Nkojọpọ....
|
Tẹ mọ́ & Dì mú láti fà yíká. |
|||
|
Tẹ ibi lati pa |
|||
Ibeere 1 Ìròyìn
Name the type of equilibrium for each position of the ball
Ibeere 2 Ìròyìn
Surface tension is a property of liquids that arises due to the cohesive forces between the molecules at the surface. It can be thought of as the "skin" or "film" that forms on the surface of a liquid.
Considering the options given:
- Water: Water molecules have strong cohesive forces, allowing them to form hydrogen bonds with each other. As a result, water has relatively high surface tension.
- Mercury: Mercury is a metal with metallic bonding, which is much stronger than the cohesive forces in liquids. As a result, mercury has very high surface tension.
- Oil: Oils typically consist of nonpolar molecules, which have weaker cohesive forces compared to polar molecules like water. Therefore, oil generally has lower surface tension than water.
Based on this information, we can conclude that mercury has the highest surface tension among these liquids.
Ibeere 3 Ìròyìn
Ibeere 4 Ìròyìn
The process responsible for the production of energy in stars is nuclear fusion.
Nuclear fusion is the process where two or more atomic nuclei come together to form a heavier nucleus. In stars, the fusion of hydrogen nuclei (protons) into helium nuclei is the main source of energy.
Here's how it works:
This ongoing fusion process in stars is called stellar nucleosynthesis. It occurs throughout the star's lifetime until the available hydrogen in the core is depleted. At this point, depending on the star's mass, different fusion reactions may take place, leading to the production of heavier elements.
In summary, nuclear fusion, the fusion of hydrogen nuclei into helium nuclei, is the process responsible for the production of energy in stars.
Ibeere 5 Ìròyìn
The name of the model of the atom that describes electrons as orbiting the nucleus in specific energy levels is the Bohr model.
The Bohr model was proposed by Danish physicist Niels Bohr in 1913. According to this model, electrons revolve around the nucleus in specific energy levels or shells. Each energy level corresponds to a certain amount of energy that an electron possesses. The energy levels are represented by whole numbers, with the closest energy level to the nucleus having the lowest energy and subsequent energy levels having higher energies.
Bohr's model also stated that electrons can only exist in certain fixed orbits around the nucleus. These orbits have a specific distance from the nucleus and are called stationary states. Electrons can move between these energy levels by absorbing or emitting energy in the form of photons.
The Bohr model successfully explained the observed emission and absorption spectra of atoms, as well as the stability of atoms. However, it has limitations in fully describing the behavior of electrons. It does not accurately represent the path or trajectory of electrons and does not account for other quantum effects.
Overall, the Bohr model provides a simplified and understandable framework for visualizing the arrangement of electrons in an atom, with electrons occupying specific energy levels or shells around the nucleus.
Ibeere 6 Ìròyìn
Ibeere 7 Ìròyìn
Which of the following statements regarding the application of electrical conduction via gases is/are correct?
Electrical conduction in gas is applied in:
(i) The identification of gases
(ii) Lighting/fluorescent tubes
(iii) Photocells
(iv) Cathode ray oscilloscope/T.V. tubes
Ibeere 8 Ìròyìn
A 200 kg load is raised using a 110 m long lever as shown in the diagram above. The load is 10m from the pivot P. If the efficiency of the the lever is 80%, find the effort E required to lift the load.
[Take g = 10ms-2]
Ibeere 9 Ìròyìn
Which of the following is/are not true about the heat capacity of a substance?
(i) It is an intensive property
(ii) Its S.I unit is \(jK^{-1}\)
(iii) It is an extensive property
(iv) Its S.I unit is \(jkg^{-1}\)
Ibeere 10 Ìròyìn
A wave that is both mechanical and longitudinal is sound waves.
Sound waves are created by the vibration of an object, such as a speaker, which causes the air particles around it to vibrate. These vibrations then travel through the air in the form of a wave.
Sound waves are classified as mechanical waves because they require a medium, such as air, water, or solid objects, to travel through. Without a medium, sound waves cannot propagate.
Furthermore, sound waves are classified as longitudinal waves because the particles in the medium vibrate parallel to the direction of the wave. This means that as the sound wave travels, the particles in the medium move back and forth in the same direction as the wave itself.
