JAMB UTME - Chemistry - 2024

In the process of silver plating a spoon using an electrolytic cell, the correct configuration involves the following:

Cathode: The object to be plated, which in this case is the spoon. In an electrolytic cell, the cathode is where the reduction reaction occurs, and it is the surface on which the metal ions are deposited.

Anode: A rod made of silver. The anode is where oxidation occurs, meaning the silver rod will dissolve into the solution in the form of silver ions. These ions then move towards the cathode to be deposited as a thin layer on the spoon.

Electrolyte: A solution that contains a soluble silver salt (such as silver nitrate, AgNO₃). The silver ions from this salt help in the process of transferring the silver from the anode to the cathode.

Thus, the proper order for silver plating a spoon in an electrolytic cell for industrial production is: "Cathode is the spoon; anode is a silver rod; electrolyte is a soluble silver salt."

Alkylation of benzene is a part of a reaction class called **Friedel-Crafts alkylation**. In this reaction, an alkyl group is transferred to the aromatic benzene ring, making it a more complex molecule. The catalyst used in this process is **aluminium chloride (AlCl₃)**.

Here's how the reaction typically works:

• Role of Aluminium Chloride: Aluminium chloride acts as a Lewis acid catalyst in this process. It helps in generating a carbocation from the alkyl halide. This carbocation is highly electrophilic, which means it is positively charged and seeks electrons.
• Interaction with Benzene: Benzene has a high electron density due to its conjugated π-electron system, making it nucleophilic, or electron-rich. The carbocation readily attacks the benzene ring to form a new carbon-carbon bond, attaching the alkyl group to the ring.
• Completion of the Reaction: Finally, the aluminium chloride can be regenerated, returning to its initial form, and can be reused in the catalytic cycle. This aspect is crucial as it underscores the functioning of aluminium chloride as a catalyst.

In contrast, the other options wouldn't effectively catalyze alkylation of benzene for the following reasons:

• Palladium: This metal is often used in hydrogenation and coupling reactions but is not suitable for Friedel-Crafts alkylation.
• Nickel: Similar to palladium, nickel is used in hydrogenation but not in this type of reaction.
• Sunlight: It can provide energy for photochemical reactions but does not play the role of a catalyst in the alkylation of benzene.

Therefore, **aluminium chloride** is the catalyst used for the alkylation of benzene in Friedel-Crafts reactions.

Aqueous solution of sodium hydroxide (NaOH) is a versatile reagent in chemistry, often used to test for the presence of metal ions. When sodium hydroxide is added to solutions containing certain metal ions, it forms precipitates that are characteristic of those ions. Here's how it interacts with each of the mentioned ions:

Calcium ions (Ca²⁺): When NaOH is added to a solution containing calcium ions, a white precipitate of calcium hydroxide (Ca(OH)₂) can form. However, the precipitate is only slightly soluble in water, and this reaction is not the most definitive test for calcium ions.

Zinc ions (Zn²⁺): When sodium hydroxide is added to a solution containing zinc ions, a white gelatinous precipitate of zinc hydroxide (Zn(OH)₂) forms. This precipitate is soluble in excess NaOH, leading to a clear, colorless solution. This reaction is used to test for zinc ions.

Copper ions (Cu²⁺): When NaOH is added to a solution containing copper ions, a pale blue precipitate of copper(II) hydroxide (Cu(OH)₂) forms. This precipitate is insoluble even in excess NaOH, and the formation of this blue precipitate is a common test for copper ions.

Therefore, an aqueous solution of sodium hydroxide can be used to test for the presence of all three ions: calcium (Ca²⁺), zinc (Zn²⁺), and copper (Cu²⁺). The reaction and precipitate formation with each ion serve as indicators of their presence. Thus, the correct answer is:

I, II and III.

The amount of water that is chemically combined with a substance is referred to as water of crystallization. This is the water present in the crystalline form of a compound, necessary to maintain the structure of the crystals.

