops can continue to grow and produce for several years.

Which of the following methods of irrigation is most efficient in terms of water conservation?

Maelezo ya Majibu

Of the given options, drip irrigation is the most efficient method of irrigation in terms of water conservation. Drip irrigation involves the slow and steady release of water directly onto the roots of the plants. This method reduces water waste, as the water goes exactly where it is needed and minimizes evaporation. Additionally, because the water is delivered directly to the roots, there is less runoff and less chance of water being lost to erosion. In comparison, flood irrigation involves flooding a field with water, which can lead to water loss through runoff and evaporation. Furrow irrigation and border irrigation are similar to flood irrigation in that they involve the flooding of fields, but they are less efficient than drip irrigation. Therefore, for efficient water conservation, drip irrigation is the best method out of the given options.

Which of the following statements is not a reason for feeding farm animals?

Maelezo ya Majibu

The statement that is not a reason for feeding farm animals is "production of inorganic manure." Feeding farm animals is necessary to provide them with the nutrients they need for energy, growth, and maintenance of body tissues. It is also important to protect them from diseases. However, the production of inorganic manure is a byproduct of the digestion process in animals, and it is not the primary reason for feeding them. Feeding farm animals has various benefits, including increasing their productivity, improving their health, and ensuring the quality of the products they produce, such as meat, milk, and eggs. Inorganic manure, on the other hand, is a secondary benefit that farmers can obtain from their animals, which can be used as fertilizer for crops. Therefore, while the production of inorganic manure is a positive outcome of feeding farm animals, it is not the main reason for doing so.

Which of the labelled parts enables the tool to float on water when fish is caught?

Maelezo ya Majibu

A farmer whose production exceeds point C will experience

Maelezo ya Majibu

A farmer whose production exceeds point C will experience a surplus to the market. In economics, point C represents the equilibrium point where the supply of a product matches the demand for that product. If a farmer's production exceeds this equilibrium point, it means that they are producing more than what is demanded in the market. This surplus will result in a decrease in the price of the product, as the farmer tries to sell the excess supply. This decrease in price could lead to a decrease in revenue generated for the farmer. However, if the farmer can find alternative markets or ways to store the excess supply, they can still make a profit from the surplus. In some cases, a surplus could also lead to a decrease in the cost of production, as the farmer tries to reduce their expenses to maintain profitability. Nonetheless, a surplus to the market is generally considered better than a shortfall in supply, as it means that there is an abundance of the product available for consumers.

Which of the following statements about threshing of rice are true?

I.Rice grains are separated from the panicle
II.Breakage of some grains could occur
III.The grains are polished

Maelezo ya Majibu

Threshing is the process of separating rice grains from the panicle. This is usually done by beating the panicles to loosen the grains. So, the statement "Rice grains are separated from the panicle" is true and corresponds to option (A) and (D). During the threshing process, there is a possibility of breakage of some grains. This is because the grains are subjected to a lot of force, and some of them may be damaged. Therefore, the statement "Breakage of some grains could occur" is also true and corresponds to option (A) and (D). However, the statement "The grains are polished" is not true. Polishing is a separate process that is done after threshing to remove the outer layer of the grain. This is done to give the rice a shiny appearance and improve its texture. Therefore, option (B) and (C) are not correct. In conclusion, the correct options are either (A) or (D), which are I and II Only, or I, II and III.

In a brooder house, which of the following factors is monitored with the use of wet and dry hygrometer?

Maelezo ya Majibu

The factor that is monitored with the use of wet and dry hygrometer in a brooder house is relative humidity. Relative humidity refers to the amount of moisture present in the air, expressed as a percentage of the maximum amount of moisture that the air could hold at a given temperature. In a brooder house, maintaining the correct relative humidity is essential for the health and well-being of the young birds being raised. A wet and dry hygrometer is a simple instrument used to measure relative humidity. It consists of two thermometers, one of which has a wet wick wrapped around its bulb. The wet wick is exposed to the air, and as the water evaporates, it cools the thermometer, causing the temperature to drop. The difference in temperature between the wet and dry thermometers is used to calculate the relative humidity. In a brooder house, the wet and dry hygrometer is used to ensure that the relative humidity is within the appropriate range for the age and type of birds being raised. Too high a humidity can lead to respiratory problems and the growth of harmful bacteria and fungi, while too low a humidity can cause dehydration and other health issues. By monitoring relative humidity with the wet and dry hygrometer, the caretakers of the brooder house can make adjustments to ventilation, heating, and other environmental factors as needed to maintain the optimal conditions for the birds' health and growth.

