WAEC SSCE - Geography - 1999

The most common environmental problem in the Niger Delta is

Détails de la réponse

The most common environmental problem in the Niger Delta is coastal flooding. This is due to several factors such as rising sea levels, heavy rainfall, and poor drainage systems. The Niger Delta is a low-lying region with many coastal communities, making it vulnerable to flooding. Flooding can cause damage to homes, crops, and infrastructure, leading to displacement, food insecurity, and economic losses. Additionally, flooding can lead to environmental degradation, including oil spills, which further exacerbate the problems faced by the people of the Niger Delta.

Which of the following forms of pollution is the least harzardous to man ??

Détails de la réponse

Among the given options, the least hazardous form of pollution to man is "A sound of 50 decibels in the air." Sound pollution is the presence of unwanted sound that can harm human health and the environment. A sound of 50 decibels is considered to be in the range of normal conversation or background noise, which is relatively harmless to humans. On the other hand, toxic waste disposed in rivers can pollute the water and harm aquatic life, and chemicals used for fishing can accumulate in the food chain and harm both animals and humans. Flaring of gas from refineries can release harmful gases into the air, causing air pollution and posing health risks to people living nearby.

Vegetation resources can be utilized by man for all the following except

Détails de la réponse

If the temperature of sea level is 30⁰C the temperature of the air at a height of 2000 meters will be approximately

Détails de la réponse

The instrument used for measuring wind velocity is called

Détails de la réponse

The instrument used for measuring wind velocity is called an anemometer. An anemometer is a device that measures the speed and direction of the wind. It has several cups mounted on arms that rotate when the wind blows, and the rotation is translated into wind speed. Anemometers come in various forms, including mechanical, electric, and sonic anemometers. The measurement of wind speed is essential for weather forecasting, aviation, sailing, and many other fields.

In which of the following regions would exfoliation commonly occur?

Détails de la réponse

Exfoliation is a type of weathering process in which curved plates of rock are stripped from rock surfaces due to release of pressure on the underlying rocks. This commonly occurs in regions with large diurnal range of temperature such as semi-arid regions. This is because, during the day, rocks expand due to heat and contract during the night due to cooling. The repeated expansion and contraction of rocks over time causes them to weaken, crack and eventually shed the outer layers of rocks. Hence, the answer is: Semi-arid regions with large diurnal range of temperature.

A megalopolis is a

Détails de la réponse

A megalopolis is a continuous amalgamation of a series of cities. It refers to a large urbanized region that comprises several cities or metropolitan areas, which are closely situated and physically linked together. The individual cities in a megalopolis tend to grow and merge with each other over time, resulting in a vast, interconnected urban area with a very high population density. The term is often used to describe areas such as the Northeast megalopolis in the United States, which includes cities like New York, Boston, and Philadelphia, among others.

Which of the following ocean currents lowers the temperature of the adjacent coastland ?

Détails de la réponse

The ocean current that lowers the temperature of the adjacent coastland is the Benguela current. The Benguela current is a cold ocean current flowing from south to north along the western coast of southern Africa. It is caused by upwelling of cold water from the depths of the Atlantic Ocean. As the current moves northward, it cools the warm air coming from the interior of the continent, resulting in a cold, dry climate along the coast. The Benguela current is known for its rich marine life and supports one of the most productive fishing grounds in the world.

The bulk of Nigeria's timber is exploited from the

Détails de la réponse

The bulk of Nigeria's timber is exploited from the rainforest. The rainforest is a dense forest characterized by high rainfall and a variety of broad-leaved evergreen trees. Nigeria's rainforest is located in the southern part of the country, and covers a significant portion of the Niger Delta region, as well as parts of Cross River, Akwa Ibom, and Ondo states. The rainforest provides a habitat for a variety of flora and fauna, and is a major source of timber, which is used for furniture, construction, and other purposes. Due to illegal logging and deforestation, the rainforest is under threat, and there are efforts to protect and conserve this valuable ecosystem.

