JAMB UTME - Chemistry - 2022

Maelezo ya Majibu

We can use the ideal gas law to solve this problem, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature in kelvin. If the volume and pressure are both increased by a factor of 4, then the new volume V' and new pressure P' are given by: V' = 4V P' = 4P Substituting these values into the ideal gas law, we get: (4P)(4V) = nR(T') Simplifying this equation, we get: 16PV = nRT' Dividing both sides by PV, we get: 16 = nRT' / PV Since n, R, and P are constant, we can simplify this to: 16 = T' / T Solving for T', we get: T' = 16T Therefore, the new temperature is 16 times the original temperature. Substituting T = 298 K, we get: T' = 16 x 298 K = 4768 K So the correct answer is 4768.0K.

Maelezo ya Majibu

The liquid is most likely to be option number 4: CH3OHCHOH2OH, which is also known as glycerol or glycerin. Glycerol has a high boiling point of 290°C, which is much higher than the boiling points of the other options. It is also a viscous liquid, which means it is thick and sticky. Glycerol is non-toxic, and it is often used in food, pharmaceuticals, and cosmetics. Furthermore, glycerol is miscible with water, which means that it can be easily mixed with water to form a homogeneous solution. It is also hygroscopic, which means that it can absorb water from the air. These properties make glycerol a useful substance in many applications, such as as a moisturizer in skincare products or as a humectant in food processing.

Maelezo ya Majibu

Maelezo ya Majibu

In the above reaction, zinc (Zn) reacts with hydrochloric acid (HCl) to form zinc chloride (ZnCl2) and hydrogen gas (H2). The chemical equation for the reaction is: Zn + 2HCl → ZnCl2 + H2 During the reaction, zinc atoms lose two electrons each and get oxidized to form positively charged zinc ions (Zn2+), as they react with the hydrogen ions (H+) from the hydrochloric acid to form zinc chloride. The hydrogen ions, on the other hand, gain an electron each and get reduced to form hydrogen gas molecules (H2). Therefore, in the given reaction, zinc is getting oxidized, as it loses electrons and forms a positively charged ion. Hence, the correct option is "oxidized."

Maelezo ya Majibu

Among the given options, only CuS will precipitate in dilute HCl. CuS is insoluble in dilute HCl, and hence it will precipitate when added to dilute HCl. However, the other options will dissolve in dilute HCl, and hence they will not precipitate. ZnS will dissolve in dilute HCl to form ZnCl2 and H2S. Na2S will react with dilute HCl to produce H2S and NaCl. FeS will dissolve in dilute HCl to form FeCl2 and H2S. Therefore, the correct answer is (4) CuS.

Maelezo ya Majibu

The reason why calcium forms complexes with ammonia is that it has empty d-orbitals.

Maelezo ya Majibu

Heavy water (D2O) is used as a moderator to control nuclear fission. A moderator is a substance that is used to slow down the neutrons produced in a nuclear reaction, making them more likely to be captured by the fuel nuclei and causing further fission. Heavy water is a type of water that contains a larger amount of the isotope deuterium (D) than regular water. Deuterium has an extra neutron compared to the more common hydrogen isotope, and this makes heavy water more effective at slowing down neutrons than regular water. Lead, iron, and chromium are not typically used as moderators in nuclear reactors. Lead can be used as a shield to absorb radiation, while iron and chromium are used in the construction of the reactor vessel and other components.

Maelezo ya Majibu

Given:

• Initial pressure, 𝑃1=10P1​=10 atmospheres
• Initial volume, 𝑉1=30 cm3V1​=30cm3
• Final volume, 𝑉2=20 dm3V2​=20dm3

First, convert all volumes to the same units. Since 1 dm3dm3 is 1000 cm3cm3:

𝑉2=20 dm3=20×1000 cm3=20000 cm3V2​=20dm3=20×1000cm3=20000cm3

Now, using Boyle's Law:

𝑃1𝑉1=𝑃2𝑉2P1​V1​=P2​V2​

Substitute the known values into the equation:

10×30=𝑃2×2000010×30=P2​×20000

300=𝑃2×20000300=P2​×20000

Solve for 𝑃2P2​:

𝑃2=30020000P2​=20000300​

𝑃2=0.015 atmospheresP2​=0.015atmospheres

Therefore, the new pressure if the temperature is kept constant is:

Maelezo ya Majibu

To determine the oxidation number of oxygen in BaO2, we can use the fact that the overall charge of a compound must be zero. Barium (Ba) is a Group 2 element and has an oxidation state of +2. The compound BaO2 has no net charge, so the sum of the oxidation states of all the atoms must be zero. Let x be the oxidation state of oxygen in BaO2. Therefore, we have: (+2) + 2(x) = 0 Solving for x, we get: x = -1 Therefore, the oxidation number of oxygen in BaO2 is -1.

