WAEC SSCE - Geography - 2016
Question 1 Report
Which of the following statements is true about the drainage of the mapped area?
Answer Details
Question 2 Report
Which of the following cities is both a harbour and a capital?
Answer Details
The city that is both a harbor and a capital is Abidjan. A harbor is a place where ships can dock and unload their goods, while a capital is the main city or town that serves as the administrative center of a country. Abidjan is the largest city in Côte d'Ivoire, a country located in West Africa. It is situated on the southern coast of the country and has a large natural harbor. This harbor has made Abidjan a major center for trade and commerce in the region. In addition, Abidjan is also the capital of Côte d'Ivoire, making it the only city among the options provided that is both a harbor and a capital. In summary, Abidjan is the city that is both a harbor and a capital, due to its large natural harbor and status as the administrative center of Côte d'Ivoire.
Question 3 Report
The scale of the map in statement form is
Answer Details
The scale of a map is a ratio that compares the distance on the map to the actual distance on the ground. For example, a scale of 1:100,000 means that one unit of measurement on the map (such as 1 centimetre) represents 100,000 of the same units on the ground (such as 100,000 centimetres or 1 kilometre). Therefore, the answer to the question is that the scale of the map in statement form is the first option: "1 centimetre on the map represents 1 kilometre on the ground."
Question 5 Report
When the roof of a natural arch collapses, the resulting rock pillar left standing in the sea is called_____?
Answer Details
When the roof of a natural arch collapses due to the continuous erosion of the sea waves, the remaining rock pillar left standing in the sea is called a "stack". A stack is a geological landform that is formed as a result of erosion caused by the sea waves on the coast. These waves erode the softer rocks and cause the collapse of the roof of a natural arch, leaving a tall, vertical rock pillar that stands out from the sea. Over time, these stacks may also erode and eventually collapse, leaving behind a stump or a rocky platform.
Question 6 Report
Which of the following features is produced as a result of river capture?
Answer Details
The feature produced as a result of river capture is a wind gap. River capture, also known as river piracy, is a geomorphological phenomenon that occurs when one river captures the drainage of another river. This can happen when two rivers are flowing in opposite directions, but one river erodes its channel faster than the other, and eventually captures the other river's drainage. When this happens, the abandoned channel of the captured river, known as a wind gap, is left hanging above the level of the new river channel. Wind gaps are characterized by a narrow, steep-sided valley that has no river flowing through it, and can be seen as notches or depressions on the ridges between adjacent valleys. In summary, a wind gap is the feature produced as a result of river capture, which occurs when one river captures the drainage of another river. Wind gaps are abandoned channels of captured rivers that have a narrow, steep-sided valley with no river flowing through it.
Question 7 Report
Which of the following is not a timber producing country?
Answer Details
Senegal is not a timber producing country. Senegal is a predominantly arid country located in West Africa with limited forest resources, as such, it is not known for timber production. On the other hand, Garbon, Nigeria, and Cote D'Ivoire are known for their significant timber production and exportation.
Question 8 Report
Isothern is a line joining places of equal_______?
Answer Details
Isotherms are lines that join points of equal temperature on a map. This means that all the places along a particular isotherm will have the same temperature. So, if we were to plot the temperature at different locations on a map, we could draw lines connecting all the points that have the same temperature, and these lines would be called isotherms.
Question 9 Report
More hydro-electric power (H.E.P) projects should be constructed in developing countries because
Answer Details
Question 10 Report
The distance as the crow flies from Bebe to Bodel is
Answer Details
The distance as the crow flies from Bebe to Bodel is 10.00km. When we say "as the crow flies," it means the straight-line distance between two points, without taking into account any obstacles or the actual route that one would have to take to get from point A to point B. Therefore, if we measure the distance on a map using a ruler or any measuring tool, we would get the straight-line distance between Bebe and Bodel. In this case, the straight-line distance between Bebe and Bodel is 10.00km.
