JAMB UTME - Chemistry - 2014

Chemical Kinetics And Equilibrium System (Nigeria Only)

View Answer

Question 3 Report

Ethyne is passed through a hot tube containing organo-nickel catalyst to produce

isoprene

polythene

ethanol

benzene Correct answer

Answer Details

Passing ethyne (also known as acetylene) through a hot tube containing organo-nickel catalyst results in the production of benzene. This reaction is known as the "nickel carbide" or "cyclization" reaction. During the reaction, the ethyne molecules undergo a cyclization process in which the carbon atoms in the molecule bond together to form a ring. The organo-nickel catalyst helps to facilitate this process by providing a site for the carbon atoms to come together and form the ring. The reaction proceeds as follows: 2C2H2 → C6H6 In other words, two molecules of ethyne combine to form one molecule of benzene. Therefore, the correct answer is "benzene".

Read lesson note on Organic Compounds (JAMB)

Organic Compounds

View Answer

Question 4 Report

In the electrolytic extraction of cacium from calcium chloride, the cathode is

zinc

graphite

platinum

iron Correct answer

Answer Details

Read lesson note on Electrolysis (JAMB)

Read lesson note on Acids, Bases And Salts (JAMB)

Electrolysis

Acids, Bases And Salts

View Answer

Question 5 Report

The dispersion of a liquid in a liquid medium will give

an emulsion

Correct answer

a fog

a gel

an aerosol

Answer Details

When a liquid is dispersed in a liquid medium, it forms an emulsion. An emulsion is a type of mixture where small droplets of one liquid are suspended in another liquid. The two liquids are immiscible, which means they cannot dissolve in each other. In the case of an emulsion, one of the liquids is dispersed in the form of small droplets throughout the other liquid, forming a homogeneous mixture. This is different from a fog, which is a suspension of small liquid droplets in air, a gel, which is a solid or semi-solid material dispersed in a liquid, and an aerosol, which is a suspension of small solid or liquid particles in air.

Read lesson note on Solubility (JAMB)

Solubility

View Answer

Question 6 Report

What is the percentage of sulphur in sulphur (IV) oxide?

66%

25%

40%

50% Correct answer

Answer Details

Sulfur (IV) oxide, also known as sulfur dioxide (SO2), is composed of one sulfur atom and two oxygen atoms. To determine the percentage of sulfur in sulfur (IV) oxide, we need to calculate the molar mass of the compound and then determine the molar mass of the sulfur atom. The molar mass of SO2 can be calculated by adding the atomic masses of sulfur and two oxygen atoms: Sulfur: 32.07 g/mol Oxygen: 2 x 16.00 g/mol = 32.00 g/mol Molar mass of SO2 = 32.07 g/mol + 32.00 g/mol = 64.07 g/mol The molar mass of sulfur is 32.07 g/mol, which means that sulfur makes up 32.07 g of the total molar mass of 64.07 g/mol. To determine the percentage of sulfur in SO2, we can use the following formula: percentage of sulfur = (mass of sulfur / total mass of compound) x 100% Substituting the values we obtained: percentage of sulfur = (32.07 g/mol / 64.07 g/mol) x 100% percentage of sulfur = 50% Therefore, the answer is option D, which is 50%.

Read lesson note on Acids, Bases And Salts (JAMB)

Acids, Bases And Salts

View Answer

Question 7 Report

Polystyrene is widely used as packaging materials for fragile objects during transportation because of its

ligjtness

low density

high density

high compressibility Correct answer

Answer Details

Polystyrene is widely used as packaging materials for fragile objects during transportation because of its lightweight and low density. This means that it is easy to handle and does not add much weight to the package, making it more cost-effective to transport. Additionally, polystyrene has high compressibility, which means it can absorb impact and protect the fragile object inside the package from damage during transit.