When certain substances crystallize from an aqueous solution, they incorporate a specific amount of water molecules into their crystal lattice structure. These water molecules are an integral part of the crystal and often affect its color, stability, and solubility. The water is combined in stoichiometric amounts, which means it is present in a fixed ratio relative to the rest of the molecule.

An example of this is copper(II) sulfate pentahydrate, which consists of copper(II) sulfate combined with five molecules of water per formula unit, represented as CuSO₄·5H₂O.

To find the volume of HCl that is required to completely neutralize the NaOH solution, we need to use the concept of a neutralization reaction. A neutralization reaction occurs when an acid and a base react to form water and a salt, thus neutralizing each other.

In this particular reaction, the balanced chemical equation is:

HCl + NaOH → NaCl + H₂O

Here, the equation tells us that one mole of HCl reacts with one mole of NaOH. Therefore, the molar ratio of HCl to NaOH is 1:1.

First, let's determine the number of moles of NaOH present in 20 cm³ solution:

Number of moles of NaOH = Concentration (mol/dm³) × Volume (dm³)

= 0.20 mol/dm³ × 20 cm³ × (1 dm³ / 1000 cm³)

= 0.20 × 0.020

= 0.004 moles

Since the reaction is in a 1:1 ratio, the number of moles of HCl required is also 0.004 moles.

Now, let's determine the volume of HCl solution required:

Volume of HCl (dm³) = Number of moles / Concentration

= 0.004 moles / 0.12 mol/dm³

= 0.03333 dm³

Convert this volume from dm³ to cm³:

0.03333 dm³ × 1000 cm³ / dm³ = 33.33 cm³

Therefore, the volume of HCl required is 33.33 cm³.

Benzene is a liquid hydrocarbon that is obtained from the fractional distillation of coal tar, and it is extensively used in the pharmaceutical industry. Let me break this down for you:

• **Fractional Distillation:** This is a process used to separate a mixture into its component parts, or fractions, based on differences in boiling points. Coal tar, a byproduct of coal processing, contains a myriad of compounds, and fractional distillation helps isolate specific hydrocarbons like benzene.
• **Benzene:** It is a simple aromatic hydrocarbon with the chemical formula C₆H₆. Benzene has a unique ring structure that makes it a crucial starting material or intermediate in **pharmaceutical synthesis.**
• **Uses in Pharmaceuticals:** Benzene is used to synthesize various medicinal compounds. It acts as a building block to create more complex molecules necessary for **drug manufacturing.**

That's why benzene plays an important role in the pharmaceutical industry, making it a highly valued product obtained through the distillation of coal tar.

An example of an amphoteric oxide is Al₂O₃ (aluminum oxide).

Amphoteric oxides are special because they can act as both acidic and basic oxides. This means they can react with both acids and bases to form salts and water, showcasing their dual behavior.

Here is how it works:

• Reacts with Acids: When aluminum oxide reacts with an acid, such as hydrochloric acid (HCl), it behaves like a base and forms a salt. For example, it will react to form aluminum chloride and water:
  Al₂O₃ + 6 HCl → 2 AlCl₃ + 3 H₂O.


• Reacts with Bases: When it reacts with a strong base, like sodium hydroxide (NaOH), it acts like an acid and also forms a salt and water. An example reaction might be:
  Al₂O₃ + 2 NaOH + 3 H₂O → 2 NaAl(OH)₄.

In contrast, oxides like CuO (copper(II) oxide) are basic oxides, and K₂O (potassium oxide) is a basic oxide as well. They don't exhibit both acidic and basic properties.

Therefore, the amphoteric nature of Al₂O₃ is what distinguishes it from common oxides that are strictly acidic or basic. This property is crucial in various chemical processes and applications.

To determine the percentage of hydrogen in the sixth member of aliphatic alkanes, we first need to understand the general formula for alkanes. Aliphatic alkanes are a class of hydrocarbons with the general formula C_nH_2n+2, where 'n' is the number of carbon atoms.

