JAMB UTME - Chemistry - 2022

Akọwa Nkọwa

Akọwa Nkọwa

The compound that is NOT correctly formed when the parent metal is heated in air is: tri-iron tetraoxide (Fe2O). This is because the correct compound formed from the heating of iron in air is iron (III) oxide or Fe2O3. The formula for tri-iron tetraoxide is incorrect, as it implies that there are only three iron atoms in the compound when there should be four.

Akọwa Nkọwa

The addition of charcoal to the filter bed of sand during water treatment for township supply is to remove odors and improve the taste of the water. Charcoal is a porous material that can adsorb impurities and chemicals from the water, such as dissolved organic matter that can contribute to unpleasant tastes and odors. This process helps to produce a better-quality drinking water that is free from unpleasant tastes and odors. It should be noted that while the addition of charcoal can help remove impurities, it does not kill germs or prevent tooth decay or goiter. Other water treatment methods, such as disinfection with chlorine or ultraviolet light, are required to kill harmful microorganisms and ensure the safety of the drinking water.

Akọwa Nkọwa

Wrought iron is a type of iron that is very malleable and ductile, meaning it can be easily shaped and formed into various objects. It is obtained by heating cast iron in a furnace with haematite, also known as iron(III) oxide. When cast iron is heated with haematite in a furnace, a chemical reaction takes place where the haematite reacts with the carbon in the cast iron to produce carbon dioxide gas. This reaction also produces molten iron, which is then further heated to remove any impurities like sulfur and phosphorus. This molten iron is then poured into molds to form ingots of wrought iron. Therefore, haematite is essential in the process of obtaining wrought iron from cast iron.

Akọwa Nkọwa

Among the given options, only CuS will precipitate in dilute HCl. CuS is insoluble in dilute HCl, and hence it will precipitate when added to dilute HCl. However, the other options will dissolve in dilute HCl, and hence they will not precipitate. ZnS will dissolve in dilute HCl to form ZnCl2 and H2S. Na2S will react with dilute HCl to produce H2S and NaCl. FeS will dissolve in dilute HCl to form FeCl2 and H2S. Therefore, the correct answer is (4) CuS.

Akọwa Nkọwa

Akọwa Nkọwa

The most suitable catalyst for the given reaction is vanadium(V)oxide (V2O5). Vanadium(V)oxide is a commonly used catalyst for the oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3). The reaction is an exothermic reaction, and it occurs at high temperatures (around 450-500°C) in the presence of a catalyst. V2O5 is an effective catalyst for this reaction because it has a high surface area and can provide active sites for the reaction to occur. The vanadium ions in the V2O5 catalyst undergo redox reactions with the sulfur dioxide and oxygen molecules, which promotes the formation of sulfur trioxide. Chromium(VI)oxide and iron(III)oxide are not suitable catalysts for this reaction because they are not effective at promoting the oxidation of sulfur dioxide to sulfur trioxide. Copper(I)oxide can be used as a catalyst for the reaction, but it is not as effective as vanadium(V)oxide.

Akọwa Nkọwa

The correct answer is: "melting does not break the metallic bond but boiling does." The metallic bond is the force of attraction between metal atoms, which holds them together to form a solid. When a metal is heated, its temperature increases, and at a certain point, the energy provided by the heat is enough to overcome the metallic bond and cause the metal to melt. However, even in the liquid state, the metallic bond remains intact, which is why metals have a very high melting point. On the other hand, when the temperature is further increased, the energy provided by the heat becomes enough to break the metallic bond, and the metal atoms become completely detached from one another. This results in the metal boiling and turning into a gas. Because the metallic bond is much stronger than other types of intermolecular forces, such as van der Waals forces, it requires a lot of energy to break, resulting in a large temperature interval between the melting point and boiling point of metal.

Akọwa Nkọwa

Mixing aqueous solutions of barium hydroxide and sodium tetraoxocarbonate (IV) would result in a chemical reaction that produces a white precipitate of barium tetraoxocarbonate (IV). The balanced chemical equation for this reaction is: Ba(OH)2(aq) + Na2CO3(aq) → BaCO3(s) + 2NaOH(aq) In the above equation, the barium hydroxide (Ba(OH)2) reacts with sodium tetraoxocarbonate (IV) (Na2CO3) to form barium tetraoxocarbonate (IV) (BaCO3), which is a white precipitate, and sodium hydroxide (NaOH). Therefore, the correct option is 4) Barium tetraoxocarbonate.

