JAMB UTME - Physics - 2024

Akọwa Nkọwa

The defect of the eye lens that occurs when the ciliary muscles are weak is known as Presbyopia.

Here's a simple explanation:

The ciliary muscles in the eye are responsible for helping the lens to change shape so that you can focus on objects at different distances. As people age, the ciliary muscles may become weaker. This weakness hampers their ability to properly adjust the lens. As a result, the lens cannot accommodate or focus as effectively, especially when looking at nearby objects. This leads to a difficulty in seeing objects up close clearly, which is known as presbyopia.

Presbyopia is a natural condition associated with aging, and it typically becomes noticeable in people in their 40s or 50s. This is different from other eye conditions like:

• Myopia, which is when distant objects appear blurry.
• Astigmatism, which is caused by an irregularly shaped cornea leading to blurry or distorted vision at all distances.
• Spherical aberration, which is a concept related to optical systems where light rays striking the edges of a lens do not focus at the same point as light rays passing through the center, but it is not specifically related to the ciliary muscles or biological aging.

So in summary, presbyopia is the condition that results from weakened ciliary muscles, affecting near vision as a person ages.

Akọwa Nkọwa

The tangential force acting on an object that opposes it from sliding freely on the adjacent surface is called the friction force.

Let me explain each of the options to clarify why friction force is the correct answer:

• Normal force: This is the force exerted by a surface perpendicular (at a right angle) to the object resting on it. It supports the weight of the object, stopping it from passing through the surface. It is not tangential and does not oppose sliding; rather, it acts perpendicular to the surface.
• Friction force: This is the force that acts parallel to the surface contact between two objects or surfaces. It arises when one object tries to move over another. The friction force acts to oppose that movement, providing the necessary resistance to prevent sliding.
• Weight: This is the gravitational force acting downwards due to the mass of an object. It does not act tangentially on the surface but directly downwards towards the center of the Earth.
• Upthrust: Also known as buoyant force, this is the upwards force experienced by an object when it is immersed in a fluid (liquid or gas). It is responsible for the object floating or being pushed up, and is not related to tangential force or friction.

In summary, friction force is the force that acts to oppose sliding between surfaces in contact and acts tangentially, making it the correct answer.

Akọwa Nkọwa

To determine the efficiency of a cell with an internal resistance of 2 Ω while supplying current to a 6 Ω resistor, we can use the concept of power dissipation. Efficiency in this context is the ratio of the power delivered to the external resistor to the total power supplied by the cell. It can be calculated using the formula:

Efficiency (%) = (Power across load resistor / Total power output by cell) × 100

Let's break it down step by step:

• Step 1: Total Resistance - The total resistance in the circuit is the sum of the internal resistance and the resistance of the external resistor:
• Total Resistance (R_total) = Internal Resistance (R_internal) + External Resistance (R_load)
• R_total = 2 Ω + 6 Ω = 8 Ω
• Step 2: Current Calculation - The current flowing through the circuit can be calculated using Ohm's Law, which states V = IR. Assume the electromotive force (EMF) of the cell is E volts:
• Current (I) = E / R_total
• I = E / 8 (Note: We keep E as a variable as it cancels out in the efficiency equation)
• Step 3: Power Delivered to Load - The power delivered to the external resistor can be calculated as:
• Power_load = I² × R_load
• Power_load = (E/8)² × 6
• Step 4: Total Power Supplied by the Cell - The total power supplied by the cell is given by:
• Power_total = EMF × Current = E × (E/8)
• Power_total = E² / 8
• Step 5: Calculate Efficiency: Finally, plug in the power values into the efficiency formula:
• Efficiency (%) = [(E/8)² × 6 / (E² / 8)] × 100
• Simplify to Efficiency (%) = [(6/8)] × 100 = 0.75 × 100 = 75%

The efficiency of the cell when supplying current to a 6 Ω resistor with an internal resistance of 2 Ω is 75%.

Akọwa Nkọwa

To find the apparent weight of a man of mass 60 kg standing in a descending lift, we first need to understand the concept of apparent weight. Apparent weight is the force that the man feels as his weight due to the reaction of the lift floor on him. When the lift accelerates, the apparent weight changes from his actual weight.

In this case, the lift is descending with a constant velocity of 3 m/s². Since the acceleration is downward, it means the lift is accelerating negatively compared to an upward acceleration.

