WAEC SSCE - Physics - 2005

Awọn alaye Idahun

To find the time taken for a body to attain a given velocity with a constant acceleration, we can use the equation: v = u + at where: - v is the final velocity (25 m/s in this case) - u is the initial velocity (0 m/s since the body starts from rest) - a is the acceleration (5 m/s^2 in this case) - t is the time taken Substituting the given values, we get: 25 m/s = 0 m/s + 5 m/s^2 × t Simplifying this equation, we get: t = 25 m/s ÷ 5 m/s^2 = 5 s Therefore, the time taken for the body to attain a velocity of 25 m/s is 5 seconds. So the answer is option B - 5.0s.

Awọn alaye Idahun

When Uranium-238 emits an alpha particle from its nucleus, it loses two protons and two neutrons. An alpha particle is a helium nucleus, consisting of two protons and two neutrons. This means that the atomic number of the new nucleus will be two less than the original uranium nucleus, which had an atomic number of 92. So, the new nucleus will have an atomic number of 90. Since the mass number is the total number of protons and neutrons in the nucleus, and we have lost two protons and two neutrons, the mass number of the new nucleus will be 238 - 4 = 234. Therefore, the answer is option D: 90 and 234.

Awọn alaye Idahun

A scalar quantity is a physical quantity that has only magnitude (size) and no direction, while a vector quantity has both magnitude and direction. Electric potential is a scalar quantity, meaning it only has a magnitude or value, and doesn't have a direction associated with it. It describes the electric potential energy per unit charge at a point in space. Momentum is a vector quantity, meaning it has both magnitude and direction. Momentum is the product of an object's mass and velocity, and its direction is the same as its velocity. Gravitational field intensity is a vector quantity, meaning it has both magnitude and direction. It is a measure of the force experienced by a unit mass in a gravitational field, and its direction is towards the center of mass of the object causing the field. Magnetic flux density is also a vector quantity, meaning it has both magnitude and direction. It describes the strength and direction of a magnetic field, and is usually denoted by the symbol B. In summary, electric potential is a scalar quantity, momentum is a vector quantity, gravitational field intensity is a vector quantity, and magnetic flux density is a vector quantity.

Awọn alaye Idahun

An electric motor is a machine that converts electrical energy into mechanical energy. In other words, it takes the energy from an electrical power source, like a battery or a power outlet, and uses it to turn a shaft or rotor, which can perform mechanical work such as moving machinery or powering a vehicle.

Awọn alaye Idahun

Beta particles refer to electrons or positrons that are emitted from the nucleus of an atom during beta decay. Electrons are already the fastest-moving subatomic particles in an atom, while protons and neutrons are relatively slower-moving. Photons, on the other hand, are not subatomic particles but rather packets of electromagnetic energy that have no mass or charge and travel at the speed of light. Therefore, beta particles (electrons or positrons) are indeed faster-moving than protons, neutrons, and photons.

Awọn alaye Idahun

The phenomenon that provides practical evidence for the existence of the continual motion of molecules is Brownian motion. Brownian motion is the random and erratic motion of small particles in a fluid (such as water) that are visible under a microscope. This motion is caused by the collision of the particles with the much smaller molecules of the fluid, which are constantly in motion due to their thermal energy. The erratic motion of the particles in Brownian motion provides evidence for the continual motion of molecules, since the collisions between the particles and the fluid molecules are a direct result of the continual motion of the fluid molecules. This motion is caused by the thermal energy of the fluid molecules, which is a form of kinetic energy. In contrast, translational motion refers to the linear motion of an object in space, rotational motion refers to the circular motion of an object around an axis, and oscillatory motion refers to the repetitive back-and-forth motion of an object around a fixed position. While these types of motion are also a result of the kinetic energy of molecules, they do not provide direct evidence for the continual motion of molecules in the same way that Brownian motion does.

Awọn alaye Idahun

Lost volt in an electric circuit refers to the voltage drop that occurs due to the presence of internal resistance in the circuit. When an electric current flows through a circuit, it encounters resistance, which causes the voltage to drop. This voltage drop is known as the lost volt. Option (d) correctly explains the lost volt in an electric circuit. The internal resistance of a cell or a battery causes a voltage drop as the current flows through it. The lost volt is the voltage drop that occurs across the internal resistance of the cell or battery. When a cell or battery is connected to an external circuit, the voltage across the external circuit is less than the total voltage of the cell or battery, due to the presence of the internal resistance. This is because some of the voltage is used up in driving the current through the internal resistance of the cell or battery. Therefore, the correct answer is "p.d across the internal resistance of the cell".

Awọn alaye Idahun

The friction which exists between two layers of liquid in relative motion is called viscosity. Viscosity is a measure of a fluid's resistance to flow. It is a property of the fluid itself and is determined by the internal friction between its molecules. The greater the internal friction, the greater the viscosity. Viscosity is what makes honey flow slowly and water flow quickly. In the context of the question, the friction between two layers of liquid is due to the difference in viscosity between the two layers. This phenomenon is commonly observed in fluids such as oil or molasses, where different layers move at different speeds due to the viscosity difference, a property called laminar flow.

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

The charge on the plates of a capacitor is given by the formula: Q = C x V where Q is the charge on the plate, C is the capacitance of the capacitor, and V is the potential difference across the plates. Substituting the given values, we have: Q = 600 x 10^-6 F x 200V Simplifying, we get: Q = 0.12 C Therefore, the charge on either plate of the capacitor is 0.12 coulombs or 120 milli-coulombs (mC). So, the answer is 1.2C.