Question 11 Report
The planet which revolves around the sun in a clockwise direction is
Answer Details
There is no planet that revolves around the Sun in a clockwise direction. All planets in our solar system revolve around the Sun in a counterclockwise direction when viewed from above the Earth's North Pole. This is known as prograde motion. Uranus is the only planet that rotates on its side, which means that its north and south poles are almost where its equator is, and it appears to be spinning clockwise. However, when viewed from above the solar system, Uranus still orbits the Sun in a counterclockwise direction, just like all the other planets. Therefore, the answer to the question is none of the above.
Question 12 Report
It is light in weight, a good conductor of electricity and used extensively in the manufacture of aircraft. This is a valid description of
Answer Details
The description provided in the question fits the properties of aluminum. Aluminum is a lightweight metal with a low density, high strength-to-weight ratio, and is a good conductor of electricity. It is extensively used in the manufacture of aircraft, automobiles, and other transportation equipment due to its strength and lightness. Therefore, the correct option is Aluminum.
Question 13 Report
The high temperature in the interior of the earth may result in the formation of
Answer Details
The high temperature in the interior of the earth leads to the formation of a type of geothermal feature known as a geyser. A geyser is a vent in the Earth's surface that periodically ejects hot water and steam. The heat from the interior of the earth causes groundwater to boil, resulting in the explosive release of steam and hot water. The water erupts with great force, shooting up into the air in a spectacular display. Therefore, the answer to the question is C) Geyser.
Question 14 Report
The diagram above represents the export of rice in Kilogrammes from Country X between 2007 and 2010.
How much rice was produced in 2010 by Country X?
Answer Details
The diagram above shows the export of rice from Country X between 2007 and 2010. The vertical axis of the diagram represents the quantity of rice exported in kilograms, while the horizontal axis represents the year. To determine how much rice was produced in 2010 by Country X, we need to look at the point on the diagram that corresponds to 2010. We can see that the point is located at the top of the bar representing the quantity of rice exported in 2010. Reading off the value of the bar, we can see that the quantity of rice exported in 2010 was approximately 50,000 kilograms. Therefore, we can conclude that Country X produced around 50,000 kilograms of rice in 2010, based on the amount of rice that was exported. In summary, we can determine the amount of rice produced in 2010 by Country X by looking at the point on the diagram that corresponds to 2010 and reading off the value of the bar, which represents the quantity of rice exported in that year. Based on this information, we can conclude that Country X produced approximately 50,000 kilograms of rice in 2010.
Question 15 Report
The introduction of ECOWAS passport among member countries is to promote
Answer Details
The introduction of ECOWAS passport among member countries is to promote free movement of people in the sub-region. The ECOWAS passport allows citizens of ECOWAS member countries to travel within the sub-region without the need for a visa or entry permit. This promotes the free movement of people, which is one of the fundamental principles of ECOWAS. The aim is to facilitate regional integration, promote economic development, and enhance cultural cooperation among member states. By enabling free movement of people, the ECOWAS passport promotes trade and economic cooperation among member states, as it allows citizens to move freely and conduct business in different countries within the sub-region. Additionally, the ECOWAS passport also facilitates cultural cooperation by allowing people to travel and interact with different cultures and traditions in the sub-region.
Question 16 Report
Which of the following gases is found in very little qantity in the atmosphere?
Answer Details
Argon is found in very little quantity in the atmosphere. The Earth's atmosphere is composed of different gases, and they are present in varying amounts. The most abundant gas in the atmosphere is nitrogen, which makes up about 78% of the atmosphere. Oxygen is the second most abundant gas, making up about 21% of the atmosphere. Carbon dioxide, although a minor component, plays an essential role in the greenhouse effect, which helps to regulate the temperature of the Earth. Argon, on the other hand, is a noble gas that is chemically inert and does not react with other substances. It is present in the atmosphere in very small quantities, about 0.93%, making it one of the least abundant gases in the atmosphere. Argon is mostly obtained through the process of fractional distillation of liquid air, where it is separated from other gases such as nitrogen and oxygen.
