WAEC SSCE - Chemistry - 2015

The negatively charged particle in an atom is the

Antwortdetails

The negatively charged particle in an atom is the electron. Electrons are subatomic particles that orbit around the nucleus of an atom in shells or energy levels. They have a negative charge, which is equal in magnitude to the positive charge of a proton. Electrons are responsible for chemical bonding and the formation of ions in chemical reactions.

Consider the following reaction equation:
CuO_(s) + H_2(g) \(\to\) Cu_(s) + H₂O₍₁₎

Which substance is oxidized?

Antwortdetails

In the given reaction equation, CuO reacts with H₂ to form Cu and H₂O. Here, CuO is reduced to Cu and H₂ is oxidized to H₂O. So, the substance that is oxidized in the reaction is H₂.

Solubility is practically applied in

Antwortdetails

Solubility is practically applied in solvent extraction. Solubility refers to the ability of a substance to dissolve in a given solvent. Solvent extraction is a process that uses solubility to separate a specific substance from a mixture. In this process, a substance is dissolved in a solvent that selectively dissolves the desired compound, leaving behind unwanted impurities. This technique is widely used in the chemical, pharmaceutical, and mining industries for the extraction and purification of various compounds.

Consider the following reaction equation:
C2H4(g) + 3O2(g) \(\to\) 2CO2(g) + 2H2O(g)

The volume of CO2(g) produced at s.t.p when 0.05 moles of C2H4(g) was burnt in O2(g) is
[Molar Volume of gas = 22.4dm3

Antwortdetails

The balanced chemical equation is: C2H4(g) + 3O2(g) -> 2CO2(g) + 2H2O(g) From the equation, we can see that 1 mole of C2H4 produces 2 moles of CO2. Therefore, 0.05 moles of C2H4 will produce: 2 x 0.05 = 0.1 moles of CO2 Now we need to find the volume of 0.1 moles of CO2 at s.t.p. The molar volume of gas at s.t.p. is 22.4 dm3. So, the volume of 0.1 moles of CO2 at s.t.p. will be: 0.1 x 22.4 = 2.24 dm3 Therefore, the volume of CO2 produced at s.t.p when 0.05 moles of C2H4 was burnt in O2 is 2.24 dm3. Hence, the correct option is (b) 2.24 dm3.

The general gas equation was deprived from______?

Antwortdetails

The general gas equation, also known as the ideal gas law, was derived from Boyle's and Charles' laws. Boyle's law states that the pressure of a gas is inversely proportional to its volume, while Charles' law states that the volume of a gas is directly proportional to its temperature. The general gas equation combines these two laws along with Avogadro's law, which states that equal volumes of gases under the same conditions of temperature and pressure contain the same number of molecules. The equation is PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature in Kelvin.

A metallic ion Z²⁺ with an inert gas structure contains 18 electrons. How many protons are contained in this ion?

Antwortdetails

Consider the following reaction equation:
SO₄^2-_(aq) + 2H⁺_(aq) + ye^- \(\to\) SO₄^2-_(aq) + H₂O₍₁₎.

The value of y in the equation is

Antwortdetails

The given reaction equation represents the reduction of sulfate ion (SO₄^2-) to hydrogen sulfide (H₂S) using two hydrogen ions (H⁺) and some number of electrons (e^-). In order to balance the charges on both sides of the equation, the number of electrons must be equal to the positive charges on the left side. On the left side, there are 2 hydrogen ions (2H⁺) with a charge of +2 and one sulfate ion (SO₄^2-) with a charge of -2. Thus, the total charge on the left side is 0. On the right side, there is one water molecule (H₂O) with a charge of 0 and one sulfate ion (SO₄^2-) with a charge of -2. Thus, the total charge on the right side is also -2. Since the charges on both sides must be equal, the number of electrons (y) involved in the reaction must be equal to the difference between the charges on both sides, which is 2. Therefore, the correct answer is y = 2.