The sixth member of this series will have n = 6. Therefore, the molecular formula for the sixth member is C₆H₁₄.

To find the percentage of hydrogen, we first calculate the molar mass of C₆H₁₄:

• Molar mass of 1 carbon atom = 12
• Molar mass of 6 carbon atoms = 6 × 12 = 72
• Molar mass of 1 hydrogen atom = 1
• Molar mass of 14 hydrogen atoms = 14 × 1 = 14

Total molar mass of C₆H₁₄ = 72 + 14 = 86

Next, we calculate the percentage of hydrogen:

Percentage of hydrogen = (Molar mass of hydrogen atoms / Total molar mass) × 100

Percentage of hydrogen = (14 / 86) × 100 = 16.28%

Therefore, the percentage of hydrogen in the sixth member of the aliphatic alkanes is 16.28%.

Scandium is not regarded as a transition metal because its ion has no electron in the d-orbital.

To understand this, let's first define a transition metal. A transition metal is defined as an element that has an incomplete d-subshell in either its elemental form or in any of its common oxidation states.

When Scandium (Sc) loses electrons to form its most common ion (Sc³⁺), it loses three electrons. These electrons are removed from the 4s and 3d orbitals. The electron configuration for Scandium is [Ar] 3d¹ 4s². Upon losing three electrons to form Sc³⁺, the resulting electron configuration is [Ar], which means there are:

• No electrons in the 3d sublevel
• No electrons in the 4s sublevel

As a result, there are no electrons in the d-orbital of the Scandium ion, which does not meet the criteria for a transition metal.

The reaction described is the nitration of benzene to form nitrobenzene. This is an example of an electrophilic aromatic substitution reaction. **Nitration** involves replacing a hydrogen atom on a benzene ring with a nitro group (NO2). This reaction requires a nitrating mixture composed of concentrated nitric acid (trioxonitrate(V) acid) and concentrated sulfuric acid (tetraoxosulphate(VI) acid). Let me explain why:

Nitration is typically carried out using a mixture of **concentrated nitric acid and concentrated sulfuric acid** at a temperature of around **60°C**. The role of sulfuric acid in this mixture is to act as a catalyst and a dehydrating agent. It helps generate the nitronium ion (NO2⁺), which is the active electrophile that attacks the benzene ring.

Here's a simplified mechanism for this reaction:

• The concentrated sulfuric acid protonates the nitric acid, forming nitronium ion (NO2⁺).
• This powerful electrophile (NO2⁺) then attacks the electron-rich benzene ring, leading to the formation of an arenium ion.
• Lastly, the arenium ion loses a proton to regenerate the aromatic character of the benzene ring, resulting in the formation of nitrobenzene.

None of the other options listed (hydrochloric acid, phosphoric acid, and hydrogen iodide) contain the necessary combination of properties to generate the nitronium ion and facilitate the nitration of benzene.

Therefore, the correct mixture to carry out the nitration of benzene, forming nitrobenzene at a temperature of 60°C, is a combination of **concentrated nitric acid and concentrated sulfuric acid (tetraoxosulphate(VI) acid)**.

An example of a physical change is the boiling of water. Let me explain why this is considered a physical change:

A physical change is a change where the substances involved do not change their chemical composition, meaning they remain the same substance, just in a different form or appearance. In the case of boiling water, when water is heated to its boiling point, it changes from a liquid to a gas (steam), but it is still comprised of water molecules (H₂O). The change is reversible, so the gas can condense back into liquid water without any new substance being formed.

On the other hand:

• Exposing sodium metal to air: This is a chemical change as sodium reacts with components in the air, such as oxygen, forming new substances like sodium oxide.
• Dissolving calcium metal in water: This is a chemical change because calcium reacts with water to produce calcium hydroxide and hydrogen gas, forming new substances.
• Burning of kerosene: This is a chemical change as kerosene reacts with oxygen in the air to form new substances like carbon dioxide and water, and this transformation is irreversible.

