WAEC SSCE - Computer Studies - 2018

Which of the following components are data communication equipment?

I. Scanner ll. Hub lIl. Modem
 

Détails de la réponse

I and III are data communication equipment. A scanner is a device that captures images from photographs or documents and converts them into digital data that can be processed by a computer. A modem (short for modulator-demodulator) is a device that converts digital data into analog signals for transmission over analog networks (such as telephone lines) and vice versa. Modems are used to connect computers to the internet. A hub is a networking device that allows multiple devices to be connected together and share network resources. A hub does not modify the data being transmitted, but simply repeats the same data to all connected devices. So, a scanner is used to convert physical images into digital data and a modem is used to convert digital data into analog signals for transmission over analog networks.

Warm boot in computing is the same as?   

Détails de la réponse

The three levels of programming language?     

Détails de la réponse

The three levels of programming languages are: low-level language, high-level language, and assembly language. A low-level language is a type of programming language that provides little or no abstraction from the computer's instruction set architecture. This means that the code written in a low-level language is closer to the machine language that a computer can understand. Examples of low-level languages include machine language and assembly language. A high-level language is a type of programming language that provides a higher level of abstraction from the computer's instruction set architecture. This means that the code written in a high-level language is further away from the machine language that a computer can understand, but is closer to the natural language that humans use. High-level languages are easier for humans to read, write, and understand. Examples of high-level languages include Java, C, and Pascal. Assembly language is a type of low-level programming language that provides a level of abstraction between machine language and high-level languages. Assembly language uses mnemonics (symbols) to represent the instructions that a computer can understand. The code written in assembly language is still close to the machine language, but is easier for humans to read and write than machine language.

Identify the logic gate in figure 2.
 

Détails de la réponse

The MS-Windows shortcut keys to initiate warm booting is?       

Détails de la réponse

The MS-Windows shortcut key to initiate warm booting is Ctrl+Alt+Del. This combination of keys is also known as the three-finger salute. When you press these keys together, it brings up the Windows Security screen, which gives you options to lock the computer, switch users, sign out, change a password, or open the Task Manager. In addition, this key combination can also be used to restart the computer. After pressing Ctrl+Alt+Del, click on the power icon in the lower right corner of the screen and select "Restart" from the menu. This will initiate a warm boot, which means the computer is restarted without going through a complete power cycle. Warm booting is useful when you want to restart your computer quickly without shutting it down completely. It is also helpful when you are experiencing some performance issues or errors that can be resolved by restarting the computer.

The algebraic equation for the AND gate with input variables A and B is?     

Détails de la réponse

The common features of formula and function in spread- sheet are:

-Entry is preceded by = or + symbol I.

- They have fixed formats

- They operate with cell addresses

- Their results are displayed.

Which of the following options is/are true? 

Détails de la réponse

The command line prompt of MS-DOS operating system is represented as?    

Détails de la réponse

The process of testing the logic of programs to ensure they give correct result is known as?         

Détails de la réponse

A logic gate contains three input variables. The total possible combination of the input variables is?      

Détails de la réponse

The following are relational operators in QBASIC?  

Détails de la réponse

The speed of data transfer in the computer can be determined in terms of? 

Détails de la réponse

The speed of data transfer in a computer can be determined by two factors: bus speed and storage media. Bus speed refers to how fast data can travel between different components within a computer. It's like the speed limit on a highway; the higher the bus speed, the faster data can travel. Bus width, on the other hand, refers to how many bits of data can be transferred at once. It's like the number of lanes on a highway; the wider the bus, the more data can be transferred at once. Storage media, such as hard drives and solid-state drives, also play a role in data transfer speed. These devices have different read and write speeds, which determine how quickly data can be accessed and transferred. Protocols are also important for data transfer, as they dictate how data is transmitted and received. Different protocols have different speeds and efficiencies, and can impact the overall speed of data transfer. In summary, the speed of data transfer in a computer depends on both the bus speed and width, as well as the speed of the storage media and the protocols being used.

The most important system software in a computer system is the?       

