WAEC SSCE - Chemistry - 2001

A mixture of calcium chloride and calcium trioxocarbonate (IV) in water can be separated by

Antwoorddetails

A mixture of calcium chloride and calcium trioxocarbonate (IV) in water can be separated by filtration. Filtration is a separation technique that separates solids from liquids using a porous material or a filter. Calcium trioxocarbonate (IV) is insoluble in water while calcium chloride is soluble in water. When the mixture is passed through a filter, calcium trioxocarbonate (IV) will be left behind as a residue while the filtrate will contain calcium chloride in water. Therefore, filtration can be used to separate the two components of the mixture.

Which of the following compounds is covalent?

Antwoorddetails

Among the given compounds, CH₄ is covalent. Covalent compounds are formed when two or more non-metal atoms share electrons to form a molecule. CH₄ is methane, which is a simple organic compound made up of one carbon and four hydrogen atoms. Both carbon and hydrogen are non-metals, and they share electrons to form four covalent bonds, resulting in a stable molecule. The other three compounds, CaCI₂, MgO, and NaN, are all ionic compounds, which are formed by the transfer of electrons between a metal and a non-metal.

A gas was evolved when a sample of gastric juice reacted with sodium trioxocarbonate (IV) . The gas evolved was

Antwoorddetails

The gas evolved when a sample of gastric juice reacts with sodium trioxocarbonate (IV) can be determined by identifying the reaction taking place. Gastric juice contains hydrochloric acid (HCl), and when it reacts with sodium trioxocarbonate (IV) (Na₂CO₃), carbon dioxide (CO₂) gas is evolved. This is because the reaction between hydrochloric acid and sodium trioxocarbonate (IV) produces carbon dioxide, sodium chloride, and water as products. The balanced equation for this reaction is: 2HCl + Na₂CO₃ → CO₂ + NaCl + H₂O Therefore, the correct answer is CO₂.

Which of the following acids forms normal salts only?

Antwoorddetails

Which of the following would dissolve in warm dilute H₂SO₄ without effervescence, to give a blue solution?

Antwoorddetails

Calculate the mass of sodium hydroxide in 5.00 dm³ of a 0.125 mol dm^-3 solution [NaOH = 40 g mol]

Antwoorddetails

To calculate the mass of sodium hydroxide in 5.00 dm³ of a 0.125 mol dm^-3 solution, we need to use the formula: mass = molarity x volume x molecular weight where: - molarity = 0.125 mol dm^-3 (given) - volume = 5.00 dm³ (given) - molecular weight of NaOH = 40 g mol^-1 (given) Substituting the values into the formula, we get: mass = 0.125 mol dm^-3 x 5.00 dm³ x 40 g mol^-1 mass = 25.0 g Therefore, the mass of sodium hydroxide in 5.00 dm³ of a 0.125 mol dm^-3 solution is 25.0 g. The correct option is (d).

What will happen if more heat is applied to the following system at equilibrium? X_2(g) + 3Y _2(g) ⇌ 2XY_3(g); ∆H =-kJmol ^-1

Antwoorddetails

A reaction is represented by the equation below. A_2(g) + B_2(g) 2AB_(g); ∆H = +X kJmol^-1 Which of the following statements about the system is correct?

Antwoorddetails

Acidic industrial waste can be treated with

Antwoorddetails

Acidic industrial waste can be treated with lime. Lime is an alkaline substance that can be used to neutralize acidic waste by a process called neutralization. In this process, the lime reacts with the acid to form a salt and water, resulting in a neutral pH. This neutralization reaction is an important step in the treatment of industrial waste, as acidic waste can be harmful to the environment and living organisms. Brine, water, and ethanol are not commonly used for treating acidic waste.

Which of the compounds will leave a metal residue when heated?

Antwoorddetails

In the electrolysis of CuSO_4(aq) using copper electrodes, the reaction at the anode is

Antwoorddetails

During the electrolysis of copper sulfate (CuSO₄), the copper anode loses mass as copper atoms are oxidized to form copper ions that enter the solution. This means that the reaction at the anode is the dissolution of the copper electrode. Therefore, the correct option is "dissolution of copper electrode."

Which of the following reactions represents the change that occurs when a photographic film is exposed to sunlight?

