JAMB UTME - Geography - 2018

An instrument used for setting out right angle in surveying a parcel of land is

Answer Details

Surveying or land surveying is the technique, profession, and science of determining the terrestrial or three-dimensional positions of points and the distances and angles between them

The lack of access to food in some parts of the world emanates from

Answer Details

The system of cultivation of tropical commercial crops estates is known as____________

Answer Details

The system of cultivation of tropical commercial crops estates is known as plantation agriculture. Plantation agriculture refers to a large-scale farming system where a single crop is grown on a large piece of land, usually in tropical countries. This type of agriculture is characterized by the use of large amounts of land, labor, and capital to cultivate crops such as rubber, sugar, coffee, cocoa, and tea. These crops are grown for commercial purposes, and the aim is to produce large quantities of a single product for export. The crops are typically grown in monoculture, which means that only one type of crop is grown in a particular area. This type of agriculture is often associated with the exploitation of workers, environmental degradation, and social and economic inequality.

Which of these hazard would most like result directly from deforestation?

Answer Details

Deforestation is the clearing of trees and other vegetation in a forested area. One of the most likely hazards that can result directly from deforestation is soil erosion. When trees are cut down, the roots that held the soil in place are also removed, leaving the soil exposed and vulnerable to erosion by wind and rain. With no tree cover to protect the soil, rainwater can wash away the topsoil, leading to soil erosion. This process can cause the soil to become less fertile, which can make it difficult for plants to grow and can ultimately lead to desertification. Additionally, deforestation can also lead to changes in the water cycle, which can result in decreased water availability, increased flooding, and other forms of water pollution. However, these hazards are less directly linked to deforestation than soil erosion.

Organic components of the soil include all the following except_______

Answer Details

The organic components of the soil include microorganisms, humus, and animal remains. The correct answer, therefore, is "rock pedestal." Rock pedestal, also known as bedrock, is a non-organic component of the soil. It is the solid, underlying layer of rock that makes up the Earth's crust. Bedrock does not contain any organic material, and it does not contribute to the fertility of the soil. On the other hand, the organic components of soil are essential for healthy plant growth. Microorganisms break down organic matter into nutrients that plants can absorb, while humus provides a rich source of nutrients for plant growth. Animal remains, such as dead insects or animal waste, can also provide organic material for the soil. In summary, while microorganisms, humus, and animal remains are all examples of organic components of soil, rock pedestal is a non-organic component and does not contribute to the fertility of the soil.

Which of the following countries has the least potential for the production of steel?

Answer Details

Among the options given, Cuba has the least potential for the production of steel. Cuba is a small island country in the Caribbean with a limited supply of natural resources, including iron ore and coal, which are essential raw materials for steel production. Cuba's iron reserves are low-quality and require significant processing to be suitable for steelmaking. Additionally, Cuba has limited access to modern steelmaking technology and expertise, which further restricts its potential for steel production. On the other hand, India, Japan, and Germany have significant potential for steel production. India is one of the world's largest producers of steel, with abundant iron ore reserves and a highly skilled workforce. Japan and Germany are also major players in the global steel industry, with advanced technology and ample access to raw materials.

In which of the following countries is cotton growing under irrigation the mainstay of the agricultural economy?

Answer Details

Cotton growing under irrigation is the mainstay of the agricultural economy in Sudan. Sudan is one of the largest producers of cotton in Africa and the world, and cotton farming is a major part of its agricultural economy. The country has a long history of growing cotton, with the industry dating back to the early 20th century. Cotton farming in Sudan is mainly done under irrigation due to the arid climate in most parts of the country. The irrigated areas for cotton farming are mainly found in the central and eastern regions of the country, such as the Gezira Scheme, which is one of the largest irrigation projects in the world. Cotton is a major export commodity for Sudan, and the industry employs a significant portion of the country's population. The government has made efforts to promote and support the cotton industry, with initiatives such as providing subsidies to farmers and investing in research and development to improve cotton production and quality. In summary, cotton growing under irrigation is the mainstay of the agricultural economy in Sudan, due to its favorable climate for cotton farming, long history of cotton production, and significant export earnings from the cotton industry.

Use the information given in the chart and answer the question. An alternative graphic method that can be used to depict the same information is the

Answer Details

Study the map and answer the question. Intervisibility is possible between the points marked X and Y because the intervening slope is

Answer Details

The difference between high tide and low tide is referred to as__________

Answer Details

The difference between high tide and low tide is referred to as "tidal range". Tidal range is the vertical distance between the highest water level of a high tide and the lowest water level of a low tide. In other words, it is the difference in height between the highest and lowest water levels during a tidal cycle. Tidal range can vary depending on the location, the phase of the moon, and other factors such as weather conditions. It is an important measurement for activities such as boating, fishing, and coastal engineering, as well as for understanding and predicting the effects of sea level changes on coastlines.