Which of the following pairs of elements forms amphoteric oxides?

Antwortdetails

Which of the following compounds is the least soluble in water?

Antwortdetails

The solubility of a compound in water is determined by its ability to dissociate into ions in the water. Compounds that dissociate completely into ions are more soluble in water than those that do not dissociate as much. Looking at the given compounds, CaCl₂ dissociates into three ions (Ca²⁺ and two Cl^-) in water and NaCl dissociates into two ions (Na⁺ and Cl^-). CaSO₄ dissociates into two ions (Ca²⁺ and SO₄^2-) but it is less soluble than CaCl₂ because the SO₄^2- ion is larger and more polar than the Cl^- ion, so it has a stronger attraction to the Ca²⁺ ion, making it more difficult to dissociate. Na₂SO₄ dissociates into three ions (two Na⁺ and SO₄^2-) but it is also less soluble than NaCl because of the larger, more polar SO₄^2- ion. Therefore, CaSO₄ is the least soluble compound in water because it has a weaker ability to dissociate into ions in water compared to the other given compounds.

The vapour pressure of a liquid depends on:
I. Temperature II. rate of condensation III. Cohesive forces holding the particles together.

Antwortdetails

The number of unpaired electrons in an atom of an element ₈Q is _______?

Antwortdetails

To determine the number of unpaired electrons in an atom of an element, we need to know its electron configuration. The electron configuration of an element describes how its electrons are distributed in energy levels or orbitals. The element Q has an atomic number of 8, which means it has 8 electrons in its neutral state. To determine its electron configuration, we can use the periodic table. Q is in the second period and the 6th group (also known as group 16 or the oxygen group), which means it has 6 valence electrons. The electron configuration for Q is: 1s² 2s² 2p⁴ To determine the number of unpaired electrons, we need to look at the electron configuration and identify how many electrons occupy each orbital. In the case of Q, there are two electrons in the 2s orbital and four electrons in the 2p orbitals. The 2p orbitals each have one electron with the same spin, which means they are unpaired. Therefore, Q has 2 unpaired electrons. The answer is (A) 2.

To which group and period respectively does an element with 15 electrons belong?

Antwortdetails

When a reaction is endothermic,

Antwortdetails

Which of the following gases will diffuse most rapidly?

[H = 1.00, C = 12.0, O = 16.0, S = 32.0, Cl = 35.5]

Antwortdetails

The rate of diffusion of gases is inversely proportional to their molar mass. Therefore, the gas with the lowest molar mass will diffuse the most rapidly. The molar mass of each gas is: - Cl₂: 2 x 35.5 = 71.0 g/mol - SO₂: 32.0 + 2 x 16.0 = 64.0 g/mol - CH₄: 12.0 + 4 x 1.0 = 16.0 g/mol - C₂H₆: 2 x 12.0 + 6 x 1.0 = 30.0 g/mol Therefore, methane (CH₄) has the lowest molar mass and will diffuse most rapidly among the given options.

Which of the following reactions would take place when concentrated sodium hydroxide solution is added to palm oil?

Antwortdetails

The correct answer is saponification. When concentrated sodium hydroxide is added to palm oil, the triglyceride esters present in palm oil react with the sodium hydroxide to form glycerol and sodium salts of fatty acids. This process is called saponification, and the resulting product is soap. Therefore, saponification is the correct answer.

Which of the following metals is the strongest reducing agent?

Antwortdetails

Which of the following gases is monoatomic?

Antwortdetails

Argon is the only monoatomic gas among the given options. Monoatomic gases are those that exist as individual atoms, not as molecules. Argon, with atomic number 18, exists as individual atoms and doesn't form molecules. Chlorine, nitrogen, and oxygen are all diatomic gases, meaning that they exist as molecules consisting of two atoms of the same element bonded together. Chlorine has the formula Cl₂, nitrogen has the formula N₂, and oxygen has the formula O₂.

