JAMB UTME - Physics - 2018

Antwoorddetails

To calculate the distance between point A and point B, we can use the formula: Distance = Speed x Time where the speed is given as 100 km/h and the time is given as 15 minutes, which we need to convert to hours. 1 hour = 60 minutes, so 15 minutes = 15/60 hours = 0.25 hours. Now, we can substitute these values into the formula: Distance = 100 km/h x 0.25 h = 25 km Therefore, the distance between point A and point B is 25 km. is the correct answer.

Antwoorddetails

Antwoorddetails

Let the total number of pulleys used in both the blocks be $n$.
In a block-and-tackle pulley system, the velocity ratio is equal to n.
Efficiency = $\frac{\text{MA}}{\text{VR}}\times 100\%$
$\text{MA}=\frac{\text{L}}{\text{E}},\text{VR}=n$
Efficiency = $\frac{\text{L}}{\text{E}}\times \frac{1}{\text{n}}\times 100\%$
$\text{E}=\frac{\text{L}}{\text{Eff.}\times n}\times 100\%$
$\text{E}=\frac{120\text{N}}{40\%\times 6}\times 100\%$
$\text{E}=50\text{N}$

Antwoorddetails

The force provided by the engine to keep a vehicle moving at a constant speed is proportional to the power (P) required from the engine. This power is proportional to the product of the speed (V) and force (P), so the relationship can be expressed as P = kV, where k is a proportionality constant.

Antwoorddetails

The relative density of a substance is defined as the ratio of its density to the density of a reference substance, usually water at 4 degrees Celsius. In this problem, we can use the principle of buoyancy to determine the density of the solid. When an object is submerged in a fluid, it experiences an upward force called the buoyant force, which is equal to the weight of the fluid displaced by the object. If the object is less dense than the fluid, it will float, and if it is more dense, it will sink. We are given that the solid weighs 15 N in water, which means it displaces 15 N of water. The weight of the water displaced is equal to the buoyant force on the solid, which is equal to the weight of the solid when it is completely submerged in water. Therefore, the weight of the solid when it is completely submerged in water is 15 N. We are also given that the weight of the solid in air is 45 N. The difference between the weight of the solid in air and water is equal to the weight of the water displaced, which is 30 N. This means that the volume of water displaced by the solid is 30/9.8 = 3.06 L (since the density of water is 1000 kg/m^3 or 9.8 N/L). The relative density of the solid is equal to its density divided by the density of water. We can find the density of the solid by dividing its weight in air by its volume: Density of solid = Weight of solid in air / Volume of solid Density of solid = 45 N / (45 N - 15 N) [since weight of displaced water is 15N] Density of solid = 45 N / 30 N Density of solid = 1.5 N/L Therefore, the relative density of the solid is: Relative density = Density of solid / Density of water Relative density = 1.5 N/L / 1000 N/L Relative density = 0.0015 So the answer is 0.33 (rounded to two decimal places).

Antwoorddetails

When a conductor is connected to the earth, electrons flow to the earth. Electrons are negatively charged particles that are present in all conductors. When a conductor is connected to the earth, it creates a path for electrons to flow from the conductor to the earth, which helps to balance the electric potential and prevent the buildup of electric charge. This flow of electrons is known as grounding and is an important safety measure in electrical systems.

Antwoorddetails

Radioactive decay releases different types of energetic emissions. The three most common types of radioactive emissions are alpha particles, beta particles, and gamma rays.

Antwoorddetails

Antwoorddetails

The photocell works on the principle of the emission of electrons by incident radiation. In simple terms, a photocell is a device that converts light energy into electrical energy. It does this by using a material (such as silicon) that releases electrons when it is exposed to light. These electrons can then be collected and used to produce a current, which can be used to power an electrical device. The more light that hits the photocell, the more electrons are released and the greater the electrical current.

Antwoorddetails

The phenomenon of a mirage can be explained by options I and III. A mirage is an optical illusion that occurs when light rays passing through a medium with varying refractive indices create a false image of distant objects or even the sky. In hot weather, the air near the road surface becomes hotter and less dense than the air above, causing the light passing through it to bend and create a reflection of the sky or objects in the distance. This effect is known as a temperature inversion. Additionally, light from the sky can be reflected upwards after coming close to the road surface, adding to the illusion of a reflected object or the sky. Option II, which suggests that road surfaces become good reflectors in hot weather, is not a valid explanation for a mirage. Therefore, the correct answer is: I and III only.

