WAEC SSCE - Chemistry - 1992

When steam is passed over white-hot coke, the products are

Detalhes da Resposta

The following acids are monobasic except

Detalhes da Resposta

A monobasic acid is an acid that can donate only one hydrogen ion (H+) or proton per molecule in an acid-base reaction. Out of the given acids, all except ethanedioic acid (also known as oxalic acid) are monobasic. Methanoic acid, also known as formic acid, has the formula HCOOH and can donate one hydrogen ion (H+) in an acid-base reaction. Dioxonitrate III acid, also known as nitrous acid, has the formula HNO2 and can donate one hydrogen ion (H+) in an acid-base reaction. Oxochlorate (I) acid, also known as hypochlorous acid, has the formula HClO and can donate one hydrogen ion (H+) in an acid-base reaction. Hydrobromic acid has the formula HBr and can donate one hydrogen ion (H+) in an acid-base reaction. Ethanedioic acid, also known as oxalic acid, has the formula H2C2O4 and can donate two hydrogen ions (H+) in an acid-base reaction, making it a dibasic acid.

The formula (CH₃),₃ COH is that of a

Detalhes da Resposta

The given formula, (CH₃)₃COH, represents an alkanol with a hydroxyl (-OH) group attached to a carbon atom. To determine whether it is a primary, secondary, or tertiary alkanol, we need to look at the carbon atom to which the -OH group is attached and count the number of carbon atoms that are directly bonded to it. In this case, the carbon atom to which the -OH group is attached is bonded to three other carbon atoms, which means that it is a tertiary carbon. Therefore, the alkanol is a tertiary alkanol. However, the question also gives an option for trihydric alkanol, which means an alkanol with three hydroxyl (-OH) groups attached to it. The given formula has only one hydroxyl group, so it cannot be a trihydric alkanol. Therefore, the correct answer is: tertiary alkanol.

Which of the following groups contains entirely linear molecules?

Detalhes da Resposta

The group that contains entirely linear molecules is (d) CO₂ H₂ N₂. To determine if a molecule is linear, we need to examine its molecular geometry. Linear molecules have a symmetrical arrangement of atoms around a central atom, with a bond angle of 180 degrees. In group (a), H₂NH₃O₂, the molecule contains different atoms (hydrogen, nitrogen, and oxygen) that cause an asymmetrical arrangement and do not have a bond angle of 180 degrees, so it is not linear. In group (b), CO₂NH₃₂, the molecule contains a non-central nitrogen atom that disrupts the symmetry and does not have a bond angle of 180 degrees, so it is not linear. In group (c), H₂CH₄N₂, the molecule contains different atoms (hydrogen, carbon, and nitrogen) that cause an asymmetrical arrangement and do not have a bond angle of 180 degrees, so it is not linear. In group (d), CO₂H₂N₂, both molecules contain only one type of central atom (carbon and nitrogen, respectively) and no lone pairs of electrons, which allows for a symmetrical arrangement of atoms and a bond angle of 180 degrees, making them both linear. In group (e), CH₄O₂CO₂, the molecule contains different atoms (carbon, hydrogen, and oxygen) that cause an asymmetrical arrangement and do not have a bond angle of 180 degrees, so it is not linear. Therefore, the group that contains entirely linear molecules is (d) CO₂H₂N₂.

The following salts are readily soluble in water except

Detalhes da Resposta

Which of the following gases will have the highest rate of diffusion under the same conditions? (H = 1, C =12, O = 16, S = 32, CI = 35.5)

Detalhes da Resposta

''The rate a reaction is proportional to the number of effective collisions occurring per second between the reactants''. This statement is associated with the

Detalhes da Resposta

The statement "The rate a reaction is proportional to the number of effective collisions occurring per second between the reactants" is associated with Collision Theory. Collision theory explains how chemical reactions occur at the molecular level. It states that for a reaction to occur, the reacting molecules must collide with each other with sufficient energy and proper orientation. Not all collisions lead to a reaction, only those with enough energy and correct orientation can lead to a successful reaction. The rate of a reaction is determined by the frequency of these effective collisions. The more frequently the reactant molecules collide with enough energy and proper orientation, the faster the reaction rate. Therefore, the statement emphasizes that the rate of a chemical reaction is proportional to the number of successful collisions (effective collisions) occurring between the reactants per second.

