WAEC SSCE - Physics - 2007 (Objective)
Tambaya 2 Rahoto
A body moving with an initial velocity U accelerates until it attains a velocity of V within a time t. The distance, s covered by the body is given by the expressions
Bayanin Amsa
The equation that relates initial velocity, final velocity, acceleration, time and distance is given by s = ut + 0.5at^2 + \(\frac{1}{2}\) at^2.
We are given that the body is moving with an initial velocity U and attains a final velocity V within time t. Hence, the acceleration of the body can be calculated using the equation: a = (V - U) / t.
Now, substituting the value of acceleration in the above equation, we get:
s = Ut + \(\frac{1}{2}\)(V - U)t = \(\frac{V+U}{2}\)t
Therefore, the expression for the distance, s covered by the body is s = (\(\frac{V+U}{2}\))t. Hence, option (C) is the correct answer.
Tambaya 5 Rahoto
Which of the following observations is not an effect of surface tension?
Bayanin Amsa
The observation that is not an effect of surface tension is "water flowing out more easily than engine oil from a container."
Surface tension is the cohesive force that exists between molecules at the surface of a liquid, which causes the surface to behave like an elastic film. This property of liquids has several effects, such as the formation of droplets, the spherical shape of mercury droplets, and the ability of small insects to walk on the surface of water.
However, the flow rate of a liquid out of a container is not directly related to surface tension. It is primarily determined by the viscosity of the liquid, which is a measure of its resistance to flow. Engine oil is more viscous than water, so it flows more slowly out of a container. This difference in viscosity is why engine oil is thicker and more sluggish than water.
In summary, the rate of flow of a liquid out of a container is determined by its viscosity and not surface tension, which only affects the surface properties of the liquid.
Tambaya 6 Rahoto
Which of the following statements about solid friction are correct? It i. is a force ii. occurs between the surfaces of two bodies in contact iii. depends on the area in contact
Bayanin Amsa
Tambaya 7 Rahoto
Mechanical energy can be either
Bayanin Amsa
Mechanical energy is the energy possessed by an object due to its motion or position. It can be either potential energy or kinetic energy. Potential energy is the energy an object possesses due to its position, shape, or state. Kinetic energy, on the other hand, is the energy an object possesses due to its motion. Therefore, the correct answer is "potential or kinetic."
Tambaya 8 Rahoto
The team rectilinear acceleration means the rate of increase of
Bayanin Amsa
The term "rectilinear acceleration" refers to the rate of change or increase in velocity along a straight-line path in a unit time. It is also known as linear acceleration or simply acceleration. Therefore, the correct option is: velocity along a straight-line path in a unit time.
Tambaya 9 Rahoto
A bulb marked 240V, 40W is used for 30 minutes. Calculate the heat generated
Bayanin Amsa
The formula for calculating electrical energy is given by:
E = P x t
Where E is the energy in joules, P is the power in watts, and t is the time in seconds.
Firstly, we need to convert the time of 30 minutes to seconds.
30 minutes = 30 x 60 seconds = 1800 seconds
The power of the bulb is given as 40W, and the voltage is given as 240V. We can use these values to calculate the current (I) flowing through the bulb:
Power (P) = Voltage (V) x Current (I)
Current (I) = Power (P) / Voltage (V)
Current (I) = 40 / 240 = 0.1667 A (to 4 decimal places)
Now we can use the formula for energy to calculate the heat generated:
E = P x t
E = 40 x 1800
E = 72000 J
Therefore, the answer is 72000J. So, the correct option is 4) 72000J.
Tambaya 10 Rahoto
A cube made of metal of linear expansivity \(\alpha\) is heated through a temperature \(\theta\). If the initial volume of the cube is Vo, the correct expression for the increase in volume of the cube is
Bayanin Amsa
Tambaya 11 Rahoto
An external force of magnitude 100N acts on a particle of mass 0.15kg for 0.03s. Calculate the change in the speed of the particle
Bayanin Amsa
The change in the speed of the particle can be calculated using the formula: Δv = FΔt/m Where Δv is the change in velocity (speed), F is the external force applied, Δt is the time for which the force is applied, and m is the mass of the particle. Substituting the given values, we get: Δv = (100N) x (0.03s) / 0.15kg Δv = 20ms-1 Therefore, the change in the speed of the particle is 20ms-1. This means that the speed of the particle increased by 20 meters per second during the time when the external force was applied.
