WAEC SSCE - Chemistry - 2009 (Objective)

Antwoorddetails

Antwoorddetails

In bonded atoms, the electronegativity difference determines the distribution of electrons between the atoms. When there is an increase in the electronegativity difference between two atoms in a bond, one atom attracts electrons more strongly than the other, resulting in an uneven distribution of electrons. This uneven distribution of electrons leads to an increase in the polarity of the bond, as the atom that attracts electrons more strongly gains a partial negative charge, while the other atom gains a partial positive charge. Therefore, an increase in electronegativity difference increases the polarity of the bond.

Antwoorddetails

Antwoorddetails

Steel does not contain copper, so the correct answer is III only. Brass is an alloy of copper and zinc, and bronze is an alloy of copper and tin. Steel is an alloy of iron and carbon, and may also contain other elements such as manganese, nickel, and chromium.

Antwoorddetails

Ethanol reacts with excess acidified K₂Cr ₂O₇ to produce ethanoic acid. This reaction is an oxidation reaction, where ethanol is oxidized to ethanoic acid. The K₂Cr ₂O₇ acts as an oxidizing agent and converts the ethanol to ethanoic acid by removing hydrogen atoms from ethanol and adding oxygen atoms to form a carboxylic acid. The other options listed in the question are not produced in this reaction.

Antwoorddetails

Antwoorddetails

A solution that contains as much solute as it can dissolve at a given temperature is said to be saturated. This means that no more solute can be dissolved in the solution without changing the temperature or pressure. Any additional solute added to a saturated solution will remain undissolved and settle at the bottom of the container. The saturation point is determined by the solubility of the solute in the solvent, which is the maximum amount of solute that can dissolve in a given amount of solvent at a given temperature and pressure.

Antwoorddetails

The question is asking which of the given ions has the same electronic configuration as neon. Neon is a noble gas and has an electronic configuration of 1s²2s²2p⁶. Isoelectronic refers to ions or atoms that have the same number of electrons, thus the same electronic configuration. Among the given options, the ion that has the same number of electrons as neon is the one that has 10 electrons in total. Looking at the options, the only ion with 10 electrons is F^-. Therefore, F^- is isoelectronic with neon. Therefore, the correct option is F^-.

Antwoorddetails

In a dry Leclanche cell, the anode is the negative electrode that releases electrons into the external circuit during the cell's discharge. The anode of a dry Leclanche cell is the zinc container. It acts as the negative terminal of the cell and is where the oxidation of zinc metal to zinc ions takes place, producing electrons and zinc ions which move towards the cathode. Therefore, the correct option is zinc container.

Antwoorddetails

The balanced equation for the reaction shows that 2 moles of NaHCO₃ produce 1 mole of Na₂CO₃, and the molar mass of NaHCO₃ is 84 g/mol. Therefore, 84 g of NaHCO₃ will produce 106 g of Na₂CO₃. To determine the mass of Na₂CO₃ produced from 33.6 g of NaHCO₃, we need to use stoichiometry. 33.6 g NaHCO₃ x (1 mol NaHCO₃ / 84 g NaHCO₃) x (1 mol Na₂CO₃ / 2 mol NaHCO₃) x (106 g Na₂CO₃ / 1 mol Na₂CO₃) = 21.2 g Na₂CO₃ Therefore, the mass of sodium trioxocarbonate (lV) produced by the complete decomposition of 33.6 g of sodium hydrogen trioxocarbonate (IV) is 21.2 g. The correct answer is 21.2 g.

Antwoorddetails

The Solvay process is a method of producing sodium carbonate (Na₂CO₃) from brine and ammonia (NH₃). The process involves reacting brine with ammonia to form ammonium chloride (NH₄Cl), which is then reacted with limestone (CaCO₃) to produce carbon dioxide (CO₂), water (H₂O), calcium chloride (CaCl₂), and ammonia. The carbon dioxide is then reacted with the remaining ammonia to produce ammonium bicarbonate (NH₄HCO₃), which is then heated to produce sodium carbonate (Na₂CO₃), water, and carbon dioxide. Thus, the major product in the Solvay process is Na₂CO₃.

Antwoorddetails

The separation of petroleum fractions is based on their boiling points. The different fractions of petroleum are separated by a process called fractional distillation, where crude oil is heated and vaporized. As the vapor rises through a column, it gradually cools down. As it cools, the vapor condenses into a liquid, and the different fractions with different boiling points condense at different levels in the column. The lighter fractions with lower boiling points, such as gases and liquids like gasoline, condense at the top of the column, while the heavier fractions with higher boiling points, such as liquids like diesel and lubricating oil, condense at lower levels. Thus, the separation of petroleum fractions is dependent on the differences in their boiling points.