Akọwa Nkọwa

The organic compound with a fishy smell is most likely to have the general formula RNH2, which represents a primary amine. Amines are organic compounds that contain a nitrogen atom bonded to one or more carbon atoms. Primary amines have one alkyl or aryl group and two hydrogen atoms bonded to the nitrogen atom. Some primary amines have a fishy smell, which is caused by the presence of volatile amines. These amines are small molecules that can easily evaporate and have a strong odor, similar to that of fish. Examples of compounds that have a fishy smell include trimethylamine, which is found in fish, and butylamine, which is used in the production of rubber and pharmaceuticals. In summary, the organic compound with a fishy smell is likely to have the general formula RNH2, which represents a primary amine.

Akọwa Nkọwa

The organic functional group that can likely decolorize ammoniacal silver nitrate is an alkyne. When ammoniacal silver nitrate is added to a solution containing an alkyne functional group, a white or yellowish precipitate of silver acetylide is formed. Silver acetylide is a highly explosive compound and is sparingly soluble in water, causing it to appear as a white or yellowish solid precipitate. This reaction is used as a test to detect the presence of an alkyne functional group in an organic compound. In contrast, alkanes, alkenes, and alkanols do not react with ammoniacal silver nitrate, so they cannot decolorize it. Therefore, an organic functional group that can likely decolorize ammoniacal silver nitrate is an alkyne.

Akọwa Nkọwa

Akọwa Nkọwa

The pollutant that is usually present in a city that generates its electricity from coal is sulfur dioxide (SO2), also known as sulfur(iv)oxide. When coal is burned to generate electricity, sulfur compounds in the coal are released into the air as SO2. This gas can react with other pollutants and atmospheric conditions to form smog, which can be harmful to human health and the environment. Therefore, it is important to reduce the use of coal in electricity generation and promote cleaner and more sustainable energy sources to reduce the levels of SO2 and other harmful pollutants in the air.

Akọwa Nkọwa

The IUPAC name for CICH2-CH2-CH2-OH is 3-chloropropan-1-ol. To name the compound using the IUPAC nomenclature system, we start by identifying the longest continuous chain of carbon atoms that contains the functional group (-OH). In this case, the longest chain contains three carbon atoms, so the root name is propane. Next, we identify the position of the substituent (-Cl) on the chain. The substituent is attached to the third carbon atom in the chain, so the name of the compound becomes 3-chloropropane. Finally, we add the suffix -ol to indicate that the compound contains an alcohol functional group (-OH), so the complete name of the compound is 3-chloropropan-1-ol. Therefore, the correct answer is 3-chloropropan-1-ol.

Akọwa Nkọwa

The statement that is TRUE of the complete hydrolysis of a glyceride by sodium hydroxide is: - 3 moles of NaOH are required for each mole of glyceride. During the hydrolysis of a glyceride (a triglyceride), the ester bonds between the fatty acid chains and glycerol are broken by the action of a strong base like sodium hydroxide. This results in the formation of glycerol and the corresponding salts of fatty acids, which are commonly known as "soaps." The reaction can be represented by the following equation: Triglyceride + 3 NaOH → 3 soap + glycerol As per the equation, 3 moles of NaOH are required to hydrolyze one mole of glyceride, and 3 moles of soap and one mole of glycerol are produced. The use of concentrated sulfuric acid (H2SO4) is not essential for the completion of the reaction, but it can be used as a catalyst to speed up the reaction.

Akọwa Nkọwa

The degree of disorder of the system increases as boiling water changes to steam. When water is boiled and changes to steam, the water molecules gain energy and become more disordered, which means that the molecules move more rapidly and the entropy of the system increases. The temperature of the system also increases during this process, but the degree of disorder is the factor that specifically increases as the water changes to steam. The number of molecules and activation energy remain constant during this phase transition.

