WAEC SSCE - Physics - 2019 (Objective)
Question 1 Report
Which of the following waves is not mechanical?
Answer Details
The main idea of this question is to identify a type of wave that is not mechanical. Mechanical waves require a medium to travel through, such as a solid, liquid or gas. Sound waves and water waves are examples of mechanical waves. On the other hand, radio waves are a type of electromagnetic wave and do not require a medium to travel through. Therefore, the answer to the question is "Radio waves."
Question 2 Report
Which of the following graphs of a charge Q against potential difference V across the capacitor is correct?
Answer Details
Question 3 Report
The diagram above illustrates a meter bridge circuit under balanced condition. Determine the value of x.
Answer Details
Question 4 Report
When ultraviolet light is incident on certain metallic p articles are emitted. These particles are called
Answer Details
Question 5 Report
A rectangular piece of iron measuring 4 cm by 3 cm at 20\(^o\)C is heated until its temperature increases by 100 C. Calculate the new area of the metal. [Linear expansivity of iron is 1.2x 10\(^{-5}\) K\(^{-1}\)]
Answer Details
The change in the area of a rectangular piece of iron due to an increase in temperature can be calculated using the formula for linear expansion: ΔL = α * L * ΔT Where ΔL is the change in length, α is the linear expansivity, L is the original length, and ΔT is the change in temperature. The new length of the iron can be calculated by adding the change in length to the original length: L' = L + ΔL The new area of the iron can be calculated by using the new length and width: A' = L' * W First, the change in length of the iron can be calculated for both the length and the width: ΔL = α * L * ΔT = 1.2 x 10^-5 K^-1 * 4 cm * 100°C = 4.8 x 10^-3 cm L' = L + ΔL = 4 cm + 4.8 x 10^-3 cm = 4.0048 cm ΔL = α * L * ΔT = 1.2 x 10^-5 K^-1 * 3 cm * 100°C = 3.6 x 10^-3 cm W' = W + ΔL = 3 cm + 3.6 x 10^-3 cm = 3.0036 cm The new area of the iron can be calculated using the new length and width: A' = L' * W' = 4.0048 cm * 3.0036 cm = 12.0288 cm^2 Therefore, the new area of the metal after a temperature increase of 100°C is 12.0288 cm^2.
Question 6 Report
Calculate the quantity of heat needed to change the temperature of 60g of ice at 0 °C to 80 °C. [specific latent heat of fusion of ice= 3.36 x 10\(^5\) Jkg\(^{-1}\) specific heat capacity of water 4.2 x 10\(^3\) J kg\(^{-1}\) K\(^{-1}\)]
Answer Details
The heat needed to change the temperature of 60g of ice at 0°C to 80°C can be calculated using the equation for heat transfer: Q = m * c * ΔT Where Q is the heat transferred, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature. First, the heat needed to melt the ice can be calculated using the specific latent heat of fusion: Qfusion = m * Lf Where Lf is the specific latent heat of fusion. Qfusion = 60g * 3.36 x 10^5 J/kg = 2.016 x 10^5 J Next, the heat needed to raise the temperature of the water from 0°C to 80°C can be calculated using the specific heat capacity of water: Qheat = m * c * ΔT Qheat = 60g * 4.2 x 10^3 J/kg/K * 80°C = 2.016 x 10^5 J The total heat needed to change the temperature of the ice to 80°C is the sum of the heat needed to melt the ice and the heat needed to raise the temperature of the water: Q = Qfusion + Qheat = 2.016 x 10^5 J + 2.016 x 10^5 J = 4.032 x 10^5 J = 40.32 kJ Therefore, the quantity of heat needed to change the temperature of 60g of ice at 0°C to 80°C is 40.32 kJ.
Question 7 Report
An electron of mass 9.1 x 10\(^{-31}\) kg moves with a speed of 2.0 x 10\(^6\) ms\(^{-1}\) round the nucleus of an atom in a Circular path of radius 6.1 x 10(^{11}\) m. Determine the angular speed of the electron.
Answer Details
The angular speed of the electron can be determined using the formula: ω = v / r where ω is the angular speed, v is the velocity of the electron, and r is the radius of the circular path. Substituting the given values, we get: ω = (2.0 x 10^6 m/s) / (6.1 x 10^11 m) ω = 3.28 x 10^(-5) rad/s Therefore, the angular speed of the electron is 3.28 x 10^(-5) rad/s. Hence, the correct option is: 3.28 x 10^16 rad s^(-1)
Question 9 Report
Which of the following quantities is a vector?