Tambaya 12 Rahoto
A plane inclined at 30o to the horizontal has an efficiency of 50%. Calculate the force parallel to the plane required to push a load of 120N uniformly upn the plane
Bayanin Amsa
When an object is on an inclined plane, its weight is resolved into two components: one perpendicular to the plane, and the other parallel to the plane. The perpendicular component is counteracted by the normal force of the plane, while the parallel component is responsible for the object's motion along the plane.
Since the plane has an efficiency of 50%, it means that only half of the force parallel to the plane is used to move the object up the plane. The other half is lost due to friction and other factors. Therefore, to calculate the required force parallel to the plane, we need to divide the weight of the load by the efficiency:
force = (load weight / efficiency) * sin(theta)
where theta is the angle of inclination of the plane. Substituting the given values, we get:
force = (120 / 0.5) * sin(30)
force = 240N * 0.5
force = 120N
Therefore, the force required to push the load uniformly up the plane is 120N, which corresponds to.
Tambaya 13 Rahoto
The distance between two points P and Q, along a wave is 0.05m. If the wave length of the wave is 0.10m, determine the phase angle between P and Q in radians
Bayanin Amsa
The phase angle between two points on a wave is given by the fraction of the wavelength between the points, measured in radians.
In this case, the distance between points P and Q is half the wavelength (0.05m is half of 0.10m). Therefore, the phase angle between P and Q is half of the complete wave cycle, which is equal to π radians.
So, the answer is: \(\pi\)
Tambaya 14 Rahoto
The correct sequence of energy transformation in the operation of an x-ray tube is i. X-rays ii. Kinetic energy of thermo electrons iii. Potential energy of the target atoms iv. Heat energy of the emitted electrons
Bayanin Amsa
Tambaya 15 Rahoto
A block of mass 4.0kg causes a spiral spring to extend by 0.16m from its unstretched position. The block is removed and another body of mass 0.50kg is hung from the same spiral spring. If the spring is then stretched and released, what is the angular frequency of the subsequent motion? [g = 10 ms -2]
Tambaya 16 Rahoto
In a nuclear reactor, chain reactions result from the release of
Bayanin Amsa
In a nuclear reactor, chain reactions result from the release of neutrons. A nuclear chain reaction occurs when a neutron collides with a nucleus of a fissile material, such as uranium-235 or plutonium-239, which then splits into two smaller nuclei, releasing energy in the form of heat and more neutrons. These newly released neutrons can then collide with other fissile nuclei, causing them to split and release more neutrons, which continue the chain reaction. This chain reaction is carefully controlled in a nuclear reactor to produce a steady supply of heat that is used to generate electricity.
Tambaya 17 Rahoto
Which of the following components is used for storing electric charges?
Bayanin Amsa
A capacitor is the component used for storing electric charges. A capacitor consists of two conductors separated by an insulator, called a dielectric. When a potential difference is applied across the conductors, electrons accumulate on one conductor and are depleted from the other, resulting in an electric field between the conductors. The insulator prevents the electrons from flowing between the conductors, so the charge is stored on the conductors, effectively storing electric charges. The ability of a capacitor to store charge is measured in farads, and capacitors are commonly used in electronic circuits for a variety of applications, including filtering, timing, and power storage.
Tambaya 18 Rahoto
A rectangular glass prism of thickness d and absolute refractive index n is placed on a point object which is viewed vertically downward from above the prism. Which of the following expressions correctly defines the apparent upward displacement of the object?
Bayanin Amsa
Tambaya 19 Rahoto
Which of the following phenomena is not a direct consequence of rectilinear propagation of light?
Bayanin Amsa
The phenomenon that is not a direct consequence of rectilinear propagation of light is diffraction of light.
Rectilinear propagation of light means that light travels in a straight line in a uniform medium. Lunar and solar eclipses, images of objects in a pinhole camera, and shadows of opaque objects can all be explained by the principle of rectilinear propagation of light.