Question 18 Report
The contour interval on the map is
Answer Details
The contour interval on a map represents the difference in elevation between two adjacent contour lines. Contour lines are used to represent the shape and relief of the land on a map. They connect points of equal elevation above a reference datum, such as mean sea level. The contour interval is the vertical distance between contour lines and is usually indicated in the map legend. A contour interval of 50 meters means that each contour line on the map represents an elevation that is 50 meters higher or lower than the adjacent line. Similarly, a contour interval of 100 meters means that each contour line represents an elevation that is 100 meters higher or lower than the adjacent line, and so on. Therefore, the correct answer to the question depends on the specific map being referred to. It could be any of the options given, or a different value altogether.
Question 19 Report
Irrigation projects are commonly found in area of
Answer Details
Irrigation projects are commonly found in areas of low and unreliable rainfall. This is because irrigation is the process of supplying water to crops in order to help them grow. If an area receives low and unreliable rainfall, the crops may not receive enough water to grow properly, which can lead to poor yields or crop failure. Irrigation helps to supplement the natural rainfall and ensures that crops have access to the water they need to grow. Therefore, areas with low and unreliable rainfall are more likely to have irrigation projects in order to support agriculture.
Question 21 Report
Exfoliation of rock is a result of
Answer Details
Exfoliation of rock is a result of mechanical weathering. It occurs when there is a rapid change in temperature, which causes rocks to expand and contract. Over time, this expansion and contraction causes the outer layer of the rock to peel away in thin sheets or layers, similar to the way an onion peels. This process is also known as thermal stress weathering, and it is common in areas with large diurnal temperature variations, such as deserts.
Question 22 Report
Which of the following settlements is famous for its ecclesiastical function?
Answer Details
Rome is famous for its ecclesiastical function. Ecclesiastical refers to anything related to the Christian Church, and Rome is the headquarters of the Roman Catholic Church. It is home to the Vatican City, an independent city-state and the seat of the Roman Catholic Church's leader, the Pope. Therefore, the answer to the question is D) Rome.
Question 24 Report
The diagram above represents the export of rice in Kilogrammes from Country X between 2007 and 2010.
In which year did Country X have the highest production of rice?
Answer Details
Question 25 Report
The planet with the shortest orbit around the sun is
Answer Details
The planet with the shortest orbit around the sun is Mercury. Orbit is the path taken by a planet around the sun. The time it takes for a planet to complete one orbit around the sun is called its orbital period. Mercury is the closest planet to the sun and also the smallest planet in the solar system. Due to its close proximity to the sun, it orbits the sun at a very high speed and takes only about 88 Earth days to complete one orbit. This makes it the planet with the shortest orbital period around the sun. In summary, Mercury is the planet with the shortest orbit around the sun because it takes only 88 Earth days to complete one orbit due to its close proximity to the sun.
Question 26 Report
Calculate the distance between the equator (latitude 0) and a city Z in Egypt (latitude 30N).
Answer Details
To calculate the distance between the equator (latitude 0) and a city Z in Egypt (latitude 30N), we need to use the formula for calculating the length of a meridian arc: distance = (latitude of Z) × 111.13 km Using this formula, we can calculate the distance between the equator and the city Z in Egypt as follows: distance = 30N × 111.13 km/N distance = 3,333.9 km Therefore, the correct answer is 3,330 km (rounded to the nearest 10 km).
Question 27 Report
What will be the time in Sao Luis, Brazil (Longitude 45o w) when it is noon in London (Longitude 0)?
Question 28 Report
The common modes of transportation in the mapped area are
Answer Details
To determine the common modes of transportation in the mapped area, we need to consider the available options and the geographical features of the area. Railway is a transportation system that runs on tracks and can transport goods and passengers efficiently. Water transportation, which includes shipping and boating, is also an important means of moving goods and people across long distances. Pipeline transportation is the use of pipes to transport fluids such as oil and gas over long distances. Air transportation involves the use of airplanes to transport people and goods across long distances. Considering the options provided, the most common modes of transportation in the mapped area are likely to be road and water. This is because roads are the most common means of transportation in most parts of the world, and water transportation can be very efficient for transporting goods and people along the coast or between islands. Railway and pipeline transportation are less likely to be common in the area, depending on the terrain and the availability of resources. Air transportation is also less likely to be common, as it is generally more expensive and less accessible than other modes of transportation.