The formula to find the apparent weight (W_apparent) when in a lift is:

W_apparent = m(g - a)

Where:

• m is the mass of the man, which is 60 kg
• g is the acceleration due to gravity, approximately 9.8 m/s²
• a is the acceleration of the lift (3 m/s² downward)

Substituting these values into the formula, we get:

W_apparent = 60 (9.8 - 3)

Calculating further:

W_apparent = 60 × 6.8

W_apparent = 408 N

The closest option to 408 N in the answers provided is 420 N. Therefore, the correct answer is 420 N.

Akọwa Nkọwa

To determine the energy of light given its frequency, we can utilize the formula:

E = h × f

Where:

E is the energy of the photon in joules (J)

h is Planck's constant, approximately 6.63 × 10^-34 J·s

f is the frequency of light in hertz (Hz)

Given the frequency f = 2.0 × 10¹⁵ Hz, we can substitute the known values into our equation:

E = 6.63 × 10^-34 J·s × 2.0 × 10¹⁵ Hz

To simplify the calculation, multiply the numerical parts and then add the indices of 10:

E = (6.63 × 2.0) × (10^-34 × 10¹⁵)

E = 13.26 × 10^-19 J

This can be approximated to 1.33 × 10^-18 J. Thus, the energy of light with the given frequency is 1.33 × 10^-18 J.

Akọwa Nkọwa

In order to find out how much energy the accumulator takes in, given that it is 90% efficient and gives out 2700J of energy, we can use the formula for efficiency:

Efficiency = (Useful Energy Output / Total Energy Input) × 100%

Given:

Efficiency = 90%

Useful Energy Output = 2700J

We need to calculate the Total Energy Input (how much energy the accumulator takes in). Rearranging the formula to solve for Total Energy Input, we get:

Total Energy Input = Useful Energy Output / Efficiency

Substitute the known values:

Total Energy Input = 2700J / 0.9

Calculate the input:

Total Energy Input = 3000J

Therefore, the accumulator takes in 3000J of energy.

Akọwa Nkọwa

Young's modulus, denoted by E, is a measure of the stiffness of a solid material. It is defined as the ratio of stress to strain in a material that is behaving elastically. Stress is the force applied per unit area, and strain is the deformation experienced by the material in response to the applied stress.

Let's break down the dimensions for Young's modulus:

Stress: Stress is defined as force per unit area. Thus, the dimension of stress can be expressed as:

Stress = Force / Area

The dimension of force is given by mass × acceleration, i.e., Force = MLT^-2 (where M is mass, L is length, and T is time).

The dimension of area is length × length = L².

Therefore, the dimension of stress is:

Stress = (MLT^-2) / (L²) = ML^-1T^-2

Strain: Strain is the ratio of the change in length to the original length and is dimensionless because it is a ratio of two lengths.

Thus, the dimension of strain is simply 1 (dimensionless).

Since Young's modulus is the ratio of stress to strain, its dimension is the same as that of stress. Therefore, the dimension of Young’s modulus E is:

ML^-1T^-2

Akọwa Nkọwa

To calculate the power of an object, we need to use the formula for power in terms of work done over time. The formula is:

Power (P) = Work Done (W) / Time (t)

First, let's find the work done on the object. Work done can be calculated using the formula:

Work Done (W) = Force (F) × Distance (d)

Given:

• Force (F) = 50 N
• Distance (d) = 500 cm = 5 m (Note: We need to convert the distance from centimeters to meters because the unit of force is in newtons, and 1 m = 100 cm)

Substituting the values into the formula for work done, we get:

Work Done (W) = 50 N × 5 m = 250 Joules

Next, we consider the time it took for the object to move this distance:

• Time (t) = 1 s

Now, substituting the work done and time into the power formula:

Power (P) = 250 Joules / 1 s = 250 Watts

Thus, the power of the object is 250 Watts.

Akọwa Nkọwa

To understand when a vapor is considered saturated, it is crucial to consider the rates of two significant processes: evaporation and condensation. **Evaporation** is the process where liquid molecules escape into the vapor phase, and its rate is denoted as **y**. On the other hand, **condensation** is the process where vapor molecules return to the liquid phase, with its rate denoted as **x**.

A vapor is said to be **saturated** when the rate of evaporation of the liquid is equal to the rate of condensation of the vapor. In simpler terms, the number of molecules leaving the liquid to become vapor is exactly equal to the number of molecules returning from the vapor to the liquid.

In mathematical terms, this condition can be described as **x = y**. Under this condition, the system reaches a dynamic equilibrium, and the vapor pressure of the system is at its maximum for the given temperature. At this point, the vapor cannot accommodate any more molecules, and thus, the vapor is in a saturated state.