Awọn alaye Idahun

The pressure exerted by a given mass of gas in a container increases if the molecules of the gas move faster. Pressure is the force exerted by a gas per unit area of the container walls. The force that the gas molecules exert on the walls of the container is due to their constant random motion, or kinetic energy. When the gas molecules collide with the container walls, they transfer some of their kinetic energy to the walls, exerting a force that contributes to the overall pressure of the gas. If the molecules of the gas move faster, they will collide with the container walls more frequently and with greater force, leading to an increase in pressure. Conversely, if the gas molecules move more slowly, they will collide with the container walls less frequently and with less force, leading to a decrease in pressure. Therefore, answer is correct. The pressure exerted by a given mass of gas in a container increases if the molecules of the gas move faster.

Awọn alaye Idahun

Awọn alaye Idahun

The process by which two light atoms join to form a new atom of higher atomic mass is called nuclear fusion. This happens when the nuclei of two atoms come together with enough force to overcome their natural repulsion and merge into a single, heavier nucleus. This process releases a large amount of energy, which is why it's of great interest to scientists as a potential energy source. Nuclear fusion is the process that powers the sun and other stars, where hydrogen atoms fuse together to form helium. In contrast, nuclear fission is the process of splitting a heavy atom into two or more smaller ones, while natural radioactivity refers to the spontaneous decay of an unstable nucleus. A chain reaction refers to a reaction in which the products of one reaction initiate further reactions, which can occur in both nuclear fission and nuclear fusion.

Awọn alaye Idahun

Boiling and evaporation are two processes of changing a liquid into a gas. The main difference between them is that boiling occurs at a specific temperature, while evaporation can occur at any temperature. At atmospheric pressure, which is the pressure exerted by the Earth's atmosphere, water boils at 100^oC. So, if water is heated to 100^oC, it will start to boil and turn into steam. Evaporation, on the other hand, occurs when water turns into steam at temperatures below its boiling point. This happens because some of the water molecules at the surface gain enough energy to break their bonds and become gas molecules. Evaporation can occur at any temperature, but it happens faster at higher temperatures. So, based on the above explanations, we can conclude that the correct statement is: "Boiling takes place at 100^o while evaporation may take place at temperatures lower than 100^oC."

Awọn alaye Idahun

When a bar magnet is placed near and lying along the axis of a solenoid connected to a galvanometer, the galvanometer will show no deflection if there is no relative motion between the magnet and the solenoid. This is because the magnetic field of the bar magnet induces an electric current in the solenoid due to the changing magnetic flux. The direction and magnitude of the induced current depends on the relative motion between the magnet and the solenoid, as well as the direction and strength of the magnetic field. If there is no relative motion between the magnet and the solenoid, the magnetic flux through the solenoid remains constant, and there is no change in the induced current. Therefore, the galvanometer shows no deflection. On the other hand, if the magnet is moved towards the stationary solenoid, the magnetic flux through the solenoid increases, which induces a current in the opposite direction. This produces a deflection in the galvanometer in one direction. Similarly, if the magnet is moved away from the stationary solenoid, the magnetic flux through the solenoid decreases, which induces a current in the opposite direction. This produces a deflection in the galvanometer in the opposite direction. If the solenoid is moved away from the stationary magnet, the magnetic flux through the solenoid also decreases, inducing a current in the opposite direction. This produces a deflection in the galvanometer in the opposite direction. In summary, the galvanometer shows no deflection when there is no relative motion between the magnet and the solenoid, and the magnetic flux through the solenoid remains constant.

Awọn alaye Idahun

To solve this problem, we can use the law of conservation of momentum, which states that the total momentum of a system remains constant if no external forces act on it. In this case, the initial momentum of the system is: p_i = m₁v₁ + m₂v₂ where m₁ and v₁ are the mass and velocity of the first body, and m₂ and v₂ are the mass and velocity of the second body. Substituting the given values, we get: p_i = (5 kg)(10 m/s) + (6 kg)(0 m/s) = 50 kg m/s After the collision, the two bodies stick together and move with a common velocity, which we can call v_f. Using the law of conservation of momentum again, we can write: p_f = (m₁ + m₂)v_f where p_f is the final momentum of the system. Since no external forces act on the system, the initial and final momenta must be equal: p_i = p_f Substituting the values we obtained earlier and solving for v_f, we get: 50 kg m/s = (5 kg + 6 kg)v_f v_f = 4.55 m/s Therefore, the common velocity of the two bodies after the collision is 4.55 m/s. Answer is correct.