Maelezo ya Majibu

Maelezo ya Majibu

The organic compound that liberates carbon(iv)oxide from trioxocarbonate(iv) solution is CH3COOH (acetic acid). When acetic acid is added to a solution of trioxocarbonate(iv) (carbonate) it reacts to form carbon(iv)oxide gas, water and a salt. The balanced chemical equation for the reaction is: 2CH3COOH + Na2CO3 → CO2 + 2H2O + 2NaCH3COO The carbon(iv)oxide gas is released as bubbles, causing the solution to fizz. Therefore, CH3COOH is the organic compound that liberates carbon(iv)oxide from trioxocarbonate(iv) solution.

Maelezo ya Majibu

Maelezo ya Majibu

Maelezo ya Majibu

The IUPAC nomenclature of the structure is "2-chloro-2-methylbutane". The name is derived by first identifying the longest carbon chain, which in this case contains four carbon atoms (butane). The carbon chain is numbered from one end to the other, giving the substituents the lowest possible numbers. Starting from either end, we can see that the first carbon atom has a chlorine atom attached to it, which is represented by the prefix "chloro-". Moving along the chain, the second carbon atom has a methyl group attached to it, which is represented by the prefix "methyl-". Since the substituents are in the second position from each other, we use the prefix "di-" to indicate two substituents in this position. Finally, we use the suffix "-ane" to indicate that the molecule is an alkane. Therefore, the correct name for this molecule is "2-chloro-2-methylbutane".

Maelezo ya Majibu

Maelezo ya Majibu

The sub-atomic particles located in the nucleus of an atom are neutron and proton. The nucleus is the dense core of an atom that contains most of its mass. Protons are positively charged particles found in the nucleus, and they determine the atomic number of the element. Neutrons are neutral particles found in the nucleus, and they help stabilize the nucleus by balancing the repulsive forces between the positively charged protons. Electrons, on the other hand, are negatively charged particles that are located outside the nucleus in energy levels or shells. They are attracted to the positively charged nucleus by electrostatic forces and are involved in chemical bonding between atoms. The number of protons in the nucleus determines the identity of the element, while the number of neutrons determines its isotopes. Isotopes of an element have the same number of protons but different numbers of neutrons in the nucleus. In summary, the two sub-atomic particles located in the nucleus of an atom are neutron and proton.

Maelezo ya Majibu

The function of sulphur during the vulcanization of rubber is to form chains which bind rubber molecules together.

Maelezo ya Majibu

The degree of disorder of the system increases as boiling water changes to steam. When water is boiled and changes to steam, the water molecules gain energy and become more disordered, which means that the molecules move more rapidly and the entropy of the system increases. The temperature of the system also increases during this process, but the degree of disorder is the factor that specifically increases as the water changes to steam. The number of molecules and activation energy remain constant during this phase transition.

Maelezo ya Majibu

The addition of sodium chloride to water to form a solution would lead to a decrease in freezing point and an increase in boiling point. This effect is known as colligative properties, which depend on the concentration of solute particles in a solution. When sodium chloride dissolves in water, it breaks down into sodium ions and chloride ions. These ions occupy space between water molecules and interfere with the formation of ice crystals during freezing. As a result, the freezing point of the solution is lowered below that of pure water. This is why we use salt to de-ice roads and sidewalks during the winter season. Similarly, the presence of solute particles in a solution also raises the boiling point of the solution. The increased concentration of solute particles in the solution causes a decrease in the vapor pressure of the solvent (water), making it harder for the solvent molecules to escape into the gas phase. This means that more energy is required to bring the solution to its boiling point compared to pure water. In summary, the addition of sodium chloride to water forms a solution with lower freezing point and higher boiling point compared to pure water.