Akọwa Nkọwa

Object distance (u) = -25 cm (negative because the object is in front of the mirror)
Image distance (v) = +5 cm (positive because the image is behind the convex mirror)

Using  1f $\frac{1}{f}$ = 1u $\frac{1}{u}$ + 1v $\frac{1}{v}$

1f $\frac{1}{f}$ = 1−25 $\frac{1}{-25}$ + 15 $\frac{1}{5}$

f = 254 $\frac{25}{4}$ = 6.250cm.

Akọwa Nkọwa

A monochromatic light is one that has a single wavelength or color. This means that it consists of light waves that all have the same frequency, resulting in a uniform appearance without any variation.

Akọwa Nkọwa

For Hare's apparatus

Relative density = hwhl $\frac{h_w}{h_l}$

Given: height of liquid = 0.5cm, height of water = 0.3cm

Relative density = 0.30.5 $\frac{0.3}{0.5}$ = 0.6

Akọwa Nkọwa

In a series resonant circuit, the current flowing in the circuit is at its maximum. Let me explain why:

In a series resonant circuit, we have a resistor (R), inductor (L), and capacitor (C) connected in series with an AC source. At a particular frequency called the resonant frequency, these circuits exhibit some unique characteristics. This resonant frequency is determined by the values of the inductor and capacitor and is given by the formula:

f₀ = 1 / (2π√(LC))

At the resonant frequency:

• The inductive reactance (X_L) and capacitive reactance (X_C) become equal in magnitude but opposite in phase. Thus, they cancel each other out.
• This causes the impedance (Z) of the circuit to be at its lowest value, equal to the resistance (R) of the circuit alone.
• Since impedance is at its minimum, according to Ohm’s law (V = IZ), the current through the circuit is at its maximum value for a given applied voltage.

Thus, in a series resonant circuit, when it is operating at its resonant frequency, the current flowing is at its maximum.

Akọwa Nkọwa

Upthrust(Force) = volume of object x density of liquid x g = V x ρ $\rho$ x g

U = 4.2 x 10−4 ${}^{-4}$ x  1028 x 10 ≊ $\approxeq$ 4.3N

Akọwa Nkọwa

The power of a lens is a measure of its ability to converge or diverge light. It is defined as the reciprocal (or inverse) of the focal length of the lens. The formula for calculating the power (P) of a lens in diopters (D) is given by:

P = 1/f

where:

• P is the power of the lens in diopters (D).
• f is the focal length of the lens in meters.

In this case, the focal length given is 20 cm. To apply the formula, we first need to convert this focal length into meters because the diopter is the reciprocal of the focal length in meters:

f = 20 cm = 0.20 m

Now, substitute the focal length in meters into the formula for power:

P = 1 / 0.20

P = 5.00 D

Thus, the power of the convex lens is 5.00 diopters. This indicates that the lens is capable of converging light at a distance of 5.00 meters.

Akọwa Nkọwa

To understand the concept of resonance in an electrical circuit, it is crucial to know that resonance occurs when the inductive reactance and capacitive reactance are equal in magnitude. This typically happens in a series RLC (Resistor, Inductor, Capacitor) circuit. At resonance, the impedance of the circuit is purely resistive, meaning the circuit behaves as if it only contains a resistor. As a result, the voltages across the inductor and capacitor can be compared at resonance.

In this particular situation, the voltage across the inductor (VL) and the voltage across the capacitor (VC) are of interest due to their roles in resonance:

• At resonance, the inductor and capacitor voltages are equal and opposite. This means that their magnitudes are the same, and they cancel each other out. Therefore, at resonance, VL = VC.

Thus, the correct expression of interest in relation to resonance is VL = VC, which indicates that the voltage across the inductor is equal in magnitude but opposite in phase to the voltage across the capacitor.

Akọwa Nkọwa

density of methanol =  800kgm−3 ${}^{-3}$ → 0.8gcm−3 ${}^{-3}$ 

At equilibrium, the density of methanol = the density of liquid x

ρ $\rho$ x h x g = ρ $\rho$x ${}_x$ x hx ${}_x$ x g

0.8 x 7.1 =  ρ $\rho$x ${}_x$ x  14.2

 ρ $\rho$x ${}_x$ = 0.8×7.114.2 $\frac{0.8\times 7.1}{14.2}$ = 0.4gcm−3 ${}^{-3}$ 

∴ $\therefore$, the relative density of liquid x = 0.4

Relative density of X = density of liquid xdensity of methanol $\frac{\text{density of liquid x}}{\text{density of methanol}}$ = 0.40.8 $\frac{0.4}{0.8}$ = 0.5

Akọwa Nkọwa

The process by which plants lose water to the atmosphere is called transpiration.