Answer Details
Out of the given options, the quantity that is a vector is momentum. A vector quantity has both magnitude and direction. Momentum is the product of mass and velocity, and it has both magnitude and direction. On the other hand, volume, energy, and speed are scalar quantities that have only magnitude but no direction associated with them.
Question 10 Report
A device consumes 100 W of power when connected to a 120 V source. Calculate its resistance.
Answer Details
Question 11 Report
A small amount of air is introduced into the vacuum above the mercury in a mercury barometer tube. The mercury level goes down because the air molecules
Answer Details
Question 12 Report
An instrument used to measure relative humidity is the?
Answer Details
An instrument used to measure relative humidity is the hygrometer. Hygrometers measure the amount of water vapor present in the air, which is an indicator of the air's relative humidity. Hygrometers can be mechanical or electronic, and they may measure relative humidity directly or calculate it from measurements of temperature and dew point.
Question 13 Report
The induced current in a coil always flows in a direction so as to oppose the change that causes it. This statement is known as
Answer Details
Lenz's law states that the induced current in a coil always flows in a direction so as to oppose the change that causes it. For example, if there is a change in magnetic flux passing through a coil, it will induce an electromotive force (EMF) and a current will start flowing in the coil. This induced current will create a magnetic field that opposes the original change in magnetic flux. Lenz's law is a consequence of the law of conservation of energy and is a fundamental law in electromagnetism.
Question 14 Report
The anomalous expansion of water occurs in the range
Answer Details
The anomalous expansion of water refers to a phenomenon in which water expands instead of contracting as it cools below a certain temperature. This is a unique property of water, as most substances contract when they cool. The temperature range in which the anomalous expansion of water occurs is from 4°C to 0°C. As water cools below 4°C, it starts to contract, but as it approaches 0°C, it expands again. This means that at 0°C, water is actually less dense than it is at 4°C. Therefore, the answer is: 0°C to 4°C. This is the temperature range in which the anomalous expansion of water occurs.
Question 15 Report
A ray of light traveling from a rectangular glass block of refractive index 1.5 into air strikes the block at an angle of incidence of 30. Calculate its angle of refraction.
Answer Details
The angle of refraction of a ray of light traveling from one medium to another can be calculated using Snell's law. Snell's law states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the indices of refraction of the two media. Mathematically, this can be expressed as: sin θincidence / sin θrefraction = n1 / n2 Where θincidence is the angle of incidence, θrefraction is the angle of refraction, n1 is the index of refraction of the first medium, and n2 is the index of refraction of the second medium. Given the angle of incidence of 30° and the indices of refraction of 1.5 for the rectangular glass block and 1.0 for air, we can calculate the angle of refraction as follows: sin θincidence / sin θrefraction = n1 / n2 sin 30° / sin θrefraction = 1.5 / 1.0 sin θrefraction = sin 30° / 1.5 θrefraction = sin-1(sin 30° / 1.5) = 19.47° Therefore, the angle of refraction of the ray of light traveling from the rectangular glass block into air is approximately 19.47°.
Question 16 Report
If the efficiency of a transformer is 100%, which of the following equations would be correct?
Answer Details
Question 17 Report
A transverse pulse of frequency 9 Hz traves 4.5m in 0.6 s. Calculate the wavelength of the pulse.
Answer Details
The formula for the speed of a wave is given by: v = λf where v is the speed of the wave, λ is the wavelength, and f is the frequency. We are given the frequency of the pulse as 9 Hz and the time it takes to travel a distance of 4.5 m as 0.6 s. We can use these values to calculate the speed of the pulse as follows: v = d/t = 4.5 m/0.6 s = 7.5 m/s Now, we can use the formula v = λf to calculate the wavelength of the pulse: λ = v/f = 7.5 m/s / 9 Hz = 0.83 m Therefore, the wavelength of the pulse is 0.83 m. Answer option (C) is correct.
Question 18 Report
In the diagram above, the time taken to trace a wave between P and Q is
Answer Details
Question 19 Report
An a.c. the generator can be converted to a d.c. generator by replacing the
Answer Details
Question 20 Report
Which of the following characteristics of waves can a ripple tank be used to demonstrate?