Détails de la réponse

The most important system software in a computer system is the Operating System (OS). The operating system acts as the intermediary between the computer hardware and the applications you use. It manages the resources of the computer such as memory and processing power, and it provides a platform for you to run your applications on. It also provides a user interface, such as a graphical desktop, to interact with the computer. In a very simple way, you can think of the operating system as the "brain" of the computer that controls all the important functions and makes sure everything runs smoothly.

An icon, a graphic or a text in a document or a webpage that connects to another file or object is called a?      

Détails de la réponse

The correct answer is a hyperlink. A hyperlink is an icon, graphic, or text in a document or webpage that when clicked on, takes you to another file or object, such as another webpage or a specific location in the same webpage. It acts as a bridge between different web pages and allows you to move from one page to another with a simple click. You can recognize a hyperlink by its underlined blue color and when you hover your mouse over it, the cursor turns into a hand symbol.

The system unit houses the following components except?     

Détails de la réponse

The system unit is the main part of a desktop computer that contains all the essential components needed for the computer to work. These components include the motherboard, central processing unit (CPU), and various other storage devices like hard drives or SSDs. Out of the options listed, the component that is not housed in the system unit is the plotter. A plotter is a printing device that is used to produce high-quality graphics and drawings, typically used in engineering and architectural designs. It is a separate device that connects to the computer and is not a part of the system unit. In summary, the system unit contains important components like the motherboard and CPU, but a plotter is not housed inside the system unit.

Data can be defined as?    

Détails de la réponse

Data refers to raw facts or figures that are collected through various means such as observations, experiments, surveys, and measurements. It can be any type of information that can be stored and processed, including numbers, text, images, and sound. Raw data is unprocessed and lacks any structure or organization. It needs to be processed and analyzed to extract meaningful insights and useful information. For example, a list of sales figures is data, but the total revenue and average sales figures derived from it are processed information. Therefore, out of the given options, data can be defined as raw facts.

Arrange the following spreadsheet window parts in a hierarchial order by size:
I. worksheet
II. cell
III. workshop
IV. range

Détails de la réponse

The following programs are general purposotion software except?     

Détails de la réponse

Out of the four options given, CorelDraw, MS Access, and MS Word are general-purpose software, while "Editor" is not a specific software application. It could refer to a generic term for any software that allows users to edit or modify text, graphics, or other types of data. CorelDraw is a vector graphics editor that allows users to create and edit vector images and designs. It is widely used by graphic designers, illustrators, and artists to create logos, brochures, web graphics, and other types of visual content. MS Access is a database management system that allows users to store, organize, and manage large amounts of data. It provides a graphical user interface for creating tables, forms, reports, and queries, and is often used by businesses and organizations to manage customer data, sales records, and other types of information. MS Word is a word processing program that allows users to create, edit, and format text documents. It is widely used for creating letters, reports, resumes, and other types of written content. In summary, three out of the four programs mentioned (CorelDraw, MS Access, and MS Word) are general-purpose software, while "Editor" is not a specific application and could refer to any software that allows users to edit or modify data.

The statement in QBASIC that is used to add data at the end of existing sequential file is?

Détails de la réponse

The statement in QBASIC that is used to add data at the end of an existing sequential file is "APPEND".

When you open a sequential file for writing, by default, it starts writing from the beginning of the file and overwrites any existing data. However, if you want to add data to the end of the file, without deleting or overwriting the existing data, you can use the "APPEND" statement.

The "APPEND" statement opens the file for writing, but instead of overwriting the existing data, it positions the write pointer at the end of the file, allowing you to add new data to the file without affecting the existing data.

Here's an example of how to use the "APPEND" statement in QBASIC:

OPEN "my_file.txt" FOR APPEND AS #1
PRINT #1, "This is some new data added to the end of the file."
CLOSE #1

In this example, the "OPEN" statement opens the file "my_file.txt" for appending. The "PRINT" statement writes the new data to the end of the file, and the "CLOSE" statement closes the file.

Figure 1 is a logic gate. Use it to answer question 17.

Détails de la réponse

If you are given the contract, what would be your first step of action?        

Détails de la réponse

Which of the following options is a biometric data?     