Antwoorddetails

The correct answer is "Viscosity". Viscosity is the property of a fluid that describes its resistance to flow. When two layers of liquid are in relative motion, the viscosity of the liquid causes friction between the layers. This friction creates a resistance to the movement of one layer past the other. The greater the viscosity of the liquid, the greater the friction and the more difficult it is for the layers to move past each other. This property is important in many industrial and natural processes, such as the flow of oil in pipelines or the movement of blood through the human body.

Antwoorddetails

To calculate the energy dispatched in the resistor, we need to use the formula: Energy = Power x Time Where Power is the amount of electrical power consumed by the resistor, and is equal to the product of the voltage across the resistor and the current flowing through it: Power = Voltage x Current In this case, the voltage across the resistor is 12V, and the current flowing through it is 2A. Therefore, the power consumed by the resistor is: Power = 12V x 2A = 24W Now, we can substitute this value of power along with the given time of 5 minutes into the formula for energy: Energy = 24W x 5min x 60s/min = 7,200J Therefore, the energy dispatched in the resistor in 5 minutes is 7,200J. is the correct answer.

Antwoorddetails

The half-life of a radioactive material is the time it takes for half of the atoms in a sample to decay. The fraction of atoms left after a certain number of half-lives can be calculated using the formula: fraction left = (1/2)^(number of half-lives) Let's use this formula to solve the problem. We know that the fraction of atoms left after 120 years is 1/64, which means that: (1/2)^(number of half-lives) = 1/64 To solve for the number of half-lives, we can take the logarithm of both sides: log[(1/2)^(number of half-lives)] = log(1/64) Using the rule that log(a^b) = b*log(a), we can simplify the left side of the equation: number of half-lives * log(1/2) = log(1/64) Dividing both sides by log(1/2), we get: number of half-lives = log(1/64) / log(1/2) Using a calculator or the change of base formula, we can evaluate this expression: number of half-lives = 6 Therefore, the half-life of the material is 120/6 = 20 years.

Antwoorddetails

Molecules cannot be given energy during the heating and the molecules of oil cannot force each other out

Antwoorddetails

Antwoorddetails

The type of reaction represented by the given scheme is a nuclear fission reaction. Nuclear fission is a process where a heavy nucleus is split into smaller nuclei with the release of energy. In the given scheme, a heavy element X is split into two lighter elements, Y and Z, along with the release of energy and some neutrons (n). In a nuclear fission reaction, a neutron is usually absorbed by the nucleus of the heavy element, which then becomes unstable and splits into two smaller nuclei and some neutrons. These neutrons can then go on to split other heavy nuclei, resulting in a chain reaction. In the given scheme, the release of energy and the presence of neutrons suggest that it is a fission reaction. Moreover, the scheme depicts the process of splitting a heavy element into two lighter elements, which is a characteristic of a fission reaction. Therefore, the type of reaction represented by the given scheme is a nuclear fission reaction.

Antwoorddetails

Antwoorddetails

Volume of liquid displaced
= $\frac{2}{3}$(0.5)${}^3$
Mass of liquid displaced = mass of floating cube = 75kg
Density of liquid = $\frac{mass}{volume}$
= $\frac{75}{\left(\frac{7}{3\left(0.5\right)}\right)}$ × 3
= 0.9 × 103kgm${}^{-3}$
R.D of liquid = $\frac{\left(0.9\right)}{\left(1.0\right)}$ × 103
= 0.9

Antwoorddetails

The most suitable instrument for measuring the outside diameter of a narrow pipe in a few millimeters in diameter is a micrometer screw gauge. A micrometer screw gauge is a precision measuring instrument that can accurately measure small dimensions with high accuracy. It has a spindle that moves towards an anvil and a scale that indicates the measurement. The spindle moves in response to a small rotation of the thimble, allowing for precise and sensitive measurements. In contrast, a pair of calipers or a meter rule may not be accurate enough for measuring such small dimensions, and a tape rule may not be able to fit inside the narrow pipe. Therefore, a micrometer screw gauge is the most suitable option for measuring the outside diameter of a narrow pipe in a few millimeters in diameter.

Antwoorddetails

Antwoorddetails

The product of force and time is known as impulse. Impulse can be defined as the change in momentum that an object experiences as a result of a force being applied to it over a period of time. In simpler terms, impulse is the "push" that an object receives from a force acting on it for a certain amount of time. The more force applied, or the longer the time the force is applied, the greater the impulse and the greater the change in momentum of the object. It's important to note that impulse is a vector quantity, meaning it has both magnitude and direction. Impulse is a measure of the ability of a force to cause an object to change its velocity, and can be used to explain many phenomena in physics, such as why a heavy object is harder to stop than a lighter one, or why a soccer ball changes direction when it is kicked.