Thus, boiling water is an excellent example of a physical change as it involves only the change in the state of matter without altering the substance's identity.

The chemical formula for potassiumhexacyanoferrate(II) is K₄Fe(CN)₆.

Let's break down the name to understand why:

1. Potassium (K): The compound includes potassium ions. In this case, four potassium ions are present, indicated by the subscript 4 in K₄.

2. Hexacyano: The prefix "hexa" means six, which signifies there are six cyanide ions (CN^-) in the complex. This is represented as (CN)₆.

3. Ferrate (II): The word "ferrate" suggests the presence of iron (Fe). The Roman numeral (II) indicates that the iron is in the +2 oxidation state.

Overall, the complex ion is [Fe(CN)₆] with a charge of 4-, so to balance the charge, four potassium ions (each with a charge of +1) are needed, resulting in the formula K₄Fe(CN)₆.

The petroleum fractions that distill at 200–250°C are naphtha and kerosene,

• Bitumen: has a boiling point value of 5250 ${}^0$C
• Gasoline: Has a boiling range of 40–200°C
• Diesel: Has a boiling range of 250–350°C
• Fuel oil, paraffin, lubricants: Have a boiling range of 300–370°C
• Residue, crude oil: Has a boiling point of more than 370°C

The **esterification reaction** is analogous to a **condensation reaction**. In chemistry, a **condensation reaction** is a type of chemical reaction where two molecules or functional groups combine to form a larger molecule, with the simultaneous loss of a small molecule, usually water. **Esterification** specifically involves the reaction between an acid (often a carboxylic acid) and an alcohol, resulting in the formation of an **ester** and the release of a molecule of water.

To explain this further, in an esterification reaction:

• An **alcohol** provides one part of the ester, containing the oxygen and part of the carbon chain.
• A **carboxylic acid** provides the other part, which includes the carbon double-bonded to an oxygen atom (the carbonyl group).
• The reaction produces the **ester** and water (**H₂O**) as byproducts.

Conversely, the other types of reactions you've mentioned have different mechanisms:

• An **oxidation reaction** involves the losing of electrons by a molecule, atom, or ion.
• A **neutralization reaction** involves the reaction of an acid and a base to form salt and water.
• A **hydrolysis reaction** essentially does the reverse of esterification, breaking an ester down into its constituent acid and alcohol with the addition of water.

Therefore, given the nature of how molecules join and release water, it's clear that the **esterification reaction** is analogous to a **condensation reaction**.

According to the Ideal gas equation, PV = nRT

Given: P = 1.58 atm, V = ?,  n = 1 mole, R = 0.082,  T= 13 + 273K = 286K

Substituting all the given parameters, 

                   V  = nRTP $\frac{nRT}{P}$

                   V =  1×0.082×2861.58 $\frac{\mathrm{<br>}}{}$

                   V = 14.84 dm3

Quantum numbers are a set of numbers that describe the position and energy of an electron in an atom. 

When the quantum number is equal to 3, the possible values for the azimuthal quantum number  are 0, 1, and 2:

• l=0, The resulting subshell is an "s" subshell.
• l =1, The resulting subshell is a "p" subshell.
• l =2: The resulting subshell is a "d" subshell. 

The three possible sub-shells when n=3 are 3s, 3p, and 3d.

Ethyne, also known as acetylene, is a simple alkyne with the chemical formula C₂H₂. In ethyne, each carbon atom is bonded to two other atoms: one hydrogen atom and the other carbon atom. The molecular structure of ethyne is linear, with a triple bond between the two carbon atoms.

To determine the hybridization scheme in ethyne, we need to examine the arrangement of the electron pairs around each carbon atom. In ethyne, each carbon atom is forming two sigma (σ) bonds and two pi (π) bonds. Let's explain:

• The two carbon atoms are linked by a triple bond, consisting of one sigma bond and two pi bonds. The sigma bond is formed by the overlap of orbitals directly between the two carbon nuclei. The pi bonds are formed by the overlap of p orbitals above and below the plane of the molecule.
• The carbon atoms in ethyne are bonded to only two atoms, which is indicative of a linear geometry.