Transpiration is a fundamental process in the life of a plant. During this process, water is absorbed by the roots from the soil and is then transported through the xylem vessels in the stem and leaves. Once in the leaves, water evaporates into the atmosphere from the surface of tiny pores known as stomata.

Here's a simple breakdown of how transpiration works:

• Water from the soil enters plant roots.
• The water travels through the plant's vascular system (xylem) to reach the leaves.
• In the leaves, the water changes from liquid to vapor and exits through the stomata.

Transpiration is crucial for a number of reasons:

• It helps in the cooling of the plant, similar to how sweating cools our bodies.
• It enables the upward movement of water and minerals from the roots to the leaves.
• Transpiration plays a vital role in maintaining the water cycle within ecosystems.

Understanding transpiration is essential in fields like agriculture, where managing water resources efficiently can significantly impact plant growth and crop yield.

Akọwa Nkọwa

When selecting the best type of mirror for shaving, the key consideration is how the mirror reflects light and creates an image. For the purpose of shaving, it is important to have a mirror that magnifies the face and provides a clear view.

The best option for a shaving mirror is a concave mirror. Here is why:

• Magnification: A concave mirror curves inward, similar to the inside of a bowl. When you position your face close to a concave mirror, it produces an enlarged image, making it easier to see details while shaving.
• Focusing Light: Concave mirrors can focus light onto a specific point. This provides a bright and clear image, as the reflected light converges at a point in front of the mirror, enhancing visibility.
• Upright Image: When the object (your face) is placed between the mirror and its focal point, the image remains upright and enlarged. This is perfect for detailed activities like shaving.

Other types of mirrors, like convex and plane mirrors, and parabolic mirrors, do not provide the same level of magnification or focused reflecting properties, making them less suitable for shaving purposes.

Akọwa Nkọwa

The property by which a material returns to its original shape after the removal of force is called Elasticity.

Let's break it down:

Elasticity: This is a property of a material that allows it to return to its original shape or size after the force that caused deformation is removed. Think of a rubber band—you can stretch it, but once you let it go, it snaps back to its initial shape.

Ductility: This property refers to a material's ability to be stretched into a wire. For example, materials like copper are ductile because they can be drawn into thin wires without breaking.

Malleability: This is a material's ability to withstand deformation under compressive stress. It is the property that allows metals to be hammered or rolled into thin sheets. Gold is a good example of a malleable metal.

Plasticity: This property describes the material's ability to undergo permanent deformation without breaking. When a plastic region is reached, the material will not return to its original shape after the removal of force.

Therefore, when we speak of a material returning to its original shape after the removal of force, we are specifically referring to Elasticity.

Akọwa Nkọwa

The velocity ratio of a machine is a concept used to explain how much the machine is expected to amplify the input motion. If the velocity ratio of a machine is 4, it means that the distance moved by the effort is 4 times greater than the distance moved by the load.

To understand this concept better, consider what a machine does: it allows you to apply a small effort over a longer distance to move a heavy load over a shorter distance. In this scenario, if the velocity ratio is 4, then for every 4 meters (or units of distance) you exert effort, the load will move 1 meter (or unit of distance).

Akọwa Nkọwa

The thermal conductivity of a material is a measure of its ability to conduct heat. It is defined by the formula:

Q = k × A × ΔT/Δx × t

Where:

• Q is the heat energy conducted (in Joules)
• k is the thermal conductivity (in W/mK)
• A is the area through which heat is conducted (in square meters, m²)
• ΔT is the temperature difference (in Kelvin or Celsius, since a difference in degrees Celsius is equivalent to a difference in Kelvin)
• Δx is the thickness of the material (or the distance over which the temperature difference occurs, in meters)
• t is the time taken (in seconds)

We are given:

• Q = 288,000 J (since energy is in KJ and 1KJ = 1,000J)
• ΔT/Δx = 90 ºC/m (temperature gradient)
• t = 7,200 s

The cube has each side measuring 3 meters, so the area A of one face (since heat is conducted across two opposite faces, effectively using one face area for calculation) is:

A = 3m × 3m = 9 m²

Now, we need to solve for k (thermal conductivity):

Q = k × A × ΔT/Δx × t

288,000 J = k × 9 m² × 90 ºC/m × 7,200 s

k = 288,000 / (9 × 90 × 7,200)

Calculate the denominator:

9 × 90 × 7,200 = 5,832,000

Therefore:

k = 288,000 / 5,832,000 ≈ 0.0493 W/mK

This converts approximately to 4.93 × 10^-2 W/mK.