The shape of a graphite crystal is

Antwortdetails

The shape of a graphite crystal is hexagonal. Graphite is a form of carbon that consists of layers of carbon atoms arranged in a hexagonal lattice. The layers are held together by weak intermolecular forces called Van der Waals forces. Each carbon atom is bonded to three neighboring carbon atoms in a trigonal planar arrangement, resulting in a flat hexagonal structure. This gives graphite its characteristic layered structure, which makes it useful as a lubricant and as the "lead" in pencils.

How many orbits are contained in an atom with atomic number 13?

Antwortdetails

The atomic number of an element tells us the number of protons in its nucleus. For an electrically neutral atom, the number of electrons is equal to the number of protons. The electronic configuration of an atom with atomic number 13 is: 1s²2s²2p⁶3s²3p¹. The electronic configuration tells us that there are three occupied energy levels or orbits, namely the first, second, and third energy levels. The first energy level has a maximum of 2 electrons, the second energy level has a maximum of 8 electrons, while the third energy level can hold a maximum of 18 electrons. Therefore, an atom with atomic number 13 has 3 energy levels, which are occupied by 13 electrons. So the answer is 3.

The Van der waals' forces are dominant intermolecular forces in_______?

Antwortdetails

The Van der Waals' forces are dominant intermolecular forces in Chlorine. Van der Waals' forces are weak intermolecular forces that exist between molecules due to temporary changes in electron density. These forces arise due to the attraction between the positively charged nucleus of one molecule and the negatively charged electrons of another molecule. Chlorine is a non-polar molecule, which means it has no net dipole moment. Van der Waals' forces are the strongest intermolecular forces acting between non-polar molecules, and as Chlorine is non-polar, it is the dominant intermolecular force acting between Chlorine molecules.

Which of the following statements about intermolecular distances and cohesive forces between gas is correct? They are

Antwortdetails

The correct statement about intermolecular distances and cohesive forces between gases is "both negligible." The intermolecular distances between gas particles are very large compared to their size, so the cohesive forces between them are negligible. As a result, gases tend to expand to fill any available space and have no definite shape or volume. The kinetic energy of gas particles is much greater than the attractive forces between them, and as a result, they move freely and randomly in all directions.

Which of the following process does not take place in domestic water treatment?

Antwortdetails

The process that does not take place in domestic water treatment is neutralization. Domestic water treatment involves several processes to make water safe for human consumption. Chlorination is a process that involves adding chlorine to water to kill harmful microorganisms. Flocculation is the process of adding a chemical called a flocculant to water to help clump together small particles and impurities, making it easier to remove them through sedimentation. Sedimentation is a process in which the water is left to settle, allowing heavy particles and impurities to sink to the bottom. Neutralization, on the other hand, is a chemical process that involves the reaction of an acid with a base to form water and a salt. This process is not typically used in domestic water treatment, as the pH of the water is usually adjusted through other means such as adding lime or carbon dioxide.

Which of the following polymers in thermosetting?

Antwortdetails

Bakelite is a thermosetting polymer. Explanation: Thermosetting polymers are those that undergo a chemical reaction when heated and become irreversibly hard and rigid. Bakelite, which is also known as phenolic resin, is a thermosetting polymer that is synthesized by the reaction of phenol and formaldehyde. Once the reaction is complete, the resulting material is in a hard, infusible state that cannot be melted or reshaped by heating. On the other hand, nylon, polypropene, and polystyrene are thermoplastic polymers, which can be melted and reshaped upon heating.

A substance which dissolves readily in organic solvent would

Antwortdetails

A substance that dissolves readily in organic solvent would be a covalent compound. This is because organic solvents are usually nonpolar, which means that they dissolve substances that are also nonpolar or have weak polar characteristics. Covalent compounds are formed by the sharing of electrons between atoms and do not have strong electrostatic forces of attraction between their constituent atoms. This weak intermolecular attraction allows the organic solvent to penetrate and dissolve the covalent compound. In contrast, ionic compounds have strong electrostatic forces of attraction between their ions, which makes them insoluble in organic solvents. Covalent compounds typically have low melting points and do not conduct electricity in their solid or molten states because they do not have free-moving charged particles.

