JAMB UTME - Chemistry - 2022

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

The compound that exhibits resonance is benzene.

Awọn alaye Idahun

Carbon dioxide (CO2) has a linear molecular geometry, with two oxygen atoms bonded to the central carbon atom. Each bond between carbon and oxygen is a double bond, consisting of two pairs of electrons shared between the atoms. Therefore, there are two bonding pairs in each of the carbon-oxygen double bonds, giving a total of four bonding pairs in CO2. The answer is 4.

Awọn alaye Idahun

The pollutant that is usually present in a city that generates its electricity from coal is sulfur dioxide (SO2), also known as sulfur(iv)oxide. When coal is burned to generate electricity, sulfur compounds in the coal are released into the air as SO2. This gas can react with other pollutants and atmospheric conditions to form smog, which can be harmful to human health and the environment. Therefore, it is important to reduce the use of coal in electricity generation and promote cleaner and more sustainable energy sources to reduce the levels of SO2 and other harmful pollutants in the air.

Awọn alaye Idahun

Copper (II) tetraoxosulphate (IV), also known as copper sulfate or CuSO4, is widely used as a fungicide and a disinfectant. As a fungicide, copper sulfate is effective in controlling fungal diseases in plants, including mildew, leaf spots, and blights. It is also used as a fungicide in swimming pools to prevent the growth of algae. As a disinfectant, copper sulfate is effective in killing bacteria and viruses. It is used in a variety of applications, including in the production of animal feed, as a preservative for wood, and in water treatment to kill bacteria and algae. While copper sulfate has been used as a fertilizer in the past, its use in this capacity has largely been replaced by other compounds. It is not commonly used as a purifier.

Awọn alaye Idahun

The type of reaction involved when using H2SO4 to remove rust on the surface of iron is a redox reaction. This is because the sulfuric acid oxidizes the iron in the rust, converting it into iron(II) sulfate, while the acid itself is reduced to sulfur dioxide. The overall reaction can be written as follows: Fe2O3(s) + 3H2SO4(aq) → Fe2(SO4)3(aq) + 3H2O(l) In this reaction, the iron in Fe2O3 is oxidized from a +3 to a +2 oxidation state, while the sulfur in H2SO4 is reduced from a +6 to a +4 oxidation state. This transfer of electrons between the reactants is what defines a redox reaction.

Awọn alaye Idahun

Awọn alaye Idahun

Awọn alaye Idahun

The substance that is not a homogeneous mixture is flood water. Flood water is typically a mixture of various substances, such as sediment, dirt, debris, and organic matter, that have been carried along by the water. As such, flood water is usually a heterogeneous mixture, meaning that it does not have a uniform composition throughout. In contrast, filtered sea water, soft drinks, and writing ink are all examples of homogeneous mixtures, where the components are evenly distributed and the mixture has a uniform composition throughout.

Awọn alaye Idahun

The liquid is most likely to be option number 4: CH3OHCHOH2OH, which is also known as glycerol or glycerin. Glycerol has a high boiling point of 290°C, which is much higher than the boiling points of the other options. It is also a viscous liquid, which means it is thick and sticky. Glycerol is non-toxic, and it is often used in food, pharmaceuticals, and cosmetics. Furthermore, glycerol is miscible with water, which means that it can be easily mixed with water to form a homogeneous solution. It is also hygroscopic, which means that it can absorb water from the air. These properties make glycerol a useful substance in many applications, such as as a moisturizer in skincare products or as a humectant in food processing.

Awọn alaye Idahun

The sulphide commonly used in coating electric fluorescent tubes is Zinc Sulphide. Zinc Sulphide is a type of material that glows when it is exposed to ultraviolet light. When ultraviolet light is generated inside a fluorescent tube, it excites the Zinc Sulphide particles, causing them to emit visible light. This visible light is what we see as the bright light coming from the tube. So, Zinc Sulphide acts as a phosphor and helps in producing the bright light in fluorescent tubes.