Atmospheric resources can used for all the following except

Détails de la réponse

The manufacturing of textiles and garments is most popular in

Détails de la réponse

Most of the copper exported from the Democratic Republic of Congo (Zaire) is produced in and around

Détails de la réponse

The answer is Lubumbashi. Lubumbashi is a city in the southeastern part of the Democratic Republic of Congo (DRC), which is known for its rich copper deposits. It is the center of copper mining in the Katanga Province and the surrounding region, producing a large percentage of the copper exported by the country. Therefore, most of the copper exported from the DRC is produced in and around Lubumbashi.

Marble and Schist are examples of

Détails de la réponse

Marble and Schist are examples of metamorphic rocks. Metamorphic rocks are formed by the transformation of existing rock types through heat, pressure, and chemical processes, typically deep within the Earth's crust. Marble is formed from limestone that has been subjected to high temperatures and pressures, while Schist is formed from shale that has been metamorphosed due to heat and pressure. These rocks exhibit unique patterns and textures due to the conditions under which they were formed, and are used in various industries, including construction and sculpture.

Koppen's wet tropical (AF) type of climate is experienced in West Africa in

Détails de la réponse

Which of the following natural resources is non-renewable?

Détails de la réponse

Minerals are non-renewable natural resources. This is because minerals are naturally occurring substances found in the earth's crust and once they are extracted, they cannot be replaced. The process of mineral formation takes millions of years, and human activities such as mining and extraction have accelerated the depletion of these resources. Some examples of non-renewable minerals include oil, coal, and gold. On the other hand, soil, vegetation, and wildlife are renewable resources that can be replenished over time through natural processes.

The likely harzards to shipping at the North American end of the North Atlantic sea route are

Détails de la réponse

The North Atlantic sea route, which stretches from Europe to North America, is a major shipping route that has some potential hazards. One of the likely hazards at the North American end of the route is fog. The region is notorious for its thick fog that reduces visibility and makes navigation difficult for ships. Another likely hazard is iceberg. The area is known to have icebergs that break away from the Arctic ice cap and float southward. These icebergs can damage or sink ships, especially those that are not ice-reinforced. It is important for ships to be aware of these hazards and take necessary precautions while navigating the route to ensure safe travel.

Which of the following soil types that support the tropical rainforest?

Détails de la réponse

The earth lies between

Détails de la réponse

The earth lies between Venus and Mars.

Industries are classified as

Détails de la réponse

Industries are classified into different types based on their function and output. The most common classification of industries is into primary, manufacturing (also known as secondary), and tertiary industries. Primary industries are involved in the extraction and production of raw materials such as mining, farming, and fishing. These industries are the basis of all other industries because they provide the raw materials needed for production. Manufacturing or secondary industries involve the transformation of raw materials into finished products such as cars, textiles, and electronics. These industries add value to the raw materials obtained from the primary industries. Tertiary industries are also known as service industries and include businesses such as banking, transportation, and healthcare. These industries provide services to people and other industries. Other classifications of industries can include cocoa processing, furniture making, and food processing, but these are usually considered as subcategories of manufacturing or primary industries.

If A is located on latitude 6 0N and B on latitude 12N, what is the distance between the two places?

Détails de la réponse

The separation of ancient Gondwana land into different land masses was caused mainly by

Détails de la réponse

The separation of ancient Gondwana land into different land masses was mainly caused by continental drift. Millions of years ago, there was a single landmass called Pangaea, which later split into two: Laurasia and Gondwana. Gondwana eventually split into South America, Africa, Australia, India, and Antarctica. This splitting was caused by the movement of tectonic plates, which gradually separated the land masses over millions of years.

The feature commonly found along the lower course of a river are

Détails de la réponse

The features commonly found along the lower course of a river are meanders. Meanders are bends or curves in a river that are caused by the lateral erosion of the riverbanks. They are usually found in the lower course of a river where the gradient is lower, and the river has more energy to erode sideways rather than downwards. Meanders can form oxbow lakes when the river erodes through the narrow neck of a meander and takes a shorter, straighter course.