Which of the following substances is a heavy chemical?

Antwortdetails

The number of oxygen molecules present in 16.0g of the gas is ______?
[Avogadro's number = 6.02 x 10²³]

Antwortdetails

The molar mass of oxygen gas (O₂) is 32 g/mol. Therefore, 16.0 g of oxygen gas will contain one-half the number of moles as its mass in grams. Number of moles = mass ÷ molar mass Number of moles of O₂ in 16.0 g = 16.0 g ÷ 32 g/mol = 0.5 mol Since one mole of any substance contains Avogadro's number of particles (atoms or molecules), the number of oxygen molecules in 0.5 mol of O₂ is: Number of molecules = Avogadro's number x Number of moles Number of molecules = 6.02 x 10²³ x 0.5 = 3.01 x 10²³ Therefore, the correct option is: 3.01 x 10²³.

Which of the following statements about an electrochemical cell is correct? Oxidation occurs

Antwortdetails

The correct statement is "Oxidation occurs at the anode in an electrochemical cell." In an electrochemical cell, there are two half-cells: the anode and the cathode. At the anode, oxidation takes place, meaning that electrons are lost by the species being oxidized. These electrons travel through an external circuit to the cathode, where reduction takes place, and the electrons are gained by the species being reduced. This flow of electrons through the external circuit generates an electric current. The salt bridge is used to maintain electrical neutrality by allowing the flow of ions between the half-cells. The aqueous solution is where the species being oxidized and reduced are dissolved.

The following diagram illustrates the rate curve that was obtained when Mg reacted with excess dilute HCl.

The diagram became horizontal at X because

Antwortdetails

The bond formed when ammonia reacts with hydrogen ion to form ammonium ion is

Antwortdetails

The bond formed when ammonia reacts with hydrogen ion to form ammonium ion is a dative bond. In this reaction, the lone pair of electrons on the nitrogen atom of the ammonia molecule is donated to the hydrogen ion (H+) to form the ammonium ion (NH4+). This type of bond is also called a coordinate covalent bond, as both electrons in the bond come from the same atom (in this case, the nitrogen atom of the ammonia molecule).

The compound formed between ₁₄X and ₁₆Y is _______?

Antwortdetails

An example of an acid salt is

Antwortdetails

The correct answer is (c) NaHSO₄. An acid salt is a salt that is derived from the partial neutralization of an acid, resulting in a substance that has both acidic and basic properties. NaHSO₄ is an example of an acid salt because it is derived from the partial neutralization of sulfuric acid (H₂SO₄) with sodium hydroxide (NaOH). It has acidic properties because it can donate a hydrogen ion (H+) in water, and it has basic properties because it can accept a hydrogen ion (H+) in the presence of a strong acid. The other options are not acid salts. CH₃COOONa is a salt of a weak acid (acetic acid) and a strong base (sodium hydroxide), and therefore it is a basic salt. Mg(OH)Cl is a salt of a strong base (magnesium hydroxide) and a strong acid (hydrochloric acid), and therefore it is a neutral salt. (NH₄)₂SO₄ is a salt of a weak base (ammonia) and a strong acid (sulfuric acid), and therefore it is an acidic salt.

Which of the following trioxonitrate(V) salts would decompose on heating to form a metal?

Antwortdetails

Which of the following halogens is solid at room temperature?

Antwortdetails

Which of the following pairs of compounds belongs to the same homologous series?