Read lesson note on Basic Biochemistry And Synthetic Polymers (WAEC)

Basic Biochemistry And Synthetic Polymers

View Answer

Question 8 Report

In the diagram, the function of the concentrated H2SO4 is to

purify the gas

dry the gas Correct answer

liquefty the gas

remove odour

Answer Details

View Answer

Question 9 Report

The polymer used in making car rear lights is

perspex Correct answer

bakeelite

polystyrene

polyacrylonitrile

Answer Details

View Answer

Question 10 Report

If the difference in electronegativity of elements P and Q is 3.0. The bond that will be formed between them is

metallic

covalent

co-ordinate

ionic Correct answer

Answer Details

The difference in electronegativity between two elements determines the type of bond they will form. Electronegativity is the measure of an atom's ability to attract electrons towards itself in a covalent bond. If the difference in electronegativity between two elements is greater than 1.7, the bond between them is considered to be ionic. In an ionic bond, one atom will completely transfer its valence electrons to the other, resulting in the formation of ions with opposite charges that are held together by electrostatic forces. However, if the difference in electronegativity is less than 1.7, the bond between the elements is considered to be covalent. In a covalent bond, the atoms share valence electrons to fill their outermost energy levels. In the given question, the difference in electronegativity of elements P and Q is 3.0, which is greater than 1.7. Hence, the bond between them will be an ionic bond. Therefore, the answer is.

Read lesson note on Chemical Bonds (Nigeria Only) (WAEC)

Chemical Bonds (Nigeria Only)

View Answer

Question 11 Report

The alkanol obtained from the production of soap is

propanol

ethanol

glycerol Correct answer

methanol

Answer Details

The alkanol obtained from the production of soap is glycerol. Glycerol is a byproduct of the saponification reaction, which is the process of making soap from fats or oils. The reaction between fats or oils and an alkaline solution produces soap and glycerol as the byproduct.

Read lesson note on Periodic Chemistry (Ghana Only) (WAEC)

Periodic Chemistry (Ghana Only)

View Answer

Question 12 Report

A few drops of NaOH solution was added to an unknown salt forming a white precipitate which is insoluble in excess solution. The cation likely present is

Zn2+

Pb2+

Ca2+ Correct answer

Al3+

Answer Details

Read lesson note on Acids, Bases And Salts (JAMB)

Read lesson note on Non-metals And Their Compounds (JAMB)

Acids, Bases And Salts

Non-metals And Their Compounds

View Answer

Question 13 Report

A hydrocarbon has an empirical formula CH and a vapour density of 39. Determine its molecular formula.[C = 12, H = 1]

C2H6

C3H8

C3H4

C6H6 Correct answer

Answer Details

molecular mass = 2 x vapour density
= 2 x 39 = 79
∴ Cn Hn = 78
12n + 1n = 78
13n = 78
n =

\frac{78}{13}

= 6
∴ Cn Hn = C 6H 6

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

Read lesson note on Chemistry Of Carbon Compounds (Nigeria Only) (WAEC)

View Answer

Question 14 Report

H 2O (g) + C (s) → H2(g) + CO(g)The oxidizing agent in the reaction above is

CO(g)

C(s)

H2O(g) Correct answer

H(2)(g)

Answer Details

Read lesson note on Chemistry Of Carbon Compounds (Nigeria Only) (WAEC)

View Answer

Question 15 Report

A silicon -containing ore has 92% 28Si, 5% 29Si and 3% 30Si. Calculate the relative atomic mass of the silicon.

14.00

29.00

28.11 Correct answer

28.00

Answer Details

The relative atomic mass of silicon can be calculated as follows: Relative atomic mass of silicon = (92% * 28Si atomic mass) + (5% * 29Si atomic mass) + (3% * 30Si atomic mass) where the atomic masses of 28Si, 29Si, and 30Si are, respectively, 28, 29, and 30 atomic mass units (amu). So, the relative atomic mass of silicon = (92% * 28 amu) + (5% * 29 amu) + (3% * 30 amu) = (0.92 * 28 amu) + (0.05 * 29 amu) + (0.03 * 30 amu) = 25.76 + 1.45 + 0.9 = 28.11 amu Therefore, the relative atomic mass of silicon is 28.11 amu.

