JAMB UTME - Chemistry - 1989
Ajụjụ 1 Ripọtì
Use the figure above to answer this question. Which of the following compounds is an isomer of the compound
Ajụjụ 2 Ripọtì
Three liquids X, Y and Z containing only hydrogen and carbon were burnt on a spoon. X and Y burnt with sooty flames while Z did not. Y is able to discharge the colour of bromine water whereas X and Z cannot. Which of the liquids would be aromatic in nature?
Akọwa Nkọwa
The liquids X and Y burning with sooty flames indicate that they contain carbon atoms, while Z not burning with sooty flames indicate that it does not contain carbon. Y being able to discharge the color of bromine water suggests that it contains a double bond, which means it is unsaturated. Therefore, only Y is unsaturated and contains a double bond, which makes it aromatic in nature. X and Z are both saturated and do not contain any double bonds, so they are not aromatic. Thus, the answer is Y.
Ajụjụ 3 Ripọtì
An element, Z froms an anion whose formula is [Z(CN)6]y. If Z has an oxidation number of +2, what is the value of y?
Ajụjụ 4 Ripọtì
When excess chlorine is mixed with ethene at room temperature, the product is
Akọwa Nkọwa
When excess chlorine is mixed with ethene at room temperature, the product is 1,2-dichloroethane. The reaction between ethene and excess chlorine is an example of an addition reaction. In this reaction, the double bond in ethene is broken, and chlorine atoms add to the carbon atoms to form a new molecule. The product formed in this reaction depends on the conditions under which the reaction occurs. When excess chlorine is mixed with ethene at room temperature, the reaction proceeds in a stepwise manner to form 1,2-dichloroethane as the major product. The first chlorine atom adds to one of the carbon atoms in ethene, and the second chlorine atom adds to the adjacent carbon atom, forming a molecule with two chlorine atoms attached to adjacent carbon atoms, which is 1,2-dichloroethane. Therefore, the product formed when excess chlorine is mixed with ethene at room temperature is 1,2-dichloroethane.
Ajụjụ 5 Ripọtì
Bleaching powder, CaOCI2, H2O, deteriorates on exposure to air because
Ajụjụ 6 Ripọtì
The atomic radius of Li, Na and K are 1: 33A, 1. 54A and 1. 96A res pectively. Which of the following explaqins this gradation in atomic radius?
Akọwa Nkọwa
The correct answer is "the number of the electron shells increases from Li to Na to K." This is because the atomic radius is determined by the number of electron shells an atom has. As you move down a group in the periodic table, the number of electron shells increases, resulting in a larger atomic radius. Since Li has the smallest atomic radius, it must have the fewest electron shells, while K has the largest atomic radius, meaning it has the most electron shells. Therefore, the correct explanation for the gradation in atomic radius from Li to Na to K is that the number of electron shells increases from Li to Na to K.
Ajụjụ 9 Ripọtì
What is discharged at the cathode during the electrolysis of copper (ll) tetraoxosulphate (VI) solution?
Akọwa Nkọwa
During the electrolysis of copper (II) tetraoxosulphate (VI) solution, copper ions (Cu2+) are discharged at the cathode. This is because copper ions have a positive charge and are attracted to the negative electrode (cathode) during electrolysis. Hydrogen ions (H+) are discharged at the cathode only if there are no other positively charged ions present in the solution. In this case, there are Cu2+ ions present which have a higher affinity for the cathode than H+ ions. Sulphate ions (SO42-) are not discharged at the cathode as they have a negative charge and are attracted to the positive electrode (anode) during electrolysis. Therefore, option A, "Cu2+ only," is the correct answer.
Ajụjụ 10 Ripọtì
Four elements P,Q, R and S have atomic numbers of 4, 10, 12 and 14 respectively . Which of these electrons is a noble gas?
Akọwa Nkọwa
A noble gas is an element with a complete outermost electron shell. The outermost shell of an atom can contain up to 8 electrons. The atomic number of P is 4, which means it has 4 electrons. The electron configuration of P is 1s2 2s2, which indicates that it has two electrons in the first shell and two electrons in the second shell. Since the outermost shell is not complete, P is not a noble gas. The atomic number of Q is 10, which means it has 10 electrons. The electron configuration of Q is 1s2 2s2 2p6, which indicates that it has two electrons in the first shell, two electrons in the second shell, and six electrons in the third shell. Since the outermost shell of Q is complete with 8 electrons, Q is a noble gas (specifically, it is neon). The atomic number of R is 12, which means it has 12 electrons. The electron configuration of R is 1s2 2s2 2p6 3s2 3p6, which indicates that it has two electrons in the first shell, two electrons in the second shell, six electrons in the third shell, and two electrons in the fourth shell. Since the outermost shell of R is not complete, R is not a noble gas. The atomic number of S is 14, which means it has 14 electrons. The electron configuration of S is 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p2, which indicates that it has two electrons in the first shell, two electrons in the second shell, six electrons in the third shell, ten electrons in the fourth shell, and two electrons in the fifth shell. Since the outermost shell of S is not complete, S is not a noble gas. Therefore, the answer is (B) Q, which is neon and has a complete outermost electron shell.