However, diffraction of light is a bending of light waves around obstacles or through narrow slits, and it cannot be explained by the principle of rectilinear propagation of light. Diffraction is a result of the wave nature of light and occurs when light waves encounter obstacles that are comparable in size to the wavelength of light.
Tambaya 20 Rahoto
When an object is placed at the centre of curvature of a concave mirror, its image is formed at
Bayanin Amsa
When an object is placed at the centre of curvature of a concave mirror, its image is formed at the centre of curvature. The centre of curvature is a point on the principal axis of the mirror, located at a distance equal to the radius of curvature from the mirror's vertex.
When light rays from the object fall on the concave mirror, they reflect and converge at the centre of curvature. This convergence of light rays forms a real, inverted image of the object at the centre of curvature. Since the image is formed by the actual convergence of light rays, it is a real image.
In summary, when an object is placed at the centre of curvature of a concave mirror, its image is formed at the same location, which is the centre of curvature of the mirror.
Tambaya 21 Rahoto
A swinging pendulum between the rest position and its maximum displacement possesses
Bayanin Amsa
A swinging pendulum between the rest position and its maximum displacement possesses both kinetic and potential energy. As the pendulum moves away from its rest position, it gains potential energy due to the increased height above the rest position. As the pendulum swings back towards the rest position, it loses potential energy and gains kinetic energy due to its increased speed. At the rest position, the pendulum has its maximum kinetic energy and minimum potential energy, and at the maximum displacement, it has its maximum potential energy and minimum kinetic energy. Thus, the pendulum continuously converts potential energy to kinetic energy and back again, and possesses both types of energy at any point during its motion.
Tambaya 22 Rahoto
A sounding tuning fork is brought near the open end of a pipe containing air and the loudness of the sound is observed to increase. This observation is due to
Bayanin Amsa
The observed increase in the loudness of the sound when a tuning fork is brought near the open end of a pipe containing air is due to resonance.
Resonance occurs when an object is forced to vibrate at its natural frequency by an external force. In this case, the tuning fork produces sound waves at a specific frequency, which matches the natural frequency of the air column in the pipe. As a result, the air column in the pipe begins to vibrate with greater amplitude, which in turn increases the loudness of the sound.
This phenomenon is similar to how pushing a child on a swing at the right time will cause them to swing higher and higher. In both cases, the external force is applied at just the right frequency to match the natural frequency of the object, resulting in increased amplitude.
Therefore, the correct option is "resonance."
Tambaya 23 Rahoto
Calculate the effective resistance between P and Q in the diagram above
Bayanin Amsa
Tambaya 24 Rahoto
The pressure of a fixed mass of an ideal gas at 27°C is 3 pa. The gas is heated at a constant volume until its pressure is 5 pa. Determine the new temperature of the gas.
Bayanin Amsa
Tambaya 25 Rahoto
A mass of mass m, experiences a viscous drag, F and an upthrust, U as he descends towards the ground at a steady velocity, Using a parachute. If the acceleration of free fall is g, which of the following expressions is correct?
Bayanin Amsa
When an object is descending at a steady velocity, the forces acting on it must be balanced. Therefore, the net force on the object must be zero.
In this case, the forces acting on the mass are the viscous drag force, F, the upthrust force, U, and the force due to gravity, mg.
Using Newton's second law, we know that the net force on an object is equal to its mass times its acceleration. Since the object is descending at a steady velocity, its acceleration is zero, so the net force on the object must also be zero.
Therefore, we can write the following equation:
U + F - mg = 0
This equation shows that the upthrust force and the viscous drag force must balance the force due to gravity in order for the object to descend at a steady velocity with a parachute.
So, the correct expression is: U + F - mg = 0.
Tambaya 26 Rahoto
According to the kinetic theory of gasses, which of the following property of a gas can be affected by the collision of the gas molecule with the walls of the container?
Bayanin Amsa
According to the kinetic theory of gases, the pressure of a gas can be affected by the collision of gas molecules with the walls of the container. As the gas molecules move randomly, they collide with the walls of the container and exert a force on it. This force per unit area is defined as the pressure of the gas. The more frequent and intense the collisions, the higher the pressure. Therefore, the pressure of a gas can be increased or decreased by changing the number of collisions with the walls of the container. The other options listed (temperature, energy, viscosity) are also properties of gases, but they are not directly affected by collisions with the walls of the container.