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 16 Report

Which of the following will shift to the left from dilute tetraoxosulphate (VI) acid?

Lead

Magnesium Correct answer

Cpper

Gold

Answer Details

Dilute tetraoxosulphate (VI) acid is also known as sulfuric acid (H2SO4). When an acid dissociates, it produces hydrogen ions (H+) and the corresponding anions. The extent to which the acid dissociates is dependent on its strength. Strong acids dissociate completely in solution, while weak acids only partially dissociate. In the given options, magnesium is the only metal that will shift to the left from dilute tetraoxosulphate (VI) acid. This is because magnesium is more reactive than hydrogen, and will displace hydrogen from the acid to form magnesium sulfate and hydrogen gas. This displacement reaction will shift the equilibrium position to the left, reducing the concentration of hydrogen ions and increasing the concentration of undissociated acid. The other metals listed - lead, copper, and gold - are less reactive than hydrogen and will not displace hydrogen from the acid. Therefore, their equilibrium position will remain unchanged and they will not shift to the left or the right.

Read lesson note on Acids, Bases And Salts (Ghana Only) (WAEC)

View Answer

Question 17 Report

The nitrogen obtained from air has a density higher than the one from nitrogen-containing compounds because the one from air is contaminated with

water vapour

oxgyen

rare gases Correct answer

carbon (IV) oxide

Answer Details

Read lesson note on Air (JAMB)

Air

View Answer

Question 18 Report

Due to the unstable nature of ethyne, it is stored by dissolving in

ethane-1,2-diol

propanol

ethanoic acid

propanone Correct answer

Answer Details

Read lesson note on Acids, Bases And Salts (Ghana Only) (WAEC)

View Answer

Question 19 Report

Z in diagram above represents

heat of reaction Correct answer

activation energy

free energy

entropy of reaction

Answer Details

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

Read lesson note on Chemical Kinetics And Equilibrium System (Nigeria Only) (WAEC)

Read lesson note on Energy And Energy Changes (WAEC)

Chemical Kinetics And Equilibrium System (Nigeria Only)

Energy And Energy Changes

View Answer

Question 20 Report

A gas X diffuses twice as fast as gas Y. if the relative molecular mass of X is 32, calculate the relative molecular mass of Y.

128 Correct answer

Answer Details

\frac{R Y}{R X}

\frac{\sqrt{M y}}{\sqrt{M y}}

1/2 =

\frac{\sqrt{32}}{\sqrt{y}}

\frac{32}{y}

= 1/4
Y =

\frac{32 x 4}{1}

= 128

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

View Answer

Question 21 Report

Fluorine does not occur in the free state in nature because

it is a poisonous gas

it belongs to the halogen family

it is inert

of its high reactivity Correct answer

Answer Details

Fluorine is a highly reactive element and readily reacts with other elements to form compounds. This high reactivity is why fluorine does not occur in the free state in nature. Instead, it is found in the earth's crust combined with other elements in compounds such as fluorite (calcium fluoride), cryolite (sodium aluminum fluoride), and fluorspar (calcium fluoride). The high reactivity of fluorine is due to its electron configuration, which makes it highly electronegative. This means that it has a strong tendency to attract electrons to itself, making it highly reactive and prone to forming chemical bonds with other elements. So, the reason fluorine does not occur in the free state in nature is due to its high reactivity, which corresponds to: of its high reactivity.

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 22 Report

Beryllium and aluminium have similar properties because they

are both metals

belong to the same group

belong to the same period

are positioned diagonally to each other Correct answer

Answer Details

Beryllium and aluminium have some similar properties because they both belong to the same group of elements in the periodic table, known as Group 3A. Elements in the same group tend to have similar chemical and physical properties because they have the same number of electrons in their outermost shell, also known as valence electrons. This means they have similar reactivity and can form similar chemical bonds with other elements. However, beryllium and aluminium are not positioned diagonally to each other in the periodic table, and they also do not belong to the same period. Beryllium is in period 2, while aluminium is in period 3. They are both metals, but this is not the main reason for their similar properties.