Ajụjụ 11 Ripọtì
Which of the following reactions is (are) feasible?
I Br(1) + 2CI2(aq) 2Br(aq) + CI2(g)
Ll 21(aq) + Br2(1) 2Br(aq) + 12(s)
Lll 2F(aq) + CI2(g) 2CI(aq) + F2(g)
IV 2F(aq) + Br2(1) 2Br(aq) + F2(g)
Ajụjụ 12 Ripọtì
What is the partial pressure of hydrogen gas collected over water at standard atmospheric pressure and 25oC if the saturation vapour pressure of water at saturation vapour pressure of water is 23 mm Hg at that temperature?
Akọwa Nkọwa
When a gas is collected over water, some of the water vapor in the air above the liquid will dissolve into the water, causing the total pressure above the liquid to be higher than the pressure of the gas alone. This additional pressure is called the vapor pressure or saturation pressure of the water and depends on the temperature. At standard atmospheric pressure and 25°C, the saturation vapor pressure of water is 23 mmHg. Therefore, if we collect hydrogen gas over water at this temperature and pressure, the total pressure will be the sum of the partial pressure of the hydrogen gas and the vapor pressure of water, which is 23 mmHg. To determine the partial pressure of the hydrogen gas alone, we can use Dalton's law of partial pressures, which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of the individual gases. In this case, we know that the total pressure is the standard atmospheric pressure, which is approximately 760 mmHg. So, the partial pressure of the hydrogen gas can be calculated as follows: Partial pressure of hydrogen gas = Total pressure - Vapor pressure of water Partial pressure of hydrogen gas = 760 mmHg - 23 mmHg Partial pressure of hydrogen gas = 737 mmHg Therefore, the correct answer is 737 mmHg.
Ajụjụ 13 Ripọtì
Which of the following would support the conclusion that a solid sample is a mixture?
Akọwa Nkọwa
The property that would support the conclusion that a solid sample is a mixture is the melting range. If the solid has a melting range, it means that it is composed of two or more substances with different melting points. A pure substance always has a specific melting point, so if the solid has a range of melting points, it must be a mixture of different substances. The other properties do not necessarily indicate that a solid is a mixture. For example, the fact that a solid can be ground to a fine powder only suggests that it is a physical property of the substance. The density of a solid also cannot be used to determine if it is a mixture or not. Likewise, the ability of a solid to absorb moisture from the atmosphere does not necessarily indicate that it is a mixture, as many pure substances are hygroscopic and can absorb moisture from the air. Therefore, the correct answer is the third option: the solid has a melting range of 300oC to 375oC, as this indicates that the solid is not a pure substance, but rather a mixture of substances with different melting points.
Ajụjụ 14 Ripọtì
The gas responsible for most of the fatal explosions in coal mines is
Akọwa Nkọwa
The gas responsible for most of the fatal explosions in coal mines is methane. Methane is a highly flammable gas that can be found in coal mines. Methane is produced during the geological formation of coal and is often found in pockets within coal seams. When methane gas mixes with air and reaches a certain concentration, it becomes highly explosive. This is why it is important to monitor methane levels in coal mines and take appropriate safety measures to prevent explosions.
Ajụjụ 15 Ripọtì
An acid and its conjugate base
Ajụjụ 16 Ripọtì
If in the graph above 1 dm3 of a saturated solution of KCL is cooled from 80oC, the mass of crystals deposited will be [K = 39, Cl = 35.5]
Ajụjụ 17 Ripọtì
How many valence electrons are contained in the element represented 3115P?
Akọwa Nkọwa
The element represented by "31P15" is phosphorus (P), which has 15 electrons in total. To determine the number of valence electrons, which are the outermost electrons involved in chemical bonding, we look at the element's position on the periodic table. Phosphorus is in Group 15, so it has 5 valence electrons. This is because the number of valence electrons in elements in a particular group is equal to the group number. Therefore, phosphorus has 5 valence electrons.
