WAEC SSCE - Chemistry - 2020 (Objective)

View Answer

Question 2 Report

The boiling point of pentane is higher than that of propane because?

carbon-carbon single bonds are stronger than carbon-hydrogen bonds.

Pentane has more covalent bonds to break

Pentane does not burn easily as propane

The intermolecular forces in pentane are stronger than those of propane

Chemical Combination

View Answer

Question 3 Report

Which of the following pairs of properties of alkali metals decreases down the group?

First ionization energy and reactivity

melting point and atomic radius

Reactivity and electronegativity

First ionization energy and melting point

Answer Details

The pair of properties of alkali metals that decreases down the group is "first ionization energy and melting point". First ionization energy refers to the energy required to remove an electron from an atom. As we move down the group in the periodic table, the number of occupied energy levels increases, resulting in an increase in the distance between the nucleus and the outermost electron. This means that the force of attraction between the nucleus and the outermost electron decreases, making it easier to remove the electron. Hence, the first ionization energy decreases down the group. Melting point refers to the temperature at which a solid substance changes into a liquid state. As we move down the group, the size of the atoms increases due to the addition of new electron shells. This results in weaker metallic bonding between the atoms, which requires less energy to overcome, leading to a decrease in melting point down the group. Therefore, the correct pair of properties that decrease down the group for alkali metals is "first ionization energy and melting point".

Read lesson note on Chemical Combination (JAMB)

Read lesson note on Atomic Structure And Bonding (JAMB)

Chemical Combination

View Answer

Question 4 Report

When an ionic bond is broken, bonding electrons are

shared between participating atoms

gained by the most electropositive atom

gained by the most electronegative atom

lost by both participating atoms.

View Answer

Question 5 Report

Group VIl elements in their combined states are called?

Halogens

Anions

Halide

Cations

Answer Details

The group VII elements in their combined states are called "halides". Halides are compounds formed when a halogen (a group VII element) reacts with another element to gain an electron and form an anion. Halides are important in many chemical reactions, particularly in organic chemistry and in the production of materials like plastics and pharmaceuticals. Halides are generally very reactive, and some, such as chlorine, are used as disinfectants due to their ability to kill bacteria and other microorganisms. Overall, halides are an important class of compounds that play a critical role in many chemical processes.

View Answer

Question 6 Report

Which of the following compounds would release hydrogen when reacted with sodium metal?

I. CH\(_3\)COOH

II. CH\(_3\)CH\(_2\)OH

III. CH\(_3\)COOCH\(_3\)

I only

I and II only

Il and IIl only

I and Ill only

Acids, Bases And Salts

View Answer

Question 7 Report

Which or the following products could be formed during incomplete combustion of a hydrocarbon.

i.Carbon ii. Hydrogen III. Carbon (Il) oxide

I only

I and II only

I and III only

II and III only

Answer Details

Incomplete combustion of hydrocarbons occurs when there is not enough oxygen present for complete oxidation. As a result, the hydrocarbon molecule may not be fully broken down and can produce various products. One of the primary products of incomplete combustion is carbon, which can appear as soot or black smoke. This occurs because the carbon in the hydrocarbon molecule is not fully oxidized and instead forms solid particles that are released into the air. Another product that can form is carbon monoxide (CO), which is a toxic gas. Incomplete combustion can result in the formation of CO when there is not enough oxygen present to fully oxidize the carbon in the hydrocarbon molecule. Hydrogen, on the other hand, is not typically a product of incomplete combustion as it is fully oxidized to form water (H2O) when sufficient oxygen is present. Therefore, the correct answer is option (C) I and III only, as incomplete combustion of a hydrocarbon can produce carbon and carbon monoxide.

Read lesson note on Chemistry Of Carbon Compounds (Nigeria Only) (WAEC)

View Answer

Question 8 Report

Which of the following hydroxides is not readily soluble in water?

NH\(_4\)OH

Ca(OH)\(_2\)

NaOH

KOH

Answer Details

Among the given options, calcium hydroxide (Ca(OH)\(_2\)) is not readily soluble in water. When an ionic compound dissolves in water, its constituent ions separate and become surrounded by water molecules in a process called hydration. The solubility of a compound depends on the strength of the attractive forces between the ions in the compound and the water molecules. Calcium hydroxide is an ionic compound composed of calcium ions (Ca\(^{2+}\)) and hydroxide ions (OH\(^-\)). When calcium hydroxide dissolves in water, it undergoes a dissociation reaction, releasing calcium ions and hydroxide ions into the solution: Ca(OH)2 (s) → Ca\(^{2+}\) (aq) + 2OH\(^-\) (aq) However, calcium hydroxide is only slightly soluble in water. This means that it only dissolves to a limited extent in water and forms a suspension or a precipitate. On the other hand, NH\(_4\)OH, NaOH, and KOH are all readily soluble in water, which means they dissolve easily in water and form clear, homogeneous solutions. In summary, calcium hydroxide is not readily soluble in water, while NH\(_4\)OH, NaOH, and KOH are readily soluble in water.