Question 29 Report
Elements such as wind, water vapour, sunlight and gases which are of benefit to man, animals and plants are called
Answer Details
Elements such as wind, water vapour, sunlight and gases which are of benefit to man, animals and plants are called "atmospheric resources". These resources are important for various activities such as agriculture, transportation, and energy production. Sunlight is essential for photosynthesis in plants, while wind can be used for generating power. Water vapor is an important component of the water cycle, which is crucial for sustaining life on Earth. The gases present in the atmosphere, such as oxygen and nitrogen, are also important for respiration and other metabolic processes. Therefore, atmospheric resources are essential for the survival and well-being of living organisms on Earth.
Question 30 Report
The ozone layer is found in the
Answer Details
The ozone layer is found in the stratosphere. The atmosphere is divided into several layers based on their characteristics such as temperature, pressure, and composition. The stratosphere is the second layer of the atmosphere, located above the troposphere and below the mesosphere. It contains a high concentration of ozone, a gas made up of three oxygen atoms (O3). The ozone layer is a region within the stratosphere where ozone is concentrated. It plays a critical role in protecting life on Earth by absorbing harmful ultraviolet (UV) radiation from the sun, which can cause skin cancer, cataracts, and other health problems. In summary, the ozone layer is found in the stratosphere, which is the second layer of the atmosphere located above the troposphere. The ozone layer is important in protecting life on Earth by absorbing harmful UV radiation from the sun.
Question 31 Report
Africa is described as the most tropical continent because
Answer Details
Africa is described as the most tropical continent because most of its landmass lies within the tropics. The tropics are regions located close to the equator, between the Tropic of Cancer in the northern hemisphere and the Tropic of Capricorn in the southern hemisphere. These regions are characterized by a warm and humid climate throughout the year, with no distinct seasons. As such, Africa has a warm climate that is characterized by abundant rainfall, high humidity, and hot temperatures. This tropical climate makes it possible for a wide variety of flora and fauna to thrive in Africa, and it is one of the reasons why the continent is renowned for its rich biodiversity.
Question 32 Report
The most satisfactory explanation for the formation of fold mountain is
Answer Details
Fold mountains are formed as a result of compressional forces, which occur when two tectonic plates converge and push against each other. These forces cause the layers of rock to bend and buckle, forming folds in the Earth's crust. Over time, these folds can become more pronounced and eventually form mountains. The compression forces are caused by the movement of tectonic plates, which are massive slabs of rock that make up the Earth's crust. When two plates collide, one plate may be forced underneath the other, or they may both crumple and fold upwards, forming a mountain range. This process is different from faulting, which occurs when there is a sudden movement or rupture along a fault line, resulting in an earthquake. Vulcanicity is also different, as it refers to the movement of magma and volcanic activity, which can create new landforms but do not typically form fold mountains. Tensional forces, on the other hand, occur when tectonic plates are pulling away from each other, creating features such as rift valleys or mid-ocean ridges. Overall, the most satisfactory explanation for the formation of fold mountains is compressional forces caused by the convergence of tectonic plates.
Question 34 Report
The bearing of Bodel from Bebe is
Question 35 Report
In an oasis, water is derived from
Answer Details
An oasis is a fertile area in a desert where there is a supply of water. The water in an oasis is usually derived from underground sources such as aquifers or springs. As the surrounding area is arid and receives very little rainfall, the water supply in the oasis is a precious resource that is often carefully managed and conserved. Therefore, the correct option is "underground".
