Specialist Techniques And Processes
Akopọ
There are only three things you can do to a material. You can take some away, you can add some on, or you can push what is there into a new shape. Every process in a workshop and every process in a factory is one of those three, and the specification uses exactly those headings: wastage, addition and shaping. Learn them as three families and thirty processes become manageable.
This is the largest topic in the specialist technical principles and it earned three questions on the specimen paper, worth thirteen marks between them. You will learn how to use measurement and reference points, templates, jigs and patterns; the wastage, addition and shaping processes by name and by what each is for; how products are made to a tolerance by manufacturing to minimum and maximum measurements; the application and use of quality control, which the specification defines differently for each material area; and the commercial processes for papers and boards, timbers, metals and polymers. This is specialist technical principles content, examined in Section B of Paper 1.
Awọn Afojusun
- The use of production aids
- How to use measurement/reference points, templates, jigs, and patterns where suitable
- Tools, equipment and processes
- A range of tools, equipment and processes that can be used to shape, fabricate, construct, and assemble high quality prototypes, as appropriate for the materials being used including: wastage, such as:
- die cutting
- perforation
- turning
- sawing
- milling and routing
- drilling
- cutting and shearing
- addition, such as:
- brazing
- welding
- lamination
- soldering
- 3D printing
- printing
- shaping such as:
- vacuum forming
- creasing
- pressing
- drape forming
- bending
- folding
- blow moulding
- casting
- injection moulding
- extrusion.
- How products are made to a tolerance
- Manufacturing to minimum and maximum measurements.
- The application and use of quality control
- Papers and boards (registration marks).
- Timber based materials (dimensional accuracy using go/ no go fixture).
- Metal based materials (dimensional accuracy using measuring equipment).
- Polymers (dimensional accuracy by selecting correct laser cutting settings).
- Commercial processes
- Papers and boards (offset lithography and die cutting).
- Timber based materials (routing and turning).
- Metal based materials (milling and casting).
- Polymers (injection moulding and extrusion).
Àwòrán ọpọlọ
A ti ṣe àwòrán kókó yìí kí o lè rí bí àwọn èrò ṣe so pọ̀.
Ṣí àwòrán ọpọlọ nínú áàpù
Akọ̀wé Ẹ̀kọ́
Àkọsílẹ̀ Ẹ̀kọ́ Pípé wà lórí Ohun Èlò Green Bridge
Gba ohun èlò Green Bridge CBT sórí fóònù tàbí kọ̀mpútà rẹ fún gbogbo ilé ìkàwé IGCSE: ìwé ìdánwò àtijọ́, ìlànà ìdíwọ̀n, àwòrán èrò, káàdì ìkẹ́kọ̀ọ́ àti ẹ̀kọ́ ohùn.
Ìdánwò Ẹ̀kọ́
Oriire fun ipari ẹkọ lori Specialist Techniques And Processes. Ni bayi ti o ti ṣawari naa awọn imọran bọtini ati awọn imọran, o to akoko lati fi imọ rẹ si idanwo. Ẹka yii nfunni ni ọpọlọpọ awọn adaṣe awọn ibeere ti a ṣe lati fun oye rẹ lokun ati ṣe iranlọwọ fun ọ lati ṣe iwọn oye ohun elo naa.
Iwọ yoo pade adalu awọn iru ibeere, pẹlu awọn ibeere olumulo pupọ, awọn ibeere idahun kukuru, ati awọn ibeere iwe kikọ. Gbogbo ibeere kọọkan ni a ṣe pẹlu iṣaro lati ṣe ayẹwo awọn ẹya oriṣiriṣi ti imọ rẹ ati awọn ogbon ironu pataki.
Lo ise abala yii gege bi anfaani lati mu oye re lori koko-ọrọ naa lagbara ati lati ṣe idanimọ eyikeyi agbegbe ti o le nilo afikun ikẹkọ. Maṣe jẹ ki awọn italaya eyikeyi ti o ba pade da ọ lójú; dipo, wo wọn gẹgẹ bi awọn anfaani fun idagbasoke ati ilọsiwaju.
- Which one of the following is an addition process? A. Blow moulding B. Brazing C. Milling D. Shearing Answer: B
- In vacuum forming, the softened sheet is forced onto the mould by A. a hydraulic ram. B. atmospheric pressure. C. the weight of the sheet. D. an injection screw. Answer: B
- A dimension is given as 40 millimetres with a tolerance of plus 0.3 and minus 0.2. What is the total tolerance? A. 0.1 millimetres B. 0.2 millimetres C. 0.3 millimetres D. 0.5 millimetres Answer: D
- Registration marks are used as a quality control method for A. metal based materials. B. papers and boards. C. polymers. D. timber based materials. Answer: B
- Which process produces a continuous length of constant cross section? A. Blow moulding B. Die casting C. Extrusion D. Pressing Answer: C
Ṣiṣẹ́ lórí àwọn ìbéèrè wọ̀nyí nínú ohun èlò náà
Ṣiṣẹ́ lórí àwọn ìbéèrè wọ̀nyí nínú ohun èlò náà
Awọn Iwe Itọsọna Ti a Gba Nimọran
Ṣe Adaṣe Awọn Ibeere Idanwo Adaṣe
Ṣe o fẹ ṣe adaṣe awọn ibeere idanwo adaṣe nipa Specialist Techniques And Processes? Ṣe igbasilẹ ohun elo Green Bridge CBT lati wọle si awọn ibeere idanwo adaṣe ati awọn ayẹwo adaṣe kikun fun koko-ọrọ yii.
Ṣe igbasilẹ ohun elo naa lori Google Playstore
Gbogbo ohun ti o nilo lati ṣe dara julọ ninu JAMB, WAEC ati NECO.
