JAMB UTME - Chemistry - 2019

Bayanin Amsa

Recall:
V = $\sqrt{\frac{3RT}{M}}$
$\therefore V\propto \frac{1}{\sqrt{M}}$
$V=\frac{k}{\sqrt{M}}$
V = $\frac{k}{M^{\frac{1}{2}}}$

Bayanin Amsa

Ammonium chloride contains both ionic and covalent bonds. In ammonium chloride, the ammonium ion (NH4+) is positively charged and the chloride ion (Cl-) is negatively charged. These ions are held together by ionic bonds, which are formed between positively and negatively charged ions. However, the bond between the hydrogen atom in the ammonium ion and the nitrogen atom in the ammonium ion is also a covalent bond. This type of covalent bond is known as a dative covalent bond, or a coordinate covalent bond, because the electron pair being shared is supplied by one atom only (the nitrogen atom in this case). So, the kind of bonding present in ammonium chloride is both ionic and dative covalent. In simple terms, ammonium chloride contains both ionic bonds between its positive and negative ions, and a dative covalent bond between the hydrogen atom and nitrogen atom within the ammonium ion.

Bayanin Amsa

It should be noted that for X to liberate CO${}_2$, X must be a carbonate or an oxalate. Since X decolorizes KMnO${}_4$, X must be an oxalate. 
Therefore, X is H${}_2$C${}_2$O${}_4$.

Bayanin Amsa

Bayanin Amsa

Cr${}_2$O${}_7^{2-}$ + 6Fe${}^{2+}$ + 14H${}^{+}$ $\to$ 2Cr${}^{3+}$ + 6Fe${}^{3+}$ + 7H${}_2$O
The oxidation of Cr in Cr${}_2$O${}_7^{2-}$ :
Let the oxidation of Cr = x; 
2x + (-2 x 7) = -2 $⟹$ 2x - 14 = -2
2x = 12 ; x = +6
Hence, the change in oxidation of Cr = +6 to +3

Bayanin Amsa

Elements in the periodic table are arranged in the order of their atomic numbers. The atomic number of an element is the number of protons in the nucleus of an atom of that element. The elements are arranged in order of increasing atomic number from left to right and from top to bottom in the periodic table. The elements in each row, also known as a period, have the same number of electron shells, while the elements in each column, also known as a group or family, have the same number of valence electrons. This arrangement makes it possible to predict the chemical and physical properties of an element based on its position in the periodic table. Therefore, the correct answer is: - atomic numbers

Bayanin Amsa

The following factors increase a reaction rate

- Increase in concentration of reactants

- Increase in temperature

- Addition of catalyst

- Increase in the surface area of reactant(s)

Bayanin Amsa

Hydrogen bond is a covalent intermolecular bond that exists between hydrogen and highly electronegative elements like nitrogen, oxygen and fluorine.

Bayanin Amsa

Bayanin Amsa

Electrons are not found in the nucleus of an atom. The nucleus of an atom only contains protons and neutrons, while electrons are located outside the nucleus in the electron cloud. The mass number of an atom is equal to the sum of the number of protons and the number of neutrons in the nucleus. Therefore, if an atom has a mass number of 23 and 17 neutrons, then the number of protons in the nucleus can be calculated as: Protons = Mass number - Neutrons Protons = 23 - 17 Protons = 6 This means that the nucleus of the atom contains 6 protons. The number of electrons in a neutral atom is equal to the number of protons, so the atom also contains 6 electrons in the electron cloud surrounding the nucleus. In summary, the answer is that there are 6 protons and 6 electrons in the atom.

Bayanin Amsa

Bayanin Amsa

The compound formed when the end alkyl groups of ethyl ethanoate are interchanged is ethyl propanoate. This is because ethyl ethanoate consists of two parts: the "ethyl" group and the "ethanoate" group. The ethyl group is a two-carbon chain, and the ethanoate group is a combination of a one-carbon chain and a carbonyl group (C=O) that is also attached to an oxygen atom. When the end alkyl groups are interchanged, the "ethyl" group is moved from the second carbon to the first carbon of the ethanoate group, and the "propanoate" group is formed. The "propanoate" group consists of a three-carbon chain and the carbonyl group. Therefore, the resulting compound is ethyl propanoate, which has a chemical formula of CH3CH2COOCH2CH3. This compound is commonly used as a flavoring agent and has a fruity odor reminiscent of pears.

