WAEC SSCE - Geography - 2003
Ajụjụ 2 Ripọtì
Pastoral nomadism is practiced in the savanna areas of West Africa by the
Akọwa Nkọwa
Pastoral nomadism is a type of subsistence agriculture that involves raising livestock, such as cattle, sheep, and goats, by constantly moving from one place to another in search of food and water for their animals. This practice is common in arid and semi-arid regions of the world, where there is limited rainfall and vegetation. In West Africa's savanna areas, pastoral nomadism is predominantly practiced by the Fulani people, who are known for their long-distance cattle herding and transhumance practices, where they move their animals seasonally in search of greener pastures.
Ajụjụ 3 Ripọtì
Inselberg may best be described as
Akọwa Nkọwa
An inselberg is a residual hill with steep sides and usually exposed by denudation. It is a geological landform that stands out conspicuously above the surrounding plain due to its resistance to erosion. Inselbergs are typically composed of hard rocks such as granite, and they are often found in arid or semi-arid regions where weathering is minimal. Therefore, the correct option is: "a residual hill with steep sides and usually exposed by denudation."
Ajụjụ 4 Ripọtì
An aquifer can best be described as
Akọwa Nkọwa
An aquifer is a water-bearing rock layer that can store and transmit groundwater. It is usually found between two layers of impermeable rock that prevent the water from seeping out. The permeable rock can be sandstone, limestone, or other types of rock that allow water to flow through their pores and spaces. Aquifers are important sources of water for wells and springs, and they can be replenished by precipitation and surface water that percolates down into the ground.
Ajụjụ 5 Ripọtì
Fold mountains are basically formed as a result of
Akọwa Nkọwa
Fold mountains are formed as a result of compressional forces. When two tectonic plates collide, the rock layers between them are pushed together and forced upward, causing the crust to fold and buckle. This process is known as orogeny and it results in the formation of fold mountains, such as the Himalayas, the Alps, and the Andes. The compressional forces can also cause the rocks to fracture and fault, leading to the formation of thrust faults and overthrusts. Over millions of years, erosion can wear down the mountains, but the forces that created them can still be seen in their folded and faulted rock layers.
Ajụjụ 6 Ripọtì
Which of the following is not a metamorphic rock?
Ajụjụ 7 Ripọtì
Which of the following types of rock is a source of energy?
Akọwa Nkọwa
Coal is the type of rock that is a source of energy. Coal is a sedimentary rock that is formed from the accumulation of plant material over millions of years. When coal is burned, it releases energy in the form of heat and is used as a fuel for various purposes such as electricity generation, heating, and cooking. Coal is one of the most widely used sources of energy in the world and plays an important role in many economies.
Ajụjụ 8 Ripọtì
Loamy soils are better for agriculture than other soil types because they
Akọwa Nkọwa
Loamy soils are better for agriculture than other soil types because they retain air, moisture, and humus, which is important for plant growth. The soil texture of loamy soils is such that it allows for a balance of water retention and drainage, making it ideal for plants to absorb water and nutrients while preventing waterlogging. Additionally, loamy soils are rich in mineral nutrients and organic matter, such as humus, which supports the growth of crops. The organic matter in loamy soils provides a source of nutrients for plants and improves the structure of the soil, making it easier for roots to penetrate and access water and nutrients. Therefore, loamy soils are considered the most fertile and productive soil type for agriculture.
Ajụjụ 9 Ripọtì
The combination of sial and sima constitute the
Akọwa Nkọwa
The combination of sial and sima constitute the lithosphere. Sial is the upper layer of the Earth's crust, which is composed of lighter rocks such as granite, while sima is the lower layer composed of heavier rocks such as basalt. The lithosphere is the solid, outermost layer of the Earth, which includes both the crust and the uppermost part of the mantle. It is the rigid layer upon which the Earth's tectonic plates move and interact with each other, causing earthquakes, volcanic eruptions, and the formation of mountains.
Ajụjụ 10 Ripọtì
The mode of transport that is best suited for the distribution of petroleum products is
Akọwa Nkọwa
The mode of transport that is best suited for the distribution of petroleum products is pipeline. Pipelines are specifically designed for the transportation of liquids and gases over long distances, making it an efficient means of transporting petroleum products. It is cost-effective, safe, and minimizes the risk of accidents and environmental pollution. Additionally, pipelines require minimal maintenance, have a high capacity for transport, and reduce the cost of transportation compared to other modes of transport like road, water, or rail. Therefore, pipelines are the most preferred mode of transport for the distribution of petroleum products.