Question 37 Report
The cooling and solidification of magma within the earth's crust results in the formation of a
Answer Details
The cooling and solidification of magma within the Earth's crust results in the formation of a variety of geological features, including igneous rocks, volcanoes, and various types of landforms. When magma cools and solidifies underground, it can form a laccolith. A laccolith is a type of igneous intrusion that forms when magma is injected into overlying rock layers and then cools and solidifies, creating a dome-shaped structure with a flat bottom. Over time, erosion may remove the overlying rock, exposing the laccolith at the surface. Cinda cone, composite cone, and lava plateau are all landforms created by volcanic activity and not by the cooling and solidification of magma within the Earth's crust.
Question 38 Report
In the southern hemisphere, the summer solstice falls on
Answer Details
The summer solstice is the day with the longest period of daylight and the shortest night of the year. It occurs when the tilt of the Earth's axis is most inclined towards the sun. In the southern hemisphere, the summer solstice falls on December 22nd. This is because the Earth's axis is tilted away from the sun during the winter months in the southern hemisphere and towards the sun during the summer months. The summer solstice marks the point when the southern hemisphere is tilted closest to the sun and experiences the longest day of the year. Therefore, the summer solstice falls on December 22nd in the southern hemisphere, not on March 21st, September 23rd, or June 23rd.
Question 39 Report
Spits are formed by
Answer Details
Spits are narrow, elongated landforms that extend from the shoreline out into the water. They are formed by the action of waves, specifically longshore drift and wave deposition. Longshore drift is the movement of sand and other sediment along the shoreline caused by the angle of wave approach, while wave deposition is the process by which sediment is dropped off and deposited by waves as they slow down and lose energy. As waves approach the shoreline at an angle, they cause sediment to move along the shore. When the shoreline takes a bend, the waves slow down and deposit the sediment they are carrying, forming a spit. The direction of the spit is determined by the dominant direction of the waves and longshore drift. Over time, spits can grow longer and wider as more sediment is deposited by waves. Spits often have a curved or hooked shape at the end, which is caused by the change in direction of the waves as they reach the end of the spit.
Question 40 Report
Circular depression formed in the bed of an upper course river is known as
Answer Details
Question 41 Report
The point where R.Isbo meets R.Gembeh is called
Answer Details
The point where R.Isbo meets R.Gembeh is called a confluence. A confluence is a place where two or more rivers or streams meet and flow together. At a confluence, the water from the two rivers or streams merge and flow downstream as one body of water. Confluences are important features of rivers and streams because they can affect the water quality, ecology, and flow patterns of the rivers. They can also create unique habitats for aquatic plants and animals that depend on the specific conditions created by the merging of the two bodies of water. In the case of R.Isbo and R.Gembeh, the confluence marks the point where the two rivers meet and merge their waters. The combined flow of the two rivers downstream can create new habitats for aquatic plants and animals, as well as influence the water quality and flow patterns of the river system as a whole.
Question 42 Report
The diagram above represents the export of rice in Kilogrammes from Country X between 2007 and 2010.
The total production of rice in Kilogrammes by Country X from 2007 - 2010 was?
Answer Details
Question 43 Report
Leaching is the
Answer Details
Leaching is the washing down of soil nutrients, minerals, and other soluble components through the soil profile by the downward movement of water. When water moves through the soil, it dissolves and carries away soluble components such as nutrients, organic matter, and minerals, which are then transported to deeper layers of the soil or to groundwater. Leaching can be both natural and anthropogenic. Natural leaching occurs due to rainfall and other natural processes, while anthropogenic leaching can occur due to human activities such as irrigation, agriculture, and the use of fertilizers and pesticides. Leaching can have both positive and negative effects on soil health. It can help to remove excess salts and other harmful substances from the soil, making it more fertile and suitable for plant growth. However, excessive leaching can also result in the loss of valuable nutrients and minerals from the soil, leading to reduced soil fertility and productivity. In summary, leaching is the process by which soluble components in soil are dissolved and carried away by water, which can have both positive and negative effects on soil health.
Question 44 Report
The diagram above represents the export of rice in Kilogrammes from Country X between 2007 and 2010.
What is the name of the diagram above?