Tambaya 27 Rahoto
Which of the following statements is correct about resonance? Resonance occurs when a body
Bayanin Amsa
Tambaya 28 Rahoto
The ice and steam point on a mercury-in-glass thermometer are 10cm and 30cm respectively. Calculate the temperature in decree Celsius when the mercury meniscus is the 14cm mark
Bayanin Amsa
We can use the principle of the thermometer, which states that the volume of the liquid (in this case, mercury) in the bulb and stem of the thermometer changes with temperature, and this change in volume is linearly related to the temperature. Therefore, we can set up a proportion: change in volume of mercury / total length of thermometer stem = change in temperature / temperature interval between ice and steam points Let x be the length of the mercury column when the temperature is at the desired point. Then the change in volume of mercury is 14 - 10 = 4 cm. The total length of the stem is 30 - 10 = 20 cm. The temperature interval between ice and steam points is 100oC. Substituting these values into the proportion, we get: 4 cm / 20 cm = change in temperature / 100oC Solving for the change in temperature, we get: change in temperature = (4 cm / 20 cm) * 100oC = 20oC To get the actual temperature at the 14 cm mark, we add the change in temperature to the ice point temperature (which is 0oC): temperature at 14 cm mark = 0oC + 20oC = 20oC Therefore, the answer is 20oC.
Tambaya 29 Rahoto
Which of the following statements distinguishes thermal conduction for convection? i. Conduction requires a material medium while convection does not ii. In convection, there is actual motion of hot material, while in conduction, molecules molecules vibrates faster about their mean positions iii. Conduction takes place in solids while convection takes place in fluids.
Bayanin Amsa
Statement ii and iii distinguish thermal conduction from convection.
Thermal conduction refers to the transfer of heat energy through a medium without any actual motion of the medium itself. In conduction, heat is transferred by the transfer of kinetic energy from one molecule to another through collisions. As a result, in conduction, molecules vibrate faster about their mean positions.
On the other hand, convection is the transfer of heat energy by the actual movement of a fluid. In convection, hotter and less dense fluids rise while cooler and denser fluids sink, creating a circular motion that transfers heat energy from one place to another.
Statement i is incorrect because both conduction and convection require a medium through which heat can be transferred. Statement iii is also incorrect because both thermal conduction and convection can occur in both solids and fluids.
Therefore, the correct answer is ii and iii only.
Tambaya 30 Rahoto
The number of protons in an element increased by one after a radioactive decay. The element must have decay by emitting
Bayanin Amsa
When the number of protons in an element increases by one, it means that a proton has been added to the nucleus of the atom. This can only happen through the emission of a beta particle, which is essentially an electron that is emitted from the nucleus.
During beta decay, a neutron in the nucleus of the atom is converted into a proton and an electron. The proton remains in the nucleus, increasing the atomic number by one, while the electron is emitted from the nucleus as a beta particle. Therefore, if the number of protons in an element increases by one, it must have undergone beta decay by emitting a beta particle.
Alpha decay involves the emission of an alpha particle, which is made up of two protons and two neutrons. Gamma decay, on the other hand, involves the emission of a gamma ray, which is a high-energy photon. Neutron emission occurs when an unstable nucleus has too many neutrons, but this does not change the atomic number of the element.
Tambaya 31 Rahoto
Which of the following surfaces will radiate heat energy best?
Bayanin Amsa
A black surface will radiate heat energy best. This is because black surfaces are good absorbers of all wavelengths of light, including infrared radiation, which is the type of radiation associated with heat energy. As a result, they also emit more radiation at these wavelengths, making them better at radiating heat energy compared to surfaces that reflect or transmit more light, such as white, yellow, or red surfaces.
Tambaya 32 Rahoto
An object of mass 2 kg moves with a uniform speed of 10ms-1 for 5s along an straight path. Determine the magnitude of its acceleration
Bayanin Amsa
Since the object is moving with a constant velocity, its acceleration is zero. This is because acceleration is the rate of change of velocity over time, and if the velocity is constant, there is no change and hence, no acceleration. Therefore, the answer is (a) 0 ms-2.