Détails de la réponse

Which of the following options is not an advantage of  linear bus topology?     

Détails de la réponse

The basic computer operation involves the following except?    

Détails de la réponse

Which of the following programs is an application specific?     

Détails de la réponse

QBASIC keywords do not include?   

Détails de la réponse

The QBASIC keywords that do not include are "FIND B". This is because "FIND B" is not a valid QBASIC keyword. On the other hand, "LET C", "REM D", and "STOP" are valid QBASIC keywords. "LET" is used to assign a value to a variable, "REM" is used to add a comment in the code, and "STOP" is used to halt the execution of the program. It's important to note that QBASIC keywords are specific words that have a predefined meaning in the QBASIC programming language. Understanding these keywords is essential for writing correct and functional QBASIC programs.

The following are the guidelines for drawing flowcharts except that it?     

Détails de la réponse

The largest component in a spreadsheet is?       

Détails de la réponse

Use the infomation belowto answer questions 42 and 43.

As a computer professional, you have just been con- tracted by a school to help them solve the problem they are facing in computing students' results.

The school currently runs a manual system. Time and accuracy of the result are the major concerns.

What would you advise the school to do?     

Détails de la réponse

As a computer professional, my advice to the school would be to automate the system. Automating the system involves using computer software to process and compute the students' results. This would eliminate the need for manual calculations and reduce the time required to produce accurate results. With automation, the school can also easily store and retrieve student records, generate reports, and analyze data. It is a cost-effective and efficient solution that will help the school to produce reliable results in a timely manner. Closing down the school or increasing the number of staff or buying more calculators for staff would not solve the problem of time and accuracy of the result, and would only lead to more expenses without solving the underlying issue.

The conversion of readable data to unreadable codes in order to prevent unauthorised access is known as?    

Détails de la réponse

The term used for the conversion of readable data to unreadable codes in order to prevent unauthorized access is called encryption. Encryption is a process of converting plain text into a coded form called ciphertext that can only be deciphered with the right key. The idea behind encryption is to make it difficult for unauthorized individuals to access or understand the data. This helps to ensure the confidentiality and security of the information. In simple terms, encryption helps to protect sensitive information from being seen by anyone other than those who are authorized to view it.

The process of restarting the computer system is known as?     

Détails de la réponse

The process of restarting a computer system is commonly referred to as a "reboot" or a "restart." This involves shutting down the system and then starting it up again. There are two types of reboots: "cold boot" and "warm boot." A cold boot is when the computer is completely powered off and then started again. This is typically done by pressing the power button or shutting down the computer through the operating system and then restarting it. A warm boot, on the other hand, is when the computer is restarted without being powered off. This can be done by pressing the reset button on the computer or by using a keyboard shortcut, such as "Ctrl + Alt + Delete." "Hard booting" and "hot bathing" are not common terms used to describe the process of restarting a computer system.

The file that contains historical record is called a?   

Détails de la réponse

The file that contains a historical record is called a "data file." This is because a data file stores information in a structured manner, often in rows and columns, and it can include historical data as well as current data. A data file can be used for various purposes such as record-keeping, analysis, and reporting. For example, a company might use a data file to store historical sales data for analysis and forecasting purposes. Similarly, a researcher might use a data file to store historical data related to a particular topic for analysis and interpretation. Therefore, the term "data file" accurately reflects the function and purpose of a file that contains historical records.

Random file organisation is also known as?    

Détails de la réponse

Which of the following computer files can be used for updating the master file?
 

Détails de la réponse

During program execution in the central processing unit, the instruction is interpreted by the?   

Détails de la réponse

A  site engineer intends to acquire a computer system. What factors Will he consider if he must choose a notebook computer over a desktop computer?

Détails de la réponse

One megabyte is equivalent to?
 