Read lesson note on Structure Of The Atom (WAEC)

Structure Of The Atom

View Answer

Question 23 Report

The gas that is removed by the water in the flask is

O 2

SO 2

HCI Correct answer

H 2

Answer Details

Read lesson note on Oxidation And Reduction (JAMB)

Oxidation And Reduction

View Answer

Question 24 Report

In the extraction of sodium from fused sodium chloride, the anode is made of platinum because

sodium is formed at the anode

chlorine is formed at the anode

sodium does not react with platinum Correct answer

chlorine does not react with platinum

Answer Details

The anode in the extraction of sodium from fused sodium chloride is made of platinum because sodium does not react with platinum. In this process, an electric current is passed through a molten mixture of sodium chloride to separate the sodium and chlorine ions. The anode attracts the negatively charged chloride ions, while the cathode attracts the positively charged sodium ions. The platinum anode does not react with the sodium ions, allowing for their separation from the chloride ions and the successful extraction of sodium.

Read lesson note on Chemical Combination (JAMB)

Chemical Combination

View Answer

Question 25 Report

Zn (s) + CuSO 4(aq) → ZnSO 4(aq) + Cu (s)

In the reaction above, the oxidation number of the reducing agent changes from

0 to + 4

0 to + 2 Correct answer

+ 1 to + 2

+ 1 to + 3

Answer Details

In the given chemical reaction, Zn is the reducing agent because it causes the reduction of Cu²⁺ to Cu. Reduction is a process where an atom or ion gains electrons. In this reaction, Zn loses electrons and gets oxidized to Zn²⁺. The oxidation number of an atom or ion is the charge it would have if all its bonds were completely ionic. Before the reaction, the oxidation state of Zn is 0 because it is in its elemental form. After the reaction, Zn is oxidized to Zn²⁺, which has an oxidation state of +2. Therefore, the oxidation number of the reducing agent (Zn) changes from 0 to +2. So, the correct answer to the question is "0 to +2".

Read lesson note on Oxidation And Reduction (JAMB)

Read lesson note on Redox Reactions (WAEC)

Oxidation And Reduction

Redox Reactions

View Answer

Question 26 Report

If the change in free energy of a system is -899 Jmol-1 and the entropy change is 10Jmol-1k-1 at 250C, calculate the enthalpy change.

+2081 Jmol-1 Correct answer

-2081 Jmol-1

-649 Jmol-1

+649 Jmol-1

Answer Details

The enthalpy change can be calculated using the formula: ΔG = ΔH - TΔS where ΔG is the change in free energy, ΔH is the change in enthalpy, ΔS is the change in entropy, and T is the temperature in Kelvin. Plugging in the values given: -899 Jmol-1 = ΔH - (250+273)K * 10Jmol-1K-1 Solving for ΔH: ΔH = -899 Jmol-1 + (523K * 10Jmol-1K-1) ΔH = -899 Jmol-1 + 5230 Jmol-1 ΔH = +4331 Jmol-1 Therefore, the enthalpy change is +4331 Jmol-1, which corresponds to +2081 Jmol-1.

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

View Answer

Question 27 Report

The major and most effective way of controlling pollution is to

improve machinery so that the substances released from combustion are less harmful

pass strict laws against it by individuals and companies

educate people on the causes and effects of pollution Correct answer

convert chemical wastes to harmless substances before releasing them into the environment

Answer Details

Read lesson note on Environmental Pollution (JAMB)

Environmental Pollution

View Answer

Question 28 Report

The process of converting starch to ethanol is

cracking

distillation

fermentation Correct answer

oxidation

Answer Details

The process of converting starch to ethanol is called "fermentation". Fermentation is a biological process that converts sugars, such as glucose, into ethanol and carbon dioxide. In the case of starch, it must first be hydrolyzed (broken down) into simpler sugars, like glucose, before it can be fermented. This hydrolysis is usually achieved through the addition of enzymes, such as amylases. Once the starch has been converted into simpler sugars, yeast or bacteria are added to initiate the fermentation process, in which the sugars are converted into ethanol and carbon dioxide. This process is widely used in the production of alcoholic beverages, such as beer and wine, as well as in the production of biofuels, such as ethanol.