Bayanin Amsa

To solve this problem, we need to use the concept of stoichiometry and the solubility product constant (Ksp) of calcium hydrogen trioxocarbonate (IV). First, we need to write the balanced equation for the reaction that occurs when the solution of calcium hydrogen trioxocarbonate (IV) is heated: Ca(HCO3)2(s) → CaCO3(s) + H2O(g) + CO2(g) From the balanced equation, we can see that 1 mole of calcium hydrogen trioxocarbonate (IV) produces 1 mole of calcium carbonate. Therefore, we need to determine the number of moles of calcium hydrogen trioxocarbonate (IV) in the solution: Number of moles = concentration x volume Number of moles = 0.50 mol/dm³ x 0.2 dm³ Number of moles = 0.1 mol Since 1 mole of calcium hydrogen trioxocarbonate (IV) produces 1 mole of calcium carbonate, the number of moles of calcium carbonate produced will also be 0.1 mol. Next, we need to use the solubility product constant (Ksp) of calcium carbonate to determine the maximum amount of solid that can be precipitated: Ksp = [Ca²⁺][CO3²⁻] Ksp = 3.3 x 10⁻⁹ (at 25°C) At the maximum amount of solid precipitated, all the calcium carbonate formed will have precipitated, and the concentration of calcium ions and carbonate ions will be equal. Therefore, we can assume that the concentration of calcium ions and carbonate ions is both x. Substituting into the Ksp expression: Ksp = x² 3.3 x 10⁻⁹ = x² x = 5.74 x 10⁻⁵ mol/dm³ The mass of calcium carbonate precipitated can now be calculated: Mass = number of moles x molar mass Mass = 0.1 mol x 100.1 g/mol Mass = 10.01 g Therefore, the maximum weight of solid precipitated is approximately 10 g. Note that this calculation assumes that all the calcium carbonate precipitated as a solid, which may not always be the case in a real-world experiment. Additionally, this calculation does not take into account any losses due to filtration or other experimental errors.

Bayanin Amsa

Bayanin Amsa

Equation of reaction : 2NaOH + H${}_2$SO${}_4$ → Na${}_2$SO${}_4$ + 2H${}_2$O

Concentration of a base, CB = 0.5M

Volume of acid, V${}_A$ = 10cm${}^3$

Concentration of an acid, C${}_A$ = 1.25M

Volume of base, V${}_B$ = ?

Recall:
$\frac{C_A{V}_A}{C_B{V}_B}=\frac{n_A}{n_B}$ ... (1)
N.B: From the equation,
$\frac{n_A}{n_B}=\frac{1}{2}$

From (1)
$\frac{1.25\times 10}{0.5\times V_B}=\frac{1}{2}$
$\frac{12.5}{0.5V_B}=\frac{1}{2}$
25 = 0.5V${}_B$

VB = 50.0 cm${}^3$

Bayanin Amsa

At standard temperature and pressure (s.t.p), all gases have the same number of atoms or molecules. What changes between them is the volume they occupy, and this is dependent on their molecular mass and the number of moles. Comparing the number of moles between the gases listed above, 7 moles of argon will contain the most number of atoms, followed by 4 moles of chlorine, then 3 moles of ozone, and finally 1 mole of butane would contain the least number of atoms. In summary, the number of atoms in a gas sample depends on the number of moles, but at s.t.p, the volume occupied by each gas depends on its molecular mass and the number of moles.

Bayanin Amsa

Ammonium nitrite = NH${}_4$NO${}_2$
NH${}_4^{+}$: Let the oxidation number of Nitrogen = x
x + 4 = 1 $⟹$ x = 1 - 4
x = -3
NO${}_2^{-}$: x - 4 = -1
x = -1 + 4 $⟹$ x = +3.
The oxidation numbers for Nitrogen in Ammonium Nitrite = -3, +3.

Bayanin Amsa

A secondary alkanol is an alcohol with two carbon atoms attached to the carbon bearing the hydroxyl group (-OH). Secondary alkanols can be oxidized by a strong oxidizing agent, such as potassium dichromate (K2Cr2O7), to give an alkanone. During the oxidation process, the oxygen atom from the oxidizing agent replaces the hydroxyl group of the secondary alkanol to form a carbonyl group (C=O) in the alkanone. Since alkanones contain a carbonyl group, they are also known as ketones. Therefore, the answer to the question is alkanone, as secondary alkanols can be oxidized to form ketones.