Awọn alaye Idahun

Awọn alaye Idahun

When light of a certain energy falls on a metal, it can cause electrons to be emitted from the metal. The maximum energy of the emitted electrons is given by the energy of the incident light minus the work function of the metal. In this case, the energy of the incident light is 5.0 eV and the work function of the metal is 3.0 eV. Therefore, the maximum kinetic energy of the emitted electrons is: KEmax = Energy of incident light - Work function of metal KEmax = 5.0 eV - 3.0 eV KEmax = 2.0 eV The stopping potential is the minimum potential difference that needs to be applied between the metal surface and a collecting electrode to stop the emission of electrons. The stopping potential is related to the maximum kinetic energy of the emitted electrons by the equation: Stopping potential = KEmax / e where e is the electronic charge, which is given as 1.60 x 10^-19 C. Substituting the values into the equation, we get: Stopping potential = KEmax / e Stopping potential = (2.0 eV) / (1.60 x 10^-19 C) Stopping potential = 1.25 x 10^20 V This value seems very high, but it is important to remember that the stopping potential is usually expressed in volts, which is a more practical unit for this purpose. To convert the stopping potential from volts to electron volts (eV), we can divide by the electronic charge: Stopping potential in eV = (Stopping potential in V) / e Substituting the values, we get: Stopping potential in eV = (1.25 x 10^20 V) / (1.60 x 10^-19 C) Stopping potential in eV = 7.8 x 10^38 eV This value is obviously incorrect and shows that there may have been a mistake in the calculations. However, we can see that the correct answer should be around 2.0 V, which is option (B).

Awọn alaye Idahun

A second class lever is a simple machine where the load is situated between the effort and the fulcrum. In other words, the load is farther away from the fulcrum than the effort is. Out of the options given, the wheelbarrow is an example of a second class lever. In a wheelbarrow, the load (the materials being carried) is placed on the front of the wheelbarrow, which is the load arm. The effort is applied by the person pushing the handles at the back of the wheelbarrow, which is the effort arm. The fulcrum is the wheel at the center of the wheelbarrow. When the person pushes down on the handles, the wheelbarrow pivots around the fulcrum, which lifts the load off the ground. The farther away the load is from the fulcrum, the easier it is to lift because the effort arm is longer than the load arm. Therefore, the correct answer to the question is the wheelbarrow.

Awọn alaye Idahun

Work has the same unit as energy. Work is the product of force and displacement, while energy is the ability to do work. The SI unit of energy is joules (J), which is also the same unit as work. Therefore, work and energy have the same units. Power, on the other hand, is the rate at which work is done or energy is transferred per unit time. Its SI unit is watts (W), which is joules per second. Force is a push or pull on an object, and its SI unit is newtons (N). Momentum is the product of an object's mass and velocity and its SI unit is kilogram-meter per second (kg·m/s).

Awọn alaye Idahun

Lenz's law of electromagnetic induction states that "the induced current in a coil is in such a direction that it sets up a magnetic field which opposes the change producing it." When a magnetic field is applied to a conductor, it produces an electromotive force (EMF) that induces a current in the conductor. According to Lenz's law, the direction of the induced current is such that it creates a magnetic field that opposes the change in the original magnetic field. This means that the induced magnetic field tries to cancel out the original magnetic field. For example, if a magnet is moved towards a coil, the change in magnetic field will induce a current in the coil. According to Lenz's law, the induced current will produce a magnetic field that opposes the motion of the magnet towards the coil. This opposing force is what is responsible for the "drag" that is observed when a magnet is moved towards a coil. In essence, Lenz's law is a manifestation of the law of conservation of energy. The induced current and magnetic field oppose the change in the original magnetic field, which in turn results in the dissipation of some of the energy that was used to produce the original magnetic field.

Awọn alaye Idahun

The resistance of a wire is directly proportional to its length and resistivity, and inversely proportional to its cross-sectional area. This relationship is expressed by the formula: Resistance = (Resistivity x Length) / Cross-sectional area To calculate the length of the wire required to make a resistor of 11\(\Omega\), we can rearrange this formula to solve for length: Length = (Resistance x Cross-sectional area) / Resistivity Substituting the given values, we get: Length = (11\(\Omega\) x 4 x 10^-8m²) / 1.1 x 10^-6\(\Omega\)m Simplifying the expression by canceling units, we get: Length = 0.4m Therefore, the length of the constantan wire required to make a resistor of 11\(\Omega\) is 0.4 meters.

Awọn alaye Idahun

The weight of a body on a planet depends on the gravitational pull on that planet, which is determined by the planet's mass and radius. If the pull of gravity on the planet is \(\frac{1}{8}\) that on earth, then the weight of the body will be \(\frac{1}{8}\) of its weight on earth. We know that the weight of the body on earth is 80N, and the weight on the planet will be \(\frac{1}{8}\) of this, which is: 80N * \(\frac{1}{8}\) = 10N Therefore, the weight of the body on the planet is 10N. Now, let's determine the mass of the body on the planet. Mass is a fundamental property of a body that does not change with the gravitational pull of a planet. Therefore, the mass of the body on the planet will be the same as its mass on earth, which is 8kg. Hence, the mass and weight of the body on the planet where the pull of gravity is \(\frac{1}{8}\) that on earth are 8kg and 10N respectively. Answer: \boxed{8kg, 10N}

Awọn alaye Idahun

The statement that is not a reason for using soft iron in making the core of a transformer is "retains its magnetism for a long time." In a transformer, the core is responsible for transferring energy between the primary and secondary coils. Soft iron is commonly used as the material for the core because it is easily magnetized and demagnetized, making it ideal for transforming alternating current (AC) electricity. When AC electricity flows through the primary coil, it creates a magnetic field in the core, which then induces a voltage in the secondary coil. Soft iron is preferred for the core because it can easily and quickly magnetize and demagnetize in response to changes in the AC current. Additionally, soft iron has a low coercivity, which means it requires a relatively small amount of energy to demagnetize. This reduces energy loss due to hysteresis, which is the energy lost when a magnetic material is repeatedly magnetized and demagnetized. However, soft iron does not retain its magnetism for a long time like a permanent magnet would. This property is not necessary for the function of a transformer, so it is not a reason for using soft iron as the core material.