Antwoorddetails

When a photographic film is exposed to sunlight, the silver halide grains in the film emulsion are converted to metallic silver. This process involves the reduction of silver ions (Ag⁺) to neutral silver atoms (Ag) by the electrons (e^-) produced by the exposure to light. Therefore, the correct reaction that represents the change that occurs when a photographic film is exposed to sunlight is: Ag⁺ + e^- → Ag

What volume of hydrogen will be produced if 100cm³ of ammonia is completely decomposed at constant temperature and pressure? The equation for the reaction is 2NH_3(g) → N_2(g) + 3H_2(g)

Antwoorddetails

From the balanced chemical equation, we know that 2 moles of NH₃ will produce 3 moles of H₂. Therefore, to calculate the volume of H₂ produced, we need to first find the number of moles of NH₃ in 100cm³: 1 mole of any gas at room temperature and pressure (RTP) occupies a volume of 24dm³ (24000cm³). Therefore, the number of moles of NH₃ in 100cm³ can be calculated as follows: 100cm³ = 100/1000 = 0.1dm³ 0.1dm³ of NH₃ at RTP = 1/24 moles (since 24dm³ = 1 mole) Therefore, the number of moles of NH₃ in 100cm³ = (1/24) x 0.1 = 0.00417 moles (to 3 significant figures) Since 2 moles of NH₃ produce 3 moles of H₂, we can calculate the number of moles of H₂ produced as follows: Number of moles of H₂ = (3/2) x 0.00417 = 0.00625 moles (to 3 significant figures) Finally, we can use the ideal gas law to calculate the volume of H₂ produced: PV = nRT where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. Since the temperature and pressure are constant, we can write: V_H2 / n_H2 = V_NH3 / n_NH3 where V_H2 and n_H2 are the volume and number of moles of H₂, and V_NH3 and n_NH3 are the volume and number of moles of NH₃. Substituting the values we have calculated: V_H2 / 0.00625 = 0.1 / (1/24) V_H2 = 0.00625 x (1/0.0417) x 24 = 150cm³ Therefore, the volume of hydrogen produced is 150cm³.

What is responsible for metallic bonding?

Antwoorddetails

Metallic bonding is responsible for the unique properties of metals, such as their malleability, ductility, and conductivity. It occurs due to the attraction between the positively charged atomic nuclei and the delocalized cloud of electrons surrounding them. In metallic bonding, the valence electrons are not held tightly by any one atom but are free to move throughout the metal lattice. This allows for the sharing of electrons between many atoms, creating a cohesive and stable structure. Therefore, the correct answer is "Attraction between the atomic nuclei and cloud of electrons."

Equal amounts of marble chips are reacted separately with 100cm³ of hydrochloric acid of different concentrations . if all the marble chips reacted, which of the following remained the same in each case?

Antwoorddetails

A sheet of paper is placed in the path of a beam from a radioactive source. The emissions that pass through the paper consist of

Antwoorddetails

The atom of an element X combines with aluminium (₁₃AI)?

Antwoorddetails

The correct answer is AI ₂X ₃. This is because when the atom of an element X combines with aluminium (₁₃AI), it forms an ionic compound. The formula for ionic compounds is determined by balancing the charges of the ions involved. Aluminium has a charge of 3+ while the atom of element X has a charge of 2-. To balance the charges, two atoms of element X are required for every three aluminium atoms. The resulting formula for the compound is AI ₂X ₃.

Which of the following substances decomposes when an electric current is passed through it?

Antwoorddetails

Out of the given options, tetrachloromethane is the substance that decomposes when an electric current is passed through it. Tetrachloromethane, also known as carbon tetrachloride, is a covalent compound with the chemical formula CCl₄. It is a non-conductor of electricity in its pure form, but when it is mixed with small amounts of impurities, it becomes a conductor of electricity. When an electric current is passed through it, tetrachloromethane undergoes electrolysis, which breaks down the C-Cl bonds and forms various products, including chlorine gas and phosgene gas. On the other hand, glucose solution, zinc rod, and hydrochloric acid do not decompose when an electric current is passed through them. Glucose is a covalent compound that does not dissociate into ions in solution, so it cannot undergo electrolysis. Zinc is a metal and a good conductor of electricity, but it does not undergo any significant chemical reaction when an electric current is passed through it. Hydrochloric acid is an aqueous solution of hydrogen chloride, which dissociates into H⁺ and Cl^- ions in solution. However, it is not a good conductor of electricity because the concentration of ions is relatively low.