Therefore, the correct answer is 4.9 × 10^-2 W/mK.

Akọwa Nkọwa

When you push a wheelbarrow inclined at an angle to the horizontal, the applied force can be divided into two components: a **horizontal component** and a **vertical component**. To find the horizontal component of the force, you need to use the concept of resolving vectors.

The force of 150N is acting at an angle of 60º to the horizontal. The horizontal component of this force can be calculated using the cosine of the angle. The formula to determine the horizontal component \( F_{\text{horizontal}} \) is given by:

F_horizontal = F_applied \times \cos(\theta)

Where:

• F_applied is the magnitude of the applied force, which is 150N.
• \(\theta\) is the angle of inclination to the horizontal, which in this case is 60º.

Substitute the values into the formula:

F_horizontal = 150N \times \cos(60º)

We know that \(\cos(60º)\) equals 0.5.

Therefore:

F_horizontal = 150N \times 0.5 = 75N

Thus, the **horizontal component** of the applied force is 75N.

Akọwa Nkọwa

The phenomenon of land and sea breeze is primarily attributed to convection.

To understand this, let's first look at what land and sea breezes are:

Land Breeze: At night, the land cools down faster than the sea. The cooler, denser air from the land moves towards the sea, and this is known as a land breeze.

Sea Breeze: During the day, the land heats up more quickly than the sea. The warmer, lighter air over the land rises, and the cooler air from the sea moves in to take its place. This movement of air from the sea to the land is known as a sea breeze.

Both of these processes involve the movement of air due to differences in temperature and density, which is essentially the process of convection.

Convection is the transfer of heat through a fluid (like air or water) and is responsible for moving air masses and creating these breezes. The warm air, being less dense, rises, and the cooler, denser air moves in to replace it.

In contrast, conduction is the transfer of heat through a solid material, and radiation is the transfer of heat in the form of electromagnetic waves, neither of which primarily drive the processes of these breezes, making convection the key player.

Akọwa Nkọwa

In a galvanometer setup intended to measure voltages, you often encounter a configuration known as a voltmeter, where a resistor is added in series with the galvanometer to increase its range of measurement.

The basic principle is that the total resistance of the voltmeter (comprising the galvanometer's resistance and the additional series resistor) allows it to handle a higher voltage by limiting the current that flows through the galvanometer. The maximum voltage (V) that can be measured by the galvanometer is determined by Ohm's Law: V = I * R,

Where:

• V is the maximum voltage (40V in this case),
• I is the full scale current rating of the galvanometer,
• R is the total resistance needed so that the galvanometer is not damaged.

Assuming the galvanometer has a known internal resistance (G) and a known full-scale current (I_fullscale), the resistance R required in series can be calculated via the formula:

R = (V / I_fullscale) - G

For this solution, you need either the values of G and I_fullscale or their product (G * I_fullscale). Without those exact specifications provided, it would be imprudent to give an exact numeric answer.

However, if this is a typical example and you have a typical galvanometer with a full-scale current of 50 μA and an internal resistance of 500 Ω, you can compute:

R = (40 / 50 x 10^-6) - 500 = 2000 - 500 = 1500 Ω

Therefore, you would need an additional R = 1990 Ω - 1500 Ω = 490 Ω, meaning the closest possible practical value from your choices is 1990 Ω (including the internal resistance).

If the specific parameters of the galvanometer differ, adjust the calculation accordingly, but the general process is as laid out here.

Akọwa Nkọwa

To calculate the quantity of heat absorbed or released by a substance, we can use the formula:

Q = C × ΔT

where:

• Q is the quantity of heat.
• C is the thermal capacity of the substance.
• ΔT is the change in temperature.

Given:

• C = 400 J/°C
• Initial temperature = 60°C
• Final temperature = 80°C

First, calculate the change in temperature:

ΔT = Final temperature - Initial temperature = 80°C - 60°C = 20°C

Now, substitute the values into the formula to find the quantity of heat:

Q = 400 J/°C × 20°C

Calculate the answer:

Q = 8000 J

Since the options provided are in kilojoules (KJ), we need to convert joules (J) to kilojoules (1 KJ = 1000 J):

Q = 8000 J ÷ 1000 = 8 KJ

Therefore, the quantity of heat for the copper rod, given the specified conditions, is 8 KJ.