When we consider the hybridization of the carbon atoms, we focus on the formation of sigma bonds and lone pairs. In ethyne, each carbon atom utilizes two orbitals to form sigma bonds: one with the hydrogen atom and one with the other carbon atom. This implies that each carbon atom in ethyne must use two hybrid orbitals.

The two hybrid orbitals formed by each carbon atom in ethyne are a result of mixing one s orbital with one p orbital. This hybridization is referred to as sp hybridization, characterized by a linear electron geometry. The remaining two unhybridized p orbitals on each carbon atom are responsible for forming the two pi bonds in the triple bond.

In conclusion, the hybridization scheme in ethyne is sp.

Alkanoates, also known as fatty acid esters, are primarily found in lipids. Lipids are a broad group of naturally occurring molecules that include fats, waxes, sterols, fat-soluble vitamins (such as vitamins A, D, E, and K), and others. One of the main components of lipids is fatty acids and their derivatives, such as alkanoates.

To be more specific, alkanoates can be found in the form of triglycerides, which are the main constituents of body fat in humans and animals, as well as vegetable fat. Triglycerides are composed of glycerol bound to three fatty acids, and these fatty acids are usually present in the form of alkanoates.

Unlike proteins and rubber, which are made up of amino acids and polymers of isoprene respectively, lipids are the primary class of biomolecules where these alkanoate compounds can be found in significant amounts.

To determine the order of increasing reactivity of the elements listed, it's important to understand the general trends in metal reactivity. Metals react by losing electrons, and their reactivity is often influenced by their ability to lose these electrons easily. In many cases, generally, alkali metals are the most reactive, and noble metals are the least reactive. Here's a basic description of the reactivity of the given metals:

• Calcium (Ca): An alkaline earth metal, it is highly reactive and will readily react with water and acids.
• Iron (Fe): A transition metal, less reactive than calcium, but it will rust (react with oxygen) and react with acids.
• Tin (Sn): Also a metal, less reactive than iron, but it can still react with acids.
• Copper (Cu): Another transition metal, copper is less reactive than tin and does not react with water easily, though it will slowly react with oxygen over time.
• Gold (Au): A noble metal, gold is very unreactive, which is why it's used for jewelry and electronics.

With these considerations in mind, the order of increasing reactivity from the given options would be:

Gold (Au) < Copper (Cu) < Tin (Sn) < Iron (Fe) < Calcium (Ca)

This is the order where the least reactive element is first (gold), and the most reactive element is last (calcium). Hence, the correct option represents the order: Au < Cu < Sn < Fe < Ca.

To determine the condition of the solution containing KNO₃ at 30⁰C, let's start by calculating the molarity of the given solution.

The molecular weight of KNO₃ (Potassium Nitrate) is approximately:

• K = 39 g/mol
• N = 14 g/mol
• O = 16 g/mol

Thus, KNO₃ = 39 + 14 + (16 * 3) = 101 g/mol.

Now, to determine the molarity of the given solution:

• 303 g/dm³ of KNO₃
• Moles of KNO₃ = 303 g / 101 g/mol = 3 mol/dm³

Compare with the solubility at 30⁰C:

• The solubility of KNO₃ at 30⁰C is given as 3.10 mol/dm³
• The calculated molarity of the given solution is 3 mol/dm³.

If we compare the values:

• The solution's molarity (3 mol/dm³) is less than the solubility limit (3.10 mol/dm³)

Hence, the solution is unsaturated because it can still dissolve more KNO₃ until it reaches the solubility limit of 3.10 mol/dm³.