Awọn alaye Idahun

Awọn alaye Idahun

The energy required to change a solid to a liquid at constant temperature is called the "latent heat of fusion." When a solid is heated to its melting point, it absorbs energy in the form of heat. However, this heat does not result in an increase in the temperature of the solid; instead, it is used to break the bonds holding the molecules of the solid together. As a result, the solid begins to melt, and the temperature remains constant until all of the solid has turned into liquid. The amount of energy required to break these bonds and turn a solid into a liquid is called the latent heat of fusion. This energy is needed because the bonds between molecules in a solid are much stronger than the bonds between molecules in a liquid. Therefore, it requires a lot of energy to overcome these bonds and change the state of matter from solid to liquid, even though the temperature remains constant.

Awọn alaye Idahun

Awọn alaye Idahun

When two capacitors are connected in parallel, their total capacitance is the sum of their individual capacitances. Therefore, the total capacitance in this case is: C_total = C_1 + C_2 = 0.4\(\mu F\) + 0.5\(\mu F\) = 0.9\(\mu F\) The charge acquired by each capacitor is given by: Q = C * V where Q is the charge, C is the capacitance, and V is the voltage. For the 0.4\(\mu F\) capacitor, the charge acquired is: Q_1 = C_1 * V = 0.4\(\mu F\) * 50V = 20\(\mu C\) For the 0.5\(\mu F\) capacitor, the charge acquired is: Q_2 = C_2 * V = 0.5\(\mu F\) * 50V = 25\(\mu C\) Therefore, the total charge acquired is the sum of the charges acquired by each capacitor: Q_total = Q_1 + Q_2 = 20\(\mu C\) + 25\(\mu C\) = 45\(\mu C\) Therefore, the correct answer is 45\(\mu C\).

Awọn alaye Idahun

Awọn alaye Idahun

The speed of sound waves depends on the medium through which they travel. In general, sound waves travel fastest through solid materials, slower through liquids, and slowest through gases. Vacuum is a space devoid of any matter, so sound cannot travel through it. Therefore, the option of vacuum is eliminated. Air is a gas and sound waves can travel through it. However, since the molecules in gases are further apart compared to liquids and solids, sound waves travel slower through air than through solids and liquids. Wood and Iron are both solid materials, and sound waves can travel through them easily. However, sound waves travel faster through denser materials like iron, which has a higher speed of sound than wood. Therefore, the answer is Iron. Sound waves travel fastest through iron among the given options.

Awọn alaye Idahun

The speed of a wave is defined as the distance traveled by the wave per unit time. In this case, the speed of the wave is given as 0.2 m/s. The period of a wave is the time taken for one complete oscillation or cycle. It is given by the formula: Period = Distance/Speed In this case, the distance between two points in phase on the wave is given as 5 cm, which is equivalent to 0.05 m. Therefore, substituting the values given into the formula above, we get: Period = 0.05 m / 0.2 m/s = 0.25 s Therefore, the period of the wave is 0.25 seconds. , which is 0.25s, is the correct answer.

Awọn alaye Idahun

When radio waves travel from air to water, they change direction due to the change in speed caused by the change in medium. The speed of light in a vacuum is the fastest possible speed, denoted by "c" and equal to 3.0 x 10^8 m/s. The refractive index of a medium is the ratio of the speed of light in a vacuum to the speed of light in that medium, denoted by "n". The formula for calculating the speed of light in a medium is: v = c/n where v is the speed of light in the medium. In this case, the speed of light in air is 3.0 x 10^8 m/s and the refractive index of water is 4/3. So, v = (3.0 x 10^8 m/s) / (4/3) v = (3.0 x 10^8 m/s) x (3/4) v = 2.25 x 10^8 m/s Therefore, the speed of radio waves in water is 2.25 x 10^8 m/s, which is option (C).

Awọn alaye Idahun

The frequency of a swinging pendulum is the number of complete oscillations the pendulum makes in a second. An oscillation is one complete back-and-forth motion of the pendulum. The time taken to complete one oscillation is known as the period, which is the reciprocal of frequency. The period of a pendulum depends on the length of the pendulum and the acceleration due to gravity. The longer the pendulum, the slower it swings and the greater the period. Similarly, the greater the acceleration due to gravity, the faster the pendulum swings and the smaller the period. The frequency of a pendulum is an important characteristic that can be used to determine the length of a pendulum or the acceleration due to gravity.

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

To calculate the coefficient of sliding friction, we need to use the equation: frictional force = coefficient of sliding friction x normal force First, let's calculate the initial kinetic energy of the body: Kinetic energy = 0.5 x mass x velocity^2 = 0.5 x 25 x (3)^2 = 112.5 J Next, we need to calculate the work done by the frictional force, which is equal to the initial kinetic energy minus the final kinetic energy (since the body comes to rest): Work done by friction = initial kinetic energy - final kinetic energy = 112.5 - 0 = 112.5 J Now, let's calculate the frictional force: Frictional force = work done by friction / distance = 112.5 / 2.50 = 45 N Finally, we can calculate the coefficient of sliding friction: Coefficient of sliding friction = frictional force / normal force To find the normal force, we can use Newton's second law of motion: Sum of forces = mass x acceleration Since the body is at rest, the acceleration is 0, and the sum of forces is equal to the weight of the body: Sum of forces = weight = mass x gravity = 25 x 10 = 250 N Therefore, the normal force is 250 N. Now we can calculate the coefficient of sliding friction: Coefficient of sliding friction = frictional force / normal force = 45 / 250 = 0.18 Therefore, the coefficient of sliding friction is 0.18. Answer: The coefficient of sliding friction is 0.18.