In contrast, water waves and seismic waves are mechanical waves, but they are not longitudinal. Water waves are categorized as transverse waves because the particles in the water move up and down at right angles to the direction of the wave. Seismic waves, which include earthquake waves, can be both transverse and longitudinal, but typically the primary seismic waves are classified as transverse waves.
Lastly, light waves are not mechanical waves but rather electromagnetic waves. They do not require a medium to travel through and can propagate in a vacuum, unlike sound waves.
Ibeere 11 Ìròyìn
Ibeere 12 Ìròyìn
A pyrometer thermometer measures temperature from the thermal radiation emitted by objects.
When objects are heated, they emit thermal radiation, which is a form of electromagnetic radiation. This radiation is primarily in the infrared wavelength range. A pyrometer thermometer is specifically designed to measure the intensity of this thermal radiation and convert it into a temperature reading.
The pyrometer thermometer works based on the principle of measuring the amount of thermal radiation reaching the sensor. This is done using a detector that is sensitive to the infrared wavelength range. The detector absorbs the thermal radiation emitted by the object and generates an electrical signal proportional to the intensity of the radiation.
The electrical signal from the detector is then processed by the thermometer's electronics to calculate and display the corresponding temperature. The calibration of the thermometer ensures accurate temperature readings based on the known relationship between the intensity of thermal radiation and temperature.
Pyrometer thermometers are commonly used in industrial applications where contact-based temperature measurement methods are not feasible or accurate enough. They can measure temperatures of objects from a distance without physically touching them, which makes them suitable for measuring high temperatures, moving objects, or objects in hazardous or inaccessible environments.
Therefore, the pyrometer thermometer is the correct option for measuring temperature from thermal radiation emitted by objects.
Ibeere 13 Ìròyìn
To determine the number of turns on the primary winding of a step-down transformer, we need to understand how a transformer works and how the voltage is transformed from the primary to the secondary winding.
A transformer operates on the principle of electromagnetic induction. When an alternating current flows through the primary winding, it creates a changing magnetic field that induces a voltage in the secondary winding.
The voltage ratio between the primary and secondary windings is determined by the ratio of the number of turns in each winding. This means that if we decrease the number of turns in the secondary winding compared to the primary winding, we can reduce the voltage output.
In this case, we are given that the secondary winding has 25 turns and we want to deliver 110 V. The primary winding has a higher voltage, which is 2.2 kV (kilovolts) or 2200 V.
To determine the number of turns on the primary winding, we can set up a simple equation using the voltage ratios:
Primary voltage / Secondary voltage = Primary winding turns / Secondary winding turns
Plugging in the values we have:
2200 V / 110 V = Primary winding turns / 25 turns
Simplifying the equation:
20 = Primary winding turns / 25
To solve for the number of turns on the primary winding, we can cross multiply:
20 x 25 = Primary winding turns
Therefore, the number of turns on the primary winding is 500.
So, the correct answer is 500.
Ibeere 14 Ìròyìn
The correct answer is The electric force is directed from the positive particle to the negative particle.
When a positively charged particle is placed near a negatively charged particle, they exert an attractive force on each other. This force is called the electric force.
According to Coulomb's Law, the electric force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
In this case, the positively charged particle has a positive charge and the negatively charged particle has a negative charge. Since opposite charges attract each other, the electric force between them is attractive.
Therefore, the electric force is directed from the positive particle to the negative particle.
Ibeere 15 Ìròyìn
Ibeere 16 Ìròyìn
When a water droplet is placed on a freshly cut piece of wood, it spreads out to form a thin layer because the wood is adhesive to water.
Adhesion is the attraction between different substances, in this case, water and wood. Wood is a porous material, meaning it has tiny holes or gaps in its surface. These tiny holes create a large surface area for the water droplet to interact with.
When the water droplet comes into contact with the wood, the adhesive forces between the water molecules and the wood molecules are stronger than the cohesive forces between the water molecules. This causes the water droplet to spread out, trying to maximize its contact with the wood surface.
The spreading out of the water droplet forms a thin layer because the wood surface is not completely smooth. Instead, it has irregularities and imperfections, which allow the water to seep into those gaps and spread out further.
Therefore, when a water droplet is placed on a freshly cut piece of wood, it spreads out to form a thin layer due to the adhesive forces between the water and the wood surface.
