Design & Technology: Product Design - 9252 OxfordAQA

Systems Approach To Designing

Muhtasari

A hotel corridor light that comes on when you walk into it is doing three things, in order. Something notices you. Something decides whether to switch on, which depends on whether it is dark and on how long ago it last saw anybody. And something puts the light on and then, after a while, off again. Those three things are the whole of this topic, and they have names: input, process and output.

A systems approach lets you design a product without knowing how every part works inside. You specify what goes into a block and what must come out, and you can then buy that block, or design it later, or swap it for a better one without redesigning anything else. In this lesson you will learn the use of light sensors, temperature sensors, pressure sensors and switches as inputs; the use of programmable devices, meaning microcontrollers, as counters, timers and for decision making; and the use of buzzers, speakers and lamps as outputs. You will size a resistor for a lamp using Ohm's law, work out a sensor threshold, and decide when a system is the right answer and when it is an expensive way to avoid a spring. This is core technical principles content, examined in Section A of Paper 1, and it supplied question 2 of the specimen paper.

Malengo

  1. Inputs
  2. The use of light sensors, temperature sensors, pressure sensors and switches.
  3. Processes
  4. The use of programmable devices, (microcontrollers) as counters, timers and for decision making to provide functionality to products.
  5. Outputs
  6. The use of buzzers, speakers and lamps to provide functionality to products and processes.

Ramani ya mawazo

Mada hii imechorwa ili uone jinsi mawazo yanavyounganika.

Fungua ramani ya mawazo kwenye programu

Maelezo ya Somo

A system is a set of parts that work together to do a job, described by what it does rather than by how it is built. The systems approach draws any product as a chain of blocks, and at this level the chain is almost always three blocks long.

Dokezo Kamili la Somo Linapatikana kwenye Programu ya Green Bridge

Pata programu ya Green Bridge CBT kwenye simu au kompyuta yako kwa maktaba kamili ya IGCSE: mitihani ya miaka iliyopita, miongozo ya usahihishaji, ramani za mawazo, kadi za marudio na masomo ya sauti.

Maelezo kamili ya masomo yenye michoro
Msaidizi wa kujifunza wa AI
Mitihani ya majaribio yenye muda, husahihishwa mara umalizapo
Inapatikana kwa Android, Windows, macOS, na Linux Programu ya iOS inakuja hivi karibuni

Tathmini ya Somo

Hongera kwa kukamilisha somo la Systems Approach To Designing. Sasa kwa kuwa umechunguza dhana na mawazo muhimu, ni wakati wa kuweka ujuzi wako kwa mtihani. Sehemu hii inatoa mazoezi mbalimbali maswali yaliyoundwa ili kuimarisha uelewaji wako na kukusaidia kupima ufahamu wako wa nyenzo.

Utakutana na mchanganyiko wa aina mbalimbali za maswali, ikiwemo maswali ya kuchagua jibu sahihi, maswali ya majibu mafupi, na maswali ya insha. Kila swali limebuniwa kwa umakini ili kupima vipengele tofauti vya maarifa yako na ujuzi wa kufikiri kwa makini.

Tumia sehemu hii ya tathmini kama fursa ya kuimarisha uelewa wako wa mada na kubaini maeneo yoyote ambapo unaweza kuhitaji kusoma zaidi. Usikatishwe tamaa na changamoto zozote utakazokutana nazo; badala yake, zitazame kama fursa za kukua na kuboresha.

  1. Which one of the following is an input component in an electronic system? A. A buzzer B. A lamp C. A light dependent resistor D. A loudspeaker Answer: C
  2. The resistance of a light dependent resistor A. falls as the light falling on it increases. B. rises as the light falling on it increases. C. does not change with light. D. depends only on temperature. Answer: A
  3. A programmable device is used to make a corridor lamp stay on for two minutes after somebody passes. This uses the device as a A. counter. B. sensor. C. timer. D. transducer. Answer: C
  4. A light emitting diode with a forward voltage of 2 volts is to run at 20 milliamps from a 6 volt supply. What series resistor is needed? A. 100 ohms B. 200 ohms C. 300 ohms D. 400 ohms Answer: B
  5. Which output would be most suitable for giving spoken instructions in a public information machine? A. A buzzer B. A light emitting diode C. A filament lamp D. A speaker Answer: D

Fanyia kazi maswali haya kwenye programu

Fanyia kazi maswali haya kwenye programu

Fanya Mazoezi ya Maswali ya Majaribio

Ungependa kufanya mazoezi ya maswali ya majaribio kuhusu Systems Approach To Designing? Pakua programu ya Green Bridge CBT ili kupata maswali ya majaribio na tathmini kamili za mazoezi kuhusu mada hii.

Pakua Programu Kwenye Google Playstore

Kila kitu unachohitaji ili kufaulu katika JAMB, WAEC & NECO.

Green Bridge CBT Mobile App
Msaidizi wa Gumzo wa Kujifunza wa AI Uliobinafsishwa
Maswali ya mtihani zaidi ya 200,000 ya IGCSE, JAMB, WAEC na NECO
Zaidi ya Madaftari ya Masomo 1200
Msaada Nje ya Mtandao - Jifunze Wakati Wowote, Popote Pale
Ratiba ya Daraja la Kijani
Muhtasari wa Fasihi na Maswali Yanayoweza Kutokea
Fuata Utendaji na Maendeleo Yako
Maelezo ya Kina kwa Kujifunza kwa Kina