Bayanin Amsa

Using the ideal gas law and equation:
$\frac{P_1{V}_1}{T_1}=\frac{P_2{V}_2}{T_2}$
$\frac{P_1\times 200{\text{cm}}^3}{300\text{K}}=\frac{2P\times 150{\text{cm}}^3}{T_2}$
Cross multiply:
$T_2=\frac{300\times 150\times 2P}{200\times P}$
$=450\text{K}$ or ${177}^{\circ }\text{C}$
Don't forget to convert to ${}^{\circ }\text{C}$

Bayanin Amsa

For X:  X${}^{2+}$ + 2e${}^{-}$ $\to$ X
2F = 63g
xF = 6g
x = $\frac{6\times 2}{63}=\frac{4}{21}F$
$\frac{4}{21}$F = N12.00
1F = $\frac{12}{\frac{4}{21}}$
= N63.00
1F is equivalent to N63.00.
For Y: Y${}^{3+}$ + 3e${}^{-}$ $\to$ Y
3F = 27g 
xF = 9g
x = $\frac{3\times 9}{27}$
= 1F
1F = N63.00

Bayanin Amsa

The molecular formula of a compound is determined by the number of atoms of each element present in the molecule. To find the molecular formula, we need to determine the number of atoms of each element in the compound. First, we convert the percent composition to grams. For example, 40.0% carbon means 40.0 g of carbon per 100 g of compound. Then we divide the number of grams of each element by the molar mass of each element. For example, 40.0 g of carbon divided by the molar mass of carbon (12 g/mol) gives us 3.33 mol of carbon. Next, we convert the number of moles of each element to the number of atoms by multiplying the number of moles by Avogadro's number (6.022 x 10^23 atoms/mol). Finally, we balance the numbers of atoms of each element by dividing them by the smallest number of atoms of all the elements and rounding to the nearest whole number. In this case, the smallest number of atoms is 2, which is the number of hydrogen atoms. So, we divide the number of atoms of carbon and oxygen by 2 to balance the numbers of atoms of all the elements. Therefore, the molecular formula of the compound is C6H12O6.

Bayanin Amsa

Methyl orange is the best indicator for the reaction with range 3.1 - 4.4.

Bayanin Amsa

Bayanin Amsa

Bayanin Amsa

Hydrogen gas (H2) diffuses faster than oxygen gas (O2) through a porous plug. This is because the rate of diffusion of a gas through a porous plug is inversely proportional to the square root of its molar mass. Since the molar mass of hydrogen (2 g/mol) is much smaller than that of oxygen (32 g/mol), the rate of diffusion of hydrogen through a porous plug is much faster than that of oxygen. To be more specific, the ratio of the diffusion rates of two gases through a porous plug is given by the equation: Rate of diffusion of gas A / Rate of diffusion of gas B = √(Molar mass of gas B / Molar mass of gas A) Using the molar masses of hydrogen and oxygen, we get: Rate of diffusion of hydrogen / Rate of diffusion of oxygen = √(32 g/mol / 2 g/mol) = √16 = 4 Therefore, hydrogen diffuses through a porous plug four times as fast as oxygen. Thus, the correct answer is: four times as fast as oxygen.

Bayanin Amsa

The heat evolved in a chemical reaction can be calculated by subtracting the heat of formation of the reactants from the heat of formation of the products. In this case, the reactants are ethene (C2H4) and hydrogen (H2), and the product is ethane (C2H6). The heat of formation of ethene is 50 kJ/mol and that of hydrogen is 0 kJ/mol (because hydrogen is a reference element). The heat of formation of ethane is -82 kJ/mol. So, the heat evolved in the reaction is given by: Heat evolved = (Heat of formation of products) - (Heat of formation of reactants) = (-82 kJ/mol) - (50 kJ/mol + 0 kJ/mol) = -82 kJ/mol - 50 kJ/mol = -132 kJ/mol. Therefore, the heat evolved in the process is -132 kJ.

Bayanin Amsa

The condition that will most enhance the spontaneity of a reaction is when ΔH is negative (i.e., the reaction releases heat) and ΔS is positive (i.e., the reaction increases the disorder or randomness of the system). This is because a negative ΔH indicates that the reaction releases energy, which is favorable for a spontaneous reaction, while a positive ΔS indicates that the system becomes more disordered, which is also favorable for spontaneous reactions. Among the given options, the first condition of a negative and greater ΔH than ΔS is the best option for enhancing the spontaneity of a reaction. The other options have either a positive ΔH or a zero ΔS, which is not favorable for spontaneous reactions.