I. Reflection
II. Refraction
III. Diffraction
Answer Details
A ripple tank is a scientific apparatus that can be used to demonstrate the behavior of waves. It produces waves on the surface of water that can be observed and studied. I. Reflection: When waves encounter a boundary or obstacle, they can bounce back or reflect. A ripple tank can be used to demonstrate reflection by placing a barrier in the path of the waves and observing how they bounce back. II. Refraction: Waves can also change direction or bend when they pass through a medium with a different density or refractive index. A ripple tank can demonstrate refraction by placing a block in the path of the waves and observing how they change direction as they pass through it. III. Diffraction: When waves encounter an obstacle with a small opening or gap, they can bend and spread out, creating a diffraction pattern. A ripple tank can demonstrate diffraction by creating waves with a single source and observing how they spread out as they pass through a gap or opening. Therefore, the correct answer is "I, II and III".
Question 21 Report
The nucleon and proton numbers of a neutral atom of an element are 238 and 92 respectively. Determine the number of neutrons in the atom.
Answer Details
The nucleon number of an atom is the total number of protons and neutrons in its nucleus, while the proton number is the number of protons. Therefore, to determine the number of neutrons in an atom, we can subtract the proton number from the nucleon number. In this case, the nucleon number is 238 and the proton number is 92. Number of neutrons = Nucleon number - Proton number Number of neutrons = 238 - 92 Number of neutrons = 146 Therefore, the answer is: 146 neutrons.
Question 22 Report
The diagram above represents an experimental set-up for verifying?
Question 23 Report
An electron of mass 9.1 x 10\(^{-31}\) kg moves with a speed of 2.0 x 10\(^6\) ms\(^{-1}\) round the nucleus of an atom in a Circular path of radius
6.1 x 10\(^{11}\) m. Calculate the centripetal force acting on the electron.
Answer Details
The centripetal force acting on an electron moving in a circular path around the nucleus of an atom is given by the equation: F = (mv\(^2\))/r Where F is the centripetal force, m is the mass of the electron, v is the velocity of the electron, and r is the radius of the circular path. Substituting the given values into the equation, we have: F = (9.1 x 10\(^{-31}\) kg) x (2.0 x 10\(^6\) ms\(^{-1}\))\(^2\) / (6.1 x 10\(^{11}\) m) F = 6.0 x 10\(^{-8}\) N Therefore, the correct answer is: 6.0 x 10\(^{-8}\) N.
Question 24 Report
Which of the following instruments can be used to compare the magnitudes of charges on two given bodies?
Answer Details
The instrument that can be used to compare the magnitudes of charges on two given bodies is the Gold-leaf electroscope. When a charged object is brought close to the electroscope, the charge is transferred to the metal leaves causing them to repel each other. By comparing the extent of separation of the leaves with a known charge, the magnitude of the charge on the given bodies can be determined. Electrophorus and ebonite rods are used for charging objects, and proof planes are used to transfer charge from one body to another.
Question 25 Report
Which of the following cases cannot produce total internal reflection? A light ray travelling from
Answer Details
Question 26 Report
Which property of a wave remains constant when the wave travels from one medium into another?
Question 27 Report
Which of the following statements about a neutral atom is correct? The
Answer Details
A neutral atom is an atom that has an equal number of protons and electrons. The protons are located in the nucleus of the atom, along with the neutrons, and the electrons occupy the space surrounding the nucleus. The number of protons in the nucleus of an atom determines the chemical element to which it belongs. A neutral atom has no overall charge, meaning that the positive charge of the protons is balanced by the negative charge of the electrons. Hence, the correct statement about a neutral atom is that the number of protons is equal to that of electrons.
Question 28 Report
Which of the following statements is the correct reason for using soft iron in making the armature or an electric bell?
Answer Details
Question 29 Report
Two bodies of masses 3.0 kg and 2.0 kg are separated by a distance of 50 cm. Calculate the force of attraction between them. [G = 6.67 x 10\(^{-11}\) Nm\(^2\) kg\(^2\)]
Answer Details
We can use the formula for gravitational force between two masses: F = (G x m1 x m2)/r^2 where F = force of attraction G = gravitational constant m1 and m2 = masses of the bodies r = distance between the centers of the two bodies Plugging in the given values, we get: F = (6.67 x 10^-11 Nm^2/kg^2) x (3.0 kg) x (2.0 kg) / (0.50 m)^2 F = 1.6 x 10^-9 N Therefore, the force of attraction between the two bodies is 1.6 x 10^-9 N. Answer: 1.6 x 10^-9 N
Question 30 Report
The vacuum in a thermoflask reduces heat loss resulting from
Answer Details
The vacuum in a thermoflask reduces heat loss resulting from conduction and convection by creating a space with no air molecules between the inner and outer layers of the flask, which minimizes heat transfer through these processes. Additionally, the reflective surfaces of the inner layer further minimize heat loss by reflecting any radiation back into the flask.