Awọn alaye Idahun

Awọn alaye Idahun

The sub-atomic particles located in the nucleus of an atom are neutron and proton. The nucleus is the dense core of an atom that contains most of its mass. Protons are positively charged particles found in the nucleus, and they determine the atomic number of the element. Neutrons are neutral particles found in the nucleus, and they help stabilize the nucleus by balancing the repulsive forces between the positively charged protons. Electrons, on the other hand, are negatively charged particles that are located outside the nucleus in energy levels or shells. They are attracted to the positively charged nucleus by electrostatic forces and are involved in chemical bonding between atoms. The number of protons in the nucleus determines the identity of the element, while the number of neutrons determines its isotopes. Isotopes of an element have the same number of protons but different numbers of neutrons in the nucleus. In summary, the two sub-atomic particles located in the nucleus of an atom are neutron and proton.

Awọn alaye Idahun

Awọn alaye Idahun

The organic compound with a fishy smell is most likely to have the general formula RNH2, which represents a primary amine. Amines are organic compounds that contain a nitrogen atom bonded to one or more carbon atoms. Primary amines have one alkyl or aryl group and two hydrogen atoms bonded to the nitrogen atom. Some primary amines have a fishy smell, which is caused by the presence of volatile amines. These amines are small molecules that can easily evaporate and have a strong odor, similar to that of fish. Examples of compounds that have a fishy smell include trimethylamine, which is found in fish, and butylamine, which is used in the production of rubber and pharmaceuticals. In summary, the organic compound with a fishy smell is likely to have the general formula RNH2, which represents a primary amine.

Awọn alaye Idahun

The colored gas that is known to be poisonous and can readily damage the mucous lining of the lungs is chlorine. Chlorine is a highly reactive chemical element that is used in the production of many everyday products, such as paper, textiles, and plastics. It is also used as a disinfectant in swimming pools and water treatment plants. Inhaling chlorine gas can cause severe respiratory problems, including coughing, chest pain, and difficulty breathing. Prolonged exposure to chlorine can cause lung damage, and in extreme cases, it can be fatal. Chlorine gas is also highly irritating to the eyes, skin, and mucous membranes. It is important to handle chlorine with caution and to use appropriate protective gear, such as gloves and respiratory masks, when working with it. Proper ventilation and monitoring of chlorine levels are also essential to prevent exposure to this toxic gas.

Awọn alaye Idahun

To determine the oxidation number of oxygen in BaO2, we can use the fact that the overall charge of a compound must be zero. Barium (Ba) is a Group 2 element and has an oxidation state of +2. The compound BaO2 has no net charge, so the sum of the oxidation states of all the atoms must be zero. Let x be the oxidation state of oxygen in BaO2. Therefore, we have: (+2) + 2(x) = 0 Solving for x, we get: x = -1 Therefore, the oxidation number of oxygen in BaO2 is -1.

Awọn alaye Idahun

The function of sulphur during the vulcanization of rubber is to form chains which bind rubber molecules together.

Awọn alaye Idahun

The organic compound that liberates carbon(iv)oxide from trioxocarbonate(iv) solution is CH3COOH (acetic acid). When acetic acid is added to a solution of trioxocarbonate(iv) (carbonate) it reacts to form carbon(iv)oxide gas, water and a salt. The balanced chemical equation for the reaction is: 2CH3COOH + Na2CO3 → CO2 + 2H2O + 2NaCH3COO The carbon(iv)oxide gas is released as bubbles, causing the solution to fizz. Therefore, CH3COOH is the organic compound that liberates carbon(iv)oxide from trioxocarbonate(iv) solution.

Awọn alaye Idahun

Awọn alaye Idahun

Among the given options, only CuS will precipitate in dilute HCl. CuS is insoluble in dilute HCl, and hence it will precipitate when added to dilute HCl. However, the other options will dissolve in dilute HCl, and hence they will not precipitate. ZnS will dissolve in dilute HCl to form ZnCl2 and H2S. Na2S will react with dilute HCl to produce H2S and NaCl. FeS will dissolve in dilute HCl to form FeCl2 and H2S. Therefore, the correct answer is (4) CuS.

Awọn alaye Idahun

The white solid obtained when marble (calcium carbonate, CaCO3) is heated to 1473K is calcium oxide (CaO), also known as quicklime. When quicklime reacts vigorously with water, it forms calcium hydroxide (Ca(OH)2), which is an alkaline solution. Therefore, the solution obtained from the reaction of quicklime with water contains calcium hydroxide (Ca(OH)2).