Détails de la réponse

One megabyte (MB) is equivalent to 1024 kilobytes (KB). To understand this, we first need to know that a byte is a unit of digital information that is made up of 8 bits. A bit is the smallest unit of digital information that can be stored or transmitted, and it can have a value of either 0 or 1. Now, a kilobyte (KB) is equal to 1024 bytes, and a megabyte (MB) is equal to 1024 kilobytes. So, one megabyte is equal to 1024 x 1024 = 1,048,576 bytes. It's important to note that there are two common interpretations of "mega" in the context of digital storage: the binary interpretation (2^20, or 1,048,576), and the decimal interpretation (10^6, or 1,000,000). The binary interpretation is used in most cases, including for measuring RAM and hard drive space. However, the decimal interpretation is sometimes used for measuring network data transfer rates. So, in short, one megabyte is equivalent to 1,048,576 bytes or 1024 kilobytes.

The number 28 in binary is?       

Détails de la réponse

The binary number system uses only two digits, 0 and 1, to represent all values. To convert a decimal number, such as 28, to binary, we can repeatedly divide the decimal number by 2 and keep track of the remainders. The binary representation of 28 is 11100. Here's how the conversion works: 28 ÷ 2 = 14 with a remainder of 0 14 ÷ 2 = 7 with a remainder of 0 7 ÷ 2 = 3 with a remainder of 1 3 ÷ 2 = 1 with a remainder of 1 1 ÷ 2 = 0 with a remainder of 1 So, the binary representation of 28 is 11100, with the rightmost digit being the least significant bit.

The major components of a computer system are?        

Détails de la réponse

The major components of a computer system are hardware and software. Hardware refers to the physical components of a computer, such as the motherboard, central processing unit (CPU), memory (RAM), hard drive, and others. These components work together to perform the basic functions of a computer. Software, on the other hand, refers to the programs and applications that run on a computer. This includes the operating system (such as Windows or macOS), as well as other applications like word processors, web browsers, and games. Firmware is a type of software that is stored on a hardware device, such as a computer's BIOS or a device's firmware. It provides low-level control for the hardware components and is typically not user-accessible or modifiable. In summary, a computer system is made up of both hardware and software components, with firmware serving as a type of software that is closely tied to the computer's hardware.

Use the logic truth table in figure 3 to answer question
 

Given that X and Y are input variables while Z is the output. The truth table in figure 3 represents?

Détails de la réponse

The system unit houses the following components except?     

Détails de la réponse

The system unit houses components that are essential to the functioning of a computer. However, it does not include a plotter. A plotter is a type of large-format printer that is used to print high-quality images or technical drawings. It is not a component that is typically found inside a system unit. The other options listed (motherboard, floppy disk, and central processing unit) are all commonly found inside a system unit.

The pre-computing age device which made use of beads and frames is?     

Détails de la réponse

The device that made use of beads and frames is called an Abacus. An abacus is a simple counting tool that consists of a wooden frame with parallel rods or wires running along its length. Beads or stones are strung on these rods or wires, and they can be moved back and forth to perform calculations. Abacuses were used in many ancient cultures, including China, Japan, and Egypt, and they are still used in some parts of the world today. They were particularly useful for merchants and traders who needed to perform quick calculations, and they were also used by scholars to teach mathematical concepts. To use an abacus, you move the beads along the rods to represent numbers. For example, if you wanted to represent the number 23, you would move two beads on the top row and three beads on the bottom row. You can then add, subtract, multiply, and divide by moving the beads in different ways. Overall, the abacus was a simple but effective device that played an important role in the development of mathematics and computing.

which of the following network cables offers highest data transmission?

Détails de la réponse

The uses of spreadsheet packages include:

1. -Preparing organisation's logo;   II. - Performing sensitivity analysis; III, - Preparing reports for senior manage- ment; IV. - Preparation of profit forecasts.

Which of the following options is true?    

Détails de la réponse

A row in a database table is referred to as? 

Détails de la réponse

A row in a database table is commonly referred to as a "record". A record represents a single instance of data within the table, and contains all the information related to a specific item or entity. For example, in a database table for a library, a record might represent a single book and its attributes, such as title, author, ISBN number, and publication date. Each attribute in the record is typically stored in a separate "field".

Which of the following charts does not display the X and Y axes?   