Question 32 Report
Which of the following thermometers is used to measure the temperature of the human body?
Answer Details
Question 33 Report
An 800 kg car moving at 80 km hr\(^{-1}\) collides with a 1200 kg car moving at 40 km hr\(^{-1}\) in the same direction. If the cars stick together, calculate their common velocity.
Answer Details
Question 34 Report
The mass of a load is doubled while the force acting on it is halved. The resulting acceleration of the load is
Answer Details
Question 35 Report
The area under a velocity-time graph represents
Answer Details
The area under a velocity-time graph represents the distance traveled by an object. Velocity is the rate of change of displacement with respect to time, which means it indicates how far an object has traveled in a specific amount of time. The area under the velocity-time graph shows the product of velocity and time, which is distance. To calculate the distance traveled, we need to find the area enclosed by the velocity-time graph, which may consist of different shapes depending on the motion of the object. For example, if the object is moving at a constant velocity, the area would be a rectangle. If the object is accelerating, the area would be a triangle or a trapezoid. Therefore, the correct answer is "distance".
Question 36 Report
Which of the following graphs gives the correct relationship between energy and mass when mass is converted to energy.
Answer Details
Question 37 Report
Which of the following properties is not exhibited by sound waves?
Answer Details
The property that is not exhibited by sound waves is polarization. Polarization is a property of transverse waves, which are waves that vibrate perpendicular to the direction of their motion. Sound waves, on the other hand, are longitudinal waves, which means that they vibrate parallel to the direction of their motion. Since sound waves are not transverse, they cannot exhibit polarization. Diffraction, interference, and reflection are all properties of sound waves. Diffraction is the bending of sound waves around obstacles or through openings. Interference occurs when two or more sound waves interact with each other, either constructively or destructively. Reflection is the bouncing back of sound waves when they hit a surface. In summary, sound waves are longitudinal waves and cannot exhibit polarization, but they can exhibit other properties such as diffraction, interference, and reflection.
Question 38 Report
A body of mass 2 kg is released from a point 100 m above the ground. Calculate its kinetic energy 80m from the point of release.
Answer Details
Question 39 Report
Which of the following materials does not serve as a safety device in electrical circuits?
Answer Details
Connecting wires, earth wires, and fuses serve as safety devices in electrical circuits, while switches are not safety devices but rather control devices that allow the flow of current to be turned on or off. Therefore, the correct answer is switch.
Question 40 Report
A freshly demagnetized bar magnet is placed in the East-West direction to ensure that
Answer Details
Placing a freshly demagnetized bar magnet in the East-West direction helps ensure that the molecular magnets within the magnet remain randomly arranged. This is because, in this position, the magnet is perpendicular to the Earth's magnetic field, which would otherwise affect the alignment of the molecular magnets. By keeping the molecular magnets in a random arrangement, the magnet can be effectively demagnetized and can be magnetized again in a desired direction.
Question 41 Report
The time rate of increase in velocity is called
Answer Details
The time rate of increase in velocity is called acceleration. Acceleration is a measure of how quickly an object changes its velocity, and it is calculated as the change in velocity per unit of time. Velocity is a vector quantity that describes an object's speed and direction of motion. If an object's velocity changes over time, either in magnitude (speed) or direction, it is said to be accelerating. The acceleration of an object is the rate at which its velocity changes, and it is a measure of the force acting on an object. Force is a vector quantity that describes the interaction between two objects that results in a change in motion. Force is proportional to acceleration, so a greater force will result in a greater acceleration. Momentum is a vector quantity that describes an object's mass and velocity. Momentum is conserved in an isolated system, meaning that the total momentum of the system remains constant, although the momentum of individual objects within the system may change. Speed is a scalar quantity that describes the magnitude of an object's velocity, without considering its direction. Speed is a measure of how quickly an object is moving, but it does not take into account changes in direction. Therefore, the time rate of increase in velocity is called acceleration.
Question 42 Report
A loaded spring is set in simple harmonic motion. The force that tends to restore the load to its equilibrium position is
Answer Details
Question 44 Report
The diagram above illustrates an object moving in a circular path at a constant speed. Which of the arrows indicates the direction of linear velocity?
Answer Details
Question 45 Report
In an elastic collision, momentum is conserved as well as well as?