The energy required to remove the most loosely bound electron from an atom in the gaseous state is known as the

Detalhes da Resposta

The energy required to remove the most loosely bound electron from an atom in the gaseous state is known as the ionization energy. This means that it takes a certain amount of energy to remove an electron from an atom, and this energy is specific to each atom. The ionization energy is the minimum amount of energy required to remove an electron from an atom and create a positively charged ion. In simple terms, you can think of an electron in an atom as being held in place by the attraction between the negatively charged electron and the positively charged nucleus of the atom. To remove the electron, you need to overcome this attraction, and that requires energy. The ionization energy is a measure of the amount of energy required to overcome this attraction and remove the electron. Ionization energy is an important concept in chemistry because it determines how easily an atom can form a positive ion, which is an atom that has lost one or more electrons. Elements with low ionization energies tend to form positive ions more readily than elements with high ionization energies.

The reactions ethyne are mainly

Detalhes da Resposta

Which of the following statements is not correct? The 4s orbital

Detalhes da Resposta

What is the value of n in the following equation? XO-₄ +8H ⁺ + ne- → X^{2 +} + 4H₂O

Detalhes da Resposta

The product of the reaction between propanoic acid and ethanol is

Detalhes da Resposta

The product of the reaction between propanoic acid and ethanol is ethylpropanoate. This is because when propanoic acid and ethanol react, they undergo an esterification reaction to form an ester called ethylpropanoate. Esters are organic compounds that are formed from the reaction between an alcohol and a carboxylic acid. In this case, ethanol acts as the alcohol, and propanoic acid acts as the carboxylic acid. The reaction involves the removal of a water molecule, resulting in the formation of the ester. The general reaction can be represented as follows: Carboxylic acid + alcohol → ester + water Propanoic acid + ethanol → ethylpropanoate + water Therefore, the correct answer is ethylpropanoate.

The maximum number of electrons that can accommodated in the shell having the principal quantum number 3 is

Detalhes da Resposta

The maximum number of electrons that can be accommodated in the shell having the principal quantum number 3 is 18. The principal quantum number (n) represents the energy level of an electron in an atom. For a given value of n, there are different subshells with different shapes and orientations. These subshells are represented by the letters s, p, d, and f. For n=3, there are three subshells: 3s, 3p, and 3d. The 3s subshell can hold a maximum of 2 electrons, the 3p subshell can hold a maximum of 6 electrons, and the 3d subshell can hold a maximum of 10 electrons. Therefore, the total number of electrons that can be accommodated in the shell having the principal quantum number 3 is the sum of the maximum number of electrons in each of these subshells: 2 + 6 + 10 = 18 Hence, the maximum number of electrons that can be accommodated in the shell having the principal quantum number 3 is 18.

When air is passed through potash and then pyrogallol, the components are noble gases,

Detalhes da Resposta

Consider the compounds represented by the following general formula: X₂SO₄ Y₂(SO₄)₃, 24H₂OX and Y could respectively be

Detalhes da Resposta

When iron rusts, it undergoes

Detalhes da Resposta

When iron rusts, it undergoes a redox reaction. This means that iron reacts with oxygen in the presence of water to form hydrated iron(III) oxide, commonly known as rust. This reaction involves the transfer of electrons from the iron to the oxygen, which causes the iron to become oxidized and the oxygen to become reduced. Rust is a reddish-brown substance that weakens and destroys iron over time, which is why it's important to prevent rust from forming on metal objects.

If a reaction is said to be exothermic, which of the following statements is a correct deduction from the information?

Detalhes da Resposta

The correct deduction from the information that a reaction is exothermic is that the reaction vessel gets hotter as the reaction proceeds. This means that energy is released during the reaction, which increases the temperature of the surroundings. The other options are incorrect because: - ∆H for the reaction is negative in an exothermic reaction, not positive. This indicates that the reaction releases heat. - The activation energy of the reaction is not related to whether it is exothermic or endothermic. It is the minimum amount of energy required for a reaction to occur. - The rate of the reaction may or may not increase with time in an exothermic reaction. The rate depends on factors such as concentration, temperature, and catalysts.

Which of the following statement is not correct about esterification?