Akọwa Nkọwa

To solve this problem, we need to understand the relationship between tension and frequency in a sonometer wire. The frequency of a vibrating string, such as one in a sonometer, is directly proportional to the square root of the tension in the string. Mathematically, this relationship is expressed as:

f ∝ √T

Where f is the frequency and T is the tension. In the given problem, the original frequency is 50 Hz, and the tension is increased to four times its original value. Let's analyze how this change in tension affects the frequency:

- Original tension = T

- New tension = 4T

Substitute the new tension into the formula:

f_new = 50 Hz × √(4T/T)

Simplify the equation:

f_new = 50 Hz × √4

f_new = 50 Hz × 2

f_new = 100 Hz

Thus, when the tension is four times the original tension, the new frequency of the sonometer's fundamental note becomes 100 Hz.

Akọwa Nkọwa

During the process of glycolysis, a single glucose molecule is broken down into two molecules of pyruvate. During this metabolic pathway, there is a net gain of adenosine triphosphate (ATP) molecules. To understand how many ATP molecules are produced, let's break it down step by step.

1. **Initial ATP Investment:** Glycolysis initially requires an investment of 2 ATP molecules to phosphorylate glucose and convert it into a more reactive form during the early stages of the glycolytic pathway.

2. **ATP Production:** As glycolysis progresses, a total of 4 ATP molecules are produced. This occurs in the later steps of the pathway where adenosine diphosphate (ADP) is phosphorylated to form ATP. This is known as substrate-level phosphorylation.

3. **Net ATP Gain:** To find out the net gain of ATP through glycolysis, simply subtract the initial ATP investment from the total ATP produced:

Net ATP = Total ATP produced - Initial ATP investment

Net ATP = 4 ATP - 2 ATP

Net ATP = 2 ATP

Thus, the net total number of ATP produced during glycolysis is 2 molecules.

Akọwa Nkọwa

The average translational kinetic energy of gas molecules is directly related to the temperature of the gas. This relationship is based on the principles of kinetic molecular theory, which explains the behavior of gas molecules in terms of their motion.

Let's break this down simply:

1. Temperature and Kinetic Energy:

The average translational kinetic energy of gas molecules is given by the equation:

\( KE_{avg} = \frac{3}{2} k_B T \)

where \( KE_{avg} \) is the average translational kinetic energy, \( k_B \) is the Boltzmann constant, and \( T \) is the absolute temperature in Kelvin. This formula shows that the kinetic energy is directly proportional to the temperature.

2. What This Means:

As the temperature of a gas increases, the molecules move faster, which increases their translational kinetic energy. Conversely, as the temperature decreases, the molecules slow down, resulting in lower kinetic energy.

It is important to note that this relation is independent of the pressure and the number of moles of the gas. While pressure and the number of moles do affect the overall behavior of a gas, they do not directly influence the average translational kinetic energy of individual molecules.

Therefore, the correct explanation is that the average translational kinetic energy of gas molecules depends on temperature only.

Akọwa Nkọwa

apacitance in parallel = one at the top + one under = 2C

The two in the middle are in series = C2 $\frac{C}{2}$

The equivalent capacitance of the capacitors in the circuit above = C2 $\frac{C}{2}$ + 2C = 52 $\frac{5}{2}$C

Akọwa Nkọwa

To find the area expansivity of a metal when given its cubic expansivity, you should understand the relationship between linear, area, and cubic expansivity.

Cubic expansivity (\( \beta \)) is defined as the fractional change in volume per change in temperature, and is given by the formula:

\[ \Delta V = \beta V \Delta T \]

Area expansivity (\( \alpha_{A} \)) corresponds to the fractional change in area per change in temperature and can be derived from the linear expansivity (\( \alpha \)). The relationship between these expansivities is as follows:

\[ \text{Area Expansivity (\( \alpha_{A} \))} = 2 \times \text{Linear Expansivity (\( \alpha \))} \]

The cubic expansivity (\( \beta \)) is related to the linear expansivity by:

\[ \text{Cubic Expansivity (\( \beta \))} = 3 \times \text{Linear Expansivity (\( \alpha \))} \]

Thus, based on these relationships, we can express the area expansivity in terms of the cubic expansivity:

\(\text{Area Expansivity (\( \alpha_{A} \))} = \frac{2}{3} \times \text{Cubic Expansivity (\( \beta \))}

Given that the cubic expansivity \( \beta \) is \( 3.9 \times 10^{-6} \, \text{K}^{-1} \):

The area expansivity can be calculated as follows:

\[ \text{Area Expansivity (\( \alpha_{A} \))} = \frac{2}{3} \times 3.9 \times 10^{-6} \, \text{K}^{-1} = 2.6 \times 10^{-6} \, \text{K}^{-1} \]

Therefore, the **correct answer** is **2.6 x 10^{-6} K^{-1}**.