The innermost section of the Earth is the__________

Answer Details

The innermost section of the Earth is the core. The Earth's core is the central part of our planet, located beneath the mantle. It is composed primarily of iron and nickel, and is divided into two distinct layers: the outer core and the inner core. The outer core is a liquid layer that surrounds the solid inner core. The inner core is a solid, dense ball of metal that is about the size of the Moon. The core plays a crucial role in the Earth's magnetic field, which helps protect our planet from harmful solar radiation. The core also generates the heat that drives the movement of the Earth's tectonic plates, which causes earthquakes and volcanic eruptions. Understanding the properties and behavior of the Earth's core is an important area of research in the field of geophysics.

The greatest volcanic regions of Africa are found in

Answer Details

The greatest volcanic regions of Africa are found in two main areas: Kenya and Tanzania, and Sudan and Ethiopia. In Kenya and Tanzania, the Great Rift Valley runs through the region and is home to some of the most iconic volcanic features on the continent. The valley is characterized by a series of interconnected volcanoes, hot springs, geysers, and lakes. The most famous volcanic peaks in the area are Mount Kilimanjaro, Mount Kenya, and Mount Meru. In Sudan and Ethiopia, the East African Rift Valley also runs through the region and is another hotspot for volcanic activity. The valley is home to a number of active and dormant volcanoes, including Erta Ale, Nyiragongo, and Mount Karthala. In addition, the region is known for its geothermal activity, with numerous hot springs and geysers dotting the landscape. Both of these regions are characterized by their tectonic activity, with the movement of the Earth's crust leading to the formation of rift valleys, which in turn create the conditions for volcanic activity. The result is a stunning and unique landscape that draws visitors from all over the world.

Study the map and answer the question. The bearing of Jata from Adaba is approximately

Answer Details

To determine the approximate bearing of Jata from Adaba using the map, we need to look at the compass rose and use the scale provided. Looking at the compass rose, we can see that North is pointing towards the top of the map. To find the bearing of Jata from Adaba, we need to draw a straight line from Adaba to Jata on the map, and then measure the angle between this line and North using a protractor. Measuring this angle, we can see that it is approximately 21 degrees. Therefore, the bearing of Jata from Adaba is approximately 21°. Note that this is an approximation since we are using a ruler and protractor on a printed map, which may not be completely accurate. Additionally, the actual bearing of Jata from Adaba may differ slightly depending on the specific route taken.

Lines joining places with same mean annual rainfall are called___________

Answer Details

Lines joining places with the same mean annual rainfall are called isohyets. Isohyets are lines drawn on a map connecting points that receive the same amount of rainfall in a year. The word "isohyet" comes from the Greek words "iso" meaning "equal" and "hyetos" meaning "rain". These lines help us understand the patterns and distribution of rainfall over a certain area, and can be useful for various purposes such as agriculture, water management, and meteorology.

One of the following does not determine the availability of resources in a country____________

Answer Details

Evolution does not determine the availability of resources in a country. Evolution refers to the gradual changes in species over time through the process of natural selection. It has no direct effect on the availability of resources in a country. Population, emigration, and morbidity, on the other hand, can influence the availability of resources in a country. A large population can lead to increased demand for resources, while emigration can decrease the number of people using those resources. Morbidity, or the rate of illness and disease in a population, can also impact the availability of resources, as a large portion of the population may require medical attention and resources.

Use the diagram below to answer the question. The feature marked X in the diagram is a

Answer Details

The feature marked X in the diagram is a cliff. A cliff is a high and steep rock face or earth surface that drops abruptly from a higher to a lower level. It can also be defined as a steep slope or vertical surface, especially one at the edge of a body of water like the ocean or a lake. The diagram shows a rocky surface that slopes down dramatically towards the water, which is a clear indication that it is a cliff.

Use the information given in the chart and answer the question. If the total population of the city is 500,000 what is the population of ward 4?

Answer Details

The earth is enveloped by a mixture of gases referred to as the___________

Answer Details

The answer is "atmosphere". The atmosphere is the layer of gases that surrounds the Earth. It is made up of a mixture of gases, including nitrogen, oxygen, argon, carbon dioxide, and small amounts of other gases. The atmosphere protects the Earth from the harmful radiation from the sun and helps to regulate the temperature of the planet. It is divided into several layers, including the troposphere (where weather occurs) and the stratosphere (where the ozone layer is located). The atmosphere is essential for life on Earth, as it provides the air we breathe and plays a crucial role in the Earth's water cycle.