Answer Details
Question 46 Report
What is the name of the trade between one country and another?
Answer Details
The trade between one country and another is called international trade. It involves the exchange of goods and services between different countries. International trade is essential for the growth and development of a country's economy. It allows countries to specialize in producing and exporting goods and services that they can produce efficiently, while importing goods and services that they cannot produce efficiently. International trade provides many benefits to countries, including access to a wider variety of goods and services, increased competition, and greater opportunities for economic growth. It also allows countries to take advantage of economies of scale, which can lead to lower production costs and lower prices for consumers. Overall, international trade is an important aspect of the global economy, as it allows countries to exchange goods and services, promotes economic growth and development, and fosters cooperation and collaboration between different nations.
Question 47 Report
A village is characterized by
Answer Details
A village is a small settlement with a rural character. It is usually characterized by agriculture and other primary economic activities like farming, livestock keeping and fishing. The presence of several refineries or availability of tertiary health care facilities are not typical characteristics of a village. Additionally, developed infrastructural facilities such as good road networks, water supply and electricity are not commonly found in many villages.
Question 48 Report
Tilting of tree trunks, poles and piling of soil behind a wall are effects of
Answer Details
The tilting of tree trunks, poles, and piling of soil behind a wall are effects of soil creep. Soil creep is a slow and gradual movement of soil down a slope under the influence of gravity. It happens when soil particles are loosened by rain, freeze-thaw cycles, or other factors, and then they move slowly downhill due to gravity. The movement is often imperceptible, but it can cause visible effects like the tilting of tree trunks and poles, and the piling of soil behind a wall. Mud flow, rock slide, and landslide, on the other hand, are rapid movements of soil or rocks down a slope, and they usually happen as a result of a sudden disturbance like heavy rainfall or earthquake.
Question 49 Report
Which of the following climatic belts has the highest durnal temperature range?
Answer Details
The diurnal temperature range refers to the difference between the maximum and minimum temperature in a day. The climatic belt with the highest diurnal temperature range is the desert. Deserts are characterized by hot and dry weather conditions during the day and cold temperatures at night. This means that the diurnal temperature range in deserts is usually very high. During the day, the temperature in a desert can be very high, sometimes reaching up to 40-50°C, while at night it can drop to below freezing point. This large difference between the maximum and minimum temperatures makes the desert the climatic belt with the highest diurnal temperature range. In summary, the desert is the climatic belt with the highest diurnal temperature range, due to its hot and dry daytime temperatures and cold nighttime temperatures.
Question 50 Report
The cooling and solidification of magma within the earth's crust results in the formation of a
Answer Details
Question 51 Report
(a) State two advantages of industrialization in Nigeria.
(b) Explain four problems that retard industrialization in Nigeria.
(c) In four ways, describe how the problems in (b) above can be solved.
Question 52 Report
TEST OF PRACTICAL KNOWLEDGE QUESTION
(a) Define the term climate.
(b) Name the instrument used in measuring each of the following climate elements;
(i) temperature
(ii) pressure
(iii) rainfall
(iv) sunshine
(v) humidity
(c) In what four ways is the study of weather and climate important to man?
Question 53 Report
TEST OF PRACTICAL KNOWLEDGE QUESTION
(ai) Define the term solar system
(ii) List any five components of the solar system
(b) Outline any four characteristics of the earth.
Question 54 Report
TEST OF PRACTICAL KNOWLEDGE QUESTION
(ai) Highlight two ways in which water resources are classified
(ii) in what three ways can water resources be used?
(b) Describe three ways by which man's activities limit the use of water as a resources
None
Answer Details
None
Question 55 Report
(a) List four modes of transportation.
(b) Identify four constraints to inland water navigation.
(c) In what four ways can the constraints identified in (b) above be solved?
None
Answer Details
None
Question 56 Report
(a) State two objectives of the Economics Community of West African States (ECOWAS).
(b) Identify four problems hindering the achievement of the objectives of ECOWAS.
(c) In what four ways can the problems identified in (b) above be solved?
Answer Details
None