Ajụjụ 18 Ripọtì
Gunpower is made from charcoal, sulphur and potassium trioxonitrate (V) The salt in the mixture performs the function of
Akọwa Nkọwa
The salt in the gunpowder mixture performs the function of an oxidant. An oxidant is a substance that accepts electrons from another substance, causing the oxidation of the other substance. In gunpowder, the potassium trioxonitrate (V) is the oxidant that reacts with the charcoal and sulfur to produce a large amount of heat and gas, which propels the bullet out of the gun. The potassium trioxonitrate (V) provides the necessary oxygen for the combustion reaction to occur, making it a crucial component of the gunpowder mixture.
Ajụjụ 19 Ripọtì
The molar ratio of carbon to hydrogen of a volatile liquid compound is 1: 2. 0. 12 g of the liquid on evaporation at s.t.p. gave 32 cm3 of vapour. The molecular formula of the liquid is
[G.M.V =22.4 dm 3, C = 12, H = 1]
Ajụjụ 20 Ripọtì
The scale of a chemical balance is made of iron plate and coated with copper electrolytically because
Akọwa Nkọwa
The reason why the scale of a chemical balance is made of an iron plate and coated with copper electrolytically is that copper is less susceptible to corrosion than iron. When iron is exposed to air and moisture, it reacts with oxygen and forms iron oxide, which is commonly known as rust. Rust can weaken and damage the iron, which can ultimately affect the accuracy of the balance. Copper, on the other hand, is more resistant to corrosion and therefore is a better choice for coating the iron plate of the scale. This ensures that the scale remains accurate and can be used for a longer period of time.
Ajụjụ 21 Ripọtì
Mortar is NOT used for under-water construction because
Ajụjụ 22 Ripọtì
Calcium hydroxide is added in the treatment of town water supply to
Akọwa Nkọwa
Calcium hydroxide is added to town water supply in order to facilitate coagulation of organic particles. Coagulation is the process of clumping together of small particles into larger particles, which can then be removed from the water through sedimentation. The addition of calcium hydroxide raises the pH of the water, which helps the coagulation process by making the particles more attracted to each other. This helps to remove impurities from the water, making it cleaner and safer to drink. It does not directly kill bacteria in the water or improve the taste of the water.
Ajụjụ 23 Ripọtì
The above graph shows a typical heating curve from the solid phase through the liquid phase to the gaseous phase of a substance. Which part of the curve shows solid and liquid in equilibrium?
Ajụjụ 24 Ripọtì
Vulcanization of rubber is a process by which
Akọwa Nkọwa
Vulcanization of rubber is a process by which sulphur is chemically combined in the rubber to make it more durable and less sticky. The process involves heating natural rubber with sulphur or other curatives, such as peroxides, under high pressure. The sulphur reacts with the rubber molecules to form cross-links, which improve the rubber's strength, elasticity, and resistance to heat, chemicals, and abrasion. This process was discovered by Charles Goodyear in the 19th century and revolutionized the rubber industry by making it possible to produce a wide range of rubber products for various applications.
Ajụjụ 25 Ripọtì
Use the figure above to answer this question. Which of the following is NOT a monomer?
Akọwa Nkọwa
Ajụjụ 26 Ripọtì
The products of the thermal decomposition of ammonium trioxonitrate (V) are
Ajụjụ 27 Ripọtì
Which of the following is NOT involved in the extraction of metals from their ores?
Akọwa Nkọwa
The process of extracting metals from their ores involves various methods, including reduction with carbon, reduction with other metals, reduction by electrolysis, and oxidation with oxidizing agents. We need to identify the option that is NOT involved in the extraction of metals from their ores. "oxidation with oxidizing agents" is NOT involved in the extraction of metals from their ores. This is because oxidation is the opposite of reduction, and the extraction of metals from their ores involves reducing the metal ions to the elemental form. In other words, during the extraction of metals, reducing agents are used to reduce the metal ions to their elemental form, whereas oxidizing agents are used to oxidize the metal ions to a higher oxidation state. Thus, the correct answer is "oxidation with oxidizing agents" is NOT involved in the extraction of metals from their ores. Note: The choice of extraction method depends on the reactivity of the metal and the cost of the extraction process.
