WAEC SSCE - Physics - 2018 (Essay)

Detalhes da Resposta

Maximum height for maximum range

A projectile attains its maximum range when it is launched at an angle of \(45^{\circ}\) to the horizontal.

Maximum height: \(H = \dfrac{u^{2}\sin^{2}\theta}{2g}\), with \(u = 200\ \text{m s}^{-1}\), \(\theta = 45^{\circ}\), \(g = 10\ \text{m s}^{-2}\).

\(\sin 45^{\circ} = \dfrac{1}{\sqrt{2}}\), so \(\sin^{2}45^{\circ} = 0.5\).

\(H = \dfrac{200^{2}\times 0.5}{2\times 10} = \dfrac{40000\times 0.5}{20} = \dfrac{20000}{20} = 1000\ \text{m}\).

The maximum height attained is 1000 m.

Detalhes da Resposta

Materials used for making optical fibres

• Silica (fused quartz / glass).
• Plastic (transparent polymer, e.g. acrylic/PMMA).
• Doped glass such as germanium-doped or fluoride glass used for the core and cladding.

Detalhes da Resposta

Wien's displacement law

Given \(\lambda_{\max}T = 2.9\times10^{-3}\ \text{m K}\), and \(T = 57^{\circ}\text{C} = 57 + 273 = 330\ \text{K}\).

\(\lambda_{\max} = \dfrac{2.9\times10^{-3}}{330} = 8.79\times10^{-6}\ \text{m}\).

Frequency: \(f = \dfrac{c}{\lambda_{\max}} = \dfrac{3.0\times10^{8}}{8.79\times10^{-6}}\).

\(f = 3.41\times10^{13}\ \text{Hz}\).

The frequency of the radiated energy is \(3.4\times10^{13}\ \text{Hz}\).

Detalhes da Resposta

(a) Intrinsic semiconductor

An intrinsic semiconductor is a pure semiconductor (such as pure silicon or germanium) with no added impurity, in which the number of free electrons equals the number of holes, both being produced only by thermal breaking of covalent bonds.

(b) p-type versus n-type semiconductors

p-type	n-type
Formed by doping with a trivalent impurity (e.g. boron, aluminium).	Formed by doping with a pentavalent impurity (e.g. phosphorus, arsenic).
Majority charge carriers are holes (positive).	Majority charge carriers are free electrons (negative).
The impurity is called an acceptor.	The impurity is called a donor.

Detalhes da Resposta

Three classes of magnetic materials

• Ferromagnetic materials (e.g. iron, nickel, cobalt) which are strongly attracted by a magnet.
• Paramagnetic materials (e.g. aluminium, platinum) which are weakly attracted by a magnet.
• Diamagnetic materials (e.g. copper, bismuth) which are weakly repelled by a magnet.

Detalhes da Resposta

(a)

Strain is a measure of the deformation or elongation of a material when subjected to an external force or stress. It is defined as the ratio of the change in length or shape of an object to its original length or shape.

(b)

In this case, the rubber band has been stretched to twice its original length. Therefore, the change in length is equal to twice the original length (2L), where L is the original length.

To calculate the strain, we use the formula:

Strain = (Change in length) / (Original length)

Substituting the values, we get:

Strain = (2L - L) / L = L / L = 1

So, the strain on the rubber band is 1, which means that the rubber band has elongated by 100% of its original length. This is because the change in length is equal to the original length, so the strain is equal to 1 (or 100%).

Detalhes da Resposta

(a) LASER stands for Light Amplification by Stimulated Emission of Radiation.

(b) A laser is a device that produces an intense, narrow, highly directional beam of light that is monochromatic (single wavelength) and coherent (the waves are in phase), by the process of stimulated emission of radiation.

Detalhes da Resposta

(a) Factors affecting heat loss

(i) By radiation:

• The temperature of the body (and of its surroundings).
• The nature and colour of the surface (dull/black surfaces radiate more than shiny/white ones) and its surface area.

(ii) By convection:

• The temperature difference between the body and the surrounding fluid.
• The exposed surface area and the freedom of the fluid to circulate (draught/movement of the fluid).

(b) Factors determining the quantity of heat in a body

• The mass of the body.
• The temperature (and the nature/specific heat capacity of the material).

(c) The statement "the specific latent heat of vaporization of mercury is \(2.72\times10^{5}\ \text{J kg}^{-1}\)" means that \(2.72\times10^{5}\) joules of heat is required to change 1 kilogram of mercury from liquid to vapour at its boiling point without any change in temperature.

(d) The jug of water

Power of heater: \(P = \dfrac{V^{2}}{R} = \dfrac{220^{2}}{35} = \dfrac{48400}{35} = 1382.9\ \text{W}\).

(i) Mass of water before heating. In the first \(t_{1} = 4\text{ min} = 240\text{ s}\) the temperature rises from \(28^{\circ}\text{C}\) to \(100^{\circ}\text{C}\), so \(\Delta\theta = 72\ \text{K}\).