Akọwa Nkọwa

An acidic oxide is an oxide that reacts with water to form an acidic solution. Non-metals have a greater tendency to form acidic oxides than metals. Therefore, among the given options, the non-metal that does not form an acidic oxide with oxygen would be the one that does not react with water to form an acidic solution. Out of the given options, chlorine is the non-metal that does not form acidic oxides with oxygen. Chlorine reacts with oxygen to form a number of oxides such as chlorine monoxide (Cl2O), chlorine dioxide (ClO2), and chlorine trioxide (ClO3), but none of these oxides react with water to form an acidic solution. Instead, they react with water to form oxyacids or oxoacids such as hypochlorous acid (HClO), chlorous acid (HClO2), and chloric acid (HClO3), which are stronger acids than the oxides. Therefore, the correct answer is chlorine.

Akọwa Nkọwa

Akọwa Nkọwa

Hard water is water that contains high amounts of dissolved minerals, specifically calcium and magnesium ions. These minerals come from the rocks and soil that the water flows through and can accumulate in the water as it travels to your home. When you use hard water, it can leave mineral deposits on your pipes, fixtures, and appliances, which can reduce their efficiency and lifespan. It can also make soap less effective and leave your skin feeling dry and itchy. Therefore, it is important to treat hard water if it is a problem in your area.

Akọwa Nkọwa

Akọwa Nkọwa

The liquid is most likely to be option number 4: CH3OHCHOH2OH, which is also known as glycerol or glycerin. Glycerol has a high boiling point of 290°C, which is much higher than the boiling points of the other options. It is also a viscous liquid, which means it is thick and sticky. Glycerol is non-toxic, and it is often used in food, pharmaceuticals, and cosmetics. Furthermore, glycerol is miscible with water, which means that it can be easily mixed with water to form a homogeneous solution. It is also hygroscopic, which means that it can absorb water from the air. These properties make glycerol a useful substance in many applications, such as as a moisturizer in skincare products or as a humectant in food processing.

Akọwa Nkọwa

Akọwa Nkọwa

The balanced chemical equation shows that 2 moles of hydrogen gas react with 1 mole of oxygen gas to produce 2 moles of water vapor. Therefore, the stoichiometric ratio of hydrogen to oxygen is 2:1. In this problem, there are 50cm3 of hydrogen gas and 75cm3 of oxygen gas. Since the gases are at the same temperature and pressure, their volumes are directly proportional to the number of moles of gas present. Using the stoichiometric ratio, we can calculate that the amount of oxygen gas required to react completely with 50cm3 of hydrogen gas is (1/2) * 50cm3 = 25cm3. Since there are 75cm3 of oxygen gas present, there must be (75cm3 - 25cm3) = 50cm3 of unreacted oxygen gas remaining. Therefore, the volume of unreacted oxygen gas is 50cm3. Answer: 50cm3

Akọwa Nkọwa

The method employed in the preparation of salts will depend on the composition of the salt. Different salts have different chemical properties, and the method used to prepare them will depend on these properties. For example, some salts can be easily dissolved in water, while others are not very soluble and may require the use of a different solvent or special conditions to dissolve. The dissociating ability, stability to heat, and precipitating ability of the salt may also play a role in determining the preparation method, but the most important factor is the composition of the salt.

Akọwa Nkọwa

Akọwa Nkọwa

The white solid obtained when marble (calcium carbonate, CaCO3) is heated to 1473K is calcium oxide (CaO), also known as quicklime. When quicklime reacts vigorously with water, it forms calcium hydroxide (Ca(OH)2), which is an alkaline solution. Therefore, the solution obtained from the reaction of quicklime with water contains calcium hydroxide (Ca(OH)2).

Akọwa Nkọwa

Out of the given options, K2CO3 is stable to heat.

Akọwa Nkọwa

The substance that is not a homogeneous mixture is flood water. Flood water is typically a mixture of various substances, such as sediment, dirt, debris, and organic matter, that have been carried along by the water. As such, flood water is usually a heterogeneous mixture, meaning that it does not have a uniform composition throughout. In contrast, filtered sea water, soft drinks, and writing ink are all examples of homogeneous mixtures, where the components are evenly distributed and the mixture has a uniform composition throughout.