All the following condition are favourable for the formation of delta except

Détails de la réponse

A delta is a landform that is created at the mouth of a river when it flows into a standing body of water, such as a sea or an ocean. The formation of a delta requires specific conditions to be present. Therefore, the question is asking which of the following conditions is not favorable for the formation of a delta. The correct answer is "presence of large lakes in the river course." This condition is not favorable for the formation of a delta because a lake has still water, and it will not provide enough force to carry the sediments downstream to form a delta. In contrast, a river flowing into a standing body of water with enough force to transport and deposit sediments creates a delta. Therefore, options "availability of adequate sediments," "absence of strong current at the river mouth," and "presence of sheltered coast" are favorable conditions for the formation of a delta.

Which of the following is responsible for the formation of block mountains?

Détails de la réponse

Block mountains are created by faulting. Faulting is the process of breaking and displacement of rock layers due to tensional or compressional forces. When one block of rock is pushed upwards and another block is pushed downwards, a block mountain is formed. The uplifted block is called a horst and the lowered block is called a graben. As the blocks continue to move, they can create a series of parallel mountains and valleys known as horsts and grabens. This process is common in regions of tectonic activity such as the East African Rift Valley and the Rocky Mountains in the United States.

A steep-side feature with vertical bands of alternate hard arid soft rocks, aligned in the direction of the prevailing winds is

Détails de la réponse

The correct answer is Yardang. Yardang is a landform created by wind erosion. It consists of a steep-sided and elongated ridge with a sharp crest, formed by the erosion of alternating layers of hard and soft rock, aligned with the prevailing wind direction. The softer rocks are eroded more quickly, leaving behind the harder rocks standing high and forming the crest of the ridge. Therefore, a steep-side feature with vertical bands of alternate hard and soft rocks, aligned in the direction of the prevailing winds is a Yardang.

Equatorial lowlands usually experience

Détails de la réponse

Equatorial lowlands are regions near the equator with low altitude. These regions typically experience heavy thunderstorms and rainfall in the afternoon due to the intense solar heating of the land and oceans, which causes rising air and the subsequent condensation of water vapor into rain. This phenomenon is known as convectional rainfall. Therefore, the correct answer is "heavy thunder rains in the afternoons."

The Logas-Kano railway crosses the River Niger at

Détails de la réponse

The removal of soil or rocks particles by wind or running water is called

Détails de la réponse

The correct answer is erosion. Erosion is the process by which soil or rock particles are removed and transported by natural agents like wind or water. Wind erosion occurs in arid and semi-arid areas where there is little vegetation to protect the soil. Running water erosion occurs in areas with high rainfall or where the land is sloping, and the force of the water removes soil and rock particles.

The Akwapim-Togo Ridge is a continuation of the

Détails de la réponse

Nigeria's major trading partners include

Détails de la réponse

Nigeria's major trading partners are the countries that engage in the highest volume of trade activities with Nigeria. These countries are involved in importing and exporting goods and services to and from Nigeria. Based on the options provided, the correct answer is (a) Britain, USA, Germany, and Japan. These countries are among the top exporters of goods and services to Nigeria, and Nigeria also exports to them. The United Kingdom, United States, Germany and Japan are among the largest economies in the world and have a significant influence on the global trade system. As such, Nigeria's trade relationship with these countries has a significant impact on its economy.

The greatest advantage of pereninnial irrigation is that

Détails de la réponse

(a) What is a conurbation?