Maelezo ya Majibu

The IUPAC name for CICH2-CH2-CH2-OH is 3-chloropropan-1-ol. To name the compound using the IUPAC nomenclature system, we start by identifying the longest continuous chain of carbon atoms that contains the functional group (-OH). In this case, the longest chain contains three carbon atoms, so the root name is propane. Next, we identify the position of the substituent (-Cl) on the chain. The substituent is attached to the third carbon atom in the chain, so the name of the compound becomes 3-chloropropane. Finally, we add the suffix -ol to indicate that the compound contains an alcohol functional group (-OH), so the complete name of the compound is 3-chloropropan-1-ol. Therefore, the correct answer is 3-chloropropan-1-ol.

Maelezo ya Majibu

Copper (II) tetraoxosulphate (IV), also known as copper sulfate or CuSO4, is widely used as a fungicide and a disinfectant. As a fungicide, copper sulfate is effective in controlling fungal diseases in plants, including mildew, leaf spots, and blights. It is also used as a fungicide in swimming pools to prevent the growth of algae. As a disinfectant, copper sulfate is effective in killing bacteria and viruses. It is used in a variety of applications, including in the production of animal feed, as a preservative for wood, and in water treatment to kill bacteria and algae. While copper sulfate has been used as a fertilizer in the past, its use in this capacity has largely been replaced by other compounds. It is not commonly used as a purifier.

Maelezo ya Majibu

Maelezo ya Majibu

The most suitable catalyst for the given reaction is vanadium(V)oxide (V2O5). Vanadium(V)oxide is a commonly used catalyst for the oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3). The reaction is an exothermic reaction, and it occurs at high temperatures (around 450-500°C) in the presence of a catalyst. V2O5 is an effective catalyst for this reaction because it has a high surface area and can provide active sites for the reaction to occur. The vanadium ions in the V2O5 catalyst undergo redox reactions with the sulfur dioxide and oxygen molecules, which promotes the formation of sulfur trioxide. Chromium(VI)oxide and iron(III)oxide are not suitable catalysts for this reaction because they are not effective at promoting the oxidation of sulfur dioxide to sulfur trioxide. Copper(I)oxide can be used as a catalyst for the reaction, but it is not as effective as vanadium(V)oxide.

Maelezo ya Majibu

Maelezo ya Majibu

The electrochemical series is a list of metals and ions arranged in order of their decreasing tendency to lose or gain electrons, and thus, their ability to act as reducing or oxidizing agents. The higher the position of a metal or ion in the electrochemical series, the greater its tendency to lose electrons and undergo oxidation, while the lower its position, the greater its tendency to gain electrons and undergo reduction. In an electrolytic cell, the cathode is the electrode where reduction occurs, meaning that cations (positively charged ions) are attracted and gain electrons to form neutral atoms or molecules. Based on the electrochemical series, the ion with the higher position in the series will have a greater tendency to gain electrons and be discharged at the cathode, while the ion with the lower position will have a lower tendency and may not be discharged at all. Among the given options, the electrochemical series order is: Cu2+ > Sn2+ > Fe2+ > Zn2+ Therefore, Cu2+ has the highest tendency to be discharged at the cathode and undergo reduction, while Zn2+ has the lowest tendency. So, in an electrolytic cell, Cu2+ will be discharged at the cathode, while Zn2+ may not be discharged at all, depending on the conditions of the cell.

Maelezo ya Majibu

Maelezo ya Majibu

Maelezo ya Majibu

Maelezo ya Majibu

Maelezo ya Majibu

Maelezo ya Majibu

The active component of baking powder is sodium bicarbonate (NaHCO3). It is responsible for the leavening or rising of baked goods by releasing carbon dioxide gas when it reacts with an acid. Other ingredients in baking powder, such as monocalcium phosphate and sodium aluminum sulfate, provide the acid component for the reaction to occur. Magnesium sulfate (MgSO4) and calcium sulfate (CaSO4) are not typically used in baking powder, and sodium chloride (NaCl) is simply table salt and not an active ingredient in leavening.