Antwortdetails

C₂H₆ and C₄H₁₀ belong to the same homologous series, which is the series of alkanes. The homologous series refers to a group of organic compounds that have similar structures and chemical properties, and the same functional group. They have a general formula, with the same difference in the number of carbon and hydrogen atoms between consecutive members. The alkanes are a homologous series of hydrocarbons with the general formula C_nH_2n+2. Therefore, C₂H₆ and C₄H₁₀ have different numbers of carbon atoms, but they both have only single bonds between the carbon atoms and hydrogen atoms.

A change in the temperature of a saturated solution disturbs the equilibrium between the

Antwortdetails

The gas given off when ethanol reacts with sodium is

Antwortdetails

The gas given off when ethanol reacts with sodium is hydrogen. This is because sodium is a more reactive metal than hydrogen and it will displace the hydrogen in ethanol, forming sodium ethoxide and hydrogen gas. The reaction can be represented as follows: C2H5OH + Na → C2H5ONa + H2 So, during this reaction, hydrogen gas is evolved as a product.

The following transition metal ions would be coloured in aqueous solution except________?

Antwortdetails

The correct answer is Sc³⁺. Transition metal ions are often colored because their electrons can absorb light energy and jump to higher energy levels. When the electrons drop back down to their original energy levels, they release the energy as visible light, which we see as color. The color of the complex depends on the arrangement of the ligands around the metal ion. Scandium (Sc) has only one electron in its outermost shell, which it loses to form the Sc³⁺ ion. Since it has an empty d-orbital, it cannot absorb light in the visible region, and therefore it is colorless in aqueous solution. On the other hand, Cr³⁺, Fe³⁺, and Mn³⁺ ions have partially filled d-orbitals, which allow them to absorb light in the visible region and give them characteristic colors in aqueous solution. Cr³⁺ is violet, Fe³⁺ is yellow, and Mn³⁺ is pink.

A compound has an empirical formular CH₂O and molecular mass of 90.

[H = 1.00, C = 12.0, O = 16.0]

Antwortdetails

The empirical formula of the compound is CH₂O, which indicates that for every carbon atom there are two hydrogen atoms and one oxygen atom. The molecular mass of the compound is 90, which is the sum of the atomic masses of all the atoms in the molecule. Let's calculate the molecular formula of the compound using this information. The empirical formula mass of CH₂O is: (1 x 12.0) + (2 x 1.00) + (1 x 16.0) = 30.0 g/mol To calculate the molecular formula, we need to divide the molecular mass by the empirical formula mass: Molecular formula mass / Empirical formula mass = n 90.0 / 30.0 = 3 Therefore, the molecular formula of the compound is three times the empirical formula: C₃H₆O₃ So, the correct option is C3H6O3.

Which of the following substances when boiled with aqueous solution of sodium hydroxide would be hydrolyzed?

i. Protein ii. Fat iii. Polythene

Antwortdetails

Protein and fat are both organic compounds that can undergo hydrolysis when boiled with an aqueous solution of sodium hydroxide. Polythene, on the other hand, is a synthetic polymer and is not susceptible to hydrolysis under such conditions. Therefore, the correct answer is (c) i and ii.

Which of the following compounds is a secondary alkanol?

Antwortdetails

A secondary alkanol is an alcohol where the carbon atom attached to the hydroxyl (-OH) group is bonded to two other carbon atoms. In other words, it has two alkyl groups attached to the carbon atom with the -OH group. Out of the options given, 2-methylbutan-2-ol and 3-methylpentan-2-ol have the required structure to be classified as secondary alkanols. Therefore, the correct answer is either 2-methylbutan-2-ol or 3-methylpentan-2-ol.

A substance responsible for the sour taste of unripe orange is

Antwortdetails

The substance responsible for the sour taste of unripe orange is an organic acid. Organic acids are a class of compounds that have at least one carboxyl group (-COOH) in their molecular structure. The most common organic acid found in oranges is citric acid. When an orange is unripe, it contains more citric acid, giving it a sour taste. As the fruit ripens, the citric acid content decreases, and the fruit becomes sweeter. Therefore, the correct option is alkanoic acid.