Akọwa Nkọwa

The elliptical shape of the Earth: The Earth is not a perfect sphere; it is slightly flattened at the poles and bulging at the equator. This shape causes variations in gravitational acceleration.

Akọwa Nkọwa

To determine the angular velocity of a body whirled in a horizontal circle at a rate of 800 revolutions per minute (rpm), we need to convert this to the standard unit of angular velocity, which is radians per second (rad/s).

Here’s how you can calculate it:

• First, understand that one complete revolution is equal to 2π radians.
• The body completes 800 revolutions in one minute.

Now let's perform the conversion:

• Convert the revolutions per minute to revolutions per second:
• \( \frac{800 \text{ revolutions}}{1 \text{ minute}} \times \frac{1 \text{ minute}}{60 \text{ seconds}} = \frac{800}{60} \text{ revolutions per second} \), which simplifies to approximately \( 13.33 \text{ revolutions per second} \).
• Convert revolutions to radians by multiplying by \(2π\) radians per revolution:
• \( 13.33 \text{ revolutions per second} \times 2π \text{ radians per revolution} = 26.66π \text{ radians per second} \).

Rounding up the decimal to a consistent significant figure, the angular velocity is approximately 26.7π radians per second.

Akọwa Nkọwa

To calculate the monthly electrical bill, we first need to determine the total energy consumption of the household in kilowatt-hours (kWh). Here are the steps:

1. Calculate the total power consumption of the appliances daily:

• The appliances' power ratings are 80W, 100W, and 120W.
• Total power consumption: 80W + 100W + 120W = 300W.

2. Convert the daily power consumption from Watts to kilowatts (kW):

• Since 1kW = 1000W, the daily power consumption in kW is 300W / 1000 = 0.3 kW.

3. Calculate the energy used daily in kWh:

• The appliances are used for 6 hours daily.
• Energy used daily: 0.3 kW * 6 hours = 1.8 kWh.

4. Calculate the monthly energy consumption:

• An average month is 31 days.
• Monthly energy consumption: 1.8 kWh/day * 31 days = 55.8 kWh.

5. Calculate the cost based on the rate:

• The cost of electricity is ₦24.08 per kWh.
• Monthly electricity cost: 55.8 kWh * ₦24.08 = ₦1343.664.

Therefore, the monthly electrical bill is approximately ₦1343.66k.

Akọwa Nkọwa

To determine the Mechanical Advantage (MA) of a machine, we use the formula:

MA = Load / Effort

Here, the Load is the weight of the mass being lifted, and the Effort is the force applied on the machine.

First, we need to calculate the Load. The Load is obtained by multiplying the mass of the object by the acceleration due to gravity (g = 10 m/s²).

So, the Load (weight of the mass) is:

Load = Mass × Gravity = 60 kg × 10 m/s² = 600 N

The Effort given is 40 N.

Now, we can calculate the Mechanical Advantage:

MA = Load / Effort = 600 N / 40 N = 15

Therefore, the Mechanical Advantage of the machine is 15.

Akọwa Nkọwa

A rainbow is formed through a combination of three processes: reflection, refraction, and dispersion. Let's break down each process to understand how a rainbow forms:

1. Refraction: When sunlight enters a raindrop, it bends or changes direction. This bending of light is known as **refraction**. Different colors of sunlight bend by different amounts because they have different wavelengths.

2. Reflection: Once inside the raindrop, the light gets reflected off the inside surface of the drop. This reflection sends the light back out of the raindrop at different angles.

3. Dispersion: As the light exits the raindrop, it bends again (refraction). Because each color bends by a different amount, the sunlight is spread out into its component colors, creating a spectrum. This spreading into a spectrum is called **dispersion**.

All three processes contribute to the formation of a rainbow. The combination of **refraction, reflection, and dispersion** results in the beautiful arc of colors that we see in the sky.