Read lesson note on Acids, Bases And Salts (Ghana Only) (WAEC)

Acids, Bases And Salts (Ghana Only)

View Answer

Question 9 Report

Dilution factor is the?

amount of distilled water that is added to the concentrated solution to dilute it

Quantity of distilled water added to l dm\(^3\) of the concentrated solution to give the dilute solution

number of times the volume of the concentrated solution is diluted to give the dilute solution

act of diluting the concentrated solution to obtain the dilute solution

Solubility Of Substances (Ghana Only)

View Answer

Question 10 Report

The type of isomerism exhibited by cis and trans isomers is?

positional

geometrical

functional

optical

Answer Details

The type of isomerism exhibited by cis and trans isomers is geometrical isomerism. Geometrical isomerism is a type of stereoisomerism where compounds have the same molecular formula and the same sequence of bonded atoms, but differ in the spatial arrangement of their atoms due to restricted rotation around a double bond or a ring structure. Cis-trans isomerism occurs specifically in compounds with double bonds or ring structures, where two different groups or atoms are attached to each carbon of the double bond or ring. In cis isomers, the two identical groups or atoms are on the same side of the double bond or ring, while in trans isomers, they are on opposite sides. For example, in the case of cis-trans isomerism in alkenes, a cis isomer would have the substituents on the same side of the double bond, while a trans isomer would have the substituents on opposite sides of the double bond. This results in different physical and chemical properties, such as melting point, boiling point, and reactivity. Therefore, cis-trans isomerism is a type of geometrical isomerism where compounds have the same molecular formula and bonding sequence but differ in the spatial arrangement of their atoms due to the presence of a double bond or a ring structure.

Read lesson note on Chemistry Of Carbon Compounds (Ghana Only) (WAEC)

Chemistry Of Carbon Compounds (Ghana Only)

View Answer

Question 11 Report

"Electrons always occupy the lowest empty energy level" is a statement of

Aufbau Principle

Hund's rule

Pauli Exclusion Principle

Periodic law

Answer Details

The statement "Electrons always occupy the lowest empty energy level" is a statement of the Aufbau Principle. This principle explains how electrons fill the available energy levels of an atom, starting with the lowest energy level and moving to higher energy levels. The Aufbau Principle tells us that electrons will occupy the lowest available energy level first before moving to higher energy levels. This means that the first energy level will be filled before the second energy level, and so on. Additionally, each energy level can only hold a certain number of electrons, which is determined by the periodic table. Overall, the Aufbau Principle helps to explain the electron configurations of atoms and how they behave in chemical reactions. By following this principle, we can predict the electron configurations of different elements and understand how they will react with other elements.

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 12 Report

What volume of oxygen at s.t.p is required to burn completely 7.5 dm\(^3\) of methane according to the following equation?

CH\(_4\) \(_g\) + 20\(_2\) \(_g\) → CO\(_2\) \(_g\) + H\(_2\)O\(_g\)

3.75 dm\(^3\)

7.59 dm\(^3\)

15.0 dm\(^3\)

30.0dm\(^3\)

Answer Details

To find the volume of oxygen required to burn 7.5 dm\(^3\) of methane, we need to balance the chemical equation for the reaction. The balanced equation is: CH\(_4\) \(_g\) + 2O\(_2\) \(_g\) → CO\(_2\) \(_g\) + 2H\(_2\)O\(_g\) This equation tells us that for every molecule of methane that reacts, 2 molecules of oxygen are required. So, for 7.5 dm\(^3\) of methane, we need 2 * 7.5 = 15 dm\(^3\) of oxygen. So, the volume of oxygen required to burn 7.5 dm\(^3\) of methane at s.t.p is 15.0 dm\(^3\).

Read lesson note on Stoichiometry And Chemical Reactions (WAEC)

View Answer

Question 13 Report

The most suitable process of obtaining water from an aqueous solution of sugar i

Crystallization

Distillation

Filtration

Decantation

Answer Details

The most suitable process for obtaining water from an aqueous solution of sugar is distillation. Distillation is a process that separates components of a mixture based on their boiling points. In this case, water has a lower boiling point than sugar, so by heating the solution, the water will evaporate and can be collected as a separate liquid. The sugar will remain in the original container as a solid or concentrated solution. Crystallization is a process that separates components of a mixture based on their solubility, but it is not effective for separating water from sugar as both components are soluble in each other. Filtration and decantation are processes used for separating solids from liquids or liquids with different densities, but they are not effective for separating water from sugar as both are liquids with similar densities.

Read lesson note on Solubility Of Substances (Ghana Only) (WAEC)

Solubility Of Substances (Ghana Only)

View Answer

Question 14 Report

Which or the following substances is a polypeptide?