Awọn alaye Idahun

The amplitude of a wave is the maximum displacement of a particle in the wave from its equilibrium position. In simpler terms, it refers to the height or depth of a wave from its rest position to its highest or lowest point. For example, in an ocean wave, the amplitude would be the distance from the water level at rest to the crest (highest point) of the wave or to the trough (lowest point) of the wave. The greater the amplitude of a wave, the more energy it carries.

Awọn alaye Idahun

The charge on either plate of a capacitor is given by the formula: Q = C × V Where Q is the charge, C is the capacitance, and V is the potential difference between the plates of the capacitor. In this problem, the capacitance of the parallel plate capacitor is given as 600\(\mu F\) and the potential difference between the plates is given as 200V. Therefore, using the above formula, we can calculate the charge on either plate as follows: Q = C × V = 600 × 10^-6 F × 200 V = 0.12 C So the charge on either plate of the capacitor is 0.12 C, which is equal to 1.2 coulombs (since 1 coulomb is equal to 1 C). Therefore, the answer is: 1.2C.

Awọn alaye Idahun

The ability of a material to store an electric charge when its plates are at different potentials is referred to as capacitance. Capacitance is the property of a material or device that allows it to store electrical energy in an electric field. A capacitor is a device that is designed to have a certain amount of capacitance. It consists of two conductive plates separated by a non-conductive material, called a dielectric. When a voltage is applied across the plates, charge builds up on the surfaces of the plates, creating an electric field between them. The amount of charge that can be stored on the plates for a given voltage is determined by the capacitance of the capacitor. In simpler terms, capacitance is like a bucket that can hold a certain amount of water. The amount of water that can be held depends on the size of the bucket, just as the amount of charge that can be stored in a capacitor depends on its capacitance.

Awọn alaye Idahun

The efficiency of a cell is defined as the ratio of the electrical energy output to the chemical energy input. In other words, it is the ratio of the useful output power to the total input power. The useful output power is the power delivered to the external load, while the total input power is the sum of the useful output power and the power dissipated in the internal resistance of the cell. In this case, the external resistor has a resistance of 3\(\Omega\), and the internal resistance of the cell is 1\(\Omega\). The current flowing through the circuit can be calculated using Ohm's law: I = V / R where I is the current, V is the voltage, and R is the total resistance of the circuit. The total resistance of the circuit is the sum of the external resistance and the internal resistance: R_total = R_external + R_internal = 3\(\Omega\) + 1\(\Omega\) = 4\(\Omega\) The voltage across the external resistor can be calculated using Ohm's law again: V_external = I * R_external The current flowing through the circuit can be calculated using Ohm's law: I = V / R_total where V is the voltage across the cell and the external resistor. The power delivered to the external resistor is given by: P_external = V_external * I The power dissipated in the internal resistance is given by: P_internal = I^2 * R_internal The total input power is the sum of the useful output power and the power dissipated in the internal resistance: P_input = P_external + P_internal The efficiency of the cell is given by: efficiency = P_external / P_input Substituting the expressions for P_external, P_internal, and P_input, we get: efficiency = V_external * I / (V_external * I + I^2 * R_internal) Simplifying this expression and substituting the values given in the problem, we get: efficiency = 3 / 4 = 0.75 or 75% Therefore, the correct answer is 75%.

Awọn alaye Idahun

When a body is acted upon by a couple, it undergoes rotational motion. A couple is a pair of equal and opposite forces that are not in the same line of action. When these forces are applied to a body, they create a turning effect or torque that causes the body to rotate around a fixed axis. This rotation is known as rotational motion. In contrast, vibrational motion refers to the back-and-forth or oscillatory motion of a body around its equilibrium position, while translational motion refers to the straight-line motion of a body from one point to another. Random motion is the unpredictable and chaotic motion of particles in a gas or liquid. Therefore, the correct answer is: "rotational."

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

The thrust on the rocket is given by the equation: T = (dm/dt) * v where dm/dt is the rate of change of mass (i.e., the rate at which fuel is being consumed), and v is the velocity of the ejected gas. Substituting the given values, we get: T = (5.0 x 10^-2 kg/s) * (4 x 10^3 m/s) T = 200 N Therefore, the thrust on the rocket is 200 N. This means that for every second that the rocket engine is running, it is producing a force of 200 N that propels the rocket forward. The force is created by the reaction of the ejected gas pushing against the rocket, in accordance with Newton's Third Law of Motion.