Antwoorddetails

The electrochemical equivalent of silver is a measure of the amount of silver that is deposited on a surface per unit of charge. In this case, the electrochemical equivalent of silver is 0.0012 grams per Coulomb of charge. To deposit 36.0 grams of silver by electrolysis, we need to know the amount of charge that must be passed through the solution. The amount of charge is given by: Q = m/z where m is the mass of silver to be deposited, 0.0012 is the electrochemical equivalent of silver, and z is the charge on one mole of electrons (z = 1 for a single electron). So, the amount of charge required is: Q = 36.0 g / 0.0012 g/C = 30000 C The current, I, is given by: I = Q / t where t is the time for which the current is flowing. In this case, t = 5 minutes. So, the current required is: I = 30000 C / (5 x 60 s) = 100 A Therefore, the current must be 100 Amperes.

Antwoorddetails

The critical angle is the angle of incidence at which light is just able to pass through the interface between two media and not reflect back. When light travels from a medium with a higher refractive index to a medium with a lower refractive index, it slows down and bends towards the normal. If the angle of incidence is increased, the light will eventually reach a point where it will not be able to escape the higher index medium and will be totally reflected back. This is the critical angle. The formula for the critical angle can be expressed as follows: sin(θc) = n2/n1 Where θc is the critical angle, n1 is the refractive index of the first medium, and n2 is the refractive index of the second medium. In this case, the first medium is the transparent medium and the second medium is air, which has a refractive index of approximately 1. By substituting the value of sin(θc) with the value of 340, and n2 with 1, we can solve for n1. sin(340) = n1/1 n1 = 1/sin(340) The value of n1 calculated using this formula is approximately 1.79, which means that the refractive index of the transparent medium is 1.79.

Antwoorddetails

To solve this problem, we can use the principle of conservation of energy, which states that energy cannot be created or destroyed, only transferred or converted from one form to another. In this case, the energy transferred is in the form of heat. We can use the formula: Q = m*c*(ΔT) where Q is the heat transferred, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature. First, we can calculate the heat transferred from the hot water to the cold water: Q1 = 150g * 4.18 J/(g°C) * (60°C - T) Q1 = 627 * (60 - T) where T is the temperature of the mixture. Next, we can calculate the heat transferred from the cold water to reach the final temperature of the mixture: Q2 = 300g * 4.18 J/(g°C) * (T - 20°C) Q2 = 1254 * (T - 20) Since the heat transferred between the two water samples must be equal, we can set Q1 equal to Q2 and solve for T: 627 * (60 - T) = 1254 * (T - 20) 37620 - 627T = 1254T - 25080 1881T = 62760 T = 33.4°C Therefore, the temperature of the mixture is approximately 33°C. Answer: 33°C

Antwoorddetails

Efficiency = $\frac{\text{useful energy output from machine}}{\text{energy input into machine}}$
= $\frac{E3}{E2}$

Antwoorddetails

The essential physical property of the wire used for making fuses is low melting point. This means that the wire should have a low temperature at which it melts and breaks, interrupting the flow of electrical current. This is important in a fuse because when there is an overload of electrical current, the wire will melt, breaking the circuit and preventing damage to the electrical system. The other options, low density, low electrical resistivity, and hypothermal conductivity, are not as important for a fuse wire. Low density is the property of a material to be light, and it doesn't necessarily affect the performance of a fuse wire. Low electrical resistivity is the property of a material to have low resistance to the flow of electrical current, and it doesn't necessarily affect the performance of a fuse wire either. Hypothermal conductivity is the property of a material to conduct heat poorly, and it also doesn't necessarily affect the performance of a fuse wire.

Antwoorddetails

The magnitude of the resulting impulse can be calculated using the formula impulse = change in momentum. In this scenario, the ball experiences a change in velocity (speed) as it hits the wall. The ball's initial momentum is equal to its mass times its velocity, and its final momentum is zero since it comes to a stop after hitting the wall. The change in momentum is equal to the final momentum minus the initial momentum, which is equal to the negative of the initial momentum. Since the ball has a mass of 5.0 kg and a velocity of 2 m/s, its initial momentum is 5.0 kg * 2 m/s = 10.0 kg m/s. Therefore, the change in momentum is -10.0 kg m/s and the magnitude of the resulting impulse is 10.0 kg m/s, which is equal to 10.0 Ns. So, the correct answer is 10.0kgms−1.