Ajụjụ 12 Ripọtì
Flooding can be prevented by
Akọwa Nkọwa
Flooding can be prevented by planning towns and cities in such a way that they take into account the possibility of flooding. This can involve building structures on higher ground, creating designated flood plains, and ensuring that drainage systems are properly designed and maintained. Dumping refuse in drainage channels can actually exacerbate flooding by clogging up the system, while building houses and roads in flood plains can put people and property at risk. Building strong fences around buildings does not directly prevent flooding, although it may provide some protection from the effects of flooding such as debris carried by the flood waters.
Ajụjụ 14 Ripọtì
Which of the following is a feature of heavy manufacturing industries?
Akọwa Nkọwa
Heavy manufacturing industries are characterized by their dependence on electricity-powered equipment. These industries typically produce goods such as machinery, vehicles, and heavy equipment in large quantities. Due to the size and complexity of the machinery required, heavy manufacturing industries typically require a large amount of space for their workshops and factories. Additionally, heavy manufacturing industries often employ a significant number of workers, many of whom are specialized and highly skilled in their trade. Overall, heavy manufacturing industries tend to be capital-intensive and require significant investment in machinery and equipment.
Ajụjụ 15 Ripọtì
In which of the following ways is soil important to man? I. serves as a medium for plant seeds to germinate II. provides support for growing plants III. brings water to the roots IV. supplies minerals to the plants
Akọwa Nkọwa
Soil is important to man in many ways. It serves as a medium for plant seeds to germinate, provides support for growing plants, brings water to the roots, and supplies minerals to the plants. Therefore, the correct answer is option D: I, II, III, and IV.
Ajụjụ 16 Ripọtì
Which of the following transport systems is most affected bu climatic factors?
Akọwa Nkọwa
Ajụjụ 18 Ripọtì
Which of the following factors least affects the location of manufacturing industries?
Akọwa Nkọwa
Ajụjụ 19 Ripọtì
The process of weathering in limestone region is mainly
Akọwa Nkọwa
The process of weathering in limestone region is mainly solution. Limestone is a sedimentary rock made up of calcium carbonate, which is easily dissolved in water that is slightly acidic. Over time, rainwater containing carbon dioxide dissolves the calcium carbonate, creating cracks and holes in the limestone. This process is known as solution and is the main process of weathering in limestone regions. As the limestone dissolves, it forms features such as sinkholes, caves, and underground drainage systems.
Ajụjụ 20 Ripọtì
Chalk is a good example of
Akọwa Nkọwa
Chalk is a good example of an organically formed sedimentary rock. It is made up of the microscopic skeletons of marine plankton that lived millions of years ago. These skeletons settled on the ocean floor and over time, were compacted and cemented together to form the soft, white rock that we know as chalk. The process of formation of chalk is an example of biological sedimentation. Chalk is often found in areas that were once covered by shallow seas, such as the White Cliffs of Dover in England.
Ajụjụ 21 Ripọtì
Which of the following is a warm ocean current?
Akọwa Nkọwa
The warm ocean current is the Mozambique current. It flows southwards along the southeastern coast of Africa, originating from the equatorial counter-current in the Indian Ocean. This current brings warm water from the tropics towards the poles, influencing the climate and weather patterns of the areas it passes through. The other options listed are all cold ocean currents, which flow from polar regions towards the equator, carrying cold water with them.
Ajụjụ 22 Ripọtì
Abrasion,attrition and deflation are processes of
Akọwa Nkọwa
Abrasion, attrition, and deflation are processes of wind erosion. Abrasion is the process by which wind carries small rock particles that strike and scrape against rocks, breaking them apart. Attrition is the process by which these small rock particles collide with each other, breaking into even smaller particles. Deflation is the process by which wind removes and carries away loose particles, such as sand or dust, leaving behind a surface that is more compact and solid. Together, these processes can erode and shape landscapes in arid regions with little vegetation cover, such as deserts.
Ajụjụ 23 Ripọtì
Which of the following is not true of Cool Temperature Western Margin Climate?
Akọwa Nkọwa
The statement that is not true of Cool Temperature Western Margin Climate is "summer rainfall and water drought". This is because this type of climate has a high and relatively evenly distributed rainfall throughout the year, with no distinct dry season. The other options are true. The mean annual temperature is between 5°C and 16°C, with an annual temperature range of 13°C. The summers are moderately warm and the winters are fairly mild.