Awọn alaye Idahun

The energy evolved in stabilizing the nucleus of nitrogen can be calculated using Einstein's famous equation E = mc², where E is the energy, m is the mass defect and c is the speed of light. The mass defect is the difference between the total mass of the individual protons and neutrons and the mass of the nucleus. We can calculate the mass defect of nitrogen-14 as follows: Mass of 7 protons = 7 × 1.0089\(\mu\) = 7.0623\(\mu\) Mass of 7 neutrons = 7 × 1.0089\(\mu\) = 7.0623\(\mu\) Total mass of protons and neutrons = 14.1246\(\mu\) Mass of nitrogen-14 = 14.0031\(\mu\) Mass defect = (14.1246 - 14.0031)\(\mu\) = 0.1215\(\mu\) Converting the mass defect to kilograms, we get: Mass defect = 0.1215\(\mu\) × 1.67 x 10^-27 kg/1\(\mu\) = 2.02905 x 10^-26 kg Using the given speed of light, we can now calculate the energy: E = (2.02905 x 10^-26 kg) × (3.0 x 10⁸ m/s)² = 1.826145 x 10^-11 J However, the energy evolved in stabilizing one nitrogen-14 nucleus involves the fusion of two nuclei of hydrogen-1 (protons). Therefore, we need to divide the above result by two to get the energy evolved in stabilizing one nitrogen-14 nucleus: Energy evolved in stabilizing one nitrogen-14 nucleus = 1.826145 x 10^-11 J ÷ 2 = 9.130725 x 10^-12 J Therefore, the answer is option D - 2.332 x 10^-9 J (rounded to three significant figures).

Awọn alaye Idahun

The source of energy that is renewable is the sun. The sun is a renewable energy source because it constantly produces energy through nuclear fusion. This means that as long as the sun exists, it will continue to produce energy. Solar energy is harnessed through the use of solar panels which capture the sun's energy and convert it into electricity. On the other hand, petroleum, coal, and uranium are all non-renewable sources of energy because they are finite resources. Once they are used up, they cannot be replenished. These resources take millions of years to form, and we are using them at a much faster rate than they can be replenished. This is why they are considered non-renewable. Therefore, we need to focus on using renewable energy sources such as solar, wind, and hydropower to reduce our reliance on non-renewable sources and to create a more sustainable energy system for the future.

Awọn alaye Idahun

Definite structure of solids (kinetic theory). According to the kinetic theory of matter, the molecules of a solid are very closely packed together in a regular, orderly arrangement (a lattice) and are held in position by strong intermolecular forces of attraction.

Because these forces are strong, the molecules cannot move about freely from place to place; they can only vibrate to and fro about fixed mean positions. Since each molecule keeps to a fixed position within the ordered lattice, the solid maintains a fixed arrangement of its particles.

This fixed, orderly packing gives a solid both a definite shape and a definite volume, that is, a definite structure.

Awọn alaye Idahun

(a) The sketch below shows the energy distribution of a simple pendulum during simple harmonic motion.

At each extreme position, the bob is momentarily at rest, so its potential energy is maximum and its kinetic energy is zero. At the mean (lowest) position, its speed is greatest, so its kinetic energy is maximum and its potential energy is minimum.

(b) Comparing

\[x=2.5\sin(0.4\pi t)\ \text{cm}\]

with \(x=A\sin \omega t\),

\[A=2.5\ \text{cm}=2.5\times10^{-2}\ \text{m},\qquad \omega=0.4\pi\ \text{rad s}^{-1}.\]

(i) Maximum velocity

\[v_{\max}=A\omega\]

\[=2.5\times10^{-2}\times0.4\pi\]

\[=3.142\times10^{-2}\ \text{m s}^{-1}.\]

(ii) Maximum acceleration

\[a_{\max}=A\omega^2\]

\[=2.5\times10^{-2}(0.4\pi)^2\]

\[=3.95\times10^{-2}\ \text{m s}^{-2}.\]

(c)(i)

\[\sqrt{\frac{k}{m}}=\omega\]

is the angular frequency of the oscillation. It is the rate of change of phase (angular displacement) and is measured in \(\text{rad s}^{-1}\).

(c)(ii)

Given \(m=0.30\ \text{kg}\), \(k=30\ \text{N m}^{-1}\), \(A=0.015\ \text{m}\),

\[\omega^2=\frac{k}{m}=\frac{30}{0.30}=100\ \text{s}^{-2}.\]

(i) Maximum kinetic energy

\[K_{\max}=\frac{1}{2}mA^2\omega^2=\frac{1}{2}kA^2\]

\[=\frac{1}{2}\times30\times(0.015)^2\]

\[=3.375\times10^{-3}\ \text{J}\approx3.38\times10^{-3}\ \text{J}.\]

(ii) Maximum tension in the spring

The maximum tension occurs at the lowest position, where the extension is greatest:

\[T_{\max}=mg+kA\]

\[=(0.30\times10)+(30\times0.015)\]

\[=3.45\ \text{N}.\]

Awọn alaye Idahun

(a) Surface tension. Surface tension is the property of the free surface of a liquid by which it behaves like a stretched elastic membrane (skin) and tends to contract so as to occupy the smallest possible surface area. It arises because the molecules at the surface experience a net inward cohesive pull from the molecules below them.

(b) Methods of reducing the surface tension of a liquid:

• Raising the temperature of the liquid.
• Adding an impurity such as soap or detergent to the liquid.

Awọn alaye Idahun

(a)

(i) Refraction of a wave is the change in direction of a wave when it passes obliquely from one medium to another in which its speed is different.

(ii) Critical angle is the angle of incidence in the optically denser medium for which the angle of refraction in the less dense medium is \(90^\circ\).

(b)(i) Conditions for total internal reflection

1. The wave must travel from an optically denser medium to an optically less dense medium.
2. The angle of incidence in the denser medium must be greater than the critical angle.