Starch

Glycogen

Protein

Fats

Answer Details

A polypeptide is a polymer made up of amino acids, which are linked by peptide bonds. Therefore, the substance that is a polypeptide is protein. Starch and glycogen are both polysaccharides, which are polymers made up of monosaccharides, such as glucose. They are not polypeptides. Fats are lipids, which are molecules that are not made up of repeating units of the same type of monomer. They are not polypeptides. Proteins, on the other hand, are made up of long chains of amino acids linked by peptide bonds, forming polypeptides. So, protein is the correct answer to the question.

Read lesson note on Chemistry Of Carbon Compounds (Nigeria Only) (WAEC)

Read lesson note on Basic Biochemistry And Synthetic Polymers (WAEC)

Basic Biochemistry And Synthetic Polymers

View Answer

Question 15 Report

The oxidation state of chlorine in NaClO\(_3\) is?

+1

+3

+5

+6

Answer Details

The oxidation state of an element in a compound is the charge that the element would have if all the bonds in the compound were completely ionic. In NaClO\(_3\), the oxidation state of Na is +1 and the oxidation state of O is -2. Since the compound is neutral, the sum of the oxidation states of all the atoms in the compound must be zero. To find the oxidation state of Cl, we can use the equation: (+1) + x + 3(-2) = 0 where x is the oxidation state of Cl. Simplifying the equation gives: x - 5 = 0 x = +5 Therefore, the oxidation state of chlorine in NaClO\(_3\) is +5.

Read lesson note on Oxidation And Reduction (JAMB)

Oxidation And Reduction

View Answer

Question 16 Report

The bond between NH\(_3\) and H\(^+\) in NH4\(^+\) is?

dative

covalent

hydrogen

electrovalent

Chemical Bonds (Nigeria Only)

View Answer

Question 17 Report

Which of the following substances is an example of a fine chemical?

Sodium hydroxide

Hydrochloric acid

Ethylene

Ammonia

Answer Details

Out of the given options, "Ethylene" is an example of a fine chemical. Fine chemicals are pure chemical substances that are produced in relatively small quantities and with high purity for use in various industrial and scientific applications, such as pharmaceuticals, agrochemicals, and specialty chemicals. Ethylene is an important fine chemical that is widely used in the production of plastics, fibers, and other chemical intermediates. It is also used as a ripening agent for fruits and vegetables and as a fuel in rocket engines. Unlike sodium hydroxide and hydrochloric acid, which are bulk chemicals produced in large quantities for general industrial use, ethylene is a specialty chemical that requires specialized equipment and processes for its production and purification. Ammonia, on the other hand, is a bulk chemical used mainly in fertilizers and other agricultural applications.

Read lesson note on Periodic Chemistry (Ghana Only) (WAEC)

Periodic Chemistry (Ghana Only)

View Answer

Question 18 Report

The initial volume and pressure of a given mass of gas is V and 3.P. What is its pressure if its volume is increased to 2V at constant temperature?

3 P

2P

\(frac{3}{2}\) P

\(frac{2}{3}\) P

Answer Details

The pressure of the gas will decrease to \(frac{3}{2}\) P when its volume is increased to 2V at constant temperature. This can be explained using Boyle's law, which states that the pressure of a gas is inversely proportional to its volume, when temperature is held constant. In other words, as the volume of a gas increases, its pressure will decrease proportionally and vice versa. Given that the initial volume and pressure of the gas are V and 3.P, respectively, we can write: P1V1 = P2V2 where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume. Substituting the given values, we get: (3.P) V = P2 (2V) Simplifying this equation, we get: P2 = (3.P) V / (2V) P2 = \(frac{3}{2}\) P Therefore, the pressure of the gas will decrease to \(frac{3}{2}\) P when its volume is increased to 2V at constant temperature.

View Answer

Question 19 Report

The following molecules have double covalent bonds between two atoms except?

oxygen

carbon (IV)oxide

ethene

water

Answer Details

All of the molecules listed have at least one double covalent bond between two atoms except for water. A covalent bond is a type of chemical bond where atoms share electrons to achieve a stable configuration. A double covalent bond occurs when two pairs of electrons are shared between two atoms. Oxygen has a double covalent bond between two oxygen atoms (O=O). Carbon (IV) oxide, also known as carbon dioxide, has a double covalent bond between one carbon atom and two oxygen atoms (O=C=O). Ethene, also known as ethylene, has a double covalent bond between two carbon atoms (C=C). Water, on the other hand, has two single covalent bonds between one oxygen atom and two hydrogen atoms (H-O-H). It does not have any double covalent bonds. In summary, all the listed molecules have double covalent bonds between two atoms except for water, which has only single covalent bonds.

Read lesson note on Chemical Bonds (Ghana Only) (WAEC)

Chemical Bonds (Ghana Only)

View Answer

Question 20 Report

Calcium chloride is an ionic compound. Which of the following statements account for its ionic character?

I. Calcium has high ionization energy. II. Calcium has low ionization energy. III. Chlorine has high electron affinity. IV. Chlorine has high Ionization energy.