Detalhes da Resposta

The statement that "it is similar to hydrolysis" is not correct about esterification. Esterification is a chemical reaction in which an alcohol and a carboxylic acid react to form an ester and water. It is a slow reaction that is catalyzed by acids and is reversible, meaning that the ester can be hydrolyzed back into the original alcohol and carboxylic acid under appropriate conditions. However, esterification and hydrolysis are opposite reactions. Esterification involves the condensation of an alcohol and a carboxylic acid to form an ester and water, while hydrolysis involves the breaking down of an ester into its constituent alcohol and carboxylic acid through the addition of water. Esters are often responsible for fruity or floral smells and flavors in various foods and perfumes.

The halide used widely in photography is

Detalhes da Resposta

The halide that is widely used in photography is silver bromide. Halides are compounds that contain halogen elements like bromine, chlorine, iodine, etc. In photography, halides are used to make light-sensitive materials. Silver bromide is particularly useful because it is sensitive to light and can be used to capture images. When light falls on a film or photographic paper containing silver bromide, the silver ions in the compound are reduced to form silver metal. This forms the basis of photographic development, where the image is created through a chemical reaction between the light-sensitive material and a developing agent. In summary, silver bromide is the halide used in photography because of its light sensitivity and its ability to form a visible image through a chemical reaction with a developing agent.

Which of the following pH values is likely to be that of a slightly alkaline solution?

Detalhes da Resposta

The pH scale ranges from 0 to 14, where 0 is the most acidic and 14 is the most alkaline (basic). A pH value of 7 is considered neutral, meaning that the solution is neither acidic nor alkaline. So, a slightly alkaline solution would have a pH value greater than 7. Among the given options, only two values are greater than 7: 8 and 13. A pH value of 8 is slightly alkaline, while a pH value of 13 is strongly alkaline. Therefore, the pH value that is likely to be that of a slightly alkaline solution is 8.

If the volume of a given mass of gas at 298 K and pressure of 205.2 x 10³ Nm-² is 2.12dm³, what is volume of the gas at s.t.p? (Standard pressure = 101.3 x 10³ Nm-₂, Standard temperature = 273K)

Detalhes da Resposta

Study carefully the reaction represented by the equation below. 2H₂O _2(l) → O _2(g) + 2H₂O_(l). Which of the following will not reaction increase the reaction rate?

Detalhes da Resposta

What is the following compounds will not decompose when heated strongly ?

Detalhes da Resposta

Which of the following compounds is not correct about the reaction of sodium material for the manufacture of plastics?

Detalhes da Resposta

The compound that is not correct for the reaction of sodium material in the manufacture of plastics is ethane. This is because ethane is an alkane and is not reactive enough to undergo a polymerization reaction, which is necessary for the production of plastics. On the other hand, the other compounds listed - ethyne, monochloroethene, propene, and butadiene - are all capable of undergoing polymerization reactions, which are initiated by the use of sodium material or other catalysts. These reactions involve the joining of smaller molecules, called monomers, to form long chains of polymers, which are the building blocks of plastics. In summary, ethane is not a suitable compound for the production of plastics, whereas the other compounds listed can all undergo polymerization reactions to form plastics.

Which of the following minerals contains flurine as one of its constituent elements?

Detalhes da Resposta

The mineral that contains fluorine as one of its constituent elements is cryolite. Cryolite is a rare mineral that consists of sodium, aluminum, and fluoride. It is a white or colorless mineral that is found primarily in Greenland. The unique property of cryolite is that it contains a high concentration of fluoride ions, which makes it a valuable industrial material for the production of aluminum. Fluorine is a highly reactive element and is not commonly found in nature in its pure form. However, it is commonly found as a constituent element in minerals such as cryolite. Bauxite, potash alum, kaolin, and mica are minerals that do not contain fluorine as one of their constituent elements, making cryolite the correct answer to the question.

Which of the following processes is a physical reaction?

Detalhes da Resposta

A physical reaction is a process that involves changes in the physical properties of a substance, such as shape, size, or state, without any change in its chemical composition. Among the options provided, the process that is a physical reaction is "allotropic change." Allotropic change is a physical reaction because it involves a change in the physical form of an element, but not a change in its chemical composition. Allotropy refers to the ability of an element to exist in different forms, called allotropes, which have different physical properties but the same chemical composition. For example, carbon can exist in the form of diamond, graphite, or charcoal, which all have different physical properties but are chemically identical. In contrast, the other processes listed involve chemical reactions, where there is a change in the chemical composition of the substance. Electrolysis involves the use of an electric current to break down a compound into its constituent elements or ions. Hydrolysis is the reaction of a compound with water to produce a new compound. Neutralization is the reaction between an acid and a base to produce a salt and water. Corrosion is the gradual destruction of a metal by chemical or electrochemical reaction with its environment.

