JAMB UTME - Geography - 2021

Which of the following processes leads to the loss of carbon from the air

Detalhes da Resposta

Use the map below to answer this question above

The feature marked Y on the map is?

Detalhes da Resposta

The tourist centre of Ogbunike care is located near

Detalhes da Resposta

The correct answer is "Onitsha in Anambra state." Ogbunike Cave is a popular tourist destination in Nigeria, known for its beautiful natural caves and rock formations. It is located in Ogbunike, a small town in Anambra state, in the southeastern part of the country. Onitsha, which is one of the largest cities in Anambra state, is located just a few kilometers from Ogbunike and is the closest major city to the Ogbunike Cave tourist center. The town of Ogbunike can be accessed via the Onitsha-Owerri expressway, and the cave is only a short distance from the town center. Therefore, the correct answer is "Onitsha in Anambra state" since it is the nearest major city to the tourist center of Ogbunike Cave.

Nigeria's major export commodity is

Detalhes da Resposta

Nigeria's major export commodity is petroleum, also known as crude oil. Petroleum is a fossil fuel that is formed from the remains of plants and animals that died millions of years ago. It is a valuable resource that is used in a wide range of applications, including transportation, power generation, and manufacturing. In Nigeria, petroleum was discovered in the 1950s, and it has since become the country's major export commodity, accounting for a significant portion of the country's revenue. Nigeria is one of the largest oil producers in Africa and one of the top oil exporters in the world. The oil industry has had a significant impact on Nigeria's economy, providing employment opportunities and contributing to the country's economic growth. However, there have also been concerns about the environmental impact of oil exploration and the management of the revenue generated from the industry. In summary, Nigeria's major export commodity is petroleum, which is a valuable resource used in various industries. The discovery and production of oil have had a significant impact on Nigeria's economy, but there are also challenges and concerns associated with the industry.

Kossou Dam is located on River

Detalhes da Resposta

Kossou Dam is located on the Bandama River. The Bandama River is a major river in Ivory Coast, located in West Africa. The Kossou Dam is one of the largest dams on this river, and it is an important source of hydroelectric power for the country. The dam was built in the 1960s and is located about 60 kilometers north of the city of Yamoussoukro. The Bandama River is approximately 800 kilometers long and is the longest river entirely within Ivory Coast. It is an important source of water for irrigation and other agricultural activities, and it is also an important transportation route for goods and people. The Kossou Dam was built to harness the power of the Bandama River and generate electricity for the country. The dam has a capacity of 174 megawatts and is able to supply power to much of the country. In addition to generating electricity, the dam also helps to control flooding in the area and provides water for irrigation and other purposes. In summary, the Kossou Dam is located on the Bandama River in Ivory Coast. The Bandama River is an important source of water for irrigation and transportation, and the dam is an important source of hydroelectric power for the country.

These are landforms producing agent except

Detalhes da Resposta

Out of the given options, storms are not a landform producing agent. Landforms are natural features on the Earth's surface, such as mountains, valleys, and plains, that are created over long periods of time through the actions of various agents. These agents include natural forces such as water, wind, ice, and gravity. Waves, rivers, and glaciers are all agents that can shape the Earth's surface over time. Waves can erode coastlines and create features like sea cliffs and sea caves. Rivers can carve out valleys and canyons through erosion and transport sediment downstream. Glaciers can also erode and transport sediment, as well as create features such as moraines and U-shaped valleys. On the other hand, storms are not an agent that shapes the Earth's surface in a significant way. Storms are short-lived weather events that can cause erosion and deposition in some areas, but they are not powerful enough to create significant landforms on their own. However, storms can interact with other landforming agents like rivers and waves, exacerbating their effects and creating more dramatic changes to the landscape.

Which of the following is not a factor that favours industrial concentration in Western Nigeria?