Antwoorddetails

The correct answer is AgCI. AgCI is insoluble in water because it is a sparingly soluble salt. When AgCI is added to water, it does not dissolve readily and forms a cloudy mixture. The cloudiness is due to the formation of small insoluble particles of AgCI in water. This is because the attractive forces between Ag+ ions and CI- ions in AgCI are stronger than the attractive forces between these ions and water molecules. In contrast, Pb(NO3)2, Na2CO3, and AgNO3 are soluble salts that dissolve readily in water to form clear solutions.

Antwoorddetails

Antwoorddetails

A double salt is a combination of two different salts which crystallize together to form a single substance with a unique formula. The formula of a double salt is a combination of the formulas of the two salts that make it up. From the given options, the compound that is not a double salt is Zn(OH)NO₃. This is because it does not contain two different salts that have crystallized together to form a new substance. Rather, it is a single compound containing the elements zinc, oxygen, nitrogen, and hydrogen. Therefore, the answer is: Zn(OH)NO₃

Antwoorddetails

Antwoorddetails

∆H represents the enthalpy change of a chemical reaction, which is defined as the difference between the enthalpy of the products and the enthalpy of the reactants. In this case, the equation given is the reaction of hydrogen gas and oxygen gas to form water, so ∆H represents the enthalpy change of the formation of water. Therefore, the correct answer is "formation".

Antwoorddetails

A catalyst is a substance that increases the rate of a chemical reaction by providing an alternative reaction pathway with lower activation energy. Activation energy is the energy required to start a chemical reaction. By lowering the activation energy, a catalyst makes it easier for reactant molecules to react and form products. As a result, the reaction can occur more quickly, which increases the rate of the chemical reaction. Therefore, the correct option is "decreasing the activation energy of the reaction".

Antwoorddetails

Antwoorddetails

Antwoorddetails

James Chadwick discovered the neutron. In the early 1930s, he conducted a series of experiments that led to the discovery of an uncharged subatomic particle within the nucleus of the atom. This particle was later identified as the neutron, which plays a critical role in nuclear reactions and the stability of the nucleus. Chadwick's discovery of the neutron earned him the Nobel Prize in Physics in 1935.

Antwoorddetails

One important medical use of nuclear radiations is radiotherapy. Radiotherapy uses high-energy radiation to destroy cancer cells and shrink tumors. This type of treatment is usually delivered by a machine called a linear accelerator, which produces high-energy X-rays or gamma rays that are directed towards the tumor. The radiation damages the DNA of the cancer cells, causing them to die. Radiotherapy is often used in combination with other treatments such as chemotherapy and surgery, and can be effective in treating a range of cancers including lung, breast, prostate, and brain cancer.

Antwoorddetails

Antwoorddetails

Antwoorddetails

The electron configuration of carbon in its ground state is 1s²2s²2p². This means that there are two electrons in the 1s orbital, two in the 2s orbital, and two in the 2p orbital. However, the question is asking about the excited state of carbon, which means that at least one electron has been promoted from a lower energy level to a higher energy level. In the case of carbon, one of the electrons in the 2s orbital is promoted to the 2p orbital, resulting in the electron configuration [ ₆C] 1s²2s¹2p³. Therefore, the correct answer is 1s²2s¹2px¹2py¹2pz¹.

Antwoorddetails

Antwoorddetails

Dry hydrogen chloride gas (HCl) when dissolved in methylbenzene does not affect litmus paper. This is because methylbenzene is a non-polar solvent and does not contain water, which is required for litmus paper to change color. Therefore, litmus paper cannot be used to test the acidity or basicity of the solution.

Antwoorddetails

The element with the symbol \(\frac{35}{17}\)X represents an atom of chlorine with 17 protons and 18 neutrons. Elements with the same number of protons have the same chemical properties. Therefore, the answer is (a) an element with atomic number 17, which is chlorine.

Antwoorddetails

The Roman numeral in the compound QCI₅ indicates the oxidation state of element Q in the compound, which is 5. From this information, we can determine the group number of element Q in the periodic table. Group number of an element is equal to its highest oxidation state. Since the oxidation state of element Q in the compound is 5, it belongs to group V of the periodic table. Therefore, the correct answer is V.

Antwoorddetails

Antwoorddetails

Antwoorddetails

The atomic number of an element is defined as the number of protons in the nucleus of its atom. In the symbol ⁴⁰20_Ca, 20 is written as a subscript, which represents the atomic number of calcium. Therefore, the number of protons in the nucleus of ⁴⁰20_Ca is 20. Answer: 20.