Akọwa Nkọwa

Akọwa Nkọwa

The active component of baking powder is sodium bicarbonate (NaHCO3). It is responsible for the leavening or rising of baked goods by releasing carbon dioxide gas when it reacts with an acid. Other ingredients in baking powder, such as monocalcium phosphate and sodium aluminum sulfate, provide the acid component for the reaction to occur. Magnesium sulfate (MgSO4) and calcium sulfate (CaSO4) are not typically used in baking powder, and sodium chloride (NaCl) is simply table salt and not an active ingredient in leavening.

Akọwa Nkọwa

The shape of a molecule of CCl4 is tetrahedral.

Akọwa Nkọwa

Carbon dioxide (CO2) has a linear molecular geometry, with two oxygen atoms bonded to the central carbon atom. Each bond between carbon and oxygen is a double bond, consisting of two pairs of electrons shared between the atoms. Therefore, there are two bonding pairs in each of the carbon-oxygen double bonds, giving a total of four bonding pairs in CO2. The answer is 4.

Akọwa Nkọwa

The atomic number of an atom represents the number of protons in the nucleus of the atom. Since the atomic number given is 17, it means that there are 17 protons in the nucleus. The mass number of an atom represents the total number of protons and neutrons present in the nucleus. Therefore, if the mass number is given as 37, it means that the total number of protons and neutrons in the nucleus is 37. To determine the number of neutrons in the nucleus, we can subtract the atomic number (which represents the number of protons) from the mass number (which represents the total number of protons and neutrons). Thus, the number of neutrons in the atom with a mass number of 37 and an atomic number of 17 is: Number of neutrons = Mass number - Atomic number = 37 - 17 = 20 Therefore, the answer is 20.

Akọwa Nkọwa

Akọwa Nkọwa

Akọwa Nkọwa

The addition of sodium chloride to water to form a solution would lead to a decrease in freezing point and an increase in boiling point. This effect is known as colligative properties, which depend on the concentration of solute particles in a solution. When sodium chloride dissolves in water, it breaks down into sodium ions and chloride ions. These ions occupy space between water molecules and interfere with the formation of ice crystals during freezing. As a result, the freezing point of the solution is lowered below that of pure water. This is why we use salt to de-ice roads and sidewalks during the winter season. Similarly, the presence of solute particles in a solution also raises the boiling point of the solution. The increased concentration of solute particles in the solution causes a decrease in the vapor pressure of the solvent (water), making it harder for the solvent molecules to escape into the gas phase. This means that more energy is required to bring the solution to its boiling point compared to pure water. In summary, the addition of sodium chloride to water forms a solution with lower freezing point and higher boiling point compared to pure water.

Akọwa Nkọwa

The compound that exhibits resonance is benzene.

Akọwa Nkọwa

Heavy water (D2O) is used as a moderator to control nuclear fission. A moderator is a substance that is used to slow down the neutrons produced in a nuclear reaction, making them more likely to be captured by the fuel nuclei and causing further fission. Heavy water is a type of water that contains a larger amount of the isotope deuterium (D) than regular water. Deuterium has an extra neutron compared to the more common hydrogen isotope, and this makes heavy water more effective at slowing down neutrons than regular water. Lead, iron, and chromium are not typically used as moderators in nuclear reactors. Lead can be used as a shield to absorb radiation, while iron and chromium are used in the construction of the reactor vessel and other components.

Akọwa Nkọwa

The sulphide commonly used in coating electric fluorescent tubes is Zinc Sulphide. Zinc Sulphide is a type of material that glows when it is exposed to ultraviolet light. When ultraviolet light is generated inside a fluorescent tube, it excites the Zinc Sulphide particles, causing them to emit visible light. This visible light is what we see as the bright light coming from the tube. So, Zinc Sulphide acts as a phosphor and helps in producing the bright light in fluorescent tubes.

Akọwa Nkọwa

The highest equilibrium yield of N2O4 would be produced at low temperature and low pressure. In a chemical reaction, the position of the equilibrium can be influenced by changing the temperature or pressure. A decrease in temperature or an increase in pressure favors the side of the reaction with the fewer moles of gas (in this case, N2O4). This means that, if the temperature is low and the pressure is low, there will be more N2O4 at equilibrium, as the reaction will shift to the right to counteract the reduction in the concentration of N2O4. So, low temperature and low pressure would produce the highest equilibrium yield of N2O4.