Which of the following involves the decomposition enzymic action?

Detalhes da Resposta

The process that involves the decomposition enzymic action is "fermentation". Fermentation is a metabolic process that converts sugar into acids, gases or alcohol in the absence of oxygen. During fermentation, microorganisms such as bacteria or yeast use enzymes to break down the sugar molecules into simpler compounds, releasing energy in the process. This enzymatic action causes the fermentation process to occur. In contrast, esterification is a chemical reaction between an alcohol and a carboxylic acid, which does not involve enzymic action. Dehydration is a chemical process that removes water from a substance, and polymerization is a chemical reaction that combines many small molecules to form a larger molecule. Both of these processes also do not involve enzymic action. Saponification is a chemical reaction between a fat or oil and a strong base, which involves the hydrolysis of ester bonds. Although saponification may involve the action of enzymes, it is not primarily a process that involves enzymic decomposition.

What is the change in the oxidation number of phosphorus in the the reaction represented by the following equation? 4P _(s) + 5O_(2)(g) → 2P₂O_5(g)

Detalhes da Resposta

Which of the following accounts for the difference in the mode of conduction of electricity by metals and aqueous salt solutions?

Detalhes da Resposta

The difference in the mode of conduction of electricity by metals and aqueous salt solutions is due to the fact that metals have mobile electrons that can move freely and carry an electric current, while aqueous salt solutions have mobile ions (charged particles) that carry an electric current. Therefore, the correct option is: "Electricity is carried by mobile electrons in metals but by ions in aqueous salt solution." In metals, the outermost electrons of the atoms are not tightly bound to their nuclei, which allows them to move freely through the metal structure. When a voltage is applied, these mobile electrons can move in a particular direction, carrying an electric current. In contrast, aqueous salt solutions contain dissolved salts that break up into positively and negatively charged ions. When a voltage is applied, these mobile ions move towards the opposite electrode, carrying an electric current. Therefore, the mode of conduction of electricity in metals and aqueous salt solutions is fundamentally different, with metals conducting electricity via mobile electrons, and aqueous salt solutions conducting electricity via mobile ions.

A dye is suspected to have contaminated a lollipop. Which of the following is the best method by which the contaminant may be isolated?

Detalhes da Resposta

The best method to isolate a suspected dye contaminant from a lollipop is paper chromatography. Paper chromatography is a technique used to separate and identify different substances based on their physical and chemical properties. In this technique, a small amount of the sample is placed on a strip of paper and then the paper is placed in a suitable solvent. As the solvent moves up the paper, it carries the different components of the sample along with it. The different components will travel at different rates based on their solubility in the solvent and their attraction to the paper. In the case of a suspected dye contaminant in a lollipop, paper chromatography can be used to isolate and identify the dye by separating it from the other components of the lollipop. The lollipop can be dissolved in a suitable solvent, and a small amount of the resulting solution can be spotted onto a strip of paper. The paper can then be placed in a solvent that will carry the dye and other components up the paper at different rates, allowing the dye to be separated and identified. Fractional distillation, recrystallization, filtration, and evaporation are not suitable methods for isolating a dye contaminant from a lollipop. Fractional distillation is used to separate different components of a liquid mixture based on their boiling points, but it is not suitable for separating a solid dye from a lollipop. Recrystallization is a technique used to purify solid compounds, but it is not suitable for isolating a dye from a lollipop. Filtration is a method used to separate solid particles from a liquid, but it is not suitable for isolating a dye from a lollipop. Evaporation is a process used to remove a solvent from a solution, but it is not suitable for isolating a dye from a lollipop.

Methanol is obtained from wood by

Detalhes da Resposta

Methanol can be obtained from wood by a process called destructive distillation. In this process, wood is heated in the absence of air or oxygen, which causes it to break down and release volatile compounds. Methanol is one of the compounds released during this process and can be collected by condensation. This method has been used historically for producing methanol, which is also known as wood alcohol, as well as other chemicals such as charcoal, acetic acid, and tar.