Which of the following oxides can be reduced by hydrogen?

Antwortdetails

The alkaline earth metals have similar chemical properties because________?

Antwortdetails

The correct option is: They have the same number of valence electrons. Alkaline earth metals are the elements in Group 2 of the periodic table. They have similar chemical properties because they have the same number of valence electrons, which is two. The valence electrons of an element are the electrons in the outermost shell of the atom, and they determine the chemical properties of the element. Because alkaline earth metals have two valence electrons, they have similar reactivity and form similar types of chemical bonds. For example, they react with nonmetals to form ionic compounds with a 2+ charge. So, their similar chemical properties are due to the fact that they all have two valence electrons.

The shape of a molecule of water is _______?

Antwortdetails

The shape of a molecule of water is non-linear. A water molecule consists of two hydrogen atoms and one oxygen atom. The oxygen atom is more electronegative than the hydrogen atoms, so it pulls the shared electrons towards itself, creating a partial negative charge on the oxygen and partial positive charges on the hydrogen atoms. This results in a bent or non-linear shape of the water molecule, where the oxygen atom is at the center, and the two hydrogen atoms are positioned at an angle of about 104.5 degrees with respect to each other.

Starch could be converted to glucose by the process of

Antwortdetails

Starch is a complex carbohydrate made up of many glucose units linked together. In order to convert it to glucose, the process of hydrolysis is required. Hydrolysis is a chemical reaction that involves breaking down a compound by adding water molecules. In the case of starch, enzymes can be used to break down the long chains of glucose molecules into individual glucose molecules by adding water. This process is used in the production of glucose syrup and other sweeteners, which are used in a variety of food products. The other options listed - condensation, dehydration, and fermentation - do not involve the breakdown of starch into glucose.

Which of the following products of biotechnology can be used as a fuel in place of petrol?

Antwortdetails

Consider the following equilibrium system:
2SO_2(g) + O_2(g) \(\rightleftharpoons\) 2SO_3(g)

The addition of more O_2(g) to the system will shift the equilibrium position to the

Antwortdetails

The correct balanced equation for the reaction between aluminium metal and hot concentrated tetraoxosulphate(VI)acid is ?

Antwortdetails

The complete hydrogenation of benzene gives

Antwortdetails

The complete hydrogenation of benzene involves adding hydrogen gas (H2) to the benzene ring under the right conditions. This reaction is known as hydrogenation and it can be catalyzed by a metal catalyst, such as platinum or nickel. During the reaction, the double bonds in the benzene ring are broken and each carbon atom in the ring is bonded to two hydrogen atoms. The product of the reaction is cyclohexane, a six-membered ring hydrocarbon with single bonds between all the carbon atoms. Therefore, the correct answer is (b) Cyclohexane.

Which of the following oxides is ionic?

Antwortdetails

(a)(i) Name two gases that could be used to perform the fountain experiment.

(ii) State the physical property which makes the gases suitable for the experiment in (a)(i)

(b)(i) Define each of the following terms: I. solubility; II. saturated solution.

(ii) State two factors that affect the solubility of a solid in a liquid.

(iii) A salt Z of mass 10.2 g was dissolved in 15.4 cm\(^3\) of distilled water at 40°C. Calculate the solubility of Z in moldm\(^3\) at 40°C. [Mr (Z) = 331].

(c)(i) Town water supplies that have passed through iron pipes contain P and Q ions. In the presence of air, P ions are slowly converted to Q ions.

I. Identify P and Q ions. II. Write a balanced equation for the reaction between P ions, hydrogen ions and oxygen to give Q ions and water.

(ii) Explain briefly a test to confirm the purity of water.

(iii) State the effect of:

I. boiling a temporally hard water. II. adding sodium trioxocarbonate (IV) crystals to permanent hard water;

(iv) Write a balanced equation for the process in (c)(iii)I.