Tambaya 33 Rahoto
If a gas is excited by high voltage to produce a discharge and the light is examined in a spectrometer
Bayanin Amsa
When a gas is excited by high voltage to produce a discharge and the light is examined in a spectrometer, an emission spectrum is observed. This is because the excited gas atoms emit energy in the form of light of specific wavelengths as they return to their ground state. These emitted wavelengths are characteristic of the element or compound being examined and appear as bright lines in the spectrum. Therefore, the emission spectrum can be used to identify the elements present in the gas being examined.
Tambaya 34 Rahoto
There is always an uncertainty involved in any attempt to measure the position and momentum of an electron simultaneously. This statement is known as the
Bayanin Amsa
The statement "There is always an uncertainty involved in any attempt to measure the position and momentum of an electron simultaneously" is known as the Heisenberg uncertainty principle. It states that it is impossible to simultaneously determine the precise position and momentum of a subatomic particle such as an electron. The more precisely we know the position of an electron, the less precisely we can know its momentum, and vice versa. This principle is a fundamental concept in quantum mechanics and has important implications for our understanding of the behavior of particles at the subatomic level.
Tambaya 35 Rahoto
Which of the following physical quantities is correctly paired with it's corresponding S.I unit?
Tambaya 36 Rahoto
A dry plastic comb used in combing hair was found to attract pieces of paper and dust. The most probable explanation for this phenomenon is that the comb has been given
Bayanin Amsa
The most probable explanation for the phenomenon of a dry plastic comb attracting pieces of paper and dust is that the comb has been electrically charged by friction. When the comb is rubbed against hair, electrons are transferred from the hair to the comb, leaving the comb with a negative charge and the hair with a positive charge. The negative charge on the comb can then attract positively charged pieces of paper and dust. This process is called charging by friction or triboelectric charging. Therefore, "electric charges by friction" is the correct answer.
Tambaya 37 Rahoto
Which of the following electromagnetic wave can be detected by its heating effect?
Bayanin Amsa
Infrared radiation can be detected by its heating effect. Infrared radiation is a type of electromagnetic radiation that has longer wavelengths than visible light. When infrared radiation falls on an object, the energy is absorbed by the object, causing the object's temperature to increase. This effect is commonly used in devices such as infrared heaters and thermal imaging cameras, which use infrared radiation to detect the heat signature of objects. Therefore, option D (infrared radiation) is the correct answer to the question.
Tambaya 38 Rahoto
A body accelerates uniformly from rest at 2ms-2. Calculate the magnitude of its velocity after travelling 9m
Bayanin Amsa
To solve this problem, we can use the kinematic equation: v2 = u2 + 2as Where: v = final velocity (what we want to find) u = initial velocity (in this case, 0 since the body starts from rest) a = acceleration (given as 2 ms-2) s = distance travelled (given as 9m) Substituting the given values, we get: v2 = 02 + 2 x 2 ms-2 x 9m v2 = 36 ms-1 v = √(36) ms-1 Therefore, the magnitude of the velocity of the body after travelling 9m with a uniform acceleration of 2ms-2 is 6.0 ms-1.
Tambaya 39 Rahoto
An object is placed 10cm in front of a plane mirror. If it is moved 8cm away father away from the mirror, determine the distance of the final image from the mirror
Bayanin Amsa
When an object is placed in front of a plane mirror, its image is formed behind the mirror at the same distance as the object is from the mirror.
In this case, the object is placed at a distance of 10 cm from the mirror. Therefore, the image will also be formed at a distance of 10 cm behind the mirror.
When the object is moved 8 cm farther away from the mirror, its new distance from the mirror will be 18 cm (10 cm + 8 cm).
Since the image distance from the mirror is always equal to the object distance from the mirror, the distance of the final image from the mirror will also be 18 cm.
Therefore, the correct answer is: 18cm
Tambaya 40 Rahoto
In which of the following piece of apparatus is the radius of curvature equal to twice the focal length?