Given that the order of reactivity of four metals is P>Q>R>S, which of the following reactions is feasible?

Antwoorddetails

Feasible reactions between two metals occur when the metal higher in the reactivity series displaces the metal lower in the reactivity series from its compound. Based on the given order of reactivity (P>Q>R>S), feasible reactions will occur between P and Q, R and S, and P and S. Therefore, the only feasible reaction from the options provided is: Q + S⁺ → S + Q⁺

P _Total = F₁ + P₂ + P ₃ + .........P_n' where P _Total is the pressure of a mixture of gasses. The equation above is an expression of

Antwoorddetails

The equation P_Total = F₁ + P₂ + P ₃ + .........P_n' is an expression of Dalton's law. Dalton's law states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the individual gases in the mixture. In other words, the total pressure exerted by a mixture of gases is equal to the sum of the pressures that each gas would exert if it were present alone in the same container at the same temperature.

Consider the following equation: Ag⁺ _(aq) + CI-_(aq) → Ag⁺CI- _(s) ; ∆H = _65.7 kJmol^-1. From the equation, it can be deduced that

Antwoorddetails

The given equation is a chemical equation that represents a reaction between silver ion (Ag⁺) and chloride ion (CI^-) to form silver chloride (Ag⁺CI^-). The value of enthalpy change (∆H) is given as -65.7 kJmol^-1, which indicates that the reaction is exothermic, i.e., heat is evolved during the reaction. Thus, the correct option is "a solid is formed and heat is evolved."

Which of the following decreases when a given mass of gas is compressed to half its initial volume?

Antwoorddetails

One of the products of combustion of pentane in excess air is

Antwoorddetails

One of the products of combustion of pentane in excess air is carbon (IV) oxide. During combustion, pentane reacts with oxygen from the air to produce carbon dioxide and water. The balanced chemical equation for the combustion of pentane is: C5H12 + 8O2 → 5CO2 + 6H2O This means that for every molecule of pentane that reacts, five molecules of carbon dioxide and six molecules of water are produced. Since carbon dioxide is a type of carbon (IV) oxide, it is one of the products of combustion of pentane in excess air.

Elements which belong to the same group in the Periodic Table are characterized by

Antwoorddetails

Elements which belong to the same group in the Periodic Table are characterized by the presence of the same number of outermost electrons in the respective atoms. The groups are the columns in the periodic table, and elements within the same group have similar chemical and physical properties. This is because they have the same number of valence electrons, which are the electrons involved in chemical bonding. As a result, they tend to react similarly with other elements and form similar types of compounds. Therefore, the correct option is (b): presence of the same number of outermost electrons in the respective atoms.

In which of the reactions represented by the following equations is HNO₃ behaving as a typical acid?

Antwoorddetails

Which of the following substances increases in mass when heated in air?

Antwoorddetails

A major factor coonsidered in selecting a suitable method for preparing a simple salt is its

Antwoorddetails

When preparing a simple salt, one of the major factors to consider is its solubility in water. This is because the method used for preparation should be able to dissolve the necessary reactants in water to form a solution that can be further processed to yield the desired salt. The solubility of a salt in water determines the concentration of the reactants in the solution and affects the rate and completeness of the chemical reaction. Hence, solubility plays a critical role in selecting a suitable method for preparing a simple salt.

Which of the following polymers contains nitrogen?

Antwoorddetails

Nylon is the polymer that contains nitrogen. Nylon is a synthetic polymer that contains amide linkages in its structure. These amide linkages are formed between the amine group (-NH2) of one monomer and the carboxylic acid group (-COOH) of another monomer, resulting in the formation of a long chain polymer with repeating units of -(NH-[CH2]n-CO)-. The presence of the amide group in nylon gives it unique properties such as high strength and elasticity.