(b) Name one conurbation each in three different countries

(c) State four problems of a conurbation

(d) Suggest any three solutions to the problems mentioned in (c) above

Détails de la réponse

None

 (a) Distinguish between weather and climate

(b) Identify and describe any four elements of weather

(c) Mention three uses of rainfall data to man
 

Détails de la réponse

None

(a) On a sketch map of Nigeria, locate and name:
(i) two game reserves
(ii) one important town in each of the areas in (a) above

(b) State three ways by which tourism has affected the lives of the people in any one of the areas identified in (a) above

(c) Suggest three ways by which tourism may be boosted in Nigeria 
 

Détails de la réponse

None

Using specific examples, describe how each of the following factors affect the vegetation of Africa;

(a) Rainfall (b) Altitude (c) Soil type 
 

Détails de la réponse

None

Write a geographical account of irrigation farming in Nigeria under the following headings:

(a) Factors that favour the type of agriculture

(b) Major farming areas and associated crops

(c) Problems 

Détails de la réponse

None

(a) State three ways in which human activities affect the composition of the atmosphere

(b) Describe the physical changes that are likely to be associated with the increasing reduction of the ozone layer in the upper atmosphere 
 

Détails de la réponse

None

(a) Describe the features of plantation agriculture in Africa

(b) In what four ways has plantation agriculture contributed to the economic development of African countries?

(c) Outline four problems of plantation agriculture 
 

Détails de la réponse

None

(a) With the aid of annotated diagram, describe the various stages of a river course

(b) Mention four ways in w rivers are of importance to man

Détails de la réponse

None

Study the map extract on a scale 1:50,000 and answer the following questions

(a) On the map
(i) Write the letter in brackets over an example of each of the following features: a Knoll(K), a sand deposit (SD), a disappearing stre (DS),
(ii) Shade clearly the area in the northeast, above 925 feet

(b) In your answer book:
(i) Calculate the distal of the secondary road in the map
(ii) Suggest the type of rock that dominates the region of disappearing stream What is the possible industry that may be sited in the region if the rock is found in commercial quantity?

(c) Describe the effects of relief and drainage of the mapped area on the
(i) communication pattern
(ii) settlement pattern 

(d) Suggest with reasons, three possible occupations of the people in the area 
 

Détails de la réponse

None

(a) Describe the factors which favour the development of hydro-electric power (HEP) resources

(b) State the benefits of hydro-electric power supply to the people of Nigeria

(c) Outline three major problems facing the development of HEP in Nigeria 
 

Détails de la réponse

None

State with specific examples, how each of the following factors affect(s) the climate of adjacent coastlands:

(a) Winds (b) Ocean currents (c) Distance from the sea 

Détails de la réponse

None

 (a) Name the three types of rainfall

(b) With the aid of relevant diagrams describe the formation and characteristics of any two types named in (a) above
 

Détails de la réponse

None

(a) For any two of the following countries: Nigeria, Ghana, Sierra Leone and The Gambia, list
(i) two commodities exported to countries outside West Africa
(ii) two commodities imported from those foreign countries

(b) Choose one of the countries in (a) above and name three of its most active foreign customers

(c) What four measures can a country which experiences Unfavourable balance of trade take to remedy the situation? 

Détails de la réponse

None

(a) On a sketch map of Nigeria, locate and name three vegetation zones, choosing at least one from each of the two broad belts

(b) Relate the characteristics of the vegetation to the climate of one of the vegetation zones in (a) above

(c) List two major agricultural produce from any two of the zones shown in (a) above 
 

Détails de la réponse

None

(a) With the aid of suitable diagrams, describe the appearance and formation of any two of the following landforms 
(i) delta (ii) river capture (iii) waterfall (iv) inselberg

(b) Show one way in which each of the two features in (a) above is of importance to man
 

Détails de la réponse

None

(a) Describe the characteristics of the cool temperate grasslands

(b) Outline five factors which affect the distribi of this vegetation type 
 

Détails de la réponse

None

(a) Using specific examples, describe any four factors influencing the location of manufacturing industries in developing countries

(b) Outline four problems associated with the establishment of heavy industries in West Africa

(c) Suggest solution to these problems 
 

Détails de la réponse

None