(b)(ii) Conditions for formation of an interference pattern

1. There must be two or more coherent wave sources, that is, sources of the same frequency having a constant phase difference.
2. The sources must be close together, with their separation of the order of the wavelength, so that the waves overlap.

(c)

The distance between successive crests is the wavelength:

\[\lambda=0.45\,\text{m},\qquad v=3.6\,\text{m s}^{-1}\]

Using \(v=f\lambda\),

\[f=\frac{v}{\lambda}=\frac{3.6}{0.45}=8.0\,\text{Hz}.\]

(d)(i) The ray bends towards the normal as it enters the glass, which is optically denser than air.

(d)(ii)

By Snell's law,

\[n=\frac{\sin i}{\sin r}\]

\[\sin r=\frac{\sin30^\circ}{1.50}=\frac{0.5}{1.50}=0.3333\]

\[r=\sin^{-1}(0.3333)=19.5^\circ\]

Therefore, the angle of deviation is

\[d=i-r=30.0^\circ-19.5^\circ=10.5^\circ.\]

Awọn alaye Idahun

The text of this item is garbled by OCR (two separate questions have run together). The self-contained projectile part is answered below.

Problem: A stone is thrown horizontally from the top of a vertical wall with a velocity of \( 15\,\text{m s}^{-1} \) and strikes the horizontal ground at a point 45 m from the base of the wall. Find the height of the wall. \( (g = 10\,\text{m s}^{-2}) \)

Horizontal motion: the horizontal velocity is constant, so the time of flight is \[ t = \dfrac{\text{horizontal range}}{\text{horizontal velocity}} = \dfrac{45}{15} = 3\,\text{s}. \]

Vertical motion: the stone falls freely from rest vertically, so the height of the wall is \[ h = \tfrac{1}{2} g t^2 = \tfrac{1}{2} \times 10 \times 3^2 = 45\,\text{m}. \]

The height of the wall is 45 m.

Awọn alaye Idahun

(a) Specific latent heat. The specific latent heat of a substance is the quantity of heat required to change the state of unit mass (1 kg or 1 g) of the substance, at constant temperature, without any change in its temperature (fusion = solid to liquid; vaporization = liquid to vapour).

(b)(i) Determination of specific latent heat of fusion of ice by method of mixtures. Pour a known mass \( m_w \) of warm water at a measured temperature \( \theta_1 \) into a calorimeter of known mass and specific heat capacity. Take small pieces of dry, melting ice at \( 0^\circ\text{C} \), add them to the water and stir until all the ice just melts. Measure the final steady temperature \( \theta_2 \) and, by re-weighing, find the mass \( m_i \) of ice added. Then, heat lost by the warm water and calorimeter equals heat used to melt the ice plus heat used to warm the melted ice from \( 0^\circ\text{C} \) to \( \theta_2 \):

\[ (m_w c_w + m_c c_c)(\theta_1 - \theta_2) = m_i L + m_i c_w (\theta_2 - 0). \]

From this equation the specific latent heat of fusion of ice, L, is calculated.

(ii) Precautions:

• Dry the ice with blotting paper before adding it, to remove surface water.
• Lag (insulate) the calorimeter and stir gently, to reduce heat exchange with the surroundings.

(c) Calculation. Heat needed to melt the 20 g of ice: \[ Q = m_i L_{ice} = 20 \times 340 = 6800\,\text{J}. \]

Let the mass of steam that condenses be x grams. The steam condenses at \( 100^\circ\text{C} \) and the resulting water cools to \( 0^\circ\text{C} \), supplying the heat that melts the ice: \[ x\,L_{steam} + x\,c_w(100 - 0) = 6800 \] \[ x(2300) + x(4.2)(100) = 6800 \] \[ x(2300 + 420) = 6800 \Rightarrow x = \dfrac{6800}{2720} = 2.5\,\text{g}. \]

Total mass of water in the container = original water + melted ice + condensed steam: \[ 100 + 20 + 2.5 = 122.5\,\text{g}. \]

Awọn alaye Idahun

The stem contains OCR noise (latent-heat constants merged in). The self-contained projectile part is answered.

Problem: A ball is projected horizontally from a height of 20 m above the ground with an initial velocity of \( 0.4\,\text{m s}^{-1} \). Find the horizontal distance moved before it hits the ground. \( (g = 10\,\text{m s}^{-2}) \)

Time of flight (vertical fall from rest): \[ h = \tfrac{1}{2} g t^2 \Rightarrow t = \sqrt{\dfrac{2h}{g}} = \sqrt{\dfrac{2 \times 20}{10}} = \sqrt{4} = 2\,\text{s}. \]

Horizontal distance (constant horizontal velocity): \[ x = u \times t = 0.4 \times 2 = 0.8\,\text{m}. \]

The horizontal distance moved is 0.8 m.

Awọn alaye Idahun

(a) Elastic limit. The elastic limit of a material is the maximum load (or stress) that the material can experience and still return exactly to its original length and shape when the load is removed. If the load exceeds the elastic limit, the material is permanently (plastically) deformed.

(b) Hooke's law of elasticity. Provided the elastic limit is not exceeded, the extension of an elastic material is directly proportional to the applied force (load) producing it.

\[ F = k e, \]

where F is the applied force, e is the extension, and k is the force constant (elastic constant) of the material.