Antwoorddetails

Cathode rays are streams of electrons. They were first discovered by scientists experimenting with vacuum tubes, and they observed that a glowing beam of particles traveled from the negatively charged electrode (the cathode) to the positively charged electrode (the anode). These particles were found to have a negative charge, which was later identified as electrons. Cathode rays played an important role in the development of electronics and the understanding of atomic structure.

Antwoorddetails

The man first walks 1 km due east, which means he has moved 1 km horizontally to the right of his starting point. Then, he walks 1 km due north, which means he has moved 1 km vertically upwards from his previous position. To find his displacement, we need to draw a straight line from his starting point to his final position, which represents the shortest distance between the two points. This line is called the displacement vector. We can use the Pythagorean theorem to calculate the length of the displacement vector. The horizontal and vertical distances are the two legs of a right-angled triangle, and the hypotenuse is the length of the displacement vector. Using the Pythagorean theorem, we get: displacement = √((1 km)^2 + (1 km)^2) = √2 km The direction of the displacement vector is the angle between the displacement vector and the due north direction. We can find this angle using trigonometry. The tangent of the angle is the ratio of the horizontal distance to the vertical distance: tan(θ) = (1 km) / (1 km) = 1 Using a calculator, we can find that the angle is 45°. Therefore, the man's displacement is √2 km in the direction N 45° E. So, the correct answer is √2km N 45°E.

Antwoorddetails

In case of small drops of mercury, the gravitational potential energy is negligible in comparison to the potential energy due to surface tension.Consequently, to keep the drop in equilibrium, the mercury drop’s surface tends to contract so that its surface area will be the least for a sphere and the drops will be spherical.
But in the case of bigger drops of mercury, the potential energy due to gravity is predominant over the potential energy due to surface tension.Consequently, to keep equilibrium , the mercury drop tends to assume minimum potential energy as possible, the drop becomes oval in shape and lower center of gravity.

Antwoorddetails

To determine the final temperature of the water, we can use the formula: Q = mcΔT where Q is the heat transferred, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature. We know that the power of the electric heating coil is 1KW, which means it transfers 1000 Joules of energy per second. In 2 minutes, or 120 seconds, it transfers 120,000 Joules of energy to the water. The mass of the water is given as 2kg and the specific heat capacity of water is 4000 J/kg°C. We can assume that the initial temperature of the water is 30°C. Using the formula, we can solve for the change in temperature: 120,000 J = (2 kg)(4000 J/kg°C)(ΔT) ΔT = 15°C Therefore, the final temperature of the water is 30°C + 15°C = 45°C. So, the final water temperature is 45.0oC.

Antwoorddetails

The fission process refers to the splitting of an atomic nucleus into two or more smaller nuclei. One of the key features of the fission process is that it can lead to a chain reaction, where the neutrons released during fission can go on to trigger additional fission reactions. This chain reaction can produce a large amount of energy, as is the case in nuclear power plants and nuclear weapons. Another feature of the fission process is that it typically produces radioactive products. These products can remain radioactive for a long time, which is why there are concerns about the safe disposal of nuclear waste. Additionally, the fission process typically releases neutrons, which can go on to cause further fission reactions. This neutron release is an important aspect of the chain reaction mentioned earlier. Finally, the fission process is accompanied by a small loss of mass, which is converted into energy according to Einstein's famous equation E=mc². This loss of mass is what allows the large amount of energy to be released during a fission reaction.

Antwoorddetails

The density of a substance is defined as its mass per unit volume. Therefore, the mass of the palm oil before frying was: Mass = Density x Volume = 0.9 g/cm³ x 400 cm³ = 360 g After frying, the mass of the palm oil remains the same, but its density changes to 0.6 g/cm³. Therefore, the new volume of the palm oil can be calculated by rearranging the density formula: Volume = Mass / Density = 360 g / 0.6 g/cm³ = 600 cm³ So the new volume of the palm oil after frying is 600 cm³. is the correct answer.

Antwoorddetails

The tendency of a body to remain at rest or to continue moving with a constant velocity (in a straight line at a constant speed) when no force is acting on it is called inertia. Inertia is a property of matter, and the amount of inertia depends on the mass of an object. Inertia can also be thought of as a resistance to changes in motion, meaning that an object at rest will tend to stay at rest, and an object in motion will tend to stay in motion unless acted upon by an external force. This property of inertia is what makes it difficult to start, stop, or change the direction of motion of an object. The force required to overcome the inertia of an object depends on the mass of the object and the magnitude of the acceleration desired. Therefore, the greater the mass of an object, the greater its inertia, and the more force required to change its motion.