Ajụjụ 28 Ripọtì
The reaction between ethanoic acid and sodium hydroxide is an example of
Akọwa Nkọwa
The reaction between ethanoic acid and sodium hydroxide is an example of neutralization. Neutralization is a chemical reaction between an acid and a base, producing a salt and water. In this reaction, ethanoic acid (an acid) reacts with sodium hydroxide (a base) to produce sodium ethanoate (a salt) and water. The reaction is as follows: CH3COOH (ethanoic acid) + NaOH (sodium hydroxide) → CH3COONa (sodium ethanoate) + H2O (water) The reaction is called neutralization because the acid and base neutralize each other's acidic and basic properties.
Ajụjụ 29 Ripọtì
The alkaline hydrolysis of fats and oils produces soap and
Akọwa Nkọwa
The alkaline hydrolysis of fats and oils produces soap and propane - 1,2,3 - triol. When fats or oils are reacted with an alkali (such as sodium hydroxide), they undergo saponification, a process which breaks down the ester bonds in the fat or oil to produce soap and glycerol. Glycerol, also known as propane-1,2,3-triol, is a trihydroxy alcohol that has three hydroxyl (-OH) groups attached to a propane chain. Therefore, the correct answer is "propane - 1,2,3 - triol".
Ajụjụ 30 Ripọtì
Elements X and Y have electronic configurations 1s22s22p6 and 1s22s22p63s23p1 respectively. When they combine, the formula of the compound formed is
Akọwa Nkọwa
Element X1s22s21p4
Valency of X is 2
Element Y1s22s22p63s23P1
valency of Y is 3
There is an exchange of valency when a compound is being formed. Hence, we have Y2X3
Ajụjụ 31 Ripọtì
20.00 cm 3 of a solution containing 0.53 g of anhydrous Na2CO3 in 100 cm3 requires 25.00 cm3 of H2SO4 for complete neutralisation. The concentration of the acid solution in moles per dm is [H =1, C = 12, O = 16, Na =23, S = 32]
Ajụjụ 32 Ripọtì
A hydrated salt of formula MSO4.xH2 O CONTAINS 45.3% by mass of water of crystalisation. Calculate the value of x [M = 56, S = 32, O = 16, H = 1 ]
Ajụjụ 33 Ripọtì
The substance ZnO dissolves in sodium hydroxide solution and mineral acid solution to give soluble products in each case. ZnO is therefore referred to as
Akọwa Nkọwa
ZnO is referred to as an amphoteric oxide. This means that it can react as both an acid and a base. ZnO dissolves in both sodium hydroxide solution (a strong base) and mineral acid solution (a strong acid) to give soluble products. When ZnO reacts with sodium hydroxide, it acts as an acid and forms a soluble salt. When it reacts with a mineral acid, it acts as a base and forms a soluble salt. Therefore, ZnO can react with both acids and bases, making it an amphoteric oxide.
Ajụjụ 34 Ripọtì
\(\mathrm{CO}_{g} + \mathrm{H_2O}_{g} \rightarrow 2_{g} + \mathrm{H_2}_{g}\ \Delta H = -4100\text{J}\). Which of the following factors favour the formation of hydrogen in the above reaction? i. high pressure. ii. low pressure iii. high temperature iv. use of excess steam
Ajụjụ 35 Ripọtì
The bond which joins two ethanoic acid molecules in the liquid state is
Ajụjụ 36 Ripọtì
The above diagram gives the potential energy profile of the catalyst and uncatalysed reactions of X(g) + Y(g) → XY(g). Deduce the respective activation energies in KJ of the catalysed and uncatalysed reverse reactions: XY(g) → X(g) + Y(g)
Akọwa Nkọwa
The activation energy is the minimum energy required for a chemical reaction to occur. In the given diagram, the activation energy for the uncatalyzed reaction is the difference between the energy of the reactants and the maximum point on the curve representing the transition state. Similarly, the activation energy for the catalyzed reaction is the difference between the energy of the reactants and the maximum point on the curve representing the transition state in the presence of the catalyst. From the diagram, the activation energy for the uncatalysed reaction is 500 kJ (difference between the energy of the reactants and the maximum point on the curve representing the transition state for the uncatalysed reaction). The activation energy for the catalysed reaction is 300 kJ (difference between the energy of the reactants and the maximum point on the curve representing the transition state in the presence of the catalyst). Therefore, the activation energy for the uncatalysed reverse reaction (XY(g) → X(g) + Y(g)) would also be 500 kJ (same as the uncatalysed forward reaction). Similarly, the activation energy for the catalysed reverse reaction (XY(g) → X(g) + Y(g)) would also be 300 kJ (same as the catalysed forward reaction). So, the respective activation energies in kJ of the catalysed and uncatalysed reverse reactions are 300 and 500 kJ respectively.