I and Il only

I, II and IV only

II, IIl and IV only

I, II, III and IV

Chemical Combination

View Answer

Question 21 Report

. If 20 cm\(^3\) of sodium hydroxide was neutralized by 20 cm\(^3\) of 0.01 mol dm3 tetraoxosulphate(VI) acid, what is the concentration of the solution?

0.010

0.020

0.100

0.150

View Answer

Question 22 Report

Which of the following statements about the solubility of a salt is correct?

A salt whose solubility increases with temperature would not crystallize easily on cooling

A salt whose solubility is independent of temperature would normally crystallize out on cooling

Crystallization would be efficient in separating out a salt whose solubility increases considerably with temperature

Solubility of a solid does not affect its crystallization

Solubility

View Answer

Question 23 Report

How many electrons does \({31}_{15}\)P\(^3-\) contain?

12

15

16

18

Answer Details

To determine the number of electrons in \({31}_{15}\)P\(^{3-}\), we need to first understand the notation. The atomic symbol \({31}_{15}\)P represents an atom of phosphorus with an atomic number of 15, which means it has 15 protons in its nucleus. The superscript 3- indicates that the atom has gained 3 electrons, giving it a net charge of -3. When an atom gains electrons, its number of electrons increases by the same number as the magnitude of the charge. Therefore, to determine the number of electrons in \({31}_{15}\)P\(^{3-}\), we can subtract the charge (-3) from the number of protons (15): Number of electrons = Number of protons - Charge Number of electrons = 15 - (-3) = 18 So \({31}_{15}\)P\(^{3-}\) contains 18 electrons. Therefore, the answer to this question is 18.

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 24 Report

The metallic bond in magnesium is stronger than that in calcium because magnesium has a

larger atomic size.

smaller atomic size

greater number of valence electrons

lower melting point

Answer Details

The metallic bond is a type of chemical bond that occurs between metal atoms. It arises due to the electrostatic attraction between the positively charged metal ions and the delocalized electrons surrounding them. The strength of the metallic bond depends on various factors, including the size of the metal atom and the number of valence electrons it has. In this case, the correct option is "smaller atomic size." Magnesium has a smaller atomic size than calcium, which means that the distance between the metal ions in magnesium is smaller than that in calcium. The closer the metal ions are to each other, the stronger the metallic bond will be. This is because the attraction between the positively charged metal ions and the negatively charged delocalized electrons is stronger when the ions are closer together. Therefore, since magnesium has a smaller atomic size than calcium, the metallic bond in magnesium is stronger than that in calcium. It is important to note that the option "greater number of valence electrons" is not correct in this case. Although the number of valence electrons can also affect the strength of the metallic bond, it is not the main factor that determines the difference in the strength of the metallic bond between magnesium and calcium.

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 25 Report

Which of the following pairs of elements has the greatest difference in electronegativity?

Na and F

Na and CI

Na and Br

Na and I

Answer Details

The pair of elements that has the greatest difference in electronegativity is Na and F. Electronegativity is the ability of an atom to attract electrons towards itself in a chemical bond. Fluorine (F) is the most electronegative element in the periodic table, meaning it has the strongest ability to attract electrons. Sodium (Na) is a metal and has a low electronegativity. When sodium and fluorine combine to form an ionic compound, such as NaF, fluorine gains an electron from sodium to form an anion with a negative charge, while sodium becomes a cation with a positive charge. The electronegativity difference between sodium and fluorine is the largest among the options given, making it the pair with the strongest ionic bond. Therefore, Na and F have the greatest difference in electronegativity.

Read lesson note on Oxidation And Reduction (JAMB)

Oxidation And Reduction

View Answer

Question 26 Report

Which of the following arrangement of elements is in decreasing order of electronegativity?

Na, Mg, Al, Si, P

Na, A1, Mg, P, Si

P, Mg, Na, Si, Al

P, Si, Al, Mg, Na

Answer Details

Electronegativity is a measure of the ability of an atom to attract electrons towards itself when it forms a chemical bond with another atom. The electronegativity of an element increases as we move from left to right across a period and from bottom to top in a group in the periodic table. Therefore, in the given options, the element with the highest electronegativity should come last, and the element with the lowest electronegativity should come first in the decreasing order. Out of the given options, the correct arrangement of elements in decreasing order of electronegativity is "P, Si, Al, Mg, Na." Phosphorus (P) has the highest electronegativity among the given elements, followed by silicon (Si), aluminum (Al), magnesium (Mg), and sodium (Na), which has the lowest electronegativity. Hence, the correct answer is option "P, Si, Al, Mg, Na."

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 27 Report

Which of the following standard conditions is not correct about energy changes?