Bayanin Amsa

Given the Mass of the salt = 58.5g
Volume = 250 cm${}^3$ = 0.25 dm${}^3$
Mass concentration = $\frac{Mass}{Volume}$
= $\frac{58.5}{0.25}$ = 234 gdm${}^{-3}$
Solubility (in moldm${}^{-3}$ = $\frac{234}{111}$
= 2.11 moldm${}^{-3}$
$\approxeq$ 2.0 moldm${}^{-3}$

Bayanin Amsa

The double slash in the cell shorthand notation represents the salt bridge. A salt bridge is a component of an electrochemical cell that connects the two half-cells and allows the flow of ions between them. It consists of an inert electrolyte solution (usually a salt) that is placed between the two half-cells. The purpose of the salt bridge is to maintain electrical neutrality in each half-cell by allowing the flow of ions to balance the charge buildup in the half-cells. In the cell shorthand notation, the double slash "//" represents the salt bridge that connects the two half-cells of the electrochemical cell. The first half-cell is represented on the left-hand side of the slash and the second half-cell is represented on the right-hand side of the slash. The anode (where oxidation occurs) is represented on the left side, and the cathode (where reduction occurs) is represented on the right side. Therefore, the correct answer is option number 3: salt bridge.

Bayanin Amsa

Bayanin Amsa

Burning magnesium ribbon in air will remove oxygen (option i) from the air, but not nitrogen (option ii), argon (option iii), or carbon dioxide (option iv). When magnesium burns, it reacts with oxygen in the air to form magnesium oxide. The reaction can be represented by the following equation: 2Mg(s) + O2(g) → 2MgO(s) The magnesium in the ribbon combines with oxygen in the air to form solid magnesium oxide. This reaction is exothermic, which means that it releases heat and light energy. So, when magnesium ribbon is burned in air, it consumes the oxygen in the air to form magnesium oxide. However, nitrogen, argon, and carbon dioxide are not chemically reactive with magnesium, and therefore are not removed from the air by the burning of magnesium ribbon. In summary, the correct option is (i) only - burning magnesium ribbon in air removes oxygen only.

Bayanin Amsa

The part of the total energy of a system that accounts for the useful work done in a system is known as "Gibbs free energy". Gibbs free energy is a thermodynamic property that represents the amount of energy that can be converted into useful work in a system. It takes into account both the energy of the system and the entropy, or disorder, of the system. In other words, Gibbs free energy is a measure of the energy available to do work, taking into account the energy that is unavailable due to entropy. In simple terms, if a system has a high Gibbs free energy, it has a lot of energy available to do work, and if a system has a low Gibbs free energy, it has little energy available to do work.

Bayanin Amsa

R.A.M of Z = $16\left(\frac{80}{100}\right)+18\left(\frac{20}{100}\right)$
= $12.8+3.6$
= 16.4

Bayanin Amsa

X${}^{3+}$ + 3e${}^{-}$ $\to$ X
3F = 27g
xF = 10g
$\frac{x}{3}=\frac{10}{27}⟹x=\frac{10}{9}F$
$\frac{10}{9}$F $\equiv$ N20.00
1F is equivalent to x
$\frac{1}{\frac{10}{9}}=\frac{x}{20}$
$\frac{9}{10}=\frac{x}{20}⟹x=N18.00$
1F is equivalent to N18.00.
Y${}^{2+}$ + 2e${}^{-}$ $\to$ Y
2F = 24g
xF = 6g
x = $\frac{6\times 2}{24}=\frac{1}{2}F$
1F = N18.00
$\frac{1}{2}$F = $\frac{1}{2}\times N18.00$
= N9.00

Bayanin Amsa

A synthetic rubber is obtained from the polymerization of isoprene. Isoprene is a type of hydrocarbon that can be polymerized, or chemically joined together, to form long chains. This process is called polymerization, and the resulting material is called a polymer. When isoprene is polymerized, it forms a synthetic rubber, which is a type of polymer that is used in a wide range of products, including tires, hoses, and adhesives. Synthetic rubber offers several advantages over natural rubber, including improved durability and resistance to heat, ozone, and chemicals.