Antwortdetails

None

(a) Consider the following table; (i) Which of the elements:

I. is a halogen?

II. is most likely to be attracted by a magnet?

III. belongs to group I?

IV. would readily form an ion with a double negative charge?

(ii) What type of bond would exist between J and X when they combine?

(iii) How many neutrons are there in Q?

(iv) Write the formula of the compound formed when R combines with X.

(v) State the element which exists as diatomic molecule..

(vi) Select the element which belong to the d-block of the periodic table.

(b)(i) Explain briefly the term atomic orbital

(ii) I. State three prostulates of Dalton's atomic theory.

II. List two limitations of this theory in the study of the atom

(iii) Describe briefly the structure of sodium chloride in its solid state.

(c) A sample of carbon is burnt at a rate of 0.50g per second for 30 minutes to generate heat.

(i) Write a balanced equation for the reaction

(ii) Determine the:

I. volume of carbon (IV) oxide produced at s.t.p.

II. moles of oxygen used up in the process at s.t.p. [C = 12.0, O = 16.0, Molar volume V\(_m\) = 22.4 dm\(^3\)].

Antwortdetails

None

(a) Define electrochemical cell.

(b) Aluminium can be prepared commercially by the application of electrolysis. Name the: I. electrolyte used in the process; II. ore from which the electrolyte is obtained; III. electrodes used in the electrolysis.

(ii) Give two reasons why cryolite, NaAl F\(_6\) is added to the electrolyte?

(c)(i) List the two gaseous fuels produced from coke.

(ii) Which of the two gases listed in (c)(i) is a better fuel?

(iii) Give a reason for your answer in (c)(i)

(iv) Write a balanced equation for the production of each gaseous fuel.

(d)(i) For each of the following reactions, state what would be observed when: I. chlorine gas is bubbled through aqueous sodium iodide; II. chlorine gas is passed over heated iron in a hard glass tube; III. aqueous silver trioxonitrate (V) is added to aqueous sodium bromide.

(ii) Write a balanced chemical equation for each of the reactions in (d)(i).

Antwortdetails

None

TEST OF PRACTICAL KNOWLEDGE QUESTION

Credit will be given for strict adherence to the instructions, for observations precisely recorded and for accurate inferences. All tests, observations, and inferences must be clearly entered in your answer book, in ink, at the time they are made.

C and D are inorganic salts. E is a solution of an organic compound. Carry out the following exercises on C, D and E. Record your observations and identify any gas(es) evolved. State the conclusion you draw from the result of each test.

(a) To all of C, add about 2 cm\(^3\) of distilled water in a boiling tube. Shake to dissolve and test the solution with litmus paper.

(b)i) Test E with litmus paper.

(ii) Add all of E to the solution obtained in (a).

(c)(i) Add about 5 cm\(^3\) of distilled water to D in a test tube and shake thoroughly. Divide the resulting solution into two portions.

(ii) To the first portion, add few drops of BaCl\(_{2(aq)}\) followed by excess dil. HCl.

(iii) To the second portion, add HNO\(_{3(aq)}\) in drops and then in excess. 

Antwortdetails

None

(a) Define esterification.

(b) State two properties of plastic.

(c) Name the components of duralumin.

(d) What is meant by each of the following terms?

(i) Raw material.

(ii) Primary product.

(e) State Charles' law.

(f) List four pieces of protective equipment in the laboratory.

(g) Give two uses of ammonia.

(h) Name the:

(i) process by which lighter hydrocarbons are obtained from heavier ones;

(ii) products formed from the reaction between ethanol and sodium metal.

(i) Determine the oxidation number of sulphur in H\(_2\)SO\(_4\).

(j) Write the IUPAC name for each of the following compounds: (i) NaClO\(_3\); (ii) CuSO\(_4\)5H\(_2\)O.

Antwortdetails

None