Use the diagram below to answer the question. The feature is one of the landforms associated with

Answer Details

The feature in the diagram is a sand dune, which is a landform associated with wind deposition. Sand dunes are formed when wind carries sand particles and deposits them in a particular location, creating a mound of sand. Over time, as the wind continues to blow, the sand dune may shift or change in shape. Sand dunes can be found in deserts, on beaches, and in other areas with high wind activity.

How were the major mountain belts of the world produced?

Answer Details

The major mountain belts of the world were produced by a geological process known as "folding". Over millions of years, immense pressure from tectonic plates caused rocks in the Earth's crust to buckle and fold, resulting in the formation of mountain ranges. This process is often associated with the collision of two tectonic plates, which can create enormous forces that push and compress rocks together, causing them to fold and uplift into mountains. Unlike weathering or wind erosion, which wear down and erode mountains over time, folding is a constructive process that builds mountains up. While rivers and other natural forces can contribute to the formation of mountains, they are generally not the primary cause of major mountain belts. Instead, the formation of mountain ranges is primarily driven by the slow but powerful movements of the Earth's tectonic plates over long periods of time.

Study the table given which shows the mean climatic conditions of station Q and answer the questions.

Answer Details

Based on the given mean climatic conditions, the station has a "Cool Temperate" climate. This is because the average temperature during the warmest month (July) is 19°C, which is below the threshold for a "Warm Temperate" or "Mediterranean" climate. Additionally, the average temperature during the coldest month (January) is -11°C, which is characteristic of a "Cool Temperate" or "Cold Temperate" climate. The amount of precipitation throughout the year is moderate, with the wettest month being July with 71mm of rainfall.

Lake Kivu and Malawi are related in that they_________

Answer Details

Lake Kivu and Lake Malawi are related in that they are both rift valley lakes. A rift valley lake is a type of lake that forms in a depression or basin created by tectonic activity. In the case of these two lakes, they were formed as a result of the East African Rift, which is a large geological rift that stretches for thousands of kilometers through Eastern Africa. The two lakes are located in different parts of the rift, with Lake Kivu in the western branch and Lake Malawi in the southern branch, but they share a common geological origin.

The feature marked X in the diagram is a ________

Answer Details

A sea stack is a geological land form consisting of a steep and often vertical column of rock in the sea near a coast.,formed by wave erosion.

Fluid basic lava flow is likely to give rise to a volcanic_____________

Answer Details

A volcano is a rupture in the crust of a planetary-mass object, such as Earth, that allows hot lava, volcanic ash, and gases to escape from a magma chamber below the surface.

The plains formed when the slopes of mountains are worn back in arid and semi-arid regions my mechanical weathering is called_______

Answer Details

The plains formed when the slopes of mountains are worn back in arid and semi-arid regions by mechanical weathering is called "Pediplains". Pediplains are a type of plain that form as a result of the gradual erosion and weathering of mountains and hills. They typically occur in arid and semi-arid regions where there is little vegetation to protect the land from erosion. Over time, as the wind, rain, and other natural forces wear away at the mountain slopes, sediment is carried downhill and deposited on the surrounding plain. This sediment can be made up of rocks, sand, and soil, and can create a relatively flat and gently sloping plain that extends out from the base of the mountain. Unlike other types of plains, such as alluvial plains or outwash plains, which are formed by water deposition, pediplains are formed by the mechanical weathering and erosion of rock and soil. They are typically found in regions where there is little precipitation and where the climate is dry and hot, which can help to speed up the weathering process.

One of the following is associated with wind deflation in arid region_________

Answer Details

Deflation is an action of wind when it picks up or remove loose particles from an area and leaves a denuded surface covered with coarse material too large for wind transport. The most noticeable results of deflation in some places are shallow depressions called blowouts

In which of the following rock types is petroleum mainly found?

Answer Details

Petroleum is mainly found in sedimentary rocks. Sedimentary rocks are formed from the accumulation and cementation of sediments, which can include organic matter such as dead plants and animals. Over time, this organic matter can become buried and subjected to heat and pressure, which can transform it into petroleum through a process called diagenesis. Petroleum is a fossil fuel that is composed of hydrocarbons, which are molecules made up of carbon and hydrogen atoms. The organic matter in sedimentary rocks that forms petroleum is usually derived from marine plants and animals that died and sank to the bottom of the ocean. Over time, these organic remains can be buried by layers of sediment, and the heat and pressure from the overlying rocks can cause them to be transformed into petroleum. While it is possible for petroleum to be found in other types of rocks, such as metamorphic rocks that have undergone extreme heat and pressure, sedimentary rocks are by far the most common type of rock that contains petroleum. This is because the process of petroleum formation requires the accumulation and burial of organic matter, which is most likely to occur in sedimentary environments such as oceans, lakes, and swamps.

How long does it take the mercury to make a complete revolution?