Bayanin Amsa

The quantum that divides shells into orbitals is the "Azimuthal" quantum number, also known as the "angular momentum" quantum number. The azimuthal quantum number determines the shape of an electron's orbital, which is a region in space where there is a high probability of finding an electron. It describes the angular momentum of an electron in an atom and the number of subshells within a given shell. Each subshell is associated with a specific shape, and can hold a certain number of electrons. The azimuthal quantum number is represented by the letter "l" and can have integer values ranging from 0 to (n-1), where "n" is the principal quantum number. Each value of "l" corresponds to a different subshell shape: - l = 0 corresponds to an "s" subshell, which is spherical in shape. - l = 1 corresponds to a "p" subshell, which has a dumbbell shape with two lobes. - l = 2 corresponds to a "d" subshell, which has a more complex shape with four lobes and a doughnut-like ring. - l = 3 corresponds to an "f" subshell, which has an even more complex shape with eight lobes. The number of orbitals within a subshell is equal to 2l+1. For example, a "p" subshell (l = 1) has three orbitals (2l+1 = 3), which are labeled as "px", "py", and "pz". In summary, the azimuthal quantum number determines the shape of the electron's orbital and the number of subshells within a given shell, and it is represented by the letter "l".

Bayanin Amsa

The option that does not support the fact that air is a mixture is "the constituents of air are in a fixed proportion by mass". Air is a mixture of different gases, primarily nitrogen (78%) and oxygen (21%), with small amounts of other gases such as carbon dioxide, argon, and neon. The proportion of each gas in air is not fixed and can vary depending on the location and other factors. For example, the amount of carbon dioxide in air can increase in areas with high levels of pollution, while the proportion of oxygen can decrease at high altitudes. Therefore, the composition of air is not in a fixed proportion by mass. On the other hand, the fact that air cannot be represented with a chemical formula and its constituents can be separated by physical means support the fact that air is a mixture. A chemical formula represents a pure substance, and since air is a mixture of gases, it cannot be represented by a single formula. Air can be separated into its individual components through physical means such as distillation or filtration, which is a characteristic of mixtures.

Bayanin Amsa

To calculate the volume of a solution, we need to use the formula: moles of solute = concentration x volume First, let's find the number of moles of sodium trioxonitrate (V) in 5g of the solute. The molar mass of NaNO3 is: Na = 23 N = 14 3 x O = 3 x 16 = 48 Molar mass = 23 + 14 + 48 = 85 g/mol The number of moles of NaNO3 in 5g is: moles = mass / molar mass = 5 / 85 = 0.0588 moles Now, we can use the formula above to find the volume of the solution: moles of solute = concentration x volume volume = moles of solute / concentration volume = 0.0588 moles / 0.100 M volume = 0.588 litres Therefore, the correct answer is 0.588 litres of 0.100M sodium trioxonitrate (V) solution contains 5g of solute.

Bayanin Amsa

Given: The equation below

A${}_{\left(s\right)}$ + 2B${}_{\left(g\right)}$ → 2C${}_{\left(aq\right)}$ + D${}_{\left(g\right)}$

Since we have a higher number of moles of gaseous species on the LHS, i.e 2, a decrease in pressure will favor the forward reaction.

Bayanin Amsa

The pair that cannot be represented with a chemical formula is air and bronze. Air is a mixture of several gases, primarily nitrogen (N₂) and oxygen (O₂), with small amounts of other gases such as argon (Ar), carbon dioxide (CO₂), and neon (Ne). Since air is a mixture and not a pure substance, it cannot be represented by a chemical formula. Bronze, on the other hand, is an alloy composed mainly of copper (Cu) and tin (Sn) with small amounts of other metals. The composition of bronze can vary depending on the specific alloy, but it can be represented by a chemical formula such as CuSn. Sodium chloride (NaCl) is a compound composed of sodium (Na) and chlorine (Cl) in a fixed ratio of 1:1, and it can be represented by a chemical formula. Similarly, copper (Cu) and sodium chloride (NaCl) can each be represented by a chemical formula. Cu is an element, so its chemical formula is simply its symbol, while NaCl is a compound with a fixed ratio of sodium and chlorine atoms. Caustic soda (sodium hydroxide, NaOH) and washing soda (sodium carbonate, Na₂CO₃) are both compounds that can be represented by chemical formulas. NaOH consists of one sodium atom, one oxygen atom, and one hydrogen atom, while Na₂CO₃ consists of two sodium atoms, one carbon atom, and three oxygen atoms.