Sugars can be hydrolyzed at room temperature by the action of

Antwoorddetails

Sugars are carbohydrates that can be broken down by hydrolysis, which involves breaking down the glycosidic bond between the sugar units. Hydrolysis of sugars can occur by the action of different agents. Mineral acids and strong bases can both catalyze the hydrolysis of sugars, but they require high temperatures to work efficiently. Enzymes, on the other hand, are biological catalysts that can catalyze the hydrolysis of sugars at room temperature, with high specificity and efficiency. Enzymatic hydrolysis of sugars involves the action of specific enzymes that recognize and break down specific types of glycosidic bonds. Oxidants, which are substances that can accept electrons in a chemical reaction, are not typically used to hydrolyze sugars.

What is the function of H₂SO₄ in the following reaction? C₁₂
H₂₂O₁₁ conc. H₂4 12C + 11H₂O

Antwoorddetails

The function of H₂SO₄ in the given reaction is that of a dehydrating agent. The concentrated sulfuric acid (H₂SO₄) is used in this reaction to remove the water (H₂O) molecule from the reactant molecule C₁₂H₂₂O₁₁ (sucrose). The removal of a water molecule from a molecule is known as dehydration. Therefore, in this reaction, H₂SO₄ acts as a dehydrating agent, which removes water from the reactant molecule and helps to form carbon (C) and water (H₂O) as products.

Which of the following statements about ideal gases is/are correct? 1. The cohesive forces between their particles are negligible ll. The have no definite volume but occupy the volume of their containers III. They are not compressible IV. Their particles collide with loss of energy

Antwoorddetails

The conclusion from Rutherford's from radioactive substance alpha-scattering experiment is that

Antwoorddetails

The conclusion from Rutherford's alpha-scattering experiment is that atoms are mostly empty space with a small, dense, positively charged nucleus at the center. This was determined by observing that alpha particles, which are positively charged, were mostly able to pass through the gold foil with little to no deflection, but occasionally were deflected at large angles. This led to the conclusion that most of the atom's mass and positive charge is concentrated in a small, dense nucleus at the center, with the electrons orbiting around it.

Which of the following salt solutions will have a pH greater than 7?

Antwoorddetails

If 10 cm ³ of distilled water is added to 10 cm³ of an aqueous salt solution, the concentration of the solution

Antwoorddetails

If 10 cm³ of distilled water is added to 10 cm³ of an aqueous salt solution, the total volume of the resulting solution is 20 cm³. However, the amount of solute (the salt) in the solution remains constant, while the amount of solvent (the water) increases. Therefore, the concentration of the solution decreases since the same amount of solute is now present in a larger volume of solution. So, the correct option is: the concentration decreases.

Which of the following features of a human skeleton can be determined by carbon-dating?

Antwoorddetails

Carbon dating is a method used to determine the age of organic materials, such as bones and teeth. This method is based on the fact that carbon-14, a radioactive isotope of carbon, decays at a known rate over time. As living organisms take in carbon-14 during their lifetime, the amount of carbon-14 in their bones and teeth can be used to determine the approximate age of the sample. Therefore, of the options given, only the age of a human skeleton can be determined by carbon-dating. The other features such as height, mass, and race cannot be determined by carbon-dating.

A substance is said to be hygroscopic if it absorbs?

Antwoorddetails

A substance is said to be hygroscopic if it absorbs moisture from the atmosphere without dissolving. Hygroscopic substances have the ability to attract and retain water molecules from the air around them, which can lead to their physical properties being altered. This can include changes in texture, shape, and size. Some examples of hygroscopic substances include salt, sugar, and certain types of paper.

CuSO₄ 5H₂O can be obtained from an aqueous solution of copper (ll) tetraoxosulphate (VI) by

Antwoorddetails

CuSO₄ 5H₂O can be obtained from an aqueous solution of copper (ll) tetraoxosulphate (VI) by crystallization. Crystallization is a process of separating a solid product from a liquid by allowing the liquid to evaporate under controlled conditions. In this case, an aqueous solution of copper (II) tetraoxosulphate (VI) can be heated to form a saturated solution. The solution is then cooled slowly to allow the formation of CuSO₄ 5H₂O crystals. These crystals can be collected by filtration to obtain the desired product. Therefore, the correct option is "crystallization".

Which of the following pairs of reagents reat to produce hydrogen?