Bayanin Amsa
Tambaya 41 Rahoto
Which of the following statements about sound wave is not correct? Sound waves can be
Bayanin Amsa
The statement that sound waves can be polarized is not correct.
Polarization refers to the orientation of the electric field component of a transverse wave. However, sound waves are longitudinal waves, which means that they oscillate in the same direction as the wave propagation. Therefore, sound waves do not have an electric field component and cannot be polarized.
On the other hand, sound waves can be reflected, refracted, and diffracted. Reflection occurs when a sound wave bounces off a surface, such as an echo in a room. Refraction occurs when a sound wave bends as it passes through a medium with a different density, such as when sound waves pass through air with different temperatures. Diffraction occurs when a sound wave bends around obstacles in its path, such as when sound waves from a speaker spread out in all directions.
Tambaya 42 Rahoto
Which of the following operations does not represent an action of a force field?
Bayanin Amsa
The operation that does not represent an action of a force field is the "pushing of a wheel-barrow on a level ground". A force field is a region where a force acts on an object, and the object experiences a force because of the interaction with the field. In the case of the pushing of a wheel-barrow, the force is not a result of a field but is applied by the person pushing the wheelbarrow. Therefore, this operation does not represent an action of a force field.
Tambaya 43 Rahoto
A car of mass 800kg moves from rest on a horizontal track and travels 60m in 20s with uniform acceleration. Assuming there were no frictional forces, calculate the accelerating force
Bayanin Amsa
Tambaya 44 Rahoto
Which of the following wave is electromagnetic?
Bayanin Amsa
Electromagnetic waves are waves that are capable of propagating through a vacuum or through different media. These waves are made up of changing electric and magnetic fields that are perpendicular to each other and to the direction of the wave's propagation. Sound waves, water waves, and tidal waves are all mechanical waves, meaning they require a medium to propagate through. X-rays, on the other hand, are electromagnetic waves, which means they do not require a medium to propagate through and can travel through a vacuum. Therefore, the correct answer is x-rays.
Tambaya 45 Rahoto
Five 80-W and three 100W are run for 8 hours. If the cost of energy is N5.00 per unit, calculate the cost of running the lamp. [1 unit = 1 kWh]
Bayanin Amsa
The total energy consumed by the lamps can be calculated by first finding the total power rating of the lamps, and then multiplying it by the time they were used.
Total power = (5 x 80W) + (3 x 100W) = 400W + 300W = 700W
Total energy = Power x Time = 700W x 8 hours = 5600 Wh = 5.6 kWh
Since 1 unit = 1 kWh, the energy consumed is 5.6 units.
The cost of running the lamps can then be calculated by multiplying the energy consumed by the cost per unit of energy.
Cost = Energy consumed x Cost per unit = 5.6 units x N5.00 per unit = N28.00
Therefore, the cost of running the lamps is N28.00. Answer is the correct answer.
Tambaya 46 Rahoto
A body of mass 200g and specific heat capacity 0.4Jg-1k-1 cools from 37oC to 31oC. Calculate the quantity of the heat released by the body.
Bayanin Amsa
The quantity of heat released by the body can be calculated using the formula:
Q = mcΔT
where Q is the quantity of heat, m is the mass of the body, c is the specific heat capacity, and ΔT is the change in temperature.
Substituting the given values:
m = 200g = 0.2kg
c = 0.4Jg^-1k^-1
ΔT = (31 - 37)°C = -6°C
Q = (0.2kg) x (0.4Jg^-1k^-1) x (-6°C)
= -0.48J
The negative sign indicates that the body released heat to the surroundings, which is the expected outcome since the body cooled down. Thus, the correct answer is 0.48J. However, none of the given options match this value exactly. The closest option is 480J, but this is off by a factor of 1000.
Tambaya 47 Rahoto
The diagram above illustrates three forces acting on an object at point O. If the object is in equilibrium, determine the magnitude of the force P.
Bayanin Amsa
Tambaya 48 Rahoto
A relative density bottle of volume 50cm3 is completely filled with a liquid at 30oC. It is then heated to 80oC such that 0.75cm3 of the liquid is expelled. Calculate the apparent cubic expansivity of the liquid.