Ajụjụ 37 Ripọtì
In the above set up substances X and Y are respectively
Ajụjụ 38 Ripọtì
The minimum volume of oxygen required for the complete combustion of a mixture of 10cm 3 of CO and 15 cm 3 of H 2 is
Ajụjụ 39 Ripọtì
Which of the curves in the above graph illustrates the behaviour of an ideal gas?
Ajụjụ 40 Ripọtì
The catalyst used in the contact process for the manufacture of tetraoxosulphate (VI) acid is
Akọwa Nkọwa
The catalyst used in the contact process for the manufacture of tetraoxosulphate (VI) acid is "vanadium (V) oxide." The contact process is the industrial method for the production of sulfuric acid. In this process, sulfur dioxide is converted to sulfur trioxide, which is then used to produce sulfuric acid. Vanadium (V) oxide acts as a catalyst in the conversion of sulfur dioxide to sulfur trioxide. It speeds up the reaction rate by providing an alternate pathway for the reaction that has a lower activation energy.
Ajụjụ 41 Ripọtì
The same current is passed for the same time through solutions of AgNO3 and CuSO4 connected in series. How much silver will be deposited if 1.0 g of copper is produced?
[Cu = 63.5, S = 32, O = 16, Ag = 108, N = 14]
Akọwa Nkọwa
From Faraday;s second law of electrolysis
Mass of silver depositedMass of copper deposited = Equivalent mass of silverEquivalent mass of copper
Mass of silver deposited1.0g = 10863.5
= 31.75g
Copper is devalent = Cu2+
Mass of silver deposited = 108g31.75g
= 3.30g
Ajụjụ 42 Ripọtì
The gaseous pollutant sulphur (IV)oxide is most likely to be detected in fairly reasonable quantities in the area around a plant for the
Ajụjụ 43 Ripọtì
A solution of calcium bromide contains 20 g dm 3 What is the molarity of the solution with respect to calcium bromide and bromide ions? [Ca = 40, Br = 80]
Ajụjụ 44 Ripọtì
A metal is extracted from its ore by the electrolysis of its molten chloride and it displaces lead from lead (ll) trioxonitrate (V) solution. The metal is
Akọwa Nkọwa
Ajụjụ 45 Ripọtì
What is the IUPAC name for the compound?
Ajụjụ 46 Ripọtì
It can be deduced from the vapour pressure curves above that
Akọwa Nkọwa
The vapor pressure curves show the relationship between the boiling points and the vapor pressures of different liquids. The boiling point of a liquid is the temperature at which its vapor pressure is equal to atmospheric pressure. From the given vapor pressure curves, we can deduce that the liquid with the highest boiling point will have the lowest vapor pressure at a given temperature. Conversely, the liquid with the lowest boiling point will have the highest vapor pressure at a given temperature. Therefore, we can deduce that liquid I has the lowest boiling point since it has the highest vapor pressure at a given temperature. On the other hand, liquid III has the highest boiling point since it has the lowest vapor pressure at a given temperature. So, the correct answer is "liquid lll has the highest boiling point."
Ajụjụ 47 Ripọtì
The combustion of ethene, \( \mathrm{C_2H_4} \), is given by the equation \( \mathrm{C_2H_4 + 3O_2 \rightarrow 2CO_2 + 2H_2O} \); ∆H = - 1428 KJ. If the molar heats of formation of water and carbon (IV) oxide are - 286 kJ and - 396 kJ respectively, calculate the molar heat of formation of ethene in KJ
Akọwa Nkọwa
Ajụjụ 48 Ripọtì
The atomic number of caesium is 55 and its atomic mass is 133. The nucleus of caesium atom therefore contains
Akọwa Nkọwa
The atomic number of an element represents the number of protons in the nucleus of an atom of that element. In this case, the atomic number of caesium is 55, which means that its nucleus contains 55 protons. The atomic mass of an element is the sum of the number of protons and neutrons in the nucleus of an atom of that element. The atomic mass of caesium is 133, which means that its nucleus contains 78 neutrons (133 - 55 = 78). Therefore, the correct option is "55 protons and 78 neutrons".
Ajụjụ 49 Ripọtì
Using 50 cm 3 of 1 M potassium hydroxide and 100cm 3 of 1 M tetraoxosulphate (VI) acid, calculate the respective volumes in cm 3 of base and acid that would be required to produce the maximum amount of potassium tetraoxosulphate (IV) [ = 39, S = 32, O = 16, H = 1]