Antwoorddetails

The pair of reagents that react to produce hydrogen is: Magnesium and dilute tetraoxosulphate (VI) acid. When magnesium is added to dilute tetraoxosulphate (VI) acid, hydrogen gas is produced as one of the products. This is a classic example of a single-displacement reaction, where the more reactive metal (magnesium) displaces the less reactive hydrogen from the acid. The other options do not produce hydrogen gas upon reaction.

The presence of unpaired electrons in an atom of a transition metal gives rise to

Antwoorddetails

The presence of unpaired electrons in an atom of a transition metal gives rise to paramagnetism. Paramagnetism is a type of magnetism that occurs when certain materials are placed in an external magnetic field. When a transition metal atom has unpaired electrons in its outermost energy level, it can become magnetized and attracted to an external magnetic field. This is because the unpaired electrons can align their spins with the external magnetic field, causing the atom to become magnetized. Therefore, the presence of unpaired electrons in an atom of a transition metal is responsible for its paramagnetic behavior.

A visible change is observed when a strip of iron is placed in an aqueous solution of

Antwoorddetails

When a strip of iron is placed in an aqueous solution of CuSO₄, a visible change is observed. This is because copper ions in the CuSO₄ solution gain electrons from the iron strip and are reduced to metallic copper, which is deposited on the iron strip. At the same time, iron atoms on the strip lose electrons and are oxidized to iron(II) ions, which dissolve in the solution. The overall reaction is: Fe(s) + CuSO₄(aq) → FeSO₄(aq) + Cu(s) The visible change observed is the deposition of metallic copper on the iron strip, which appears as a reddish-brown coating. This process is known as a displacement reaction, where a more reactive metal (in this case, iron) displaces a less reactive metal (copper) from its salt solution.

Benzene produces more soot than ethene on burning because benzene

Antwoorddetails

Waste plastics accumulate in the soil and pollute the environment because plastic materials are

Antwoorddetails

The accumulation of waste plastics in the soil and the environment is mainly due to the fact that plastic materials are non-biodegradable. This means that they cannot be broken down by natural biological processes, unlike organic materials such as paper or food waste. Plastics are made up of long chains of polymers that do not readily decompose, and thus persist in the environment for a long time, causing pollution. Plastics are also typically insoluble in water, making it difficult for them to dissolve and be removed by water-based processes. While some plastics are flammable, they are not easily affected by heat in the sense of breaking down or decomposing quickly, and may actually release harmful gases when burned.

The gas given off when NH₄Cl is heated with an alkali is

Antwoorddetails

When NH₄Cl is heated with an alkali, it undergoes a chemical reaction known as the Hofmann's degradation reaction, which produces ammonia gas (NH₃). The reaction is represented as: NH₄Cl + NaOH → NaCl + H₂O + NH₃ Therefore, the correct answer is NH₃.

A feasible cell was constructed by joining the two half cells below. Cu2+ (aq) + 2e- → Cu(s) Eo = - 0.76 V. What is the standard e.m.f. of the cell?

Antwoorddetails

Which of the following constitutes an advantage in the use of hard water?

Antwoorddetails

Hard water is water that contains dissolved minerals such as calcium and magnesium. These minerals can provide health benefits and contribute to the formation of strong bones, which is an advantage. However, the other options listed in the question are disadvantages of hard water. When hard water reacts with soap, it forms scum that reduces the effectiveness of cleaning. Furring of kettles is the buildup of mineral deposits that reduces efficiency and increases energy consumption. Blockage of water pipes can lead to reduced water flow and increased maintenance costs.

Hydrogenation of butene yields

Antwoorddetails

The hydrogenation of butene involves the addition of hydrogen gas to the double bond of butene molecule. This reaction is a type of addition reaction, where two reactants combine to form a single product. The product of the hydrogenation of butene is butane. This is because the addition of hydrogen to the double bond of butene saturates the carbon atoms, and forms a single bond between them, resulting in a straight-chain alkane. Therefore, the correct answer is "butane".

What is the oxidation number of nitrogen in AI(NO₃)₃?