An important characteristic of pigs is that they are?

Maelezo ya Majibu

The fencing and partitioning of a pastureland into paddocks is meant to?

Maelezo ya Majibu

The fencing and partitioning of a pastureland into paddocks is meant to control grazing and ensure the regeneration of pasture. By dividing the pasture into smaller areas or paddocks, farmers can control the movement of livestock and prevent overgrazing. This allows the pasture to recover and regrow, ensuring a sustainable source of food for the animals. Additionally, paddock grazing can improve soil health and reduce soil erosion, as livestock are concentrated in smaller areas for shorter periods of time. Ultimately, paddock grazing can lead to a healthier and more productive pasture, benefiting both the farmer and the animals.

Which of the following tree species is suitable for making electric poles?

Maelezo ya Majibu

Teak is the tree species that is suitable for making electric poles. Teak wood is known for its strength, durability, and resistance to decay and insects. These qualities make it a popular choice for outdoor structures such as electric poles. The wood is also able to withstand extreme weather conditions, making it a reliable option for supporting power lines. Additionally, teak is relatively easy to work with, making it a popular choice for construction projects. So, if you need to choose a tree species for making electric poles, teak is a great option to consider.

Digestion in ruminants is mainly?

Maelezo ya Majibu

Digestion in ruminants, such as cows and sheep, is mainly microbial and enzymatic. Ruminants have a four-chambered stomach that allows them to digest tough plant materials like cellulose. The first chamber, the rumen, is where microbial fermentation occurs. Bacteria, protozoa, and fungi in the rumen break down the cellulose and other complex carbohydrates in the food into simpler compounds that can be absorbed by the animal. Enzymes produced by the animal and microbes in the rumen also break down proteins and fats into simpler compounds that can be absorbed. The rumen also acts as a storage chamber, allowing the animal to regurgitate and re-chew their food (mastication) before swallowing it again for further digestion. The other three chambers of the ruminant stomach (reticulum, omasum, and abomasum) continue the enzymatic and microbial breakdown of the food before it moves into the small intestine for absorption of nutrients. In summary, digestion in ruminants is mainly microbial and enzymatic. The rumen, with its complex microbial community, plays a crucial role in breaking down complex carbohydrates in the diet, while enzymatic digestion of proteins and fats occurs throughout the digestive tract.

The methods of rangeland improvement which ensure continuous herbage growth during the dry season are?

Maelezo ya Majibu

The major objective of farm planning is to?

Maelezo ya Majibu

Uncontrolled burning of forests encourages?

Maelezo ya Majibu

If the yield of cowpea is 750kg per hectare, calculate the yield of cowpea from a 20 hectare farm.

Maelezo ya Majibu

The yield of cowpea from a farm depends on the area of the farm and the yield per hectare. Given that the yield of cowpea is 750kg per hectare, we can calculate the total yield from a 20-hectare farm by multiplying the yield per hectare by the total area of the farm. Therefore, the yield of cowpea from a 20-hectare farm would be: Yield = Yield per hectare × Area of the farm Yield = 750kg/hectare × 20 hectares Yield = 15,000kg So, the answer is 15,000kg.

Which of the following statements is not a precaution measure in bee keeping?

Maelezo ya Majibu

The statement "the apiary should not be fenced to allow for proper ventilation" is not a correct precaution measure in beekeeping. While proper ventilation is important for the health of bees, fencing an apiary is an important precaution measure to protect both the bees and people who may be near the apiary. Fencing can help prevent people from accidentally disturbing the bees and protect them from potential predators. On the other hand, wearing protective clothing and placing warning signs near an apiary are indeed important precautions for beekeeping. And locating apiaries far from human dwellings can also help reduce the risk of bee-human interactions.

Water which rises above the water table in the soil and is held in fine medium pores between soil particles by surface tension is?

Maelezo ya Majibu

The water which rises above the water table in the soil and is held in fine medium pores between soil particles by surface tension is called "capillary water". Capillary water is able to rise above the water table because of the combined forces of adhesion (attraction between water and soil particles) and cohesion (attraction between water molecules). These forces enable water to move upwards through narrow pores against the force of gravity. In simpler terms, imagine a sponge dipped in water. The water rises up the sponge through capillary action because the tiny spaces between the sponge's fibers are able to hold the water due to surface tension. Similarly, in soil, the capillary action causes water to move upwards against gravity and be held in the spaces between soil particles. This capillary water is important for plant growth as it is the water that is available to plants for uptake through their roots.