Antwoorddetails

The dimension of pressure is ML^-1T^-2 Pressure is defined as the force per unit area. This means that pressure is dependent on the force applied and the area over which it is applied. The unit of force is measured in Newtons (N), and the unit of area is measured in square meters (m²). Therefore, the unit of pressure is N/m², which is also known as Pascals (Pa). To determine the dimension of pressure, we need to break down the units into their fundamental dimensions of mass (M), length (L), and time (T). Force is measured in N, which is kg m/s². Area is measured in m², which is L². Therefore, the dimension of pressure can be calculated as (kg m/s²)/(L²), which simplifies to ML^-1T^-2.

Antwoorddetails

The linear magnification of an image is given by the formula: magnification = height of image / height of object = -v/u where v is the image distance, u is the object distance, and the negative sign indicates that the image is inverted. In this problem, the object is placed 20cm from a concave mirror of focal length 10cm. Since the object is placed beyond the focal point, the image will be real and inverted. Using the mirror formula 1/f = 1/v + 1/u, we can find the image distance v: 1/10 = 1/v + 1/20 Solving for v, we get: v = -20 cm Now, we can use the magnification formula to find the linear magnification: magnification = -v/u = -(-20)/20 = 1 Therefore, the linear magnification of the image produced is 1, which means the image is the same size as the object and is also inverted. The answer is: 1.

Antwoorddetails

When a particle of mass M splits into two, the total mass is conserved, and so the sum of the masses of the two resulting particles must be equal to M. If one of the particles of mass M1 moves with velocity V1, we can use the law of conservation of momentum to determine the velocity of the second particle. The law of conservation of momentum states that the total momentum of a system of particles remains constant if no external forces act on the system. In this case, the initial momentum of the system is zero, since the particle was initially at rest. After the particle splits, the momentum of the system is the sum of the momenta of the two resulting particles. Let's use the subscript 1 to represent the first particle of mass M1 and the subscript 2 to represent the second particle of mass M-M1. By conservation of momentum, we have: 0 = M1*V1 + (M - M1)*V2 Solving for V2, we get: V2 = -M1/M*(V1) Therefore, the second particle moves in the opposite direction with velocity -M1/M*(V1). This means that the two particles move in opposite directions, with the ratio of their velocities determined by the ratio of their masses. Option (D) in the table shows the correct answer, which is -M1/M*(V1).

Antwoorddetails

The impulse experienced by the ball can be calculated using the principle of conservation of momentum, which states that the total momentum before the collision is equal to the total momentum after the collision. In this case, the momentum of the ball before the collision is: p1 = m * v1 where m is the mass of the ball and v1 is its velocity before the collision. Substituting the values given in the problem, we get: p1 = 0.8 kg * 5 m/s = 4 kg m/s After the collision, the ball rebounds with the same speed but in the opposite direction, so its velocity after the collision is: v2 = -5 m/s The momentum of the ball after the collision is: p2 = m * v2 Substituting the values, we get: p2 = 0.8 kg * (-5 m/s) = -4 kg m/s The negative sign indicates that the direction of the momentum is opposite to that before the collision. The change in momentum of the ball is given by: Δp = p2 - p1 Substituting the values, we get: Δp = (-4 kg m/s) - (4 kg m/s) = -8 kg m/s The negative sign indicates that the impulse experienced by the ball is in the opposite direction to its initial momentum, which is the direction of the wall. Therefore, the impulse experienced by the ball is 8 kg m/s. Therefore, the correct option is: 8kgm/s.

Antwoorddetails

A vernier caliper is a measuring device used to precisely measure linear dimensions. It is a very useful tool to use when measuring the diameter of a round objects like cylinders because the measuring jaws can be secured on either side of the circumference.
Vernier calipers have both a fixed main scale and a moving vernier scale. The main scale is graduated in either millimetres or tenths of an inch. The vernier scale allows much more precise readings to be taken (usually to the nearest 0.02mm or 0.001 inch) in comparison to a standard ruler (which only measures to th nearest 1mm or 0.25 inch).
The vernier scale was invented by French mathematician Pierre Vernier in 1631. As part of the vernier caliper, it is used together with the main scale, and helps to provide very precise measurements. Vernier calipers usually show either imperial or metric measurements, but some measure in both.

Antwoorddetails

(ii) Adhesion : The force of attraction between unlike molecules, i.e. between the molecules of different liquids or between the molecules of a liquid and those of a solid body when they are in contact with each other, is known as the force of adhesion. This force enables two different liquids to adhere to each other or a liquid to adhere to a solid body or surface.