Awọn alaye Idahun

(a)(i)(I) Electric potential at a point in an electric field is the work done in bringing a unit positive charge from infinity to that point.

(a)(i)(II) Electric potential energy of a charge at a point is the work done in bringing that charge from infinity to the point in the electric field.

(a)(ii) SI units: electric potential is measured in the volt (V); electric potential energy is measured in the joule (J).

(b)(i) Electric field intensity at the surface of the charged sphere: \[ E = \dfrac{Q}{4\pi \varepsilon_o r^2}. \]

(b)(ii) Electric potential at the surface of the sphere: \[ V = \dfrac{Q}{4\pi \varepsilon_o r}. \]

(b)(iii) Relationship between them: \[ E = \dfrac{V}{r}\quad(\text{i.e. } V = E r). \]

(c)(i) Electric field intensity between the plates: \[ E = \dfrac{V}{d} = \dfrac{5.0 \times 10^{4}}{5.0 \times 10^{-3}} = 1.0 \times 10^{7}\,\text{V m}^{-1}. \]

(c)(ii) Force on the electron: \[ F = eE = 1.60 \times 10^{-19} \times 1.0 \times 10^{7} = 1.6 \times 10^{-12}\,\text{N}. \]

(c)(iii) Acceleration of the electron: \[ a = \dfrac{F}{m} = \dfrac{1.6 \times 10^{-12}}{9.1 \times 10^{-31}} = 1.76 \times 10^{18}\,\text{m s}^{-2}. \]

Awọn alaye Idahun

(a)(i) Two differences between nuclear fusion and nuclear fission:

(a)(ii) Two peaceful uses of atomic energy:

• Generation of electricity in nuclear power stations.
• Production of radioisotopes used in medicine (radiotherapy) and in agriculture/industry (tracers).

(b)(i) Chain reaction: a self-sustaining nuclear reaction in which the neutrons released by the fission of one nucleus go on to cause the fission of further nuclei, each of which releases still more neutrons, so that the process continues on its own.

(b)(ii)(I) A necessary condition: there must be at least a critical mass of the fissile material present.

(b)(ii)(II) Two control components in a nuclear reactor: control rods (of boron or cadmium) that absorb excess neutrons, and a moderator (such as graphite or heavy water) that slows down the neutrons.

(c)(i) The reaction \( {}^{2}_{1}\text{H} + {}^{3}_{1}\text{H} \rightarrow {}^{4}_{2}\text{He} + {}^{1}_{0}n + \text{energy} \) is a nuclear fusion reaction (light nuclei combining).

(c)(ii) Decay constant: \[ \lambda = \dfrac{0.693}{t_{1/2}} = \dfrac{0.693}{5.40 \times 10^{3}} = 1.28 \times 10^{-4}\,\text{s}^{-1}. \]

Awọn alaye Idahun

Wave-particle paradox (wave-particle duality). The wave-particle paradox is the observation that light (and, in general, radiation and matter) sometimes behaves as a wave and at other times behaves as a stream of particles, even though these two descriptions appear to be contradictory in classical physics.

Wave behaviour of light is shown by phenomena such as interference, diffraction and polarization, which can only be explained if light travels as a continuous wave.

Particle behaviour of light is shown by phenomena such as the photoelectric effect and the Compton effect, which can only be explained if light is made up of discrete packets of energy called photons, each of energy \( E = hf \).

No single experiment shows both behaviours at the same time: light behaves as a wave while it is being propagated, but as particles (photons) when it interacts with matter (emission or absorption). Louis de Broglie extended this idea to matter, proposing that moving particles such as electrons also have an associated wavelength \( \lambda = h/p \), which was later confirmed by electron diffraction. This dual nature, not resolvable by classical physics, is the wave-particle paradox.

Awọn alaye Idahun

Light is a transverse wave. In an unpolarized light wave, the vibrations occur randomly in all directions perpendicular to the direction of travel.

To produce plane-polarized light, pass the unpolarized light through a Polaroid sheet (polarizer). The Polaroid transmits only the component of vibration parallel to its transmission axis and absorbs the components in other directions. The emergent wave therefore vibrates in one direction only and is said to be plane polarized.

In the diagram, the transmitted electric-field vibrations are all vertical, parallel to the transmission axis of the polarizer. Thus, they are restricted to one plane containing the direction of propagation.

Awọn alaye Idahun

(a) Cations are positively charged ions formed when an atom or group of atoms loses one or more electrons. During electrolysis, they move towards the cathode, which is the negative electrode. Examples are \(\mathrm{H^+}\), \(\mathrm{Na^+}\), \(\mathrm{Cu^{2+}}\) and \(\mathrm{Ag^+}\).

(b) A labelled electrolytic cell is shown below.

Awọn alaye Idahun

(a) Principle of operation of a fluorescent tube. When an electric discharge is passed through mercury vapour at low pressure inside the tube, the mercury atoms are excited and emit ultraviolet radiation. This ultraviolet radiation strikes the fluorescent powder (phosphor) coated on the inside wall of the tube, causing it to fluoresce, that is, to absorb the ultraviolet and re-emit the energy as visible light.

(b) Factors on which the colour of the light depends:

• The nature (chemical composition) of the fluorescent powder (phosphor) coating the inside of the tube.
• The type of gas or vapour used in the tube (and its pressure).

Awọn alaye Idahun

None