Determine the ratio of nutrients in NPK 5-10-15.

Maelezo ya Majibu

NPK 5-10-15 is a type of fertilizer that contains three important nutrients for plant growth: nitrogen (N), phosphorus (P), and potassium (K). The three numbers on the label, separated by hyphens, indicate the percentage of each nutrient present in the fertilizer. In this case, NPK 5-10-15 means that the fertilizer contains 5% nitrogen, 10% phosphorus, and 15% potassium. To determine the ratio of these nutrients, we need to divide each percentage by the lowest percentage to get the simplest whole number ratio. In this case, the lowest percentage is 5%, so we divide each percentage by 5%. 5% nitrogen ÷ 5% = 1 10% phosphorus ÷ 5% = 2 15% potassium ÷ 5% = 3 Therefore, the ratio of nutrients in NPK 5-10-15 is 1:2:3, which means that for every 1 part of nitrogen, there are 2 parts of phosphorus and 3 parts of potassium in the fertilizer. This ratio is important because different plants require different amounts of nutrients, and fertilizers with different ratios can be used to target specific nutrient needs.

Tapeworm, liver fluke and roundworm can be controlled by?

Maelezo ya Majibu

Tapeworms, liver flukes, and roundworms are all types of parasites that can infect both animals and humans. These parasites can cause various health problems and even death in severe cases. Fortunately, there are several methods to control these parasites: 1. Flushing: Flushing involves cleaning out the digestive system of an animal to remove any parasites. This can be done by giving the animal a special diet or medication that will cause them to excrete the parasites from their system. 2. Drenching: Drenching involves giving an animal medication orally to kill any parasites in their system. This medication can come in the form of a pill or liquid. 3. Dipping: Dipping involves immersing an animal in a solution that kills any parasites on their skin. This method is typically used for external parasites, such as ticks or lice. 4. Fumigation: Fumigation involves using chemicals to kill parasites in an enclosed environment, such as a barn or stable. This method is not typically used for controlling parasites in animals. In summary, the most effective methods to control tapeworms, liver flukes, and roundworms in animals are flushing and drenching. Dipping is useful for external parasites, while fumigation is not typically used for controlling parasites in animals. It's important to consult a veterinarian to determine the best method for controlling parasites in your animals.

A cost effective way of disseminating urgent information to a large number of farmers at the same time is through?

Maelezo ya Majibu

A cost-effective way of disseminating urgent information to a large number of farmers at the same time is through mass media. Mass media refers to various channels such as television, radio, newspapers, and social media that can reach a large audience at once. These channels can be used to broadcast urgent information, such as weather alerts, disease outbreaks, market prices, and new farming practices to farmers in different locations. By using mass media, farmers can receive information quickly and simultaneously, without the need for costly travel or physical demonstrations. This makes it an efficient way to disseminate information and promote adoption of new technologies, practices or policies that can improve farming productivity and livelihoods.

A crop that can be propagated by stem cutting is?

Maelezo ya Majibu

If a farmer produces 9 bags of millet at an average cost of D80,000.00 per bag and sells each of the 9 bags at D90,000.00 the profit is?

Maelezo ya Majibu

Igneous rocks can easily be identified through their?

Maelezo ya Majibu

Igneous rocks can be identified by their texture and mineral composition. If the rock has a smooth, glass-like surface, it has a "glassy appearance." If the rock has a rough, uneven surface with large crystals, it has a "coarse texture." If the rock has visible layers, it has a "stratified" appearance. If the rock contains fossils, it is not an igneous rock, as fossils form in sedimentary rocks, not in rocks formed from molten magma.

Which factor of production has the following characteristics?

I.Free gift of nature
II.Limited in supply
III.Immobile

Maelezo ya Majibu

The factor of production that has the characteristics of being a free gift of nature, limited in supply, and immobile is land. "Free gift of nature" refers to the fact that land is a natural resource that is not created by humans. It includes all the gifts of nature such as water bodies, forests, mineral deposits, and soil. "Limited in supply" means that there is a finite amount of land available, and it cannot be produced or manufactured by humans. Therefore, the supply of land is fixed. "Immobile" means that land cannot be moved from one place to another. It is fixed in location, and its location is an essential factor in determining its value. Taken together, these characteristics make land a unique factor of production. Unlike other factors of production, such as labor or capital, land is not produced or manufactured by human effort. It is a fixed and finite resource that is essential for many economic activities, including agriculture, mining, and construction. Therefore, land is a critical resource for economic development, and its scarcity and immobility make it a valuable and limited resource. Thus, land is the factor of production that has the given characteristics.