Standard temperature is 298K

B. Standard pressure is 1 atm

Concentration of solution must be 1 mol/dm\(^3\)

ΔH at 298 K is the activation energy

View Answer

Question 28 Report

The atomic number of an atom would be equal to its mass number if it

has a totally filled valence shell

has a high charge to mass ratio

does not contain neutrons

exhibits isotopy

Answer Details

The atomic number of an atom is defined as the number of protons in the nucleus of the atom. The mass number of an atom, on the other hand, is the sum of the number of protons and neutrons in the nucleus of the atom. Therefore, the atomic number and mass number of an atom would only be equal if the atom does not contain any neutrons. This is because the mass number of an atom is determined by the number of protons and neutrons in its nucleus, while the atomic number is determined only by the number of protons. If an atom does not contain any neutrons, then its mass number would be equal to the number of protons (i.e., the atomic number). However, most naturally occurring elements have isotopes, which means that they have varying numbers of neutrons in their nuclei. This results in different mass numbers for the same element, while the atomic number remains constant. Therefore, the correct answer is: "the atomic number of an atom would be equal to its mass number if it does not contain neutrons".

Read lesson note on Structure Of The Atom (Ghana Only) (WAEC)

Read lesson note on Atomic Structure And Bonding (JAMB)

Structure Of The Atom (Ghana Only)

View Answer

Question 29 Report

Which of the following processes is not exhibited by atoms in order to attain more stable electron configuration?

Gaining of electrons

Hybridization of orbitals

Losing electrons

Sharing electron

Answer Details

The process that is not exhibited by atoms in order to attain more stable electron configuration is hybridization of orbitals. Atoms can become more stable by gaining or losing electrons to attain a full valence shell, which is the electron configuration of a noble gas. This process is called electron transfer. On the other hand, hybridization of orbitals refers to the mixing of atomic orbitals to form new hybrid orbitals. This process is not directly related to stability in terms of electron configuration, but it may be necessary for atoms to form certain chemical bonds. So, the answer is hybridization of orbitals is not exhibited by atoms in order to attain more stable electron configuration.

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 30 Report

Which of the following metals does not react with water to produce hydrogen?

Copper

Potassium

Sodium

Zinc

Answer Details

The reactivity of a metal with water depends on its position in the reactivity series. The reactivity series is a list of metals arranged in order of their ability to displace hydrogen from water and acids. The reactivity of metals with water increases from copper to zinc to sodium and potassium. Copper is the least reactive metal in the list, and it does not react with water to produce hydrogen. When a metal reacts with water, it forms a metal hydroxide and hydrogen gas. The more reactive the metal, the more vigorously it reacts with water to produce hydrogen. Sodium and potassium are the most reactive metals, and they react violently with water to produce hydrogen gas. Therefore, the metal that does not react with water to produce hydrogen is copper.

Read lesson note on Metals And Their Compounds (JAMB)

Metals And Their Compounds

View Answer

Question 31 Report

What quantity of electrons is lost when one mole of iron (II) ions is oxidized to iron (III) ?

0 mole

I mole

2 moles

3 moles

Oxidation And Reduction

View Answer

Question 32 Report

Which of the following reactions are always exothermic? 1. Neutralization Il. Decomposition III. Combustion

I and II only

I and III only

II and IIl only

I, II and III

Answer Details

Neutralization, decomposition, and combustion reactions can all be exothermic, but they don't have to be. An exothermic reaction is one that releases energy in the form of heat. Neutralization reactions occur when an acid and a base react to form a salt and water. Some neutralization reactions can be exothermic because energy is released when the acid and base molecules come together to form a salt and water. Decomposition reactions occur when a compound breaks down into its constituent elements. These reactions can be either endothermic or exothermic, depending on whether energy is absorbed or released during the reaction. Combustion reactions involve a fuel and an oxidizer reacting to form water and carbon dioxide, and these reactions are almost always exothermic because they release energy in the form of heat and light. Therefore, options (I and III only) are correct because neutralization and combustion reactions are usually exothermic. However, option (II) could be endothermic or exothermic, so it cannot be a correct answer. Option (I, II, and III) is also incorrect because option II could be endothermic.

Read lesson note on Energy Changes (JAMB)

Energy Changes

View Answer

Question 33 Report

Consider the reaction represented by the following equation:

AgNO\(_3\) + NaCl → AgCl + NaNO\(_3\).

The steps that could be taken to obtain pure dry sample of AgCI (s) from the mixture includes

heating to saturation and drying

filtering and evaporation to dryness

filtering, washing and drying

crystallizing and allowing to cool

Answer Details

The steps to obtain a pure dry sample of AgCl (s) from the mixture include filtering, washing, and drying. In this reaction, AgNO\(_3\) reacts with NaCl to form AgCl, which precipitates out of solution as a solid. To obtain a pure sample of AgCl, it is necessary to separate the solid from any residual reactants or products in the mixture. Filtering can be used to remove the solid AgCl from the mixture. Washing with water can help to remove any residual salt from the surface of the AgCl particles. Finally, drying the solid can help to remove any remaining water, leaving a pure sample of AgCl. So, the answer is filtering, washing, and drying are the steps that can be taken to obtain a pure dry sample of AgCl (s) from the mixture.