Read lesson note on Chemistry Of Carbon Compounds (Ghana Only) (WAEC)

Read lesson note on Electrolysis (JAMB)

Read lesson note on Energy And Energy Changes (WAEC)

Chemistry Of Carbon Compounds (Ghana Only)

Electrolysis

Energy And Energy Changes

View Answer

Question 29 Report

A mixture is different from a compound because

the properties of a compound are those of its individual constituents while those of a mixture differ from its constituents

a mixture is always homogeneous while a compound is not

the constituent of a compound are chemically bound together while those of a mixture are not Correct answer

a mixture can be represented by a chemical formula while a compound cannot

Answer Details

Read lesson note on Separation Of Mixtures And Purification Of Chemical Substances (JAMB)

Separation Of Mixtures And Purification Of Chemical Substances

View Answer

Question 30 Report

The IUPAC nomenclature of the compound above is

2-bromo-3-chlorobutanol

3-bromo-2-chlorobutanol

3-chloro-2-bromobutanol

2-chloro-3-bromobutanol Correct answer

Answer Details

Read lesson note on Chemistry Of Carbon Compounds (Nigeria Only) (WAEC)

View Answer

Question 31 Report

200 cm3 of a gas at 25oC exerts a pressure of 700 mmHg. Calculate its pressure if its volume increase 350 cm3 at 75oC.

342.53 mmHg

1430.54 mmHg

467.11 mmHg Correct answer

400.00 mmHg

Answer Details

\(\frac{p 1V 1}T 1\) = \(\frac{P 2V 2}{T 2}\)

\frac{700 x 200}{298}

= \(\frac{P2X 350}{348}\) P2 =

\frac{700 x 200 x 348}{298 x 350}

= 467.11mmHg

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

View Answer

Question 32 Report

In an equilibrium reaction, which of the following conditions indicates that maximum yield of the product will be obtained?

Equilibrium constant is very large Correct answer

∆H - T∆S = O

∆ H > T ∆ S

Equilibrium constant is less than zero

Answer Details

Read lesson note on Chemical Equilibria (JAMB)

Chemical Equilibria

View Answer

Question 33 Report

The process of converting linear alkanes to branched chain and cyclic hydrocarbons by heating in the presence of a catalyst to improve the quality of petrol is referred to as

refining

craching

reforming Correct answer

blending

Answer Details

The process described is called "reforming." Reforming is a process used in the petroleum industry to convert straight-chain hydrocarbons, which have low octane ratings and do not burn efficiently, into branched chain or cyclic hydrocarbons, which have higher octane ratings and burn more efficiently. The process involves heating the hydrocarbons in the presence of a catalyst, which causes the molecules to rearrange into a more desirable form. The resulting product is then used to improve the quality of gasoline, making it burn more efficiently and produce less harmful emissions.

Read lesson note on Chemistry Of Carbon Compounds (Nigeria Only) (WAEC)

View Answer

Question 34 Report

On exposure to the atmosphere, a hydrated salt loses its water of crystallization to become anhydrous. This phenomenon is referred to as

efflorescence Correct answer

diliquescence

hygroscopy

hydrolysis

Answer Details

The phenomenon in which a hydrated salt loses its water of crystallization when exposed to the atmosphere is called efflorescence. Hydrated salts are those that have water molecules chemically bound to their crystal structures. When exposed to the atmosphere, the water molecules in the hydrated salt can evaporate into the air, leaving behind a dry, anhydrous salt. This process occurs due to the difference in vapor pressure between the water molecules in the salt and the water molecules in the air. If the vapor pressure of the water molecules in the air is lower than that of the water molecules in the salt, the water molecules in the salt will evaporate into the air. Efflorescence is commonly observed in certain salts such as sodium carbonate (Na2CO3), which is a hydrated salt containing ten water molecules. When exposed to air, Na2CO3 loses its water molecules and becomes anhydrous. The anhydrous form of Na2CO3 is commonly known as soda ash. Therefore, the correct answer is option A) efflorescence.

