Specialist Techniques And Processes
Bayani Gaba-gaba
There are only three things you can do to a material. You can take some away, you can add some on, or you can push what is there into a new shape. Every process in a workshop and every process in a factory is one of those three, and the specification uses exactly those headings: wastage, addition and shaping. Learn them as three families and thirty processes become manageable.
This is the largest topic in the specialist technical principles and it earned three questions on the specimen paper, worth thirteen marks between them. You will learn how to use measurement and reference points, templates, jigs and patterns; the wastage, addition and shaping processes by name and by what each is for; how products are made to a tolerance by manufacturing to minimum and maximum measurements; the application and use of quality control, which the specification defines differently for each material area; and the commercial processes for papers and boards, timbers, metals and polymers. This is specialist technical principles content, examined in Section B of Paper 1.
Manufura
- The use of production aids
- How to use measurement/reference points, templates, jigs, and patterns where suitable
- Tools, equipment and processes
- A range of tools, equipment and processes that can be used to shape, fabricate, construct, and assemble high quality prototypes, as appropriate for the materials being used including: wastage, such as:
- die cutting
- perforation
- turning
- sawing
- milling and routing
- drilling
- cutting and shearing
- addition, such as:
- brazing
- welding
- lamination
- soldering
- 3D printing
- printing
- shaping such as:
- vacuum forming
- creasing
- pressing
- drape forming
- bending
- folding
- blow moulding
- casting
- injection moulding
- extrusion.
- How products are made to a tolerance
- Manufacturing to minimum and maximum measurements.
- The application and use of quality control
- Papers and boards (registration marks).
- Timber based materials (dimensional accuracy using go/ no go fixture).
- Metal based materials (dimensional accuracy using measuring equipment).
- Polymers (dimensional accuracy by selecting correct laser cutting settings).
- Commercial processes
- Papers and boards (offset lithography and die cutting).
- Timber based materials (routing and turning).
- Metal based materials (milling and casting).
- Polymers (injection moulding and extrusion).
Taswirar tunani
An zana wannan batu don ka ga yadda ra'ayoyi ke hadewa.
Bude taswirar tunani a cikin manhaja
Takardar Darasi
Cikakken Bayanin Darasi Yana Kan Manhajar Green Bridge
Sami manhajar Green Bridge CBT a wayarka ko kwamfutarka domin cikakken laburaren IGCSE: takardun jarrabawar baya, tsarin kimantawa, taswirar tunani, katunan karatu da darussan sauti.
Nazarin Darasi
Barka da kammala darasi akan Specialist Techniques And Processes. Yanzu da kuka bincika mahimman raayoyi da raayoyi, lokaci yayi da zaku gwada ilimin ku. Wannan sashe yana ba da ayyuka iri-iri Tambayoyin da aka tsara don ƙarfafa fahimtar ku da kuma taimaka muku auna fahimtar ku game da kayan.
Za ka gamu da haɗe-haɗen nau'ikan tambayoyi, ciki har da tambayoyin zaɓi da yawa, tambayoyin gajeren amsa, da tambayoyin rubutu. Kowace tambaya an ƙirƙira ta da kyau don auna fannoni daban-daban na iliminka da ƙwarewar tunani mai zurfi.
Yi wannan ɓangaren na kimantawa a matsayin wata dama don ƙarfafa fahimtarka kan batun kuma don gano duk wani yanki da kake buƙatar ƙarin karatu. Kada ka yanke ƙauna da duk wani ƙalubale da ka fuskanta; maimakon haka, ka kallesu a matsayin damar haɓaka da ingantawa.
- Which one of the following is an addition process? A. Blow moulding B. Brazing C. Milling D. Shearing Answer: B
- In vacuum forming, the softened sheet is forced onto the mould by A. a hydraulic ram. B. atmospheric pressure. C. the weight of the sheet. D. an injection screw. Answer: B
- A dimension is given as 40 millimetres with a tolerance of plus 0.3 and minus 0.2. What is the total tolerance? A. 0.1 millimetres B. 0.2 millimetres C. 0.3 millimetres D. 0.5 millimetres Answer: D
- Registration marks are used as a quality control method for A. metal based materials. B. papers and boards. C. polymers. D. timber based materials. Answer: B
- Which process produces a continuous length of constant cross section? A. Blow moulding B. Die casting C. Extrusion D. Pressing Answer: C
Yi aikin wadannan tambayoyi a cikin manhaja
Yi aikin wadannan tambayoyi a cikin manhaja
Littattafan da ake ba da shawarar karantawa
Yi Aikin Tambayoyin Gwaji
Kana son yin aikin tambayoyin gwaji kan Specialist Techniques And Processes? Sauke manhajar Green Bridge CBT don samun tambayoyin gwaji da cikakkun jarrabawa akan wannan batu.
Sauke Manhajar Daga Google Playstore
Duk abin da kake buƙata don yin fice a JAMB, WAEC & NECO.