Antwoorddetails

Antwoorddetails

The p-sub energy level has a total of three orbitals. These orbitals are represented as Px, Py, and Pz. Each orbital can hold a maximum of two electrons, and together they can hold a total of six electrons. Therefore, the correct answer is 3.

Antwoorddetails

The question is asking which of the given properties is NOT a characteristic of transition elements. Transition elements are a group of elements in the periodic table that have partially filled d orbitals. They have several unique properties, including the ability to form complex ions, form coloured compounds, and exhibit catalytic abilities. However, one property that is not typically associated with transition elements is fixed oxidation states. Unlike many other elements, transition elements can have multiple oxidation states and are not limited to one fixed state. Therefore, the correct answer to the question is "fixed oxidation states."

Antwoorddetails

To calculate the relative atomic mass of X, we need to take into account the mass and abundance of each isotope of X. We know that element X has two isotopes: ⁹X and ¹¹X. To calculate the relative atomic mass of X, we can use the formula: Relative atomic mass of X = (mass of ⁹X x % abundance of ⁹X) + (mass of ¹¹X x % abundance of ¹¹X) / 100 Substituting the values we have, we get: Relative atomic mass of X = (9 x 70) + (11 x 30) / 100 Relative atomic mass of X = 630 + 330 / 100 Relative atomic mass of X = 9.6 Therefore, the relative atomic mass of X is 9.6.

Antwoorddetails

A consequence of global warming is flooding. Global warming causes the temperature of the earth to rise, leading to the melting of glaciers and ice caps, which increases the volume of water in the oceans. This increase in water level leads to flooding in low-lying areas and coastal regions. Additionally, global warming can cause more intense and frequent weather events, such as hurricanes and heavy rainfall, which can also lead to flooding.

Antwoorddetails

The Kelvin temperature scale is an absolute temperature scale where 0 Kelvin represents the lowest possible temperature (absolute zero). The Kelvin temperature scale is related to the Celsius scale by adding 273.15 to the Celsius value. To convert -14°C to Kelvin, we need to add 273.15 to the value. Thus, -14°C + 273.15 = 259.15 K. Therefore, the value of -14°C on the Kelvin temperature scale is 259 K (option a).

Antwoorddetails

Antwoorddetails

NH₃ is not linear in shape. It has a trigonal pyramidal shape because of the presence of one lone pair of electrons on the nitrogen atom. The other three bonded hydrogen atoms are at an angle of approximately 107 degrees to each other. CO₂, O₂, and HCl are all linear in shape.

Antwoorddetails

The electron configuration of an atom describes the arrangement of electrons in its energy levels or orbitals. The notation [ 6C ] means that the excited carbon atom has six electrons in its outermost energy level, which is the second energy level (n=2). The correct electron configuration for a carbon atom in its excited state is 1s²2s¹2p². The notation [ 6C ] can be understood as follows: the normal electron configuration for carbon is 1s²2s²2p², meaning that it has four electrons in its outermost energy level. By exciting one of the 2s electrons to the empty 2p orbital, the atom now has a total of six electrons in the n=2 energy level, hence the notation [ 6C ]. Option D, 1s²2s¹2px¹2py¹2pz¹, represents the electron configuration of a carbon atom in its ground state.

Antwoorddetails

When proteins are heated to high temperatures, they undergo denaturation. Denaturation is the process by which a protein loses its three-dimensional structure, which is critical to its function. This change in structure is due to the breaking of the weak bonds holding the protein together, such as hydrogen bonds, ionic bonds, and hydrophobic interactions. The loss of these bonds causes the protein to unfold and lose its specific shape, which can lead to a loss of function. Denaturation can also be caused by other factors such as changes in pH, exposure to detergents or solvents, or high pressure.

Antwoorddetails

Ethene is the raw material used in the plastic industry. Ethene, also known as ethylene, is a hydrocarbon with the formula C2H4. It is produced from the cracking of petroleum fractions or natural gas. Ethene is a monomer that can be polymerized to form polyethylene, which is a versatile plastic used in a wide range of applications, from packaging materials to toys and medical devices. Calcium, hydrogen, and methane are not typically used as raw materials in the plastic industry.

Antwoorddetails

NaOH will readily dissolve in water. This is because it is a strong base and its ionic bonds with Na⁺ and OH^- are easily broken in the presence of water, allowing the ions to separate and become hydrated. In contrast, Cu(OH)₂, Pb(OH)₂, and Zn(OH)₂ are relatively insoluble in water, meaning that their ionic bonds are not easily broken and they do not readily dissociate into their constituent ions in water.