Detalhes da Resposta

Creativity of people in the area is not a factor that favours industrial concentration in Western Nigeria. Industrial concentration refers to the clustering of industries in a particular geographic location. There are several factors that can influence the concentration of industries in an area. In the case of Western Nigeria, three key factors that favour industrial concentration are the availability of raw materials, closeness to major importing and exporting ports, and a good road network. The availability of raw materials is a major factor that influences the location of industries. Industries require access to raw materials to produce goods and services, and if these raw materials are readily available in a particular area, it makes sense for industries to cluster there. Closeness to major importing and exporting ports is also an important factor that can influence industrial concentration. If industries are located close to major ports, they have easier access to the global market and can more easily import raw materials and export finished products. A good road network is also important for industrial concentration. If an area has good roads, it is easier for goods and services to be transported in and out of the area. This can help to reduce transportation costs and increase efficiency, which can be especially important for industries that rely on just-in-time manufacturing and delivery. Creativity of people in the area, while important in terms of innovation and entrepreneurship, is not a direct factor that influences industrial concentration. Other factors such as access to capital, labour force availability, and government policies may play a more important role in promoting industrial concentration. In summary, the availability of raw materials, closeness to major ports, and a good road network are important factors that favour industrial concentration in Western Nigeria. Creativity of people in the area, while important for innovation and entrepreneurship, is not a direct factor that influences industrial concentration.

The human activity that can improve composition of the atmosphere is

Detalhes da Resposta

On maps, lines drawn to join all places in the ocean having equal degree of salinity are called

Detalhes da Resposta

On maps, lines drawn to join all places in the ocean having equal degree of salinity are called isohalines. Isohalines are similar to contour lines on topographic maps that join all points of equal elevation. However, instead of elevation, isohalines connect all points on a map that have the same salinity in the ocean. Ocean salinity is a measure of the amount of salt dissolved in a given amount of seawater. The salinity of ocean water varies depending on several factors, such as temperature, evaporation, and precipitation. By drawing isohalines on maps, scientists can visualize the patterns of salinity distribution in the ocean and study how it changes over time. The term "isohaline" comes from the Greek word "iso" meaning equal and "haline" meaning salt, so it literally means "equal salt."

Which of the following is associated with savanna vegetation

Detalhes da Resposta

The coastal regions of Sierra leonne record an annual rainfall of over

Detalhes da Resposta

The coastal regions of Sierra Leone record an annual rainfall of over 4,000 mm. Sierra Leone is a country located in West Africa, and its climate is generally tropical, with high temperatures and high humidity. The amount of rainfall that a place receives is determined by a number of factors, including its location and topography. The coastal regions of Sierra Leone are characterized by a dense forest and a humid climate, which is influenced by the Atlantic Ocean. The prevailing winds from the ocean bring moisture and result in high levels of rainfall. This region receives an annual rainfall of over 4,000 mm, which is one of the highest levels of rainfall in the world. The high rainfall is beneficial for agriculture, as it provides the necessary moisture for crops to grow. However, it can also result in flooding and landslides, which can be hazardous for the people living in the region. In summary, the coastal regions of Sierra Leone receive an annual rainfall of over 4,000 mm, which is a result of the region's location and its proximity to the Atlantic Ocean.

Which of the following gives the correct full meaning of G.I.S?

Detalhes da Resposta

The correct full meaning of GIS is Geographic Information System. GIS is a system designed to capture, store, manipulate, analyze, manage and present spatial or geographical data. It combines hardware, software, and data to create digital maps that can be used to analyze and visualize information related to geographic locations. GIS technology is used in a wide range of applications such as urban planning, natural resource management, emergency response, and many others. In summary, GIS stands for Geographic Information System and it is a system used to capture, store, analyze, and present spatial data related to geographic locations.

Which of the following countries is located in North Africa.

Detalhes da Resposta

Algeria is located in North Africa. North Africa is a region of the African continent that includes several countries such as Algeria, Egypt, Libya, Morocco, Sudan, Tunisia, and Western Sahara. It is bordered by the Mediterranean Sea to the north, the Atlantic Ocean to the west, and the Sahara Desert to the south. Zaire, also known as the Democratic Republic of the Congo, is located in Central Africa. Rwanda is located in East Africa. Namibia is located in Southern Africa. Therefore, the correct answer is Algeria.

Which of the following is not a sea route?

Detalhes da Resposta

The option "London - Moscow - Baghdad" is not a sea route. This is a land route as it does not involve any sea transportation. The other three options are sea routes as they involve transportation by sea between the cities mentioned.

__________ is a highland area which seperates the headstreams of rivers flowing in different directions but rising from the same mountainous source

Detalhes da Resposta

The term that fits the given definition is "watershed." A watershed is a highland area that separates the headwaters of rivers that flow in different directions but originate from the same mountainous source. Think of it as a dividing line that determines which direction rainwater will flow. Rain that falls on one side of the watershed will flow into one river, while rain that falls on the other side will flow into a different river. This separation is important because it affects the water quality and quantity of each river, and it can have significant impacts on the ecosystems that depend on those rivers.

