Finishing
Muhtasari
A product is not finished when the last cut is made. Bare wood absorbs water and stains, bare steel rusts, and a rough surface looks unmade and feels unpleasant. Finishing is the final stage that protects the material from its environment and makes the product look and feel the way it should. Choosing the right finish, and preparing the surface properly first, is what separates a workshop exercise from a product someone would buy.
This note covers finishing for woods, metals and polymers: protective finishes that defend against moisture, corrosion and wear; decorative finishes that change colour and appearance; the all-important surface preparation that every finish depends on; and the idea of self-finishing materials such as acrylic and many polymers that need no added coating at all. It explains why each finish suits its material and how to match the finish to where the product will be used.
Malengo
- select and use appropriate finishes for materials including: - decorative finishes - protective finishes
- show an understanding of self-finishing materials.
Maelezo ya Somo
Inapatikana kwenye programu ya Green Bridge
Pakua programu ya Green Bridge CBT kwenye simu yako au kompyuta yako ili kupata maelezo kamili ya masomo, maswali ya mazoezi, na mengi zaidi.
Tathmini ya Somo
Hongera kwa kukamilisha somo la Finishing. Sasa kwa kuwa umechunguza dhana na mawazo muhimu, ni wakati wa kuweka ujuzi wako kwa mtihani. Sehemu hii inatoa mazoezi mbalimbali maswali yaliyoundwa ili kuimarisha uelewaji wako na kukusaidia kupima ufahamu wako wa nyenzo.
Utakutana na mchanganyiko wa aina mbalimbali za maswali, ikiwemo maswali ya kuchagua jibu sahihi, maswali ya majibu mafupi, na maswali ya insha. Kila swali limebuniwa kwa umakini ili kupima vipengele tofauti vya maarifa yako na ujuzi wa kufikiri kwa makini.
Tumia sehemu hii ya tathmini kama fursa ya kuimarisha uelewa wako wa mada na kubaini maeneo yoyote ambapo unaweza kuhitaji kusoma zaidi. Usikatishwe tamaa na changamoto zozote utakazokutana nazo; badala yake, zitazame kama fursa za kukua na kuboresha.
- What is the main purpose of a protective finish on mild steel? A. To make the steel heavier B. To form a barrier that keeps oxygen and moisture from the metal so it does not rust C. To soften the metal for bending D. To make the steel conduct electricity Answer: B
- Which material is described as self-finishing? A. Mild steel B. Natural softwood C. Acrylic (PMMA) D. Cast iron Answer: C
- Why must a surface be properly prepared before a finish is applied? A. Preparation is only needed for metals B. A finish over a dirty or greasy surface will not key and is likely to peel or look patchy C. Preparation makes the finish unnecessary D. It changes the colour of the finish Answer: B
- Which finish protects steel sacrificially, still working even if the coating is scratched? A. Clear lacquer B. Wood stain C. Zinc plating (galvanising) D. Danish oil Answer: C
- Which finish would best suit outdoor timber that needs to resist rot and weather? A. Sanding sealer only B. A preservative plus an exterior varnish or oil C. Polishing D. No finish, as wood is self-finishing Answer: B
Inapatikana kwenye programu ya Green Bridge
Pakua programu ya Green Bridge CBT kwenye simu yako au kompyuta yako ili kupata maelezo kamili ya masomo, maswali ya mazoezi, na mengi zaidi.
Inapatikana kwenye programu ya Green Bridge
Pakua programu ya Green Bridge CBT kwenye simu yako au kompyuta yako ili kupata maelezo kamili ya masomo, maswali ya mazoezi, na mengi zaidi.
Vitabu Vinavyopendekezwa
Fanya Mazoezi ya Maswali ya Majaribio
Ungependa kufanya mazoezi ya maswali ya majaribio kuhusu Finishing? Pakua programu ya Green Bridge CBT ili kupata maswali ya majaribio na tathmini kamili za mazoezi kuhusu mada hii.
Pakua Programu Kwenye Google Playstore
Kila kitu unachohitaji ili kufaulu katika JAMB, WAEC & NECO.
