Safe Working Practices (Materials option)
Gbogbo ọrọ náà
A workshop is full of tools and machines that cut, spin, heat and throw off dust and sparks, and they do not distinguish between waste material and a careless hand. Safe working practices are the habits and equipment that let you make things accurately without harming yourself or others. They are not an add-on to practical work; they are part of being a competent maker, and in 0445 they are assessed alongside the making itself.
This note covers safe working across the workshop: the safe use of hand tools, power tools, machinery and CAM equipment; the role of guards, clamps and emergency stops; and the selection and correct use of personal protective equipment (PPE) such as eye protection, dust masks, ear defenders, aprons and gloves. It explains not just what the rules are but why each one exists, so you can judge the right precaution for an unfamiliar task.
Ebumnobi
- demonstrate safe use of hand tools, power tools, machinery and/or computer-aided manufacture (CAM) equipment
- select and use appropriate PPE (Personal Protective Equipment) when working practically.
Nkuzi Olu
Gee ntị na nkuzi a na ngwa
Maapụ uche
E seela isiokwu a ka ị hụ otu echiche si ejikọta.
Mepee maapụ uche na ngwa
Kaadị ncheta
Omume ncheta ngwa ngwa n'ihe a na-anwale n'isiokwu a.
Mee omume kaadị ndị a na ngwa
Akwụkwọ Ọmụmụ
Ndetu Nkuzi Zuru Ezu di na Ngwa Green Bridge
Nweta ngwa Green Bridge CBT na ekwenti gi ma o bu kompiuta maka ulo akwukwo IGCSE zuru oke: akwukwo ule ndi gara aga, usoro nyocha, eserese uche, kaadi omumu na nkuzi olu.
Nnyocha Ọmụmụ
Ekele diri gi maka imecha ihe karịrị na Safe Working Practices (Materials option). Ugbu a na ị na-enyochakwa isi echiche na echiche ndị dị mkpa, ọ bụ oge iji nwalee ihe ị ma. Ngwa a na-enye ụdị ajụjụ ọmụmụ dị iche iche emebere iji kwado nghọta gị wee nyere gị aka ịmata otú ị ghọtara ihe ndị a kụziri.
Ị ga-ahụ ngwakọta nke ụdị ajụjụ dị iche iche, gụnyere ajụjụ chọrọ ịhọrọ otu n’ime ọtụtụ azịza, ajụjụ chọrọ mkpirisi azịza, na ajụjụ ede ede. A na-arụpụta ajụjụ ọ bụla nke ọma iji nwalee akụkụ dị iche iche nke ihe ọmụma gị na nkà nke ịtụgharị uche.
Jiri akụkụ a nke nyocha ka ohere iji kụziere ihe ị matara banyere isiokwu ahụ ma chọpụta ebe ọ bụla ị nwere ike ịchọ ọmụmụ ihe ọzọ. Ekwela ka nsogbu ọ bụla ị na-eche ihu mee ka ị daa mba; kama, lee ha anya dị ka ohere maka ịzụlite onwe gị na imeziwanye.
- Why should gloves not be worn when using a pillar drill or lathe? A. Gloves make the hands too warm B. The rotating tool can catch the glove and pull the hand in C. Gloves are never allowed in any workshop D. They reduce grip on the work Answer: B
- In the safety hierarchy, where does PPE sit? A. It is the first and most important measure B. It replaces the need for guards C. It is the last line of defence after removing and guarding the hazard D. It is only used by machines, not people Answer: C
- Which PPE is most important when sanding MDF? A. Ear defenders only B. A dust mask or respirator, because MDF produces fine harmful dust C. Leather gloves D. No PPE is needed for sanding Answer: B
- Why must PVC never be cut on a laser cutter? A. It melts too slowly B. It releases toxic, corrosive fumes when laser cut C. It reflects the laser harmlessly D. It is too thick for any laser Answer: B
- What is the safest way to hold a small piece of metal while drilling it? A. Grip it firmly by hand B. Rest it loosely on the table C. Clamp it securely so it cannot spin D. Hold it with a glove Answer: C
Rue ajuju ndi a n'ime ngwa ahu
Rue ajuju ndi a n'ime ngwa ahu
Akwụkwọ A Na-atụ Aro
Meecha Ajụjụ Ule Ọmarịcha
Ị chọrọ ime ajụjụ ule ọmarịcha gbasara Safe Working Practices (Materials option)? Budata ngwa Green Bridge CBT iji nweta ajụjụ ule ọmarịcha na nyocha zuru ezu gbasara isiokwu a.
Budata Ngwa Ahụ Na Google Playstore
Ihe nile ichoro iji nwee ihe ịga nke ọma na JAMB, WAEC & NECO.