Awọn alaye Idahun

The atomic number of an atom represents the number of protons in the nucleus of the atom. Since the atomic number given is 17, it means that there are 17 protons in the nucleus. The mass number of an atom represents the total number of protons and neutrons present in the nucleus. Therefore, if the mass number is given as 37, it means that the total number of protons and neutrons in the nucleus is 37. To determine the number of neutrons in the nucleus, we can subtract the atomic number (which represents the number of protons) from the mass number (which represents the total number of protons and neutrons). Thus, the number of neutrons in the atom with a mass number of 37 and an atomic number of 17 is: Number of neutrons = Mass number - Atomic number = 37 - 17 = 20 Therefore, the answer is 20.

Awọn alaye Idahun

Awọn alaye Idahun

The chemical widely used as a fertilizer is nitrochalk. Nitrochalk is a type of fertilizer that contains a mixture of ammonium nitrate and calcium carbonate. Ammonium nitrate provides the necessary nitrogen for plant growth, while calcium carbonate helps to balance the soil's pH level. This combination of nutrients helps to promote healthy plant growth and increase crop yields. Nitrochalk is commonly used in agriculture and gardening to fertilize crops such as corn, wheat, and soybeans, as well as fruits and vegetables.

Awọn alaye Idahun

The oxidizing and reducing properties of a substance depend on its ability to gain or lose electrons. A substance that can gain electrons acts as an oxidizing agent, while a substance that can lose electrons acts as a reducing agent. Among the given options, both Cl2 (chlorine gas) and SO2 (sulfur dioxide) can act as both oxidizing and reducing agents depending on the reaction conditions. - Cl2 can act as an oxidizing agent when it gains electrons to form Cl- ions, and it can act as a reducing agent when it loses electrons to form Cl+ ions. For example, in the reaction Cl2 + 2KBr → 2KCl + Br2, chlorine gas is acting as an oxidizing agent since it is gaining electrons from bromide ions to form bromine gas. However, in the reaction 2Cl- + Cl2 → 2Cl2-, chlorine gas is acting as a reducing agent since it is losing electrons to form chloride ions. - SO2 can act as an oxidizing agent when it gains electrons to form sulfite ions (SO32-), and it can act as a reducing agent when it loses electrons to form sulfur trioxide (SO3). For example, in the reaction SO2 + 2H2S → 3S + 2H2O, sulfur dioxide is acting as a reducing agent since it is losing electrons to form elemental sulfur. However, in the reaction 2SO32- + O2 → 2SO42-, sulfur dioxide is acting as an oxidizing agent since it is gaining electrons to form sulfate ions. H2S (hydrogen sulfide) and NH3 (ammonia) are not likely to act as both oxidizing and reducing agents under normal conditions. H2S tends to act as a reducing agent by donating electrons to oxidizing agents, while NH3 tends to act as a reducing agent by donating electrons to oxidizing agents or as a base by accepting protons.

Awọn alaye Idahun

The addition of sodium chloride to water to form a solution would lead to a decrease in freezing point and an increase in boiling point. This effect is known as colligative properties, which depend on the concentration of solute particles in a solution. When sodium chloride dissolves in water, it breaks down into sodium ions and chloride ions. These ions occupy space between water molecules and interfere with the formation of ice crystals during freezing. As a result, the freezing point of the solution is lowered below that of pure water. This is why we use salt to de-ice roads and sidewalks during the winter season. Similarly, the presence of solute particles in a solution also raises the boiling point of the solution. The increased concentration of solute particles in the solution causes a decrease in the vapor pressure of the solvent (water), making it harder for the solvent molecules to escape into the gas phase. This means that more energy is required to bring the solution to its boiling point compared to pure water. In summary, the addition of sodium chloride to water forms a solution with lower freezing point and higher boiling point compared to pure water.

Awọn alaye Idahun

Awọn alaye Idahun

The method employed in the preparation of salts will depend on the composition of the salt. Different salts have different chemical properties, and the method used to prepare them will depend on these properties. For example, some salts can be easily dissolved in water, while others are not very soluble and may require the use of a different solvent or special conditions to dissolve. The dissociating ability, stability to heat, and precipitating ability of the salt may also play a role in determining the preparation method, but the most important factor is the composition of the salt.