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 35 Report

The general formula of an alkyl halide (where X represents the halide) is?

CnH2n2X

CnH2n + 1X Correct answer

CnH2n + 2X

CnH2nX

Answer Details

Read lesson note on Periodic Chemistry (Ghana Only) (WAEC)

Periodic Chemistry (Ghana Only)

View Answer

Question 36 Report

\(\mathrm{Cr_2O_7^{2-}(aq) + H_2O(1) \rightleftharpoons 2CrO_4^{2-}(aq) + 2H^+(aq)}\)

What happens to the reaction above when the hydrogen ion concentration is increased?

more of the products will be formed

the reaction will not proceed

the equilibrium position will shift to the right

the equilibrium position will shift to the left. Correct answer

Answer Details

In the given chemical reaction, Cr2O2−7 ions react with water to form 2CrO 2−4 ions and hydrogen ions (H+). This reaction is in equilibrium, meaning the reactants are forming products and the products are forming reactants at the same rate. According to Le Chatelier's principle, when a stress is applied to a system in equilibrium, the system will shift to counteract the stress. In this case, increasing the hydrogen ion concentration will increase the stress on the equilibrium system. To counteract this stress, the system will shift to consume the additional hydrogen ions. Since hydrogen ions are one of the products of the reaction, the system will shift to form more reactants and less products. Therefore, the equilibrium position will shift to the left. So, the correct answer is (D) the equilibrium position will shift to the left.

Read lesson note on Chemical Equilibria (JAMB)

Chemical Equilibria

View Answer

Question 37 Report

How many protons, neutrons and electrons respectively are present in the element 60/27 Co?

27, 33 and 33

33, 27 and 27

27, 33, and 27 Correct answer

60, 33 and 60

Answer Details

The element with the symbol 60/27 Co represents cobalt (Co) with an atomic mass of 60 and an atomic number of 27. The atomic number of an element represents the number of protons in the nucleus of an atom. Therefore, cobalt has 27 protons. The atomic mass of an element represents the number of protons and neutrons in the nucleus of an atom. To find the number of neutrons in cobalt, we can subtract the atomic number from the atomic mass: Number of neutrons = Atomic mass - Atomic number = 60 - 27 = 33 Therefore, cobalt has 33 neutrons. The number of electrons in an element is equal to the number of protons in the nucleus, assuming that the atom is neutral. Therefore, cobalt has 27 electrons. So, the correct answer is: 27, 33, and 27.

Read lesson note on Atomic Structure And Bonding (JAMB)

View Answer

Question 38 Report

The basicity of CH3COOH is

1 Correct answer

Answer Details

Read lesson note on Periodic Chemistry (Ghana Only) (WAEC)

Periodic Chemistry (Ghana Only)

View Answer

Question 39 Report

The petroleum fraction that is used in heating furnaces in industries is

diesel oil Correct answer

gasoline

kerosene

lubricating oil

Answer Details

Read lesson note on Chemistry And Industry (JAMB)

Read lesson note on Structure Of The Atom (WAEC)

Read lesson note on Organic Compounds (JAMB)

Chemistry And Industry

Structure Of The Atom

Organic Compounds

View Answer

Question 40 Report

Calculate the quantity of electricity in coulombs required to liberate 10g of copper from a copper compound[Cu=64, F = 96500 Cmol-1]

32395.5

30156.3 Correct answer

60784.5

15196.5

Answer Details

Cu → Cu2++ 2e
64g Cu requires 2 x 96500 coloumbs 10g Cu requires x columbs
x = 10x2x96500/64 =30156.3

Read lesson note on Electrolysis (JAMB)

Electrolysis

View Answer

Question 41 Report

How many faraday of electricity is required to produce 0.25 mole of copper?

