How Materials Are Used In Products
Gbogbo ọrọ náà
A wooden train for a two year old is made of beech. A flat pack wardrobe is made of faced chipboard. Both are timber based, both are furniture in the widest sense, and the materials are not interchangeable in either direction: a beech wardrobe would cost more than the room it stands in, and a chipboard toy would splinter in a fortnight. The difference is not that one material is better. It is that each product asks a different question of its material.
This lesson takes the eight commercial products the specification names, flyers and leaflets, card-based food packaging, traditional timber children's toys, flat pack furniture, cooking utensils, hand tools, polymer seating and electrical fittings, and works out what each one demands and how the material supplies it. Then it covers the modification of properties for specific purposes: additives to prevent moisture transfer, seasoning to reduce the moisture content of timbers, annealing to soften material and improve malleability, and stabilisers to resist ultraviolet degradation. Finally it covers how to shape and form materials using cutting, abrasion and addition, from creasing and perforating card to brazing and welding metal. This is specialist technical principles content, examined in Section B of Paper 1.
Ebumnobi
- Properties of materials
- Students must know and understand how different properties of materials and components are used in commercial products. How properties influence use and affect performance. Students must know and understand the physical and mechanical properties relevant to commercial products in their chosen area as follows:
- Papers and boards (flyers/leaflets and card-based food packaging).
- Timber based materials (traditional timber children’s toys and flat pack furniture).
- Metal based materials (cooking utensils and hand tools).
- Polymers (polymer seating and electrical fittings).
- The modification of properties for specific purposes
- Additives to prevent moisture transfer (paper and boards).
- Seasoning to reduce moisture content of timbers (timber based materials).
- Annealing to soften material to improve malleability (metal based materials).
- Stabilisers to resist UV degradation (polymers).
- How to shape and form using cutting, abrasion and addition
- Papers and boards (how to cut, crease, score, fold and perforate card).
- Timber based materials (how to cut, drill, chisel, sand and plane).
- Metal based materials (how to cut, drill, turn, mill, cast, braze and weld).
- Polymers (how to cut, drill, cast, deform, print and weld).
Maapụ uche
E seela isiokwu a ka ị hụ otu echiche si ejikọta.
Mepee maapụ uche na ngwa
Akwụkwọ Ọmụmụ
Ndetu Nkuzi Zuru Ezu di na Ngwa Green Bridge
Nweta ngwa Green Bridge CBT na ekwenti gi ma o bu kompiuta maka ulo akwukwo IGCSE zuru oke: akwukwo ule ndi gara aga, usoro nyocha, eserese uche, kaadi omumu na nkuzi olu.
Nnyocha Ọmụmụ
Ekele diri gi maka imecha ihe karịrị na How Materials Are Used In Products. Ugbu a na ị na-enyochakwa isi echiche na echiche ndị dị mkpa, ọ bụ oge iji nwalee ihe ị ma. Ngwa a na-enye ụdị ajụjụ ọmụmụ dị iche iche emebere iji kwado nghọta gị wee nyere gị aka ịmata otú ị ghọtara ihe ndị a kụziri.
Ị ga-ahụ ngwakọta nke ụdị ajụjụ dị iche iche, gụnyere ajụjụ chọrọ ịhọrọ otu n’ime ọtụtụ azịza, ajụjụ chọrọ mkpirisi azịza, na ajụjụ ede ede. A na-arụpụta ajụjụ ọ bụla nke ọma iji nwalee akụkụ dị iche iche nke ihe ọmụma gị na nkà nke ịtụgharị uche.
Jiri akụkụ a nke nyocha ka ohere iji kụziere ihe ị matara banyere isiokwu ahụ ma chọpụta ebe ọ bụla ị nwere ike ịchọ ọmụmụ ihe ọzọ. Ekwela ka nsogbu ọ bụla ị na-eche ihu mee ka ị daa mba; kama, lee ha anya dị ka ohere maka ịzụlite onwe gị na imeziwanye.
- Electrical fittings are usually made from a thermosetting polymer because it A. can be recycled easily. B. is tough and flexible. C. will not soften if the fitting becomes hot. D. is the cheapest polymer available. Answer: C
- Annealing a metal is carried out in order to A. harden it. B. soften it and improve its malleability. C. prevent it from conducting electricity. D. increase its density. Answer: B
- Which process presses a groove into board so that it folds cleanly without cracking the printed face? A. Creasing B. Perforating C. Scoring D. Die cutting Answer: A
- Stabilisers are added to a polymer used outdoors mainly to A. make it stiffer. B. reduce its density. C. slow its degradation by ultraviolet light. D. improve its electrical conductivity. Answer: C
- In brazing, which of the following melts? A. Only the filler B. Only the parent metals C. Both the filler and the parent metals D. Neither Answer: A
Rue ajuju ndi a n'ime ngwa ahu
Rue ajuju ndi a n'ime ngwa ahu
Akwụkwọ A Na-atụ Aro
Meecha Ajụjụ Ule Ọmarịcha
Ị chọrọ ime ajụjụ ule ọmarịcha gbasara How Materials Are Used In Products? Budata ngwa Green Bridge CBT iji nweta ajụjụ ule ọmarịcha na nyocha zuru ezu gbasara isiokwu a.
Budata Ngwa Ahụ Na Google Playstore
Ihe nile ichoro iji nwee ihe ịga nke ọma na JAMB, WAEC & NECO.