Heat supplied \(= P t_{1} = 1382.9\times240 = 3.319\times10^{5}\ \text{J}\).

Taking heat capacity of jug \(C = 250\ \text{J K}^{-1}\) and \(c_{water} = 4200\ \text{J kg}^{-1}\text{K}^{-1}\):

\((m c_{water} + C)\Delta\theta = P t_{1}\)

\((4200m + 250)\times 72 = 331886\)

\(4200m + 250 = 4609.5 \Rightarrow 4200m = 4359.5 \Rightarrow m = 1.04\ \text{kg}\).

The mass of water before heating is about 1.04 kg.

(ii) Specific latent heat of vaporization of steam. In the next \(t_{2} = 5\text{ min} = 300\text{ s}\) the water boils at constant temperature and \(0.3\ \text{kg}\) evaporates.

Heat supplied \(= P t_{2} = 1382.9\times300 = 4.149\times10^{5}\ \text{J}\).

\(L = \dfrac{P t_{2}}{m_{evap}} = \dfrac{414857}{0.3} = 1.38\times10^{6}\ \text{J kg}^{-1}\).

Detalhes da Resposta

(a) Diffraction

Diffraction is the spreading of a wave into the region behind an obstacle, or the bending of a wave round the edges of an obstacle or through an aperture, as the wave passes them. It is most noticeable when the width of the aperture or obstacle is comparable with the wavelength of the wave.

(b)(i) Critical angle

The critical angle is the angle of incidence in the optically denser medium for which the angle of refraction in the less dense medium is exactly \(90^\circ\). For any angle of incidence greater than the critical angle the light undergoes total internal reflection.

(\(\alpha\)) Value of the critical angle

From the diagram the ray travels along (grazes) the top surface of the block, so its angle of incidence in air is \(90^\circ\). It is refracted into the block, and the refracted ray makes \(44^\circ\) with the surface. Its angle measured from the normal is therefore

\[ r = 90^\circ - 44^\circ = 46^\circ. \]

At grazing incidence the angle of refraction is equal to the critical angle of the block, hence

\[ c = 46^\circ. \]

(\(\beta\)) Refractive index of the block

\[ n = \frac{1}{\sin c} = \frac{1}{\sin 46^\circ} = \frac{1}{0.7193} = 1.39. \]

(c) Pipes

A pipe closed at one end sounds only the odd harmonics. Its fundamental is \(f_c = 200\,\text{Hz}\), so its first overtone is the third harmonic:

\[ 3 \times 200 = 600\,\text{Hz}. \]

(i) Fundamental frequency of the open pipe

An open pipe sounds all harmonics, so its first overtone is the second harmonic, \(2f_o\). Given that the two first overtones are equal:

\[ 2f_o = 600 \Rightarrow f_o = 300\,\text{Hz}. \]

(ii) Length of the closed pipe

For a closed pipe \(f_c = \dfrac{v}{4L_c}\), so

\[ L_c = \frac{v}{4f_c} = \frac{330}{4 \times 200} = 0.41\,\text{m}. \]

(iii) Length of the open pipe

For an open pipe \(f_o = \dfrac{v}{2L_o}\), so

\[ L_o = \frac{v}{2f_o} = \frac{330}{2 \times 300} = 0.55\,\text{m}. \]

Detalhes da Resposta

(a) Definitions

• Reactance is the opposition offered to the flow of alternating current by an inductor or a capacitor, arising from the induced back-e.m.f (inductor) or stored charge (capacitor). It is measured in ohms and, unlike resistance, does not dissipate energy.
• Impedance is the total opposition to the flow of alternating current in a circuit, being the combined effect of resistance and reactance. It is measured in ohms, \(Z=\sqrt{R^2+X^2}\).

(b) The a.c. generator (shown with the coil between the N and S poles, the slip rings and the load)

1. Why an e.m.f. is induced: As the coil rotates in the magnetic field between the N and S poles, the magnetic flux linking the coil changes continuously. By Faraday's law, a changing flux linkage induces an e.m.f. in the coil; the e.m.f. is greatest when the coil moves parallel to the field (cutting flux fastest) and zero when it moves perpendicular to it.
2. Purpose of the slip-rings: They provide a continuous sliding electrical contact between the ends of the rotating coil and the external circuit (through the brushes), so that the induced alternating e.m.f. is delivered to the load without the connecting wires twisting.
3. Law for the direction of the induced current: Fleming's right-hand (dynamo) rule. Holding the thumb, first finger and second finger of the right hand mutually at right angles, the First finger points along the Field (N to S), the Thumb along the Thrust (motion of the conductor), and the seCond finger then gives the direction of the induced Current.
4. Two ways to increase the induced e.m.f.: increase the number of turns on the coil; rotate the coil faster (higher speed of rotation). (Others: use a stronger magnet, or a larger coil area / soft-iron core.)