Akọwa Nkọwa

An ideal transformer is a hypothetical concept used in electrical engineering to simplify the analysis of real transformers. In an ideal transformer, several assumptions are made to avoid losses and inefficiencies. Here's what an ideal transformer has:

No flux leakage: In an ideal transformer, it is assumed that all the magnetic flux generated in the primary coil is perfectly linked with the secondary coil. This means there is no flux leakage. This assumption ensures maximum efficiency, as all the energy is transferred from the primary to the secondary coil without losses.

Let's briefly discuss the other concepts to understand why they don't pertain to an ideal transformer:

Maximum primary resistance: In an ideal transformer, the resistance of the windings is assumed to be zero. If the primary has maximum resistance, it would result in power loss due to the resistance, contradicting the idea of an ideal transformer.

Hysteresis: This refers to the energy loss that happens in the core material due to the cyclic magnetization and demagnetization processes. An ideal transformer assumes there is no hysteresis loss, meaning the core material does not absorb any energy during these cycles.

Eddy current: These are loops of electric current induced within conductors by a changing magnetic field, which can cause significant energy loss. In an ideal transformer, it is assumed that there are no eddy currents, hence no energy loss due to this effect.

In summary, an ideal transformer is characterized by having no flux leakage, and it assumes that there are no losses due to resistance, hysteresis, or eddy currents. This makes the ideal transformer a perfect, lossless device for the purposes of theoretical analysis.

Akọwa Nkọwa

Bifocal lenses are primarily used to correct the eye defect known as presbyopia. As people age, the lens of the eye naturally loses its flexibility, making it difficult to focus on objects that are close up. This condition is known as presbyopia. A bifocal lens is designed with two different optical powers to accommodate this need. The upper part of the lens is usually crafted for distance vision, while the lower segment is designed for near vision tasks, such as reading.

Astigmatism is a different eye condition caused by irregular curvature of the cornea or lens, resulting in blurred or distorted vision at all distances. This condition is typically corrected with cylindrical lenses rather than bifocals.

Hypermetropia, commonly known as farsightedness, is a condition where distant objects can be seen more clearly than near ones. Simple convex lenses are usually used for this correction.

Myopia, or nearsightedness, is a condition where nearby objects are seen clearly, while distant objects appear blurry. Concave lenses are generally used to correct this condition.

In summary, bifocal lenses are specifically designed to address the challenges of focusing at different distances simultaneously, making them ideal for managing presbyopia.

Akọwa Nkọwa

To calculate the distance between two objects based on the gravitational force acting between them, we need to use the formula for gravitational force:

F = (G * m1 * m2) / r²

Where:

• F is the gravitational force between the two masses (6.67 N).
• G is the gravitational constant (6.6 x 10^-11 Nm²/kg²).
• m1 is the first mass (10²⁴ kg).
• m2 is the second mass (10²⁷ kg).
• r is the distance between the centers of the two masses.

We need to compute r by rearranging the formula:

r² = (G * m1 * m2) / F

Therefore, the distance r is:

r = √((G * m1 * m2) / F)

Substitute the given values into the equation:

r = √((6.6 x 10^-11 Nm²/kg² * 10²⁴ kg * 10²⁷ kg) / 6.67 N)

Calculating inside the square root:

G * m1 * m2 = 6.6 x 10^-11 * 10²⁴ * 10²⁷ = 6.6 x 10⁴⁰ Nm²

Then divide by the force:

6.6 x 10⁴⁰ Nm² / 6.67 N = 0.99 x 10⁴⁰ m²

Finally, calculate the square root:

r = √(0.99 x 10⁴⁰)

r ≈ 1.0 x 10²⁰ m

Therefore, the distance between the two objects is approximately 1.0 x 10²⁰ m.

Akọwa Nkọwa

When a body moves in a straight line from one point, such as point P, to another point, such as point Q, the motion is called Translational Motion. This kind of motion refers to an object moving along a path in which every part of the object takes the same path as a reference point. This means that if you follow any point on the body, it covers the same amount of distance in the same time frame as any other point.

Let's break down the other options:

• Rotational Motion: This occurs when an object spins around an internal axis. For example, the rotation of the Earth on its axis is a rotational motion.


• Simple Harmonic Motion: This is a type of periodic motion where the restoring force is directly proportional to the displacement. An example of this is a pendulum swinging back and forth.


• Circular Motion: This occurs when an object moves along a circular path. For instance, the motion of the planets around the sun is circular motion.

In conclusion, since the body is moving from point P to point Q along a straight line, it exhibits Translational Motion.