Rust on the surface of a metal, specifically on **iron**, is primarily composed of **hydrated iron(III) oxide**. The rusting process occurs when **iron** reacts with **oxygen** and **water** from the environment. This chemical reaction typically produces a compound called **iron(III) oxide**, which is then combined with water molecules, resulting in **hydrated iron(III) oxide**. This hydrated state gives rust its characteristic flaky and reddish-brown appearance.

The compound in question is K₄[Fe(CN)₆]. To name this complex using IUPAC nomenclature, let's break it down into parts:

• Potasium (K₄): This denotes four potassium ions. Potassium is not part of the complex ion; it is a counter ion that balances the charge of the complex ion.
• Fe(CN)₆: This is the complex ion.
• The ligand CN is the cyanide ion, which is named as cyano.
• Hexacyano: The prefix 'hexa-' indicates that there are six cyanide ligands attached to the central metal atom.

Next, consider the oxidation state of Fe:

• The formula of the complex is [Fe(CN)₆]^4-. Because each cyanide ion has a charge of -1, the total charge contributed by the six cyanide ions is -6.
• The overall charge is -4 due to the four potassium ions (K⁺), thus Fe must have a charge of +2 to balance the charge.

Finally, we consider the oxidation state of the iron. Since calculations show that it is +2, the complex ion is named based on its oxidation state.

Hence, the IUPAC name of this compound is potassium hexacyanoferrate(II).

The Biuret test is a chemical test used for detecting the presence of proteins. When you perform a Biuret test, you are looking for peptide bonds, which are the connections between the amino acids in a protein. This is how it works:

• When a solution containing proteins is mixed with Biuret reagent, which contains copper sulfate, a chemical reaction occurs.
• In this reaction, the copper ions form a complex with the peptide bonds present in the protein.
• This complex gives the solution a characteristic purple color if proteins are present.
• The intensity of the purple color can often indicate the amount of protein present in the sample.

The test is specifically tailored to proteins because carbohydrates, amines, and alkanoates do not exhibit the required peptide bonds necessary for this color change. Therefore, the Biuret test is not suitable for detecting these compounds.

To distinguish between strong acids and weak acids, we can employ several methods based on their chemical properties:

Conductivity Measurement: Strong acids dissociate completely in water, releasing more ions. Because ion concentration is directly related to electrical conductivity, strong acids exhibit higher conductivity than weak acids, which only partially dissociate.

Litmus Paper: This method helps determine if a solution is acidic or basic but does not provide detailed information about the strength (strong or weak) of an acid. Both strong and weak acids turn blue litmus red. Therefore, **litmus paper cannot effectively distinguish between a strong and a weak acid.**

Measurement of pH: Strong acids have a lower pH because they fully dissociate to release more hydrogen ions (H+), whereas weak acids have a relatively higher pH as they do not dissociate completely. Thus, pH measurement can distinguish the extent of acidity.

Measurement of Heat of Reaction: The heat of reaction can give insights into the strength of an acid because it involves the degree of ionization and the energetics associated with it. A strong acid will exhibit a different calorimetric response compared to a weak acid.

In summary, **litmus paper is not suitable for distinguishing between a strong and a weak acid**, as it only indicates acidity but does not reveal the strength of the acid.

The relationship between the two compounds is that they are isomers.

To understand why these compounds are isomers, let's break down their structures and definitions:

1. Structures of the Compounds:

• The first compound, CH₃-CH₂-OH, is known as ethanol. This compound is composed of two carbon atoms (C), six hydrogen atoms (H), and one oxygen atom (O).
• The second compound, CH₃-O-CH₃, is known as dimethyl ether. This compound also consists of two carbon atoms (C), six hydrogen atoms (H), and one oxygen atom (O).

2. Definitions:

• Isomers: Compounds that have the same molecular formula (same types and numbers of atoms) but different structural arrangements and properties.
• Allotropes: Different physical forms of the same element (e.g., carbon can exist as diamond, graphite, etc.).
• Isotopes: Atoms of the same element that have the same number of protons but different numbers of neutrons in their nuclei.
• Isobars: Atoms of different elements that have the same atomic weight (mass number) but different atomic numbers.