What is the quantity of electricity produced when a current of 0.5A is passed for 5 hours 45 mins? (1F = 96500C)

Detalhes da Resposta

When sucrose is warmed with Fehling's solution

Detalhes da Resposta

Vulcanization of rubber

Detalhes da Resposta

Vulcanization is a chemical process that involves adding sulfur to natural rubber and heating it. This process hardens the rubber and increases its durability and strength, making it more suitable for use in various applications such as tires and shoe soles. During vulcanization, the sulfur forms cross-linkages between the long chains of rubber molecules, making them more rigid and less elastic. This results in the hardening of the rubber and makes it more resistant to abrasion and tearing. Vulcanization also helps to prevent the growth of fungus on the rubber by making it more resistant to environmental factors such as heat, humidity, and moisture. In summary, vulcanization hardens rubber through cross-linkages and increases its durability, strength, and resistance to environmental factors such as fungus growth.

If a reaction is said to be exothermic, which of the following statements is a correct deduction from the information?

Detalhes da Resposta

An exothermic reaction is a type of reaction that releases heat into the surroundings. Therefore, the correct deduction from this information is that the reaction vessel gets hotter as the reaction proceeds. This is because the heat energy released from the reaction is absorbed by the surrounding medium, which in this case is the reaction vessel. The other statements are not necessarily true deductions from the given information. For example, the sign of the enthalpy change (∆H) for an exothermic reaction is negative, not positive. Also, the rate of the reaction can either increase or decrease with time, depending on the specific reaction and conditions. The activation energy is a property of the reactants and is not necessarily related to whether the reaction is exothermic or endothermic.

What is the number of oxygen atoms in 32g of the gas? (O = 16, L = 6.0 X 10,²³ mol_-1)

Detalhes da Resposta

The molar mass of oxygen is 16 g/mol. This means that 1 mole of oxygen gas, which has a molar mass of 32 g/mol (since oxygen exists as O₂), contains 2 moles of oxygen atoms. We can use Avogadro's number (L = 6.0 X 10²³ mol^-1) to find out the number of oxygen atoms present in 32g of oxygen gas. First, we need to find out how many moles of oxygen gas are present in 32g: moles = mass ÷ molar mass = 32g ÷ 32 g/mol = 1 mole So, 32g of oxygen gas contains 1 mole of O₂. Since 1 mole of O₂ contains 2 moles of oxygen atoms, the number of oxygen atoms present in 32g of oxygen gas is: number of oxygen atoms = 2 moles x L = 2 x 6.0 X 10²³ = 1.2 x 10²⁴ Therefore, there are 1.2 x 10²⁴ oxygen atoms in 32g of the gas. Answer matches this result.

The scum formed when soap is mixed with hard water could be

Detalhes da Resposta

(a) Name the crystalline allotrope of sulphur that is stable at room temperature.

(b)(i) Give one example of a fuel that contains significant amount of sulphur as an impurity.

(ii) State one environmental disadvantage of using a fuel that has high sulphur content

Detalhes da Resposta

None

(a) State the main ore of tin.

(b) Write an equation for the reaction involved in the smelting of purified tin ore

(c) List two alloys of tin

Detalhes da Resposta

None

(a) Three elements A, B and C have atomic numbers 8, 11 and 12 respectively.

(i) Write the formula of the compound formed by the chemical combination of A and B.

(ii) State which of the three elements belong(s) to the s-block of the Periodic Table. Give reason for your answer:

(b) List the component elements of bleaching powder.

Detalhes da Resposta

None

(a)(i) State Graham's law of diffusion.

(ii) Consider the reaction represented by the following equation:

N\(_2\)O\(_{4(g)}\)   2NO\(_{2(g)}\)

Night yellow                           dark brown

State what would happen to the vapour density of N\(_2\)O\(_4\) as the temperature of the system is increased. If the system is cooled, would the gases become lighter or darker in colour? Explain your answer in each case.

(b) Explain the following observations:

(i) an inflated balloon that was left in the sun. burst after some time;

(ii) a pure sample of a liquid did not have a constant boiling point at the top and at the base of a high mountain

(c)(i) List two gaseous reducing agents

(ii) Write one equation each to illustrate the reducing property of the gases you listed in (c)(i) above.

Detalhes da Resposta

None

(a) Give the electrolyte of a named secondary electrochemical cell.

(b) Consider the cell represented as shown below: \(Cu_{(s)}Cu^{2+}_{(aq)}/Zn^{2+}_{(aq)}/Zn{(s)}\)

(i) What does the vertical double stroke represent?

(ii) Which of the metals forms the cathode?