Ajụjụ 24 Ripọtì
As a volley ball match was being played in town Y, the referee observed that the local time was noon while the Greenwich mean Times was 22.00 hours on the same day. What is the longitude of town Y?
Akọwa Nkọwa
Ajụjụ 25 Ripọtì
Sheet erosion tends to be more serious than other forms of erosion because it
Akọwa Nkọwa
Sheet erosion tends to be more serious than other forms of erosion because it involves more widespread removal of soil from the land surface. Unlike other forms of erosion that remove soil from specific points, sheet erosion removes the topsoil and exposes the subsoil. The subsoil is not suitable for crop production, and the removal of the topsoil leads to soil infertility, which affects agricultural productivity. Additionally, sheet erosion is more difficult to control because it is caused by surface runoff, which is difficult to redirect or control, especially on sloping land.
Ajụjụ 26 Ripọtì
Which of the following countries is the leading producer of petroleum?
Akọwa Nkọwa
Among the four options given, Libya is the leading producer of petroleum. Libya is a country located in North Africa, with significant reserves of crude oil, making it one of the top oil producers in Africa and the world. Oil and gas production is the backbone of Libya's economy, accounting for over 90% of export earnings and more than 60% of its GDP. In recent years, Libya has consistently ranked among the top 20 oil-producing countries in the world, with an estimated 48 billion barrels of proven reserves. Therefore, Libya is the correct answer to the question.
Ajụjụ 27 Ripọtì
A feature formed from the solidification of highly fluid basic lava on the earth's surface is known as a
Akọwa Nkọwa
The feature formed from the solidification of highly fluid basic lava on the earth's surface is known as a "basalt plateau." A basalt plateau is a large area of flat, elevated land that is formed by the accumulation of layers of basaltic lava flows. These lava flows are usually highly fluid and can cover vast areas of land. As they cool and solidify, they form a thick layer of basalt rock that can be several hundred meters thick. Over time, erosion can remove the overlying rock and expose the basalt plateau. Basalt plateaus are common in volcanic regions and are found all over the world.
Ajụjụ 28 Ripọtì
The thin layer of unconsolidated mineral particles and organic matter covers land surface is called
Akọwa Nkọwa
The thin layer of unconsolidated mineral particles and organic matter that covers the land surface is called soil. Soil is a complex mixture of minerals, organic matter, water, and air, and it is a vital component of the Earth's ecosystems. Soil provides a medium for plant growth, supports the food chain by providing nutrients for organisms, filters water, and stores carbon. It is formed through the weathering of rocks and other geological processes, and it varies widely in composition, texture, and fertility depending on factors such as climate, vegetation, and topography.
Ajụjụ 29 Ripọtì
Which of the following is a major trading sea route between Nigeria and Western Europe?
Akọwa Nkọwa
Ajụjụ 30 Ripọtì
Which of the following is a feature of limestone regions?
Akọwa Nkọwa
Stalagmites are features of limestone regions. Limestone is a sedimentary rock formed from the accumulation of organic and inorganic materials, such as the remains of marine organisms and minerals, over time. It is composed primarily of calcium carbonate. Limestone regions are characterized by karst topography, which is characterized by sinkholes, caverns, and underground drainage systems. Stalagmites are formed in caves as a result of water dripping from the cave ceiling, depositing calcium carbonate on the cave floor over time. The resulting cone-shaped deposit grows upwards from the cave floor, forming a stalagmite.
Ajụjụ 32 Ripọtì
One of the features found in the upper course of a river is
Akọwa Nkọwa
The feature found in the upper course of a river is a gorge. This is a narrow and steep-sided valley that is usually formed as a result of erosion by fast-flowing water over a long period of time. The river in the upper course has a high gradient, and the water flows with greater force and velocity, thus eroding the rock and soil more efficiently. The rocks in the upper course of a river are typically harder, and the river may have to cut through them, forming a narrow and steep-sided valley known as a gorge. Gorges are often characterized by vertical cliffs or near-vertical cliffs, and they may have rapids and waterfalls where the river's gradient is steeper.