Both compounds have the same molecular formula: C₂H₆O. However, they have different arrangements of their atoms. Ethanol has a hydroxyl group (-OH) attached to an ethyl group (CH₃-CH₂-), while dimethyl ether involves two methyl groups (CH₃-) bonded to an oxygen atom (O). This difference in structure leads to different chemical and physical properties, despite having the same molecular formula. Hence, these two compounds are classified as isomers.

The compound in question is written as CH₃₃CH₂₂C(CH₃₃)=C(CH₃₃)₂₂, which seems to be intended as (CH₃)₃CH₂CH=C(CH₃)₃. The IUPAC nomenclature of organic compounds follows specific rules to name the compound uniquely such that it is understood universally. Here is a comprehensive breakdown:

1. Select the longest carbon chain that includes the highest-order functional group, which, in this case, is the alkene group (double bond).

2. The longest chain consists of 5 carbons, which gives us the root name "pentene". We choose the carbon chain such that the double bond gets the lowest possible number, starting from the end of the chain closest to the double bond.

3. Number the carbon atoms in the chain from the end closest to the double bond. The numbering direction will determine the position of the double bond and substituents. The double bond starts on carbon 2.

4. Identify and name the substituents attached to the carbon chain. In this case, there are two methyl groups on carbon 3. This means it is dimethyl as there are two of them.

Thus, the complete name of the compound is 2,3-dimethylpent-2-ene. Here, "2,3-dimethyl" indicates the position and quantity of methyl groups, "pent" indicates the longest chain with 5 carbons, and "-2-ene" indicates a double bond starting at the second carbon.

In the fountain experiment, hydrogen chloride gas (HCl) and ammonia (NH₃) are used to demonstrate the creation of a visible 'fountain' due to their high solubility in water. Here's a simple explanation:

When hydrogen chloride gas and ammonia gas come into contact with water, they dissolve very quickly and react vigorously. This is because both gases are very soluble in water. As they dissolve, a vacuum-like pressure is created inside the container where the gases are held, pulling water up into it, creating the 'fountain' effect.

Moreover, when HCl and NH₃ gases react with each other, they form a white, solid product known as ammonium chloride (NH₄Cl), which is a demonstration of how both gases can effectively dissolve and react with not just water, but also with each other.

Thus, the ability of these gases to create a fountain effect is primarily because they are very soluble in water, which allows them to dissolve rapidly and create the pressure differential necessary for the water to be pulled into the container dynamically.

The **scientist who performed the experiment on discharge tubes that led to the discovery of cathode rays as a sub-atomic particle** is J.J. Thomson.

In the late 19th century, J.J. Thomson conducted experiments using a cathode ray tube. This device involved an evacuated glass tube with electrodes at each end, through which an electric current was passed. **When a high voltage was applied, Thomson observed a stream of particles traveling from the negative electrode (cathode) to the positive electrode (anode).** These streams of particles were what he called "cathode rays."

Through his experiments, J.J. Thomson discovered that these cathode rays were composed of negatively charged particles. **He concluded that these particles were much smaller than atoms, and named them "electrons," which are now known to be sub-atomic particles.** His work was fundamental in advancing the atomic model and in understanding the structure of the atom.

Thomson's discovery was pivotal because it provided the first evidence that atoms are not indivisible, but rather consist of smaller subatomic particles. This **challenged the then-prevailing notion of atoms as indivisible units**, thus marking the birth of modern particle physics.

To understand the geometrical isomers of butene, we need to explore its structure. Butene has four carbon atoms, and there are various structural forms that butene can take. These structural forms include linear or branched chains, with a double bond present between carbon atoms.

Geometric isomerism is a type of stereoisomerism. It occurs due to restricted rotation around the double bond, leading to different spatial arrangements of groups attached to the carbons forming the double bond. The geometric isomerism primarily occurs in alkenes like butene where the positions of substituents can vary.