Read lesson note on Chemistry, Industry And The Environment (WAEC)

Read lesson note on Acids, Bases And Salts (Ghana Only) (WAEC)

Chemistry, Industry And The Environment

Acids, Bases And Salts (Ghana Only)

View Answer

Question 34 Report

Which of the following oxides has a giant covalent structure?

Al\(_2\)O\(_3\)

Na\(_2\)O

P\(_4\)O\(_10\)

SiO\(_2\)

Answer Details

The oxide with a giant covalent structure is silicon dioxide (SiO\(_2\)). A giant covalent structure means that each atom in the structure is bonded to neighboring atoms by strong covalent bonds. In the case of SiO\(_2\), each silicon atom is covalently bonded to four oxygen atoms, and each oxygen atom is covalently bonded to two silicon atoms. This creates a 3D network of alternating silicon and oxygen atoms that extends in all directions, forming a giant covalent structure. In contrast, the other oxides listed (Al\(_2\)O\(_3\), Na\(_2\)O, and P\(_4\)O\(_{10}\)) do not have a giant covalent structure. Al\(_2\)O\(_3\) and Na\(_2\)O have ionic structures, where the metal and non-metal atoms are bonded by strong ionic bonds. P\(_4\)O\(_{10}\) has a molecular structure, where the phosphorus and oxygen atoms are bonded by covalent bonds to form discrete P\(_4\)O\(_{10}\) molecules. Overall, the different types of bonding in these oxides result in their varying structures and properties.

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 35 Report

which of the following quantities is a molar quantity?

Molarity

Molar mass

Mass concentration

Molality

Answer Details

A molar quantity is a quantity that is related to the number of moles of a substance. A mole is the amount of a substance that contains the same number of entities as there are in 12 grams of carbon-12. Out of the options given, both "Molarity" and "Molar mass" are molar quantities. Molarity is the concentration of a solution, expressed as the number of moles of solute per liter of solution. It is a measure of the amount of solute present in a given volume of solution. Molar mass is the mass of one mole of a substance and is typically expressed in grams per mole (g/mol). It is the sum of the atomic masses of all the atoms in a molecule of the substance. On the other hand, "Mass concentration" and "Molality" are not molar quantities. Mass concentration is the concentration of a solution, expressed as the mass of solute per unit volume of solution. Molality is the concentration of a solution, expressed as the number of moles of solute per kilogram of solvent.

Read lesson note on Stoichiometry And Chemical Reactions (WAEC)

View Answer

Question 36 Report

An alkanol containing 60% carbon by mass would have a molecular formula [H=1.0. C-12.0, O= 16.0]

CH\(_3\)OH

C\(_2\)H\(_5\)OH

C\(_3\)H\(_7\)OH

C\(_4\)H\(_9\)OH

Chemistry, Industry And The Environment

View Answer

Question 37 Report

Which of the following compounds has the lowest boiling point?

C\(_4\)H\(_10\)

CH\(_3\)COOH

H\(_2\)O

C\(_2\)H\(_5\)OH

Answer Details

The compound with the lowest boiling point is C\(_4\)H\(_10\). Boiling point is the temperature at which a liquid changes into a gas. The strength of the intermolecular forces between the particles of a substance determines its boiling point. In general, compounds with weaker intermolecular forces have lower boiling points. C\(_4\)H\(_10\) is a simple alkane with weak van der Waals forces between its molecules. CH\(_3\)COOH is a carboxylic acid and has stronger hydrogen bonding between its molecules compared to C\(_4\)H\(_10\). H\(_2\)O has extremely strong hydrogen bonding between its molecules, making it have an even higher boiling point compared to CH\(_3\)COOH. C\(_2\)H\(_5\)OH is an alcohol and also has hydrogen bonding between its molecules, but weaker than H\(_2\)O. Therefore, C\(_4\)H\(_10\) has the lowest boiling point among the given compounds due to its weak intermolecular forces.

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

View Answer

Question 38 Report

Which of the following substances is not a reducing agent?

C

CO

O\(_2\)

H\(_2\)

Answer Details

A reducing agent is a substance that donates electrons to another substance in a chemical reaction. In other words, a reducing agent is oxidized (loses electrons) while another substance is reduced (gains electrons). Of the substances listed, the one that is not a reducing agent is O\(_2\). This is because oxygen is an oxidizing agent, meaning that it accepts electrons from another substance during a reaction. It does not donate electrons, so it cannot act as a reducing agent.

Read lesson note on Oxidation And Reduction (JAMB)

Oxidation And Reduction

View Answer

Question 39 Report

Which of the following solids would not decompose on heating?

Ammonium chloride

Lead (i) trioxonitrate (V)

Potassium trioxocarbonate (IV)

Sodium hydrogen trioxocarbonate (IV)

Acids, Bases And Salts

View Answer

Question 40 Report

What is the mass of silver deposited when 24,125 C of electricity is passed through a solution or silver salt.