Antwoorddetails

In AI(NO₃)₃, the compound has a total charge of 0 because aluminum has a charge of +3 and nitrate (NO₃) has a charge of -1. Since there are three nitrate ions, their total charge is -3. Therefore, the oxidation number of nitrogen can be calculated as follows: AI(NO₃)₃ Aluminum = +3 Oxygen (O) in NO₃ = -2 Nitrogen (N) in NO₃ = x The sum of the oxidation numbers must equal the charge of the compound (0). +3 + 3(-2) + 3x = 0 -6 + 3x = 0 3x = 6 x = +2 Therefore, the oxidation number of nitrogen (N) in AI(NO₃)₃ is +5.

What is oxidized in the reaction represented by the following equation? 3CU + 8HNO₃ → 3Cu(NO₃)₂ + 2NO + 4H₂O

Antwoorddetails

In the given reaction, copper is oxidized because its oxidation state increases from 0 in Cu to +2 in Cu(NO3)2. Oxidation is defined as the loss of electrons or an increase in oxidation state. Here, copper loses electrons and its oxidation state increases, hence it is oxidized. Therefore, the correct answer is copper.

A concentrated solution containing H⁺, Cu²⁺,OH^- and CI^- was electrolysed using platiunm electrodes which of the ions will be discharged at the cathods?

Antwoorddetails

It can be concluded that gastric juice

Antwoorddetails

Gastric juice is a digestive fluid secreted by the stomach. It is primarily composed of hydrochloric acid, which makes it very acidic with a pH value of about 2. Additionally, gastric juice contains enzymes such as pepsin, which is responsible for breaking down proteins. Therefore, it can be concluded that gastric juice contains enzymes and is acidic. It is not a mixture of substances, and it does not have a pH value of 7, which is neutral.

If a metal R forms a compound with the formula R(NO₃)₂ the formula of its tetraoxosulphate (VI) is

Antwoorddetails

What does ∆H represent in the following equation ? Cl_(g) + e- → CI- _(g); ∆H = - 363 kJ mol-¹

Antwoorddetails

In the given equation, ∆H represents the Electron affinity. Electron affinity is the energy change that occurs when an atom in the gas phase gains an electron to form a negative ion. The negative value of ∆H in the equation indicates that energy is released when an electron is added to the chlorine atom to form a chloride ion.

(a)(i) Draw and label a simple cell for the electrolytic purification of copper.

(ii) Write can equation for the reaction at each electrode in (a)(i) above.

(iii) State with reason whether the Daniell cell is an electrolytic cell or an electrochemical cell.

(iv) What is the function of MnO\(_2\) in the Laclanche cell?

(b) Consider the following equation: MnO\(^-_4\) + 8H\(^+\) + xe\(^-\) \(\to\) Mn\(^{2+}\) + yH\(_2\)O. State the

(i) values of x and y;

(ii) oxidation state of Mn in MnO\(^-_4\).

(c)(i) List three factors that affect selective discharge of ions during electrolysis

(ii) State Faraday's second law of electrolysis.

(iii) A voltameter containing silver trioxonitrate(V) solution was connected in series to another voltameter containing copper (II) tetraoxosulphate(VI) solution. When a current ri 0.200 ampere was passed through the solutions, 0.780g of silver was deposited. Calculate the

I. mass of copper that would be deposited in the copper voltameter

II. quantity of electricity used and the time of current flow. [Cu = 63.5 ; Ag = 108; 1F = 96500C]

Antwoorddetails

None

TEST OF PRACTICAL KNOWLEDGE QUESTION

All your burette readings (initial and final), as well as the size of your pipette, must be recorded but on no account of experiment procedure is required. All calculations must be done in your answer book.

A is mol dm HCI. B is a solution containing 15.0 g dm of a mixture of NaCl and KHCO\(_3\).

(a) Put A burette and titrate it against 20.0cm\(^3\) or 25.0cm\(^3\) portions of B using methyl orange as indicator. Record the volume of your pipette. Tabulate your burette readings and calculate the average volume of A used. The equation for the reaction involved in the titration is: HCl\(_{aq}\) + KHCO\(_{3(aq)}\) \(\to\) KCl\(_{(aq)}\) +CO\(_{2(g)}\) 

(b) From your results and the information provided above, calculate the:

(i) concentration of KHCO\(_3\), in mol dm\(^{-3}\) in B;

(ii) mass of KHCO\(_3\), in g dm\(^{-3}\) in B

(ii) Percentage by mass of KHCO\(_{3}\) in the mixture, [H=1; C = 12; O = 16; K = 39]

(iv) mass of NaCl in the mixture.