TEST OF PRACTICAL KNOWLEDGE QUESTION

(a) State two uses each of specimens A (HOE) and B(PICK AXE)

(b) Name four crops that require the use of specimen D (BUDDING KNIFE) during propagation. 

(c) Name three other tools that could serve the same purpose as specimen E (BURDIZZO). 

(d) Mention four ways of maintaining specimen A (HOE)  on the farm.
 

Maelezo ya Majibu

(a) Specimen A (HOE) is commonly used for weeding and cultivating the soil in preparation for planting. It can also be used for digging and shaping garden beds. Specimen B (PICK AXE) is commonly used for breaking up hard soil, digging holes for planting, and chopping through tree roots or rocks.

(b) Specimen D (BUDDING KNIFE) is commonly used for grafting and budding plants. Crops that require the use of a budding knife during propagation include citrus fruits, apples, pears, and grapes.

(c) Other tools that could serve the same purpose as specimen E (BURDIZZO) include castration pliers, emasculators, and bloodless castrators. These tools are used for castrating male livestock, such as cattle and sheep.

(d) Four ways of maintaining specimen A (HOE) on the farm include:

1. Cleaning it after use to remove soil and debris
2. Sharpening the blade regularly to ensure efficient cutting
3. Storing it in a dry place to prevent rust
4. Applying oil to the blade to prevent corrosion.

(a) Discuss the cultivation of Citrus spp under the following headings:

(i) Method of propagation
(ii) Spacing in the field
(iii) Nursery practices
(iv) Pests
(v) Diseases.

(b) Define the following terms:

(i) Surface irrigation
(ii) Surface drainage.

(c) Discuss three advantages of each of the following terms:

(i) Surface irrigation

(ii) Surface drainage.

Maelezo ya Majibu

(a) Cultivation of Citrus spp:

(i) Method of propagation: There are two common methods of propagation for Citrus spp: seed propagation and vegetative propagation. Seed propagation is the most common method, where seed is collected from the fruit and planted. Vegetative propagation involves rooting cuttings or cloning mature trees.

(ii) Spacing in the field: The spacing of Citrus trees in the field depends on the variety and the growing system used. In general, trees should be spaced far enough apart to allow for good air circulation and sunlight penetration, but close enough to allow for efficient use of resources such as water and fertilizer.

(iii) Nursery practices: To produce high-quality Citrus trees, proper nursery practices are important. This includes providing appropriate soil, water, and nutrients, as well as protecting the trees from pests and diseases. Proper pruning and training techniques can also help to produce strong, healthy trees.

(iv) Pests: Citrus trees are susceptible to a variety of pests, including insects and mites. Some common pests include aphids, scale insects, and mites. Proper pest management practices, such as using insecticidal soap or releasing beneficial insects, can help to reduce pest damage.

(v) Diseases: Citrus trees can also be affected by a variety of diseases, including fungal and bacterial diseases. Some common diseases include citrus canker, citrus greening, and citrus black spot. Proper disease management practices, such as using fungicides and proper pruning techniques, can help to reduce disease damage.

(b) Definition of terms:

(i) Surface irrigation: Surface irrigation is a method of irrigation where water is applied to the surface of the soil and allowed to infiltrate into the root zone. This method is often used for crops that have shallow root systems, such as Citrus.

(ii) Surface drainage: Surface drainage is the process of removing excess water from the surface of the soil to prevent waterlogging and maintain a suitable growing environment for plants. This is often achieved by using drainage ditches or channels to remove excess water from the field.

(c) Advantages of Surface Irrigation and Surface Drainage:

(i) Advantages of Surface Irrigation:

1. Efficient water use: Surface irrigation allows for efficient use of water, as water is applied directly to the root zone.
2. Reduced water waste: By applying water directly to the root zone, there is less waste due to runoff or evaporation.
3. Improved plant growth: Surface irrigation can improve plant growth by providing a consistent water supply to the root zone.