[Ag = 108, IF = 96,500 C ]

432g

108g

54g

27g

Answer Details

The mass of silver deposited can be calculated using the equation: mass = (current x time x atomic weight of silver) / (ionic charge x Faraday constant) In this case, the current is not given, but we are given the total charge passed through the solution, which is 24,125 C. We can assume that this charge was passed at a constant current over a certain amount of time. Therefore, we can rearrange the equation to solve for the current: current = (ionic charge x Faraday constant x mass) / (time x atomic weight of silver) The ionic charge for silver is +1, the Faraday constant is 96,500 C, and the atomic weight of silver is 108 g/mol. Substituting these values into the equation, we get: current = (1 x 96,500 x mass) / (time x 108) We don't know the time, so we can't solve for the current. However, we can use the fact that the current is constant to say that the total charge passed is equal to the current multiplied by the time: charge = current x time Substituting the expression for current into this equation, we get: charge = ((1 x 96,500 x mass) / (time x 108)) x time Simplifying, we get: charge = (96,500 x mass) / 108 Multiplying both sides by 108 and dividing by 96,500, we get: mass = (charge x atomic weight of silver) / 96,500 Substituting the values given in the question, we get: mass = (24,125 x 108) / 96,500 mass = 27 g Therefore, the mass of silver deposited is 27 g

Read lesson note on Electrolysis (JAMB)

Electrolysis

View Answer

Question 41 Report

An example of a biodegradable pollutant is?

plastic

sewage

carbon (II) oxide

hydrogen sulphide

Answer Details

One example of a biodegradable pollutant is sewage. Sewage is the wastewater that contains human and household wastes, such as food scraps, soap, and other organic matter. Biodegradable means that the pollutant can be broken down or decomposed by natural processes, such as by bacteria and other microorganisms. In the case of sewage, bacteria in the environment can break down the organic matter and convert it into simpler, less harmful substances like water, carbon dioxide, and other minerals. These natural processes help to reduce the negative impact of sewage on the environment and make it less harmful to living organisms. However, it is important to note that even biodegradable pollutants like sewage can cause harm to the environment and human health if they are not properly treated or disposed of.

Read lesson note on Environmental Pollution (JAMB)

Environmental Pollution

View Answer

Question 42 Report

When 250 cm3 of a saturated solution of CuSO\(_4\) at 30°C was evaporated to dryness, 5.0 g of the salt was obtained..

What is the solubility of the salt at 30°C? [CuSO\(_4\) = 160]

0.031

0.125

0.640

1.560

Answer Details

The solubility of a salt is the maximum amount of the salt that can dissolve in a given amount of solvent at a particular temperature. In this question, we are given that 250 cm\(^3\) of a saturated solution of CuSO\(_4\) at 30°C was evaporated to dryness to obtain 5.0 g of the salt. Since the solution was saturated, all of the CuSO\(_4\) that could dissolve at 30°C was already dissolved in the solution. Therefore, the mass of CuSO\(_4\) obtained from evaporating the solution represents the maximum amount of CuSO\(_4\) that can dissolve in 250 cm\(^3\) of water at 30°C. To find the solubility of CuSO\(_4\) at 30°C, we can use the equation: Solubility = Maximum amount of solute / Volume of solvent The maximum amount of CuSO\(_4\) that can dissolve in 250 cm\(^3\) of water at 30°C is 5.0 g. The volume of solvent is 250 cm\(^3\), or 0.250 L. The molar mass of CuSO\(_4\) is 159.6 g/mol. Therefore, the solubility of CuSO\(_4\) at 30°C is: Solubility = Maximum amount of solute / Volume of solvent = 5.0 g / 0.250 L = 20 g/L To convert the solubility to g/100 mL, we can multiply by 10: Solubility = 20 g/L x 10 = 200 g/100 mL To find the solubility in g/100 mL, we also need to divide by the molar mass of CuSO\(_4\): Solubility = 200 g/100 mL / 159.6 g/mol = 1.253 mol/L Therefore, the solubility of CuSO\(_4\) at 30°C is 1.253 g/100 mL, which is approximately equal to 1.25 g/100 mL. The correct option is 0.125.

Read lesson note on Solubility (JAMB)

Solubility

View Answer

Question 43 Report

How many moles of H\(_2\)SO4 are there in 50 cm\(^3\) of 0.108 mol dm\(^3\) solution of the acid?

5.4x 10

5.4x 10\(^-1\)

5.4 x 10\(^-2\)

5.4 x 10\(^-3\)

View Answer

Question 44 Report

A balanced chemical equation is based on the law of?

Periodicity

Constant composition

Multiple proportion

Conservation of mass

Answer Details

The balanced chemical equation is based on the Law of Conservation of Mass. This law states that matter cannot be created or destroyed, but it can change form or be rearranged. In other words, the total mass of the reactants must equal the total mass of the products in a chemical reaction. A balanced chemical equation ensures that the Law of Conservation of Mass is being followed. It means that the same number of atoms of each element is present on both sides of the equation, and the total mass of the reactants is equal to the total mass of the products. For example, consider the equation for the reaction between hydrogen and oxygen to form water: 2H2 + O2 → 2H2O In this equation, there are four hydrogen atoms and two oxygen atoms on the left side of the equation, and the same number of atoms on the right side of the equation. Therefore, this equation is balanced and satisfies the Law of Conservation of Mass. In summary, a balanced chemical equation is based on the Law of Conservation of Mass, which states that the total mass of the reactants must be equal to the total mass of the products in a chemical reaction.