1.00F

0.01F

0.05F

0.50F Correct answer

Answer Details

Cu → Cu2+ + 2e
1mole Cu requires 2f
0.25 mole Cu requires x
x = 0.25x2/1 = 0.50f

Read lesson note on Electrolysis (JAMB)

Electrolysis

View Answer

Question 42 Report

A compound that gives a brick-red colour to a non-luminous flame is likely to contain

copper ions

sodium ions

calcium ions Correct answer

aluminium ions

Answer Details

Read lesson note on Acids, Bases And Salts (JAMB)

Acids, Bases And Salts

View Answer

Question 43 Report

The colour of litmus in a neutral medium is

purple Correct answer

pink

yellow

orange

Answer Details

Litmus is a type of natural dye that is extracted from certain lichens. It is used as an acid-base indicator in chemistry. When litmus is added to a neutral solution, it turns into a specific color. The color of litmus in a neutral medium is purple. Therefore, the correct answer to the question is "purple."

Read lesson note on Acids, Bases And Salts (Ghana Only) (WAEC)

View Answer

Question 44 Report

16.55g of lead (ll) trioxonitrate (V) was dissolved in 100g of distilled water at 20oC, calculate the solubility of the solute in moldm-3

[Pb = 207, N = 14, O = 16]

0.05 g

2.00 g

1.00 g

none of the above Correct answer

Answer Details

The problem provides the amount of lead (II) trioxonitrate (V) dissolved in 100g of water at a specific temperature. The question asks for the solubility of the solute in moldm-3. To calculate the solubility, we need to determine the amount of the solute (lead (II) trioxonitrate (V)) that is present in one liter of the solution. We can use the given amount of the solute and the molar mass of the compound to calculate the number of moles present in the solution. First, we calculate the molar mass of lead (II) trioxonitrate (V): 207 (mass of lead) + 3(16) (mass of oxygen) + 2(14) (mass of nitrogen) = 406 g/mol Next, we calculate the number of moles of the solute present in the solution: 16.55 g / 406 g/mol = 0.0407 mol Finally, we can calculate the solubility of the solute in moldm-3 by dividing the number of moles by the volume of the solution in liters: 0.0407 mol / 0.1 L = 0.407 moldm-3 Therefore, the solubility of the solute in moldm-3 is 0.407. The correct option is: - 0.05 g (none of the above) None of the options provided match the calculated solubility value.

Read lesson note on Solubility (JAMB)

Solubility

View Answer

Question 45 Report

\(\mathrm{CH_3COOC_2H_5}(1) + \mathrm{H_2O}(1) \rightleftharpoons \mathrm{CH_3COOH}(aq) + \mathrm{C_2H_5OH}(aq)\)

The purpose of \(\mathrm{H^+}\) in the reaction above is to

increase the yield of products Correct answer

maintain the solution at a constant PH

increase the rate of the hydrolysis

decrease the rate of the reverse reaction

Answer Details

Read lesson note on Kinetic Theory Of Matter And Gas Laws (JAMB)

Read lesson note on Electrolysis (JAMB)

Electrolysis

View Answer

Question 46 Report

Which of the following salts will turn blue litmus red?

Sodium tetrahydroxozincate (ll)

Potassium hydrogentetraoxosulphate (lV) Correct answer

Sodium trioxocarbonate (lV)

Zinc chloride hydroxide

Answer Details

Blue litmus paper is used to test whether a substance is acidic or not. If a substance is acidic, it will turn blue litmus paper red. Out of the given options, only one substance is acidic in nature, which is potassium hydrogentetraoxosulphate (lV). Sodium tetrahydroxozincate (ll), Sodium trioxocarbonate (lV), and Zinc chloride hydroxide are either neutral or basic in nature and will not turn blue litmus paper red. Therefore, the answer is potassium hydrogentetraoxosulphate (lV).

Read lesson note on Acids, Bases And Salts (Ghana Only) (WAEC)

View Answer

Question 47 Report

The mathematical expression of PH is

log 10[OH-]

log 101/[H 3 O+] Correct answer

log 10[H 3 O+]

log 101/[OH -]

Answer Details

Read lesson note on Acids, Bases And Salts (Ghana Only) (WAEC)