Awọn alaye Idahun

An acidic oxide is an oxide that reacts with water to form an acidic solution. Non-metals have a greater tendency to form acidic oxides than metals. Therefore, among the given options, the non-metal that does not form an acidic oxide with oxygen would be the one that does not react with water to form an acidic solution. Out of the given options, chlorine is the non-metal that does not form acidic oxides with oxygen. Chlorine reacts with oxygen to form a number of oxides such as chlorine monoxide (Cl2O), chlorine dioxide (ClO2), and chlorine trioxide (ClO3), but none of these oxides react with water to form an acidic solution. Instead, they react with water to form oxyacids or oxoacids such as hypochlorous acid (HClO), chlorous acid (HClO2), and chloric acid (HClO3), which are stronger acids than the oxides. Therefore, the correct answer is chlorine.

Awọn alaye Idahun

The shape of a molecule of CCl4 is tetrahedral.

Awọn alaye Idahun

Graphite is the option that conducts electricity.

Awọn alaye Idahun

The addition of charcoal to the filter bed of sand during water treatment for township supply is to remove odors and improve the taste of the water. Charcoal is a porous material that can adsorb impurities and chemicals from the water, such as dissolved organic matter that can contribute to unpleasant tastes and odors. This process helps to produce a better-quality drinking water that is free from unpleasant tastes and odors. It should be noted that while the addition of charcoal can help remove impurities, it does not kill germs or prevent tooth decay or goiter. Other water treatment methods, such as disinfection with chlorine or ultraviolet light, are required to kill harmful microorganisms and ensure the safety of the drinking water.

Awọn alaye Idahun

The most suitable catalyst for the given reaction is vanadium(V)oxide (V2O5). Vanadium(V)oxide is a commonly used catalyst for the oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3). The reaction is an exothermic reaction, and it occurs at high temperatures (around 450-500°C) in the presence of a catalyst. V2O5 is an effective catalyst for this reaction because it has a high surface area and can provide active sites for the reaction to occur. The vanadium ions in the V2O5 catalyst undergo redox reactions with the sulfur dioxide and oxygen molecules, which promotes the formation of sulfur trioxide. Chromium(VI)oxide and iron(III)oxide are not suitable catalysts for this reaction because they are not effective at promoting the oxidation of sulfur dioxide to sulfur trioxide. Copper(I)oxide can be used as a catalyst for the reaction, but it is not as effective as vanadium(V)oxide.

Awọn alaye Idahun

In the extraction of iron, hot air is introduced into the blast furnace through tuyeres. Tuyeres are nozzles that are located at the bottom of the blast furnace, and they are used to blow hot air into the furnace. The hot air helps to burn the coke (a fuel made from coal) which provides the heat needed to melt the iron ore. The air also helps to remove the waste gases that are produced during the reaction, allowing the iron to be extracted more efficiently.

Awọn alaye Idahun

The active component of baking powder is sodium bicarbonate (NaHCO3). It is responsible for the leavening or rising of baked goods by releasing carbon dioxide gas when it reacts with an acid. Other ingredients in baking powder, such as monocalcium phosphate and sodium aluminum sulfate, provide the acid component for the reaction to occur. Magnesium sulfate (MgSO4) and calcium sulfate (CaSO4) are not typically used in baking powder, and sodium chloride (NaCl) is simply table salt and not an active ingredient in leavening.

Awọn alaye Idahun

We can use the ideal gas law to solve this problem, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature in kelvin. If the volume and pressure are both increased by a factor of 4, then the new volume V' and new pressure P' are given by: V' = 4V P' = 4P Substituting these values into the ideal gas law, we get: (4P)(4V) = nR(T') Simplifying this equation, we get: 16PV = nRT' Dividing both sides by PV, we get: 16 = nRT' / PV Since n, R, and P are constant, we can simplify this to: 16 = T' / T Solving for T', we get: T' = 16T Therefore, the new temperature is 16 times the original temperature. Substituting T = 298 K, we get: T' = 16 x 298 K = 4768 K So the correct answer is 4768.0K.

Awọn alaye Idahun

The highest equilibrium yield of N2O4 would be produced at low temperature and low pressure. In a chemical reaction, the position of the equilibrium can be influenced by changing the temperature or pressure. A decrease in temperature or an increase in pressure favors the side of the reaction with the fewer moles of gas (in this case, N2O4). This means that, if the temperature is low and the pressure is low, there will be more N2O4 at equilibrium, as the reaction will shift to the right to counteract the reduction in the concentration of N2O4. So, low temperature and low pressure would produce the highest equilibrium yield of N2O4.