(iii) Name the electrode to which each half-cell should be coupled if the oxidation potential of the half-cells are to be determined.

Detalhes da Resposta

None

(a) Give one example of naturally-occurring acids

(b) If 0.5 mole of a mono-alkanoic acid weighs 44g, determine the molecular formula and the name of the acid. (H = 1, C = 12, O = 16)

Detalhes da Resposta

None

(a)(i) State three differences between electrovalent compound and covalent compound.

(ii) Name the type of chemical bonding involved in the formation of ammonium ion from ammonia.

(b)(i) Name the quantum numbers which define an electron within an atom.

(ii) State the orbital in which the fifth electron of an atom is most likely to be found. Sketch the shape of the orbital.

(iii) State the period and the group to which the element boron belongs in the Periodic Table.

(c)(i) What is meant by the entropy of a chemical system?

(ii) Calculate the free energy change for a given reaction at 300 K using the following data obtained for the reaction: \(\Delta\) = -710KJ mol\(^{-1}\); \(\Delta\)S = 0.15 KJ mol\(^{-1}\)K\(^{-1}\)

(iii) From your evaluation in (c)(i) above, state whether the reaction is spontaneous or not at the given temperature. Give reason for your answer.

Detalhes da Resposta

None

(a) Give the products of the following reactions:

(i) hydrolysis of simple proteins.

(ii) alkaline hydrolysis of fats and oils.

(b) A combustion tube was packed with small pieces of broken clay pot and the tube maintained at a temperature of 750K. When the vapour of decane was passed into the tube, the main products included a gaseous hydrocarbon X.

(i) Name the process involved in the reaction. Give its industrial application.

(ii) State the function of the pieces of broken pot in the experiment.

(iii) Give one chemical test to distinguish between X and methane.

(iv) Draw a labelled diagram for the laboratory preparation of X.

(c)(i) State what would be observed if a piece of sodium was added to 10cm\(^3\) of propanol in a beaker. Write an equation for the reaction.

(ii) Give the main product formed when excess acidified potassium heptaoxodichromate (VI) reacts with each of the following: propan-1- ol: propan - 2 -of; State the type of process involved in the reactions.

Detalhes da Resposta

None

(a) Name one metal in each case Which:

(i) exists as a liquid at room temperature,

(ii) can be found in nature in the uncombined state

(b) X and Y are 0.5 mol. dm\(^{-3}\) freshly prepared aqueous solutions of two salts of iron

(II) With excess sodium hydroxide solution, X gave a dirty green precipitate which was not obtained in the case of Y.

Detalhes da Resposta

None

(a) Name: (i) one structural isomer of glucose.

(ii) the process by which starch is converted to glucose.

(b) The open-chain structure of glucose is shown below.

(a) State the functional groups present in the structure.

(ii) Which of the functional groups would react with warm Fehling's solution?

Detalhes da Resposta

None

 Magnesium ribbon reacts with dilute hydrochloric acid at room temperature.

(a) State three ways by which the reaction can be made to proceed faster

(b) Write an equation for the reaction.

Detalhes da Resposta

None

(a) State the method of collecting gases which are denser than air.

(b) Name two gases that can be used to perform the fountain experiment in the laboratory. State the physical property which makes it suitable for the experiment.

Detalhes da Resposta

None

(a)(i) List two uses of aluminium and state how each use is related to the properties of the element.

(ii) State the reason why aluminium oxide is said to be amphoteric.

(b) Calcium is extracted by the electrolysis of fused calcium chloride containing about one-sixth of its mass of calcium fluoride.

(i) Sketch and label the cell used for the extraction.

(ii) Write equations for the reactions at the electrodes.

(iii) State the role of the calcium fluoride in the extraction.

(c) W, X, Y and Z represent four metals which have the following properties: W does not react with cold water but it liberates hydrogen from steam; X is one of the products formed when its trioxonitrate (V) decomposes on strong heating; Z forms the oxide when heated in air and it displaces W from an aqueous solutions of a salt of W; Y tarnishes rapidly exposure and reacts vigorously with cold water. Use the information provided to deduce the order of reactivity of the metals.

Detalhes da Resposta

None

(a) What is meant by the term acid salt? Give one example.

(b) State the reason why an all-glass apparatus must be used for the laboratory preparation of concentrated trioxonitrate (V) acid.

Detalhes da Resposta

None