Antwoorddetails

None

(a) State three characteristic properties of

(i) electrovalent compounds;

(ii) alpha particles

(iii) catalysts

(b)(i) Write the electronic configuration of silicon (atomic number 14) and state the group to which it belongs in the Periodic Table.

(ii) State the type of chemical bonding between silicon and oxygen in SiO\(_2\)

(iii) A chip used in a microcomputer contains 5.72 x 10\(^{-3}\)g of silicon, calculate the number of silicon atoms in the chip.

[Si = 28; Avogadro constant = 6.02 x 10\(^{23}\) mol\(^{-1}\)]

(c) An element X belongs to the same group as sodium but is more reactive.

(i) Suggest with reason whether X would be a reducing or oxidizing agent.

(ii) What would be a suitable method of storing X in the laboratory?

(iii) Describe briefly what would be observed if a small piece of X were dropped into a trough of cold water which had been coloured with red litmus.

(iv) Write an equation to show how the oxide of X would react with dilute HCI.

(v) Suggest the likely colour of the salts of X

Antwoorddetails

None

(a) List two substances that can be used in the laboratory to

(i) dry hydrogen;

(ii) remove carbon (IV) oxide from a sample of air;

(iii) convert hot copper (II) oxide to copper;

(iv) prepare zinc chloride by the action of dilute HCI.

(b)(i) Name two alloys which contain lead.

(ii) State and explain what is observed on bubbling H\(_2\)S into a solution of Pb(NO)\(_2\).

(iii) A metal M exists as a silvery white solid at temperatures above 18°C and as a grey solid below 18°C.

I. name the phenomenon exhibited by M.

II. What term is used to describe the temperature given as 18°C in this case?

(c)(i) Write an equation for the action of heat on each of the following compounds:

I. AgNO\(_3\)

II. (NH4)\(_2\)CO\(_3\).

(ii) Copy and complete the table below

Antwoorddetails

None

(a) Describe briefly a suitable procedure for preparing a pure sample of MgSO\(_4\) starting from MgO.

(b)(i) Mention two sources of water pollution.

(ii) Explain why the sample of air collected in the process of boiling water is richer in oxygen than atmospheric air

(iii) Mention one substance used as coagulant in water treatment plants.

(c)(i) State two physical porperties of chlorine.

(ii) Write an equation to show how chlorine reacts with iron

(iii) Why is Chlorine preferred to sulphur (IV) oxide in the bleaching of cotton

(d) Bleaching powder reacts with dilute HCl according to the reaction below;

CaOCl\(_{2(s)}\) + 2HCI\(_{(aq)}\) -> CaCl\(_{2(aq)}\) + H\(_2\)O\(_{(l)}\) + Cl\(_{2(g)}\)

Calculate the mass of bleaching powder that will produce 400cm\(^3\) of chlorine at 25\(^o\)C and a pressure of 1.20 x 10\(^5\) NM\(^{-2}\). [O = 16.0; Cl = 35.5; Ca = 40.0;1 mole of gas occupies 22.4 dm\(^3\) at s.t.p; standard pressure = 1.01 x 10\(^6\) Nm\(^{-2}\)]

Antwoorddetails

None

TEST OF PRACTICAL KNOWLEDGE QUESTION

(a) If you were provided with anhydrous Na\(_2\)CO\(_3\), spatula and stirrer;

(i) list three other materials you would require to prepare a standard solution of Na\(_2\)CO\(_3\)

(ii) state what you would observe on adding diluted H\(_2\)SO\(_4\) to a portion of the Na\(_2\)CO\(_3\)

(b)(i) Describe briefly one chemical test you would perform to distinguish between zinc ions and aluminium ions in solution.

(ii) Mention one laboratory reagent you would use to;

I. produce ammonia from (NH\(_4\))\(_2\)SO\(_4\)

II. differentiate between precipitates of AgCl and Agl

lll. dehydrate ethanol

(c) Give the reason for each of the following laboratory practices

(i) Aqueous solutions of FeSO\(_4\) are freshly prepared when required for use.

(ii) The first jar of hydrogen collected during its preparation is discarded 

Antwoorddetails

None