Ajụjụ 33 Ripọtì
The ultimate source of energy in the biosphere is
Akọwa Nkọwa
The ultimate source of energy in the biosphere is the sun. The sun emits electromagnetic radiation, including visible light, which is used by plants in the process of photosynthesis to produce organic compounds that store energy. These organic compounds are consumed by other organisms, transferring energy through the food chain. Therefore, without the sun, there would be no energy available for life to exist on Earth.
Ajụjụ 34 Ripọtì
The low level of trade among African countries is due to
Akọwa Nkọwa
The low level of trade among African countries is primarily due to the similarity of products they produce. Many African countries are reliant on the production of primary commodities, such as raw materials and agricultural products, and have a limited industrial base. This means that they often produce similar products, which reduces the need for them to trade with each other. Additionally, poor infrastructure, including transportation systems and communication networks, and trade barriers such as tariffs, import quotas, and bureaucratic red tape, also hinder trade among African countries. The high demand for home-made products and liberalization of trade are not major factors contributing to the low level of trade among African countries.
Ajụjụ 35 Ripọtì
Which of the following countries is not a member of the Economic Community of West African States(ECOWAS)?
Akọwa Nkọwa
The country that is not a member of the Economic Community of West African States (ECOWAS) is Cameroun. ECOWAS is a regional organization of West African countries that was established to promote economic integration among its member states. It was founded in 1975 and currently has 15 member states, including Mali, Niger, and Burkina Faso. However, Cameroon is not a West African country, and therefore, it is not a member of ECOWAS.
Ajụjụ 36 Ripọtì
With the aid of diagrams and examples, write explanatory notes on any two of the following:
(a) Rift valley (b) Horst (c) Volcanic mountain.
Akọwa Nkọwa
None
Ajụjụ 37 Ripọtì
(a) Draw an outline map of Nigeria. On the map, mark and name the following:
(i) two areas noted for inland fishing
(ii) one area noted for off-shore fishing
(iii) one important town in each of the areas shown on the map.
(b)(i) Name three methods of fishing in Nigeria
(ii) Identify four types of fish caught
(c) Outline three benefits of fishing to the Nigerian economy.
Akọwa Nkọwa
None
Ajụjụ 38 Ripọtì
(a) Draw an outline map of Africa. On the map, locate and name:
(i) the canary and the Madagascar Islands
(ii) Drakensberg mountain
(iii) Latitudes 37°N and 231/2°S.
(b) Describe the position and size of Africa in relation to other continents.
(a)
(i) The Canary Islands are located off the northwest coast of Africa, near the western Sahara desert. Madagascar Island is situated off the southeast coast of Africa, in the Indian Ocean.
Akọwa Nkọwa
(a)
(i) The Canary Islands are located off the northwest coast of Africa, near the western Sahara desert. Madagascar Island is situated off the southeast coast of Africa, in the Indian Ocean.
Ajụjụ 39 Ripọtì
(a) Explain five ways in which transportation contributes to the economic development of a country.
(b) Outline any five factors that can affect transport development in a country
Akọwa Nkọwa
None
Ajụjụ 40 Ripọtì
(a) Explain the term salinity
(b) Describe three factors that cause variations in the salinity of seas and oceans
(c) Outline three ways in which oceans are of importance to man.
Ajụjụ 41 Ripọtì
(a) (i) Explain the term settlement
(ii) Name two major types of settlement
(b) Highlight any four factors that influence the location of settlements
(c) Outline, with examples, any four functions of settlements.
Ajụjụ 42 Ripọtì
(a) Name four types of atmospheric resources
(b) Explain the usefulness of any two of the resources named in (a) above.
Akọwa Nkọwa
None
Ajụjụ 43 Ripọtì
(a) Draw a map of Africa. On the map, locate and name:
(i) an important area for the production of crude oil in Nigeria, Algeria and Libya
(ii) one important town in each area.
(b) Describe any three ways in which crude oil is of economic importance to any one of the countries in (a)(i) above.
(c) Outline three problems that face the production of crude oil in the country in (b) above.
Akọwa Nkọwa
None
Ajụjụ 44 Ripọtì
(a) What are sedimentary rocks?
(b) Name the three classes of sedimentary rocks according to their mode of formation.
(c) Describe one of the classes of sedimentary rocks in (b) above
(d) Outline four ways in which sedimentary rocks are of importance to man.