(c) Energy transformed by a 12 V, 6 W lamp in 5 minutes

Power \(P=6\text{ W}\); time \(t=5\times60=300\text{ s}\).

\[E=Pt=6\times300=1800\text{ J}.\]

The lamp transforms 1800 J of electrical energy in 5 minutes.

Detalhes da Resposta

(a) Uniform acceleration. Uniform acceleration is a constant rate of change of velocity with time, that is, the velocity of the body changes by equal amounts in equal intervals of time.

(b) Forces acting on a moving car.

(i) Horizontal forces and their directions:

• The driving (tractive) force from the engine through the wheels, acting forward in the direction of motion.
• Friction between the tyres and road together with air resistance (drag), acting backward, opposite to the direction of motion.

(ii) Vertical forces and their directions:

• The weight of the car, acting vertically downward.
• The normal reaction from the road surface, acting vertically upward.

(c)(i) Velocity-time graph. The car speeds up uniformly from rest to \(25\text{ m s}^{-1}\) in the first \(20\text{ s}\) (line \(OA\)), holds \(25\text{ m s}^{-1}\) for the next \(30\text{ s}\), that is until \(t=50\text{ s}\) (line \(AB\)), then slows uniformly to rest by \(t=60\text{ s}\) (line \(BC\)).

(c)(ii)(\(\alpha\)) Total distance travelled. The distance is the area under the graph, which is the trapezium \(OABC\). The parallel sides are the whole base \(OC=60\text{ s}\) and the top \(AB=30\text{ s}\); the height is the speed \(25\text{ m s}^{-1}\):

\[ s=\tfrac{1}{2}(OC+AB)\times v=\tfrac{1}{2}(60+30)\times 25=\tfrac{1}{2}\times 90\times 25=1125\text{ m.} \]

(c)(ii)(\(\beta\)) Deceleration. The deceleration is the magnitude of the slope of the final line \(BC\), where the speed falls from \(25\text{ m s}^{-1}\) to \(0\) in the last \(10\text{ s}\) (from \(t=50\text{ s}\) to \(t=60\text{ s}\)):

\[ a=\frac{\text{change in velocity}}{\text{time}}=\frac{0-25}{60-50}=\frac{-25}{10}=-2.5\text{ m s}^{-2}. \]

So the car decelerates at \(2.5\text{ m s}^{-2}\). Note the value is \(2.5\text{ m s}^{-2}\), not \(25\text{ m s}^{-2}\): the change of \(25\text{ m s}^{-1}\) is divided by the \(10\text{ s}\) taken.

Work done on the spring (force-extension graph). For a spring obeying Hooke's law the work done, which is the elastic potential energy stored, equals the area under the force-extension line. From the graph the line runs from the origin to \(F=12\text{ N}\) at an extension \(e=0.5\text{ cm}=0.5\times10^{-2}\text{ m}=0.005\text{ m}\), so the area is a triangle:

\[ W=\tfrac{1}{2}\,F\,e=\tfrac{1}{2}\times 12\times 0.005=0.03\text{ J.} \]

The work done on the spring is \(0.03\text{ J}\), that is \(3.0\times10^{-2}\text{ J}\). Remember to convert the extension from centimetres to metres before multiplying, otherwise the energy comes out one hundred times too large.

Detalhes da Resposta

(a) Binding energy

The binding energy of a nucleus is the energy required to completely separate the nucleus into its individual constituent protons and neutrons (equivalently, the energy released when the separate nucleons combine to form the nucleus). It equals the mass defect times \(c^{2}\).

(b) Three evidences that X-rays are electromagnetic waves

• They travel in straight lines with the speed of light and are undeflected by electric or magnetic fields (so they are uncharged).
• They undergo diffraction and interference when passed through crystals.
• They can be polarised.

(c) Three peaceful uses of nuclear energy

• Generation of electricity in nuclear power stations.
• Medical uses: radiotherapy to treat cancer and use of radioisotopes as tracers in diagnosis.
• Industrial and agricultural uses: sterilisation of equipment, food preservation, and thickness/level gauging.

(d) Photoelectric calculation

Data: \(\lambda = 4.5\times10^{-7}\ \text{m}\), work function \(W_{0} = 3.0\times10^{-19}\ \text{J}\) (taking the stated value as \(3.0\times10^{-19}\ \text{J}\)), \(c = 3.0\times10^{8}\ \text{m s}^{-1}\), \(h = 6.6\times10^{-34}\ \text{J s}\).

(i) Frequency: \(f = \dfrac{c}{\lambda} = \dfrac{3.0\times10^{8}}{4.5\times10^{-7}} = 6.67\times10^{14}\ \text{Hz}\).

(ii) Energy of the incident light: \(E = hf = 6.6\times10^{-34}\times6.67\times10^{14} = 4.4\times10^{-19}\ \text{J}\).

(iii) Energy (max KE) of the photoelectrons: \(E_{k} = E - W_{0} = 4.4\times10^{-19} - 3.0\times10^{-19} = 1.4\times10^{-19}\ \text{J}\).