Answer Details
In an elastic collision, both momentum and kinetic energy are conserved. Momentum is defined as the product of an object's mass and velocity, and it is a measure of an object's motion. In an elastic collision, the total momentum before the collision is equal to the total momentum after the collision. This means that the momentum of the objects involved in the collision is conserved. Kinetic energy is defined as the energy an object possesses due to its motion. In an elastic collision, the total kinetic energy before the collision is equal to the total kinetic energy after the collision. This means that the kinetic energy of the objects involved in the collision is conserved. In contrast, potential energy is a measure of an object's potential to do work, and it is related to an object's position or configuration. In an elastic collision, potential energy is not conserved because the objects change position or configuration during the collision. Therefore, in an elastic collision, momentum and kinetic energy are conserved, while potential energy is not conserved.
Question 46 Report
The wire of a platinum resistance thermometer has d resistance of 3.5\(\Omega\) at 0 °C and 10.52\(\Omega\) at 100°C. Calculate the temperature of the wire when its resistance is 7.5\(\Omega\).
Answer Details
The resistance (R) of a wire is proportional to the temperature (T) in degrees Celsius. The equation of the resistance-temperature relationship is given by: R = R0 (1 + αT) Where R0 is the resistance at 0°C, α is the temperature coefficient of resistance and T is the temperature in degrees Celsius. To solve this problem, we can use the resistance-temperature relationship to find α, and then use it to find the temperature at the given resistance. First, we need to find the value of α. We can use the two resistance values given to set up two equations: R1 = R0 (1 + αT1) R2 = R0 (1 + αT2) where R1 and R2 are the resistances at temperatures T1 and T2, respectively. Substituting the given values: 3.5 = R0 (1 + α(0)) 10.52 = R0 (1 + α(100)) Solving for R0: 3.5 = R0 1 + α(100) = 10.52/R0 Rearranging the second equation: α = (10.52/R0 - 1)/100 Substituting R0 = 3.5: α = (10.52/3.5 - 1)/100 = 0.0032/°C Now we can use the resistance-temperature relationship to find the temperature at the given resistance: R = R0 (1 + αT) 7.5 = 3.5 (1 + 0.0032T) Solving for T: T = (7.5/3.5 - 1)/0.0032 = 57°C Therefore, the temperature of the wire when its resistance is 7.5Ω is 57°C. The correct option is 57 \(^o\)C.
Question 47 Report
The graph above illustrates the variation of temperature \(\theta\) with time (t) for a solid that is being heated. Which processes take place at segments P and Q respectively?
Answer Details
The graph shows the change in temperature of a solid as it is heated over time. At segment P, the temperature remains constant despite the application of heat. This is because the energy is being used to break the bonds between the molecules in the solid, rather than increasing their kinetic energy and temperature. This process is called melting, which is the transition from solid to liquid phase. At segment Q, the temperature again remains constant, but this time at a higher level than at segment P. This is because the energy is being used to break the bonds between the molecules in the liquid, rather than increasing their kinetic energy and temperature. This process is called boiling, which is the transition from liquid to gas phase. Therefore, the correct answer is "Melting and boiling".
Question 48 Report
Which of the following statements about a moving object is correct?
Answer Details
The correct statement about a moving object is "At a steady velocity, the resultant force acting on it must be equal to zero." This means that when an object is moving at a constant speed in a straight line (i.e., at a steady velocity), the net force acting on it is zero. This does not mean that there are no forces acting on the object, but rather that the forces are balanced such that they cancel each other out. If the object were to accelerate or decelerate, there would be a net force acting on it. Similarly, air resistance can be a force acting on the object but it does not need to be zero for the object to move at a steady velocity, as long as it is balanced by other forces.
Question 49 Report
Which of the following devices is used for storing electric charges?
Answer Details
A capacitor is a device that is used for storing electric charges. It consists of two conductive plates separated by an insulating material called a dielectric. When a voltage is applied to the capacitor, electric charges are stored on the plates. The amount of charge that can be stored on a capacitor is proportional to the voltage applied and the capacitance of the capacitor, which is a measure of its ability to store electric charges. A transformer is a device that is used to change the voltage of an alternating current (AC) electrical supply. It works by using electromagnetic induction to transfer energy from one coil of wire to another. An ammeter is a device that is used to measure the current in an electrical circuit. It works by detecting the flow of electric charges through a conductor and measuring the resulting electric potential difference. A potentiometer is a device that is used to measure the potential difference (voltage) between two points in an electrical circuit. It works by comparing the voltage being measured to a reference voltage, and it can also be used to adjust the voltage in a circuit. Therefore, a capacitor is the device used for storing electric charges.