Maelezo ya Majibu

The statement that is TRUE of the complete hydrolysis of a glyceride by sodium hydroxide is: - 3 moles of NaOH are required for each mole of glyceride. During the hydrolysis of a glyceride (a triglyceride), the ester bonds between the fatty acid chains and glycerol are broken by the action of a strong base like sodium hydroxide. This results in the formation of glycerol and the corresponding salts of fatty acids, which are commonly known as "soaps." The reaction can be represented by the following equation: Triglyceride + 3 NaOH → 3 soap + glycerol As per the equation, 3 moles of NaOH are required to hydrolyze one mole of glyceride, and 3 moles of soap and one mole of glycerol are produced. The use of concentrated sulfuric acid (H2SO4) is not essential for the completion of the reaction, but it can be used as a catalyst to speed up the reaction.

Maelezo ya Majibu

Out of the given options, K2CO3 is stable to heat.

Maelezo ya Majibu

Chlorine is not a common bleaching agent for wet litmus paper, wet pawpaw leaf, and most wet fabric dyes. It is commonly used as a bleaching agent for printer's ink.

Maelezo ya Majibu

The role that sodium chloride (NaCl) plays in soap preparation is to separate soap from glycerol. When fats or oils are hydrolyzed with an alkali, such as sodium hydroxide (NaOH), the result is a mixture of soap and glycerol. Adding NaCl to this mixture helps to induce the precipitation of the soap, allowing it to be separated from the glycerol. This process is known as "salting out" and is used to purify the soap and remove impurities. Sodium chloride does not react with glycerol or accelerate the decomposition of fat and oil. Also, it does not convert the fatty acid to its sodium salt as this conversion is done by the alkali (such as NaOH) during the saponification process.

Maelezo ya Majibu

The process of converting crude petroleum into useful products is known as fractional distillation. Crude petroleum is a mixture of different hydrocarbons, and fractional distillation separates these hydrocarbons based on their boiling points. During the process of fractional distillation, crude petroleum is heated to a high temperature, and the resulting vapors are passed through a tower called a fractionating column. This column contains a series of trays, and each tray contains a specific temperature range. As the vapors rise up the column, they cool and condense into liquids on the tray with a temperature that matches their boiling point. The liquids are then collected and further refined into useful products like gasoline, diesel, jet fuel, and heating oil. Fractional distillation is an important process because it allows us to separate and purify the different components of crude petroleum, which have different properties and uses. For example, gasoline has a lower boiling point and is more volatile than diesel fuel, which makes it ideal for use in cars. By separating these components, we can create products that meet specific needs and requirements.

Maelezo ya Majibu

The highest equilibrium yield of N2O4 would be produced at low temperature and low pressure. In a chemical reaction, the position of the equilibrium can be influenced by changing the temperature or pressure. A decrease in temperature or an increase in pressure favors the side of the reaction with the fewer moles of gas (in this case, N2O4). This means that, if the temperature is low and the pressure is low, there will be more N2O4 at equilibrium, as the reaction will shift to the right to counteract the reduction in the concentration of N2O4. So, low temperature and low pressure would produce the highest equilibrium yield of N2O4.

Maelezo ya Majibu

The compound that is NOT correctly formed when the parent metal is heated in air is: tri-iron tetraoxide (Fe2O). This is because the correct compound formed from the heating of iron in air is iron (III) oxide or Fe2O3. The formula for tri-iron tetraoxide is incorrect, as it implies that there are only three iron atoms in the compound when there should be four.

Maelezo ya Majibu

The addition of charcoal to the filter bed of sand during water treatment for township supply is to remove odors and improve the taste of the water. Charcoal is a porous material that can adsorb impurities and chemicals from the water, such as dissolved organic matter that can contribute to unpleasant tastes and odors. This process helps to produce a better-quality drinking water that is free from unpleasant tastes and odors. It should be noted that while the addition of charcoal can help remove impurities, it does not kill germs or prevent tooth decay or goiter. Other water treatment methods, such as disinfection with chlorine or ultraviolet light, are required to kill harmful microorganisms and ensure the safety of the drinking water.

Maelezo ya Majibu

When air is passed through alkaline pyrogallol, the oxygen in the air is absorbed by the pyrogallol, resulting in an increase in the weight of the pyrogallol. The other gases in air, namely nitrogen, neon, and argon, do not react with pyrogallol under these conditions. Therefore, the answer is oxygen.