(ii) Advantages of Surface Drainage:

1. Improved soil structure: Surface drainage helps to improve the structure of the soil by removing excess water and reducing compaction.
2. Increased root growth: By removing excess water, surface drainage can encourage root growth and improve plant health.
3. Reduced disease risk: Excess water can create a favorable environment for disease-causing organisms, so removing excess water can help to reduce disease risk.

(a) Discuss two possible solutions to each of the following problems of agricultural development in Africa:

(i) Poor transportation

(i) Environmental degradation

(ii) Use of crude farm tools.

(b) State three precautions that should be taken when using each of the following types of farm power:

(i) Animal power

(ii) Electrical power.

(c) Enumerate six reasons for maintaining farm tools and implements.

Maelezo ya Majibu

(a) (i) Poor transportation: 1. Improvement of rural road infrastructure: This can be achieved through the construction of new roads, rehabilitation of existing ones and regular maintenance of rural roads to enhance accessibility of farm products to markets. 2. Use of alternative modes of transportation: This includes the use of bicycles, motorcycles, and small carts to transport goods to market centers, especially in remote areas where vehicular movement is limited. (ii) Environmental degradation: 1. Implementation of sustainable agricultural practices: This involves the use of conservation farming practices such as crop rotation, minimum tillage, and intercropping to maintain soil fertility, reduce soil erosion and prevent soil degradation. 2. Reforestation and afforestation: The planting of trees and establishment of forests can help to mitigate the negative effects of environmental degradation, including soil erosion, deforestation, and desertification. (iii) Use of crude farm tools: 1. Provision of modern farm tools: This involves the provision of modern farm tools such as tractors, planters, harvesters, and irrigation systems to replace the use of crude tools such as hoes, cutlasses, and axes. This can help to increase farm productivity and efficiency. 2. Training of farmers on the use of modern farm tools: Farmers can be trained on the use and maintenance of modern farm tools to ensure their efficient and effective use. (b) (i) Animal power: 1. Proper training of animals: Animals used for farm work should be well-trained to prevent accidents, injuries, and damage to crops. 2. Regular maintenance of animal-drawn equipment: Animal-drawn equipment such as plows and carts should be regularly maintained to ensure their proper functioning and prevent accidents. 3. Proper feeding and care of animals: Animals used for farm work should be well-fed and properly cared for to ensure their health and fitness for work. (ii) Electrical power: 1. Proper handling of electrical equipment: Electrical equipment should be properly handled to prevent accidents and injuries. 2. Regular maintenance of electrical equipment: Electrical equipment should be regularly maintained to ensure its proper functioning and prevent accidents. 3. Use of safety gear: Safety gear such as gloves, boots, and helmets should be used when working with electrical equipment to prevent accidents and injuries. (c) Six reasons for maintaining farm tools and implements are: 1. Increased efficiency: Regular maintenance of farm tools and implements can help to increase their efficiency and effectiveness in farm operations. 2. Improved productivity: Well-maintained farm tools and implements can help to increase farm productivity by reducing the time and effort required for farm operations. 3. Durability: Regular maintenance of farm tools and implements can help to prolong their lifespan, thereby reducing the need for frequent replacement. 4. Reduced cost: Maintenance of farm tools and implements can help to reduce the cost of repairs and replacement of damaged tools. 5. Safety: Properly maintained farm tools and implements can help to prevent accidents and injuries during farm operations. 6. Smooth operation: Regular maintenance of farm tools and implements can help to ensure their smooth operation, thereby reducing the likelihood of breakdowns and downtime during farm operations.

TEST OF PRACTICAL KNOWLEDGE QUESTION

(a)(i) Name the toxic substance found in specimen G (FRESH CASSAVA TUBER).
(ii) Suggest four ways of removing the toxic substance named in (a)(i).

(b) State two uses each of specimens I (ONION BULBS) and J (PEPPER FRUITS).

(c) List four pests of specimen I.

(d) Name two groups of crops to which specimens I and J belong based on their uses.

Maelezo ya Majibu

(a)

1. The toxic substance found in specimen G (fresh cassava tuber) is called cyanide.
2. Four ways of removing the toxic substance from cassava tubers are peeling, soaking, boiling, and fermenting.

(b)

1. Two uses of specimens I (onion bulbs) are as a spice and for medicinal purposes, while two uses of specimens J (pepper fruits) are as a spice and for culinary purposes.

(c)

1. Four pests of specimen I (onion bulbs) are onion thrips, onion maggots, cutworms, and nematodes.

(d)

Specimens I (onion bulbs) and J (pepper fruits) belong to the group of vegetable crops, which are grown for human consumption. Within the vegetable group, onions are a bulb vegetable, while peppers are a fruit vegetable.

