Synthetic And Naturally Occurring Polymers
Akopọ
In the spring of 1933 two chemists at a works laboratory in Cheshire squeezed ethene gas to close to two thousand times atmospheric pressure, hoping to force it to react with something else. They opened the vessel and found neither of the products they had planned for. Clinging to the inside was a white, waxy solid that nobody had asked for and nobody could immediately identify. It took two more years to work out how to make it on purpose, and the trick turned out to be a leak: a trace of oxygen was starting the reaction. Within a decade that accident was insulating the cables of wartime radar sets, and within thirty years it had rebuilt the shopping bag, the bucket, the bottle and the water pipe.
This lesson is about how a gas with one double bond becomes a solid you can stand on. You will see exactly what happens to that double bond, learn to draw the repeat unit of a polymer from any alkene you are handed, and find out why the same monomer can be turned into a floppy carrier bag or a rigid drainpipe depending only on the temperature, the pressure and the catalyst used. Then comes the part the world is still arguing about: what to do with the waste, why microbes will not touch most of it, and whether a bag grown from maize is the answer or only part of one.
Awọn Afojusun
- Alkenes can be used to make polymers such as poly(ethene) and poly(propene). In polymerisation reactions, many small molecules (monomers) join together to form very large molecules (polymers). For example: H H H H | | | | n C C → C C | | | | H H H H n ethene poly(ethene) Students should be able to recognise the molecules involved in these reactions in the forms shown in the subject content. They should be able to represent the formation of a polymer from a given alkene monomer. Further details of polymerisation are not required.
- The properties of polymers depend on what they are made from and the conditions under which they are made. For example, low-density (LD) and high-density (HD) poly(ethene) are produced using different catalysts and reaction conditions.
- Thermosoftening polymers consist of individual, tangled polymer chains. Thermosetting polymers consist of polymer chains with cross-links between them so that they do not melt when they are heated. Students should be able to explain thermosoftening polymers in terms of intermolecular forces.
- Polymers have many useful applications and new uses are being developed. Examples include: new packaging materials, waterproof coatings for fabrics, dental polymers, wound dressings, hydrogels, and smart materials (including shape memory polymers). Students should consider the ways in which new materials are being developed and used, but will not need to recall the names of specific examples.
- Many polymers are not biodegradable, ie they are not broken down by microbes. This can lead to problems with waste disposal. Knowledge of specific named examples is not required, but students should be aware of the problems that are caused in landfill sites and in litter.
- Plastic bags are being made from polymers and cornstarch so that they break down more easily. Biodegradable plastics made from cornstarch have been developed.
Àwòrán ọpọlọ
A ti ṣe àwòrán kókó yìí kí o lè rí bí àwọn èrò ṣe so pọ̀.
Ṣí àwòrán ọpọlọ nínú áàpù
Akọ̀wé Ẹ̀kọ́
Àkọsílẹ̀ Ẹ̀kọ́ Pípé wà lórí Ohun Èlò Green Bridge
Gba ohun èlò Green Bridge CBT sórí fóònù tàbí kọ̀mpútà rẹ fún gbogbo ilé ìkàwé IGCSE: ìwé ìdánwò àtijọ́, ìlànà ìdíwọ̀n, àwòrán èrò, káàdì ìkẹ́kọ̀ọ́ àti ẹ̀kọ́ ohùn.
Ìdánwò Ẹ̀kọ́
Oriire fun ipari ẹkọ lori Synthetic And Naturally Occurring Polymers. Ni bayi ti o ti ṣawari naa awọn imọran bọtini ati awọn imọran, o to akoko lati fi imọ rẹ si idanwo. Ẹka yii nfunni ni ọpọlọpọ awọn adaṣe awọn ibeere ti a ṣe lati fun oye rẹ lokun ati ṣe iranlọwọ fun ọ lati ṣe iwọn oye ohun elo naa.
Iwọ yoo pade adalu awọn iru ibeere, pẹlu awọn ibeere olumulo pupọ, awọn ibeere idahun kukuru, ati awọn ibeere iwe kikọ. Gbogbo ibeere kọọkan ni a ṣe pẹlu iṣaro lati ṣe ayẹwo awọn ẹya oriṣiriṣi ti imọ rẹ ati awọn ogbon ironu pataki.
Lo ise abala yii gege bi anfaani lati mu oye re lori koko-ọrọ naa lagbara ati lati ṣe idanimọ eyikeyi agbegbe ti o le nilo afikun ikẹkọ. Maṣe jẹ ki awọn italaya eyikeyi ti o ba pade da ọ lójú; dipo, wo wọn gẹgẹ bi awọn anfaani fun idagbasoke ati ilọsiwaju.
- Which type of compound can be used as a monomer to make an addition polymer? A. an alkane B. an alkene C. an alcohol D. a carboxylic acid Answer: B
- What happens to the carbon to carbon double bond of a monomer during addition polymerisation? A. It stays as a double bond in the polymer. B. It opens to become a single bond. C. It becomes a triple bond. D. It is lost as a gas. Answer: B
- Which statement about HD poly(ethene) compared with LD poly(ethene) is correct? A. It has more branched chains and a lower density. B. It has more branched chains and a higher density. C. It has fewer branched chains and a lower density. D. It has fewer branched chains and a higher density. Answer: D
- Why does a thermosetting polymer not melt when it is heated? A. Its chains are held together by weak intermolecular forces. B. Its chains are joined to each other by cross links. C. Its chains are much longer than those of other polymers. D. Its chains contain no carbon to carbon bonds. Answer: B
- Plastic bags are made from a blend of a polymer and cornstarch so that the bags: A. break down more easily B. can be stretched further C. cost more to produce D. melt at a higher temperature Answer: A
Ṣiṣẹ́ lórí àwọn ìbéèrè wọ̀nyí nínú ohun èlò náà
Ṣiṣẹ́ lórí àwọn ìbéèrè wọ̀nyí nínú ohun èlò náà
Awọn Iwe Itọsọna Ti a Gba Nimọran
Ṣe Adaṣe Awọn Ibeere Idanwo Adaṣe
Ṣe o fẹ ṣe adaṣe awọn ibeere idanwo adaṣe nipa Synthetic And Naturally Occurring Polymers? Ṣe igbasilẹ ohun elo Green Bridge CBT lati wọle si awọn ibeere idanwo adaṣe ati awọn ayẹwo adaṣe kikun fun koko-ọrọ yii.
Ṣe igbasilẹ ohun elo naa lori Google Playstore
Gbogbo ohun ti o nilo lati ṣe dara julọ ninu JAMB, WAEC ati NECO.