Détails de la réponse

The Doughnut chart does not display the X and Y axes. A Doughnut chart is a circular chart that is used to represent proportions and ratios. It is divided into segments that each represent a proportion of the whole. Unlike bar charts and X, Y graphs, doughnut charts do not have X and Y axes. The data is represented by the size and color of the segments in the chart.

The following components are network interconnecting devices EXCEPT?   

Détails de la réponse

Out of the four options listed, the component that is not a network interconnecting device is a webcam. A webcam is a device that captures video and sends it to a computer, where it can be transmitted over the internet. However, it is not a device that interconnects networks; it simply sends information from one device to another. Hubs, modems, and routers, on the other hand, are devices that help connect and manage multiple devices on a network.

The ASCII chart control characters using numeric codes ranging from?      

Détails de la réponse

The ASCII chart control characters use numeric codes ranging from 0 to 127. ASCII stands for American Standard Code for Information Interchange and is a system for representing characters (letters, numbers, symbols, etc.) as numbers. Control characters are special characters in the ASCII chart that are used to control the format or flow of data. These characters include things like line breaks, tabs, and other non-printing characters. The ASCII chart assigns a unique number to each character, and the control characters are assigned numbers between 0 and 127.

The largest computer system in terms of processing power is A?    

Détails de la réponse

The largest computer system in terms of processing power is a supercomputer. A supercomputer is a type of computer that is specifically designed to perform incredibly complex and demanding computational tasks faster and more efficiently than any other type of computer. Supercomputers use many processors working in parallel, as well as large amounts of high-speed memory and specialized hardware, to perform their tasks at incredibly high speeds. They are used for tasks such as weather forecasting, scientific simulations, and military applications, where the ability to process vast amounts of data and perform complex calculations is critical.

Which of the following output devices was common among the computing devices of the 19th century?        

Détails de la réponse

Which of the following options is not a data type?      

Détails de la réponse

"Valid data" is not a data type. Data types are categories of data that define what type of values a variable can hold, such as alphabetic characters, numbers, or a combination of both (alphanumeric). The term "valid data" refers to data that meets certain criteria, such as being within a specified range, having a certain format, or being free of errors. But it is not a type of data in the same sense as alphabetic, alphanumeric, or numeric data.

(a) What is a register?

(b) List two types of register.

(c) State three functions of registers.

(d) Outline three differences between a register and main memory.

Détails de la réponse

None

TEST OF PRACTICAL KNOWLEDGE QUESTION

INSTRUCTIONS: (a) Sort the table on SURNAME and FIRST NAME in ascending order.

(b) Delete the record for employee 279.

(c) Create a report from the table and name it SALARY. The header of the report should read "EMPLOYEE SALARY".

(d) Format:

(i) the column headings of the report with font size 14pt and bold;

(ii) the other inputs with, font size 12pt.

(e) Apply border line.

(f) Insert your full name and index number.

(g) Print and submit to the supervisor

Détails de la réponse

None

(a) What is: (i) an array; (ii) a syntax error?

(b) Write QBASIC program that will input multiples of Three between 1 and 20 into a one-dimensional array and display the output on the screen.

(c) Convert D5FA,, to binary.

Détails de la réponse

None

TEST OF PRACTICAL KNOWLEDGE QUESTION

Insert a:

(i) new column with the heading "Name" between the first and second columns;

(ii) title "Students' Scores in Computer Studies" above the table.

(c) Beginning from the first cell under column heading "Name" to the sixth cell, type the following: Adedigba Eze, Balango Ngozi, Agbelero Cynthia, Okeowo Sulkite, Okonia Ifedola and Umaru Edonk.

(d) If "W/score" stands for weighted score, calculate:

(i) weighted score for each term given that weighted score comprises 20%, 30% and 50% of raw scores for first, second and third terms respectively;

(ii) total weighted score for the three terms.

(e) Insert your full name and index number as a footer.

(f) Save with your index number in the folder created.

(g) Print and submit to the supervisor

Détails de la réponse

None

(a)i) Define the term computer system.

(i) List the major components of the computer system and give one example of each.

(b)(i) List two activities involved in transferring data into information. (i) Write the following acronyms in full:

(1) EDSAC (11) EDVAC

Détails de la réponse

None