The function performed by urban to the rural settlement in supply of

Detalhes da Resposta

Urban settlements often supply manufactured goods to rural settlements. Manufactured goods are products that are made using raw materials and processes that transform these materials into finished products. Urban areas often have a higher concentration of factories and industries that produce these manufactured goods, which are then supplied to rural areas. This allows rural residents to access products that they may not be able to produce themselves, such as electronics, household appliances, and other consumer goods. By supplying these goods, urban settlements play an important role in supporting the economic development of rural areas.

A settlement located where two rivers meet is called a

Detalhes da Resposta

A settlement located where two rivers meet is called a confluence town. A confluence is a point where two or more rivers meet and flow together as one. Settlements located at confluences are called confluence towns because they are situated at a unique and strategic location where two rivers meet. Confluence towns have historically been important for transportation, trade, and agriculture, as well as for strategic and military reasons. They are often located at the intersection of major river systems, making them important hubs for transportation and commerce. The availability of water from two rivers can also make confluence towns ideal locations for farming and irrigation. Therefore, a settlement located where two rivers meet is called a confluence town.

Exports from Mali are most likely to pass through the Sea port at

Detalhes da Resposta

Jos plateau is an example of a

Detalhes da Resposta

One of the disadvantages of water transport is that it

Detalhes da Resposta

Which of the following statements is true of the North Atlantic Sea route?

Detalhes da Resposta

Which of the following farming activity best describes the rearing of only animals like cattle, sheep and goat mainly in the savanna belt of the north?

Detalhes da Resposta

Pastoral farming best describes the rearing of only animals like cattle, sheep, and goat mainly in the savanna belt of the north. Pastoral farming is a type of agricultural activity that involves the rearing of domesticated animals, such as cattle, sheep, and goats, in an extensive system, where the animals are allowed to roam freely over large areas of land. Pastoral farming is often practiced in regions with large areas of grassland, such as the savanna belt in the north of Nigeria, where the animals are able to find enough food and water to sustain themselves. Intensive farming, on the other hand, is a type of agricultural activity that involves the intensive use of inputs, such as land, labor, and capital, to maximize production. Intensive farming is often practiced in regions with high population densities and limited land resources. Animal farming is a general term that can refer to any type of farming that involves the rearing of animals, including both pastoral and intensive farming. Mixed farming is a type of agricultural activity that involves the simultaneous production of crops and livestock, often on the same piece of land.

_______ is defined as the total surrounding or medium of any organism in a given area

Detalhes da Resposta

The term that is defined as the total surrounding or medium of any organism in a given area is "environment". Environment refers to the sum total of all biotic and abiotic factors that affect an organism in a given area. Biotic components refer to all living organisms in an ecosystem, including plants, animals, fungi, and bacteria. Abiotic components, on the other hand, refer to all non-living factors, such as water, air, sunlight, temperature, soil, and minerals, that affect living organisms. An ecosystem is a community of living organisms, along with their non-living environment, that interact with each other. Therefore, an ecosystem is made up of both biotic and abiotic components, and it is a specific unit of the environment that can be studied as a distinct entity.

Sparse population in the middle belt of Nigeria can not be attributed to

Detalhes da Resposta

In Nigeria, which of the following vegetation zones is best known for timber exploitation?

Detalhes da Resposta

The vegetation zone in Nigeria that is best known for timber exploitation is the rain forest. The rain forest is a vegetation zone characterized by a dense growth of tall trees and high rainfall, which is conducive to the growth of large trees suitable for timber production. This type of vegetation is found in the southern part of Nigeria, particularly in states such as Cross River, Akwa Ibom, Rivers, and Delta. In these areas, there are many timber companies that engage in the logging and processing of timber from the rain forest. The timber industry is an important sector of the Nigerian economy, as timber is used for a variety of purposes such as construction, furniture making, and paper production. However, it is important to note that unsustainable logging practices can lead to deforestation and habitat loss, which can have negative impacts on biodiversity and the ecosystem. Therefore, it is important to ensure that logging activities are carried out in a sustainable manner, with measures taken to preserve the forest and its biodiversity for future generations.

Which of the following rocks is organically formed?