Answer Details

The answer is 88 days. Mercury is the planet closest to the Sun, and it orbits around the Sun at a very fast pace. It takes approximately 88 Earth days for Mercury to make one complete orbit around the Sun. This means that Mercury completes about 4 orbits in the time it takes Earth to complete 1 orbit. Because of its fast orbit and close proximity to the Sun, Mercury experiences extreme temperature variations, with temperatures ranging from over 800 degrees Fahrenheit during the day to -290 degrees Fahrenheit at night.

Study the table given which shows the mean climatic conditions of station Q and answer the questions.

Answer Details

The annual temperature range at station Q is calculated as the difference between the highest and the lowest temperature recorded in a year. The highest temperature recorded at the station in the given table is 19°C and the lowest temperature recorded is -11°C. Hence, the annual temperature range at the station Q is 19°C - (-11°C) = 30°C. So, the answer is 30°C.

A well will always contain water if its dug_________

Answer Details

The sans bearing water or the acquifier is a body of permeable rock which can contain or transmit water. The body (acquifier) is generally a rock with permeability and porosity. They can hold water and provide sufficient rate. If a well is drilled, one does not always get water unless the acquifier is reached

If the time at the Greenwich Meridian is 11.00am, what would the local time be at a place 750W?

Answer Details

Time at GMT is 11am, 150 = 1 hour, 750 gives us 5 hours

  The West looses, therefore

  11am - 5hours = 6:00am.

  Option D is the right answer, all other options are wrong

The Farthest planet from the sun in the solar system is_______

Answer Details

The farthest planet from the Sun in the solar system is Pluto. Pluto used to be considered the ninth planet in the solar system, but it was reclassified as a "dwarf planet" in 2006. Pluto's distance from the Sun varies because it has an elliptical orbit, which means that its distance from the Sun changes throughout its orbit. On average, Pluto is about 3.7 billion miles (5.9 billion kilometers) away from the Sun. This makes it much farther from the Sun than any of the eight "traditional" planets in the solar system, including Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune. So, to summarize, Pluto is the farthest planet from the Sun in our solar system, even though it's now classified as a dwarf planet.

Study the map and answer the question. The land-form feature at the centre of the map can best be described as

Answer Details

Study the map and answer the question. The Area covered by the map is approximately

Answer Details

Which of the following winds affects the West Indian Islands of the Caribbean?

Answer Details

Wind is the perceptible natural movement of the air, especially in the form of a current of air blowing from a particular direction

A desert country which has a high population density supported by irrigation is___________

Answer Details

Egypt is a desert country which has a high population density supported by irrigation. Irrigation is the process of supplying water to crops and lands to help them grow. In Egypt, the Nile River provides water for irrigation, allowing agriculture to flourish and supporting the country's large population. This is why Egypt is considered a good example of a desert country with a high population density that is supported by irrigation.

An alternative graphic method that can be used to depict the same information as a pie chart is the___________

Answer Details

A choropleth map is a thematic map in which areas are shaded or patterned in proportion to the measurement of the statistical variable being displayed on the map, such as population density or per-capita income.

The peeling off of surface layers of a rounded boulders during mechanical weathering is called________

Answer Details

The peeling off of surface layers of a rounded boulder during mechanical weathering is called exfoliation. Exfoliation is a type of mechanical weathering process that occurs when layers of rock or boulder peel off from the surface due to pressure release. The process usually occurs in rocks that have been exposed to intense heat, pressure, and other environmental factors for a long time. As a result of these factors, the rock expands and contracts repeatedly, causing the surface layers to crack and break apart. Over time, these cracks become wider, and the layers begin to peel off, revealing the smooth and rounded boulder underneath. Exfoliation is often seen in granitic rocks, where the outer layers peel off to form concentric layers resembling an onion. The process can also occur in other rock types such as sandstone and shale. Overall, exfoliation is an important geological process that contributes to the breakdown and erosion of rocks over time, shaping the landscape around us.

'It is universal and can reach almost every where'. Which transport mode is being referred to ?

Answer Details

The transport mode that is being referred to as universal and can reach almost everywhere is the road transport. Road transport refers to the movement of people, goods, or materials on roads using vehicles such as cars, buses, trucks, and motorcycles. The road network is extensive and well-developed in most parts of the world, making it possible for vehicles to reach even the most remote areas. Road transport is flexible and can adapt to different types of cargo, from small packages to large containers. It can also accommodate different types of trips, from short local trips to long-distance journeys. This versatility makes it an important mode of transport for both personal and commercial use. Overall, road transport is a crucial component of modern transportation systems and plays a significant role in the economy and daily life of people around the world.

Use the map below to answer the question. The major environmental problems associated with the area marked Y is

Answer Details