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

Read lesson note on Stoichiometry And Chemical Reactions (WAEC)

View Answer

Question 45 Report

Which of the following statements is correet for a reaction at equilibrium?

All reactions cease to occur

The eaction has gone to completion

The rates of the forward and backward reactions are equal

The amount of product equals the amount of reactants

Answer Details

The correct statement for a reaction at equilibrium is that the rates of the forward and backward reactions are equal. This means that the reaction is still occurring, but at an equal rate in both the forward and backward directions. Equilibrium is a dynamic state in which the forward and backward reactions are still occurring, but at the same rate. This means that the concentrations of the reactants and products remain constant over time. At equilibrium, the reaction has not gone to completion and the amount of product may not necessarily equal the amount of reactants. It's important to note that equilibrium is a state of balance and not necessarily a state of rest. The reaction is still occurring, but the concentrations of the reactants and products remain constant because the rates of the forward and backward reactions are equal.

Read lesson note on Chemical Equilibria (JAMB)

Chemical Equilibria

View Answer

Question 46 Report

A factor that is considered most important when siting a chemical industry is?

nearness to other industrial establishments

nearness to raw materials

favourable climate conditions

availability of storage facilities

Answer Details

When siting a chemical industry, one of the most important factors to consider is the nearness to raw materials. This is because raw materials are the foundation of the industry, and having easy access to them can reduce transportation costs and ensure a reliable supply chain. Chemical industries require large amounts of raw materials to produce their products, and these materials are often heavy and bulky. Therefore, being situated close to the source of these materials can significantly reduce transportation costs and also ensure that the industry has a reliable supply of materials. In addition to reducing transportation costs and ensuring a reliable supply chain, siting a chemical industry near raw materials can also reduce the environmental impact of the industry. Transporting large amounts of raw materials over long distances can contribute to greenhouse gas emissions and other forms of pollution, which can be minimized by siting the industry near the raw materials. Therefore, the correct answer is nearness to raw materials.

Read lesson note on Chemistry And Industry (JAMB)

Chemistry And Industry

View Answer

Question 47 Report

Equal masses of calcium trioxocarbonate(iv) were added to dilute hydrochloric acid at the temperature specified. Under which of the following conditions would the reaction be slowest?

Calcium trioxocarbonate ( iv ) chips a 20°C

CalcIum trioxocarbonate (IV) chips at 40°C

Calcium trioxocarbonate (IV) powder at 20'C

Calcium trioxocarbonate (IV) powder at 40'C

Answer Details

The rate of a chemical reaction generally increases with temperature. Therefore, the reaction would be slowest at the lowest temperature, which is: calcium trioxocarbonate (IV) chips at 20°C. When calcium trioxocarbonate (IV) reacts with hydrochloric acid, it produces calcium chloride, water, and carbon dioxide gas. The reaction rate depends on the frequency of collisions between the reactant particles. At a lower temperature, the particles move more slowly and collide less frequently, which reduces the reaction rate. Calcium trioxocarbonate (IV) chips will react slower than calcium trioxocarbonate (IV) powder because the chips have less surface area available for the reaction to occur. Powder has a larger surface area, allowing for more collisions to occur between the reactant particles and increasing the reaction rate. Therefore, the slowest reaction would occur when calcium trioxocarbonate (IV) chips are added to dilute hydrochloric acid at 20°C.

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

View Answer

Question 48 Report

f 5.0 cm\(^-3\) of 0.200 mol dm(^-3\) Na\(_2\)CO\(_3\) was diluted to 250cm(^-3\) solution, what would be the concentration of the resulting solution?

0.004 mol dm(^-3\)

0.020 mol dm(^-3\)

0.200 mol dm(^-3\)

0.400 mol dm(^-3\)

Answer Details

To find the concentration of the resulting solution after dilution, we need to calculate the amount of solute (Na_2CO_3) in the new solution. The concentration of a solution is given by the amount of solute per unit volume of the solution. The dilution formula is: C1 * V1 = C2 * V2 Where C1 is the initial concentration (0.200 mol dm^-3), V1 is the initial volume (5.0 cm^-3), C2 is the final concentration (what we are trying to find), and V2 is the final volume (250 cm^-3). Plugging in the values: 0.200 * 5.0 = C2 * 250 0.200 * 5.0 / 250 = C2 C2 = 0.004 mol dm^-3 So, the concentration of the resulting solution is 0.004 mol dm^-3.

Read lesson note on Stoichiometry And Chemical Reactions (WAEC)