Detalhes da Resposta

Coal is the rock that is organically formed. Coal is formed from the remains of ancient plants and trees that died millions of years ago. Over time, these organic materials were buried under layers of sediment and rock, which subjected them to intense pressure and high temperatures. This process caused the organic matter to transform into coal, a black or brown rock that is primarily composed of carbon. In contrast, Gypsum, Grit, and Shale are all rocks that are formed through inorganic processes. Gypsum is formed from the evaporation of saline water, grit is a sandstone that is formed from the accumulation of sand particles, and shale is formed from the accumulation of mud and silt. In summary, coal is the only rock that is formed through organic processes, while gypsum, grit, and shale are formed through inorganic processes.

A device for transferring information from analogue map into computer for further manipulation is

Detalhes da Resposta

A device for transferring information from an analogue map into a computer for further manipulation is called a Digitizer. A digitizer is a piece of hardware that is used to convert analogue information into a digital format that can be read and manipulated by a computer. In the case of maps, a digitizer is used to trace the features on a paper map and convert them into a digital format, such as a shapefile or a georeferenced image. This allows the information on the map to be easily manipulated, stored, and analyzed using computer software. An aerial photograph is a type of image that is taken from the air, often from an airplane or drone, and is used to capture information about the land and features on the ground. A global positioning system (GPS) is a network of satellites and receivers that is used to determine the location, speed, and direction of an object on the Earth's surface. A plotter is a type of printer that is used to produce large-format images, such as maps, technical drawings, and architectural plans.

Which of the following tourist centres is wrongly paired?

Detalhes da Resposta

The tourist center that is wrongly paired in the given options is "Eiffel Tower - Germany." The correct country for the Eiffel Tower is France, not Germany. The Eiffel Tower is a wrought-iron lattice tower located on the Champ de Mars in Paris, France. It is one of the most recognizable structures in the world and is a symbol of Paris and France. It was constructed between 1887 and 1889 as the entrance to the 1889 World's Fair, and it has become a global cultural icon of France and one of the most visited tourist attractions in the world. Therefore, the correct pairing for the Eiffel Tower is France, not Germany.

Nigeria is located between longitudes

Detalhes da Resposta

Nigeria is located between longitudes 3°E and 15°E. Longitude is a measure of distance east or west of the Prime Meridian, which is an imaginary line that runs from the North Pole to the South Pole and passes through the Royal Observatory in Greenwich, London. The Prime Meridian has a longitude of 0°, and all other longitudes are measured in degrees east or west of the Prime Meridian. Nigeria is located in West Africa, and its easternmost point is about 3°E, while its westernmost point is about 15°E. Therefore, Nigeria is located between longitudes 3°E and 15°E.

The correct arrangement of the layers of the earth crust from the surface to the interior is

Detalhes da Resposta

The correct arrangement of the layers of the earth's crust from the surface to the interior is "sial, sima, mantle, and core." The outermost layer of the earth is called the crust, which is divided into two types: the continental crust and the oceanic crust. The continental crust is made up of a type of rock called "sial," which stands for "silicon" and "aluminum." This layer is relatively thicker and less dense than the oceanic crust. The oceanic crust, on the other hand, is made up of a type of rock called "sima," which stands for "silicon" and "magnesium." This layer is relatively thinner and denser than the continental crust. Beneath the crust is the mantle, which is made up of solid, dense rock. The mantle is the thickest layer of the earth and is responsible for convection currents that drive plate tectonics. The temperature and pressure in the mantle increase with depth. Finally, the core of the earth is located at the center of the planet and is made up of two parts: the outer core and the inner core. The outer core is made up of liquid iron and nickel, while the inner core is made up of solid iron and nickel. The core is the hottest and densest part of the planet, and it is responsible for generating the earth's magnetic field. In summary, the correct arrangement of the layers of the earth's crust from the surface to the interior is sial, sima, mantle, and core.

Geo-referencing in GIS is referred to as

Detalhes da Resposta

Geo-referencing in GIS is the process of assigning spatial locations (coordinates) to a dataset, such as an image, map, or survey data, so that it can be viewed, analyzed, and compared with other spatial datasets. The main objective of geo-referencing is to integrate datasets from different sources that have different coordinate systems, projections, and scales into a common reference framework. This enables users to overlay, compare, and analyze different spatial datasets accurately and effectively. Geo-referencing involves aligning the data to a known reference system, such as a map or satellite imagery, and assigning a spatial location to each data point. This process involves identifying control points, which are specific locations that appear in both the data and the reference system, and using them to determine the transformation that is needed to align the data with the reference system. Once the data has been geo-referenced, it can be used for data acquisition, data management, manipulation, and analysis in GIS. Geo-referenced datasets can be used for a wide range of applications, including natural resource management, urban planning, environmental monitoring, and disaster management.