Ibeere 17 Ìròyìn
From the diagram above, if the potential difference across the resistor, capacitor and inductor are 60V, 120V and 30V respectively, the effective potential difference is
Ibeere 18 Ìròyìn
Ibeere 19 Ìròyìn
Ibeere 20 Ìròyìn
Ibeere 21 Ìròyìn
The electrolyte used in the Nickel-Iron (NiFe) accumulator is **potassium hydroxide solution**.
In a Nickel-Iron accumulator, the electrolyte is the substance that allows the flow of electric current between the electrodes. It is essential for the proper functioning of the accumulator.
Potassium hydroxide solution is the ideal electrolyte for the NiFe accumulator due to its properties. It has good electrical conductivity, which means it allows the movement of ions between the positive and negative electrodes, enabling the flow of electrons and facilitating the charging and discharging process.
In addition to good conductivity, potassium hydroxide solution also has other beneficial properties for the NiFe accumulator. It is stable, ensuring a longer lifespan for the accumulator. It is also less prone to self-discharge, meaning the accumulator can retain its charge for a longer period without significant loss.
Therefore, the electrolyte used in the Nickel-Iron (NiFe) accumulator is potassium hydroxide solution.
Ibeere 22 Ìròyìn
Ibeere 23 Ìròyìn
The property of wave shown in the diagram above is?
Ibeere 24 Ìròyìn
Ibeere 25 Ìròyìn
Three forces with magnitudes 16 N, 12 N and 21 N are shown in the diagram below. Determine the magnitude of their resultant force and angle with the x-axis
Ibeere 26 Ìròyìn
A beam of light traveling in water is incident on a glass which is immersed in the water. The incident beam makes an angle of \(40^\circ\) with the normal. Calculate the angle of refraction in the glass.
[Refractive index of water = 1.33, Refractive index of glass = 1.5]
Ibeere 27 Ìròyìn
Ibeere 28 Ìròyìn
Ibeere 29 Ìròyìn
A 35 kΩ is connected in series with a resistance of 40 kΩ. What resistance R must be connected in parallel with the combination so that the equivalent resistance is equal to 25 kΩ?
For the combination in series;
⇒R1 = 35kΩ + 40kΩ = 75kΩ
R is combined with 75kΩ in parallel to give 25kΩ
= 1Req
= 1R
+ 1R
= 125
= 1R
+ 175
= 125
- 175
+ 1R
= 3−175
= 1R
= 275
= 1R
= 752
= R
; R = 37.5k Ω
Ibeere 30 Ìròyìn
Ibeere 31 Ìròyìn
Ibeere 32 Ìròyìn
The sensitivity of a thermometer refers to the smallest temperature change that it can detect or measure. In other words, it measures how fine or precise the thermometer is in detecting changes in temperature. A thermometer with high sensitivity is able to detect even small changes in temperature, while a thermometer with low sensitivity may only detect larger temperature fluctuations.
Therefore, in the given options, the statement "the smallest temperature change that can be detected or measured" accurately describes the sensitivity of a thermometer.
Ibeere 33 Ìròyìn
An open-tube mercury manometer is used to measure the pressure in a gas tank. When the atmospheric pressure is 101,325 \(P_a\), what is the absolute pressure in \(P_a\) in the tank if the height of the mercury in the open tube is 25 cm higher
Ibeere 34 Ìròyìn
T=800N; I=50cm=0.5m,
m=10g=0.01kg
fundamental freq: fo
=?
fo
= 121√Tμ
μ =m1
=0.010.5
⇒ fo
=12×0.5
√8000.02
fo
⇒√ 40,000
⇒1st overtone = 2fo
=2×200 = 400Hz
⇒2nd overtone =3fo
=3×200=600Hz
∴3rd over tone= 4fo
=4×200=800Hz
Ibeere 35 Ìròyìn
Light of wavelength 589 nm in vacuum passes through a piece of fused quartz of index of refraction n = 1.458. What is the frequency of the light in fused quartz?
[Speed of light c = 3 *10^8ms-1]
Ibeere 36 Ìròyìn
Ibeere 37 Ìròyìn
In the diagram above, if the south poles of two magnets stroke a steel bar, the polarities at X and Y will respectively be
Ibeere 38 Ìròyìn
A charge of \(4.6 \times 10^{-5}\) C is placed in an electric field of intensity \(3.2 \times 10^{4}\ \mathrm{V\,m^{-1}}\). What is the force acting on the electron?
Ibeere 39 Ìròyìn
Ibeere 40 Ìròyìn
Ṣe o fẹ tẹsiwaju pẹlu iṣe yii?