(a) Describe the life cycle of the variegated grasshopper.

(b) List five ways through which diseases are spread on crop farms.

(c) List six characteristics of a good layer.

Maelezo ya Majibu

(a) The life cycle of the variegated grasshopper includes three stages: egg, nymph, and adult. The female grasshopper lays her eggs in the soil during the fall. The eggs remain dormant during the winter and hatch in the spring, giving rise to nymphs. The nymphs molt several times and grow in size, developing wings and reproductive organs. After reaching the adult stage, the grasshopper mates, and the female lays her eggs, completing the life cycle.

(b) Diseases can be spread on crop farms through various ways, including:

1. Soil-borne pathogens: Pathogens such as fungi, bacteria, and viruses can survive in soil for long periods, infecting crops planted in the same soil.
2. Water-borne pathogens: Pathogens can be spread through irrigation water or rain splashes, infecting crops.
3. Insects and pests: Insects and pests can act as vectors, transmitting diseases from infected plants to healthy ones.
4. Contaminated tools and equipment: Tools and equipment used for planting, harvesting, and other farm activities can spread diseases if not properly cleaned and disinfected.
5. Human activities: Human activities such as handling infected plants, soil, or water, can spread diseases to healthy plants.

(c) A good layer is a chicken breed that is capable of laying eggs consistently and regularly. Some characteristics of a good layer include:

1. High egg production: Good layers are capable of laying a large number of eggs consistently throughout the year.
2. Good feed conversion: Good layers are efficient at converting feed into eggs, which makes them cost-effective.
3. Docile temperament: Good layers should be calm and easy to handle, making them easier to care for and reducing stress on the birds.
4. Good health and disease resistance: Good layers should be healthy and resistant to diseases, reducing the need for medication and veterinary care.
5. Good egg quality: Good layers should lay eggs that are of good size, color, and texture, and have a strong shell.
6. Long laying cycle: Good layers should have a long laying cycle, which means they can lay eggs for several years before their egg production declines.

TEST OF PRACTICAL KNOWLEDGE QUESTION

(a) Give three reasons for stocking K (TILAPIA) and L (CATFISH) together in a pond.

(b) List four fishing gears used for harvesting specimens K and L in a pond.

(c) Name four products that could be made from specimen M(MILK).

(d) State four reasons for adding specimen N (LIME)  to the pond in which specimens K and L are stocked.

Maelezo ya Majibu

(a) Three reasons for stocking Tilapia (K) and Catfish (L) together in a pond are:

1. Mutualism: Tilapia and Catfish have a symbiotic relationship where Tilapia feed on algae and other aquatic plants, helping to maintain water quality, while Catfish feed on Tilapia waste, helping to reduce the buildup of excess nutrients in the pond.
2. Better utilization of resources: Stocking both Tilapia and Catfish in the same pond allows for the efficient use of space, food, and other resources.
3. Increased production: Stocking both species in the same pond can lead to increased production and a more diverse product offering, as both Tilapia and Catfish have different market demands and growth rates.

(b) Four fishing gears used for harvesting Tilapia and Catfish in a pond are:

1. Cast nets: Used to capture large numbers of fish at once.
2. Seine nets: Used to enclose a section of the pond and harvest the fish within.
3. Traps: Used to capture fish in specific areas of the pond.
4. Hooks and lines: Used to target individual fish or smaller groups.

(c) Four products that could be made from Milk (M) are:

1. Cheese: A dairy product made from milk curdled with bacteria or an acid.
2. Butter: A dairy product made by churning cream until it becomes solid.
3. Yogurt: A dairy product made by fermenting milk with bacteria.
4. Ice cream: A frozen dessert made with milk, sugar, and flavorings.

(d) Four reasons for adding Lime (N) to the pond in which Tilapia and Catfish are stocked are:

1. pH adjustment: Lime can help to adjust the pH of the water, making it more alkaline and creating a better environment for Tilapia and Catfish.
2. Algae control: Lime can help to control the growth of algae and other aquatic plants, reducing competition for food and oxygen.
3. Increased water hardness: Lime can increase the hardness of the water, which can benefit Tilapia and Catfish by providing a more stable environment for growth.
4. Disease prevention: Lime can help to prevent the spread of some diseases by creating a less hospitable environment for disease-causing organisms.