Antwoorddetails

Antwoorddetails

The correct statement about the behavior of the atom is that cations are smaller than the parent atom. When an atom loses one or more electrons to form a cation, the number of electrons is less than the number of protons, resulting in a net positive charge. This positive charge attracts the remaining electrons more strongly towards the nucleus, causing the atomic radius to decrease. Therefore, cations are smaller than their parent atoms. Conversely, when an atom gains one or more electrons to form an anion, the negative charge causes the electron cloud to expand, resulting in a larger atomic radius than the parent atom. Hence, the other options are incorrect.

Antwoorddetails

Salts that contain water of crystallization are said to be hydrated. Water of crystallization is the water molecules that are tightly bound to the salt molecules in a crystal structure. These water molecules can be removed by heating or by exposing the salt to dry air. When the water is removed, the salt becomes anhydrous. The number of water molecules present in a hydrated salt is indicated by a dot followed by a number in the chemical formula. For example, CuSO4.5H2O is copper sulfate pentahydrate, which means it contains five molecules of water of crystallization.

Antwoorddetails

Period 3 of the periodic table includes the elements sodium (Na), magnesium (Mg), aluminum (Al), silicon (Si), phosphorus (P), sulfur (S), and chlorine (Cl). The correct electronic configuration for an element in period 3 should have 3 energy levels and electrons distributed among those energy levels according to the Aufbau principle. Looking at the options given: - represents an element in period 2 as it has only 2 energy levels. - represents the noble gas configuration of the element neon (Ne) in period 2. - represents an element in period 3 with 3 energy levels, where the outermost energy level has 6 electrons (3s² 3p⁴). This configuration is consistent with the element sulfur (S). - represents an element in period 4 as it has 4 energy levels. Therefore, the correct option representing an element in period 3 is with the electronic configuration 1s² 2s² 2p⁶ 3s² 3p⁴.

Antwoorddetails

The reaction shown in the equation ²³⁸₉₂U + ¹₀ → ¹³⁹ ₅₆Ba + ⁹⁴ ₃₆Kr + 3¹ ₀n represents nuclear fission. Nuclear fission is a process in which a heavy nucleus is split into two or more smaller nuclei and typically releases a large amount of energy in the form of heat and radiation. In this particular reaction, uranium-238 is bombarded with a neutron, which causes it to split into two smaller nuclei (barium-139 and krypton-94) and three neutrons. This process also releases a significant amount of energy in the form of radiation.

Antwoorddetails

The rate of the reaction represented by the equation 2HCI(aq) + CaCO3(s) → CaCI2(aq) + H2O(I) + CO2(g) can be affected by various factors: - Pressure: Pressure affects the rate of a reaction only if there are gases involved in the reaction. In this reaction, CO2 is produced as a gas, so increasing the pressure will increase the rate of the reaction. - Concentration: Increasing the concentration of the reactants will increase the number of collisions between the reactant particles and thus increase the rate of the reaction. - Nature of reactants: The nature of the reactants can affect the rate of the reaction. For example, a reaction involving reactive metals like magnesium will proceed faster than a reaction involving less reactive metals like copper. - Temperature: Increasing the temperature will increase the kinetic energy of the particles, resulting in more collisions and thus increasing the rate of the reaction. Therefore, the factors that will affect the rate of this particular reaction are ll, lll, and IV.

Antwoorddetails

The reaction between propene and 1 mole of hydrogen iodide results in the addition of the hydrogen iodide molecule to the carbon-carbon double bond in propene. The hydrogen atom adds to one carbon atom of the double bond, and the iodine atom adds to the other carbon atom. As a result, the product formed is CH ₃CHICH₃, which is 2-iodopropane. Therefore, the correct answer is: the product of the reaction between propene and 1 mole of hydrogen iodide is CH₃CHICH₃.

Antwoorddetails

The number of particles in one mole of a chemical compound is called Avogadro's number. Avogadro's number is a constant that represents the number of particles (such as atoms, molecules, or ions) in one mole of a substance, which is approximately 6.02 x 10^23 particles. This number is used to convert between the number of moles of a substance and the number of particles it contains. For example, one mole of water contains 6.02 x 10^23 water molecules. Therefore, Avogadro's number is the correct option.

Antwoorddetails

The correct option is "have high boiling points." Covalent compounds are formed by sharing of electrons between two non-metal atoms. These compounds generally have low melting and boiling points due to their weak intermolecular forces. They are mostly gaseous or volatile liquids. Covalent compounds also do not dissociate into ions in solution, and therefore they are non-electrolytes. However, some covalent compounds with strong intermolecular forces may have high boiling points.