Which of the following towns is not a precolonial town

Detalhes da Resposta

Enugu is not a precolonial town. Precolonial refers to the time period before the colonization of a particular area or region by European powers. In Nigeria, many towns and cities existed before the arrival of the Europeans, and these are referred to as precolonial towns. Ilorin, Bida, and Ibadan are all precolonial towns in Nigeria. They existed as independent kingdoms and city-states with their own unique cultures, traditions, and forms of governance long before the arrival of the Europeans. Enugu, on the other hand, was not a precolonial town. The town was founded in the early 20th century by the British colonial authorities as a coal mining settlement. While there were some settlements and villages in the area before the arrival of the British, Enugu did not exist as a town or city with a defined political and social structure until it was established by the colonial authorities.

The following are the importance of highland in Nigeria except

Detalhes da Resposta

The importance of highlands in Nigeria does not include being a source of minerals. Highlands are elevated areas of land that are generally located at higher altitudes than the surrounding areas. In Nigeria, there are several highland areas, including the Jos Plateau and the Mambilla Plateau. These highlands have several important features and benefits. One of the key benefits of highlands is that they occupy good land that is suitable for agriculture. The higher altitudes often mean cooler temperatures, which can be beneficial for certain crops. Additionally, the soil in highland areas may be richer and more fertile, which can result in higher crop yields. Highlands can also serve as settlement sites, as they are often more defensible than lowland areas. Historically, many highland areas in Nigeria have been used as sites for forts and other defensive structures. Another important feature of highlands is that they are often the source of rivers. The high elevations allow for the accumulation of water, which can then flow downhill and form rivers and other bodies of water. These rivers can be important sources of water for irrigation, as well as for domestic and industrial use. While highlands may contain minerals, they are not typically a major source of mineral resources in Nigeria. Mineral resources in Nigeria are more commonly found in other areas, such as the Niger Delta and the Jos Plateau. In summary, highlands in Nigeria are important for their suitability for agriculture, their historical use as settlement sites, and their role as sources of rivers. While they may contain minerals, this is not typically their primary importance.

Use the map below to answer this question above
 

What is the feature labelled K on the map is

Detalhes da Resposta

Where the salinity of an ocean is high;

Detalhes da Resposta

When the salinity of an ocean is high, the ocean water becomes more dense. This dense water tends to sink towards the bottom of the ocean and flow along the ocean floor towards areas where the salinity is lower. So, the correct answer is: the ocean water is dense and creeps at the bottom of the ocean towards low salinity areas.

The outer structure of the earth is made up of the following except?

Detalhes da Resposta

The type of water left in the soil after excess water has been drained off, following heavy rainfall is known as

Detalhes da Resposta

The type of water left in the soil after excess water has been drained off following heavy rainfall is known as field capacity. Field capacity refers to the amount of water that the soil can hold after excess water has drained away and the soil particles have become saturated. This water is held in the soil by a combination of gravity and the attraction between water molecules and soil particles. In other words, field capacity is the point at which the soil is neither too wet nor too dry, and it is the maximum amount of water that can be stored in the soil and still be available for plants to use.

Which of the following lakes owes its origin mainly to faulting?

Detalhes da Resposta

One of the following surveying instruments is used to set out lines at right angles to the main chain line

Detalhes da Resposta

The surveying instrument used to set out lines at right angles to the main chain line is an optical square. An optical square is a simple, yet precise surveying instrument that consists of two mirrors that are set at exactly 90 degrees to each other. It is used to establish perpendicular lines or right angles to the main chain line during the surveying process. The instrument is set up by placing it on the ground with one mirror facing down the main chain line and the other mirror facing at right angles to the main chain line. To use the optical square, a surveyor would first set up the main chain line using a steel band or another measuring instrument. Once the main chain line has been established, the optical square is set up and aligned with the main chain line. The mirror facing down the main chain line reflects the view of the surveyor along the line, while the other mirror reflects the view at right angles to the main chain line. This allows the surveyor to set out lines at right angles to the main chain line with a high degree of accuracy. In summary, the optical square is a surveying instrument used to set out lines at right angles to the main chain line by reflecting views along the main chain line and at right angles to it.

The system of agriculture referred to as "Land rotation" is

Detalhes da Resposta