None
Akọwa Nkọwa
None
Ajụjụ 45 Ripọtì
(a) Explain the term Traversing
(b) A traverse along a path in a school compound produced the following field records:
| LINE | LENGTH (in metres) | BEARING |
| AB | 100 | 70º |
| BC | 350 | 120º |
| CD | 120 | 85º |
| DE | 75 | 55º |
Use the field records above to plot the path on a scale of 1 cm to 50 metres
(c) What is the distance, in metres, between A and E along the traverse line?
Ajụjụ 46 Ripọtì
Study the map extract on a scale of 1:50,000, and answer the following questions:
(a) (i) In your answer book, enlarge the square marked ABCD to twice its size.
(ii) Calculate and state the new scale
(b) On your new outline, mark and name:
(i) the main roads;
(ii) the settlement of EGBE;
(iii) a spot height.
(c) Shade an area below 1000 ft.
(d) Using the entire map, list three man-made features along the minor road between Oda Pete and Ogga.
(e) Describe the influence of relief on the location of settlements in the area covered by the map
Ajụjụ 47 Ripọtì
(a) Describe any five characteristics of manufacturing industries in Tropical Africa.
(b) Highlight five problems facing manufacturing industries in Tropical Africa.
Ajụjụ 49 Ripọtì
(a) Draw an outline map of Africa. On the map, show and name one area of:
(i) Equatorial climate
(ii) Tropical continental climate
(iii) Mediterranean climate
(iv) One important town each in (a)(i) and (ii) above.
(b) (i) Name the type of vegetation associated with the Tropical Continental Climate.
(ii) Outline four ways in which the vegetation named in
(b)(i) above has adapted to the climatic characteristics of the area.
(b) (i) The type of vegetation associated with the Tropical Continental Climate is savanna vegetation, also known as tropical grassland.
(ii) Savanna vegetation has adapted to the climatic characteristics of the Tropical Continental Climate in several ways. First, many plants in savannas have deep root systems to access groundwater during the dry season, helping them survive prolonged periods of drought. Second, savanna plants often have thick bark or waxy coatings on leaves to minimize water loss through transpiration. These adaptations help them conserve water in hot and dry conditions. Third, some savanna plants, such as acacias, have evolved thorns or toxins to deter herbivores, which are abundant in these open landscapes. This serves as a defense mechanism to protect against browsing animals. Fourth, savanna vegetation has developed mechanisms for rapid growth and reproduction during the brief rainy season, allowing them to take advantage of the limited period of favorable conditions for growth and seed dispersal. These adaptations collectively enable savanna vegetation to thrive in the challenging climatic conditions of the Tropical Continental Climate.
Akọwa Nkọwa
(b) (i) The type of vegetation associated with the Tropical Continental Climate is savanna vegetation, also known as tropical grassland.
(ii) Savanna vegetation has adapted to the climatic characteristics of the Tropical Continental Climate in several ways. First, many plants in savannas have deep root systems to access groundwater during the dry season, helping them survive prolonged periods of drought. Second, savanna plants often have thick bark or waxy coatings on leaves to minimize water loss through transpiration. These adaptations help them conserve water in hot and dry conditions. Third, some savanna plants, such as acacias, have evolved thorns or toxins to deter herbivores, which are abundant in these open landscapes. This serves as a defense mechanism to protect against browsing animals. Fourth, savanna vegetation has developed mechanisms for rapid growth and reproduction during the brief rainy season, allowing them to take advantage of the limited period of favorable conditions for growth and seed dispersal. These adaptations collectively enable savanna vegetation to thrive in the challenging climatic conditions of the Tropical Continental Climate.
Ajụjụ 50 Ripọtì
(a) Outline any two differences between Greek and Koppen's system of climatic classification.
(b) List any four major features of Kopapen's system.
(c) Describe any four features of the of climatic type (Tropical Rainforest Climate) in Koppen's classification.
Ajụjụ 51 Ripọtì
(a) Draw an outline map of Nigeria. On the map, show and name:
(i) one cattle rearing zone
(ii) three towns in the rearing zone
(iii) one direction of movement of cattle from the rearing zone to one named consuming area (use arrow).
(b) Outline three problems of cattle rearing in Nigeria
(c) How are these problems being solved?
Ajụjụ 52 Ripọtì
(a) Draw an outline map of Nigeria. On the map, show and name:
(i) the forest belts
(ii) an important town in each belt
(iii) the Lake Chad
(b) Describe three characteristics of any one of the forest belts shown on the map.
(c) Outline three ways in which the forest belts are of importance to Nigeria.
Akọwa Nkọwa
None