Let's consider the different types of butene, focusing on the possibility of geometrical isomerism:

• 1-butene: This is a straight-chain isomer with the double bond starting at the first carbon. It doesn't show geometrical isomerism because the double bond is at the end of the chain, so there are no different spatial arrangements of groups possible.
• 2-butene: Here the double bond is between the second and third carbon. In this case, geometrical isomerism is possible because different groups (or atoms) attached to the carbon atoms can have different spatial arrangements. Specifically:
  • cis-2-butene: Both methyl groups (CH₃) are on the same side of the double bond.
  • trans-2-butene: The methyl groups are on opposite sides of the double bond.
• Isobutene (or 2-methylpropene): This is a branched isomer, and it does not have geometric isomers because the substituents around the double bond do not allow for different spatial configurations on either side of the double bond.

In conclusion, for butene, only 2-butene has geometrical isomers (cis and trans). Therefore, the number of geometric isomers is 2.

To solve the problem, we can use **Graham's law of effusion**. This law states that the rate of effusion (or diffusion) of a gas is inversely proportional to the square root of its molar mass. Mathematically, this is represented as:

Rate of diffusion of Gas X / Rate of diffusion of Gas Y = sqrt(Molar mass of Gas Y / Molar mass of Gas X)

According to the given information, gas X diffuses **twice as fast** as gas Y. This implies:

2 = sqrt(Molar mass of Gas Y / Molar mass of Gas X)

To eliminate the square root, square both sides of the equation:

(2)^2 = Molar mass of Gas Y / Molar mass of Gas X

This simplifies to:

4 = Molar mass of Gas Y / Molar mass of Gas X

Rearranging the equation, we find:

Molar mass of Gas Y = 4 * Molar mass of Gas X

This means that **Gas Y is four times as heavy as Gas X**. Therefore, the correct statement is:

• **Gas Y is four times as heavy as Gas X**

Water pollutants are substances that, when introduced into the water, cause harm to ecosystems, human health, and the overall quality of the water. Each of the options provided has the potential to be considered a water pollutant, except for one. Let's explain them:

1. Inorganic fertilizers: These are substances mainly composed of synthetic chemicals, including nitrates and phosphates. When these fertilizers enter water bodies, they can lead to nutrient pollution, which causes excessive growth of algae (eutrophication), leading to a decrease in oxygen levels in the water, harming aquatic life.

2. Warm water affluent: This refers to the discharge of heated water into natural water bodies. This heat contamination can change the temperature of the water, affecting the metabolism of aquatic life and leading to thermal pollution.

3. Oxygen gas: Oxygen gas is a fundamental component of the Earth's atmosphere and is not considered a water pollutant. In fact, dissolved oxygen is crucial for the survival of aquatic organisms. Rather than causing any harm, adequate levels of dissolved oxygen in water bodies are essential for maintaining healthy aquatic ecosystems.

4. Biodegradable waste: These are organic materials that decompose in the environment. When introduced in large quantities into water bodies, they can consume a significant amount of dissolved oxygen as they decompose, which can lead to depletion of oxygen levels and cause harm to aquatic life, making them pollutants in aquatic ecosystems.

Given the explanations above, oxygen gas is the option that is not a water pollutant. It is vital for the health of aquatic ecosystems, unlike the other options, which can all lead to some form of pollution in water bodies.

To determine the change in oxidation state of sulfur, follow these steps:

In the given reaction:

H₂S(g) + Cl₂(g) → 2HCl(g) + S(s)

We observe:

• **Hydrogen sulfide (H₂S)** is a molecule where hydrogen (H) with an oxidation state of **+1** bonds with sulfur (S). Since the molecule is neutral, the oxidation state of sulfur in H₂S must balance out the positive oxidation states of the two hydrogen atoms, which is **+1** each. Therefore, the oxidation state of sulfur in H₂S is **-2**.
• **Sulfur (S) in elemental form** at the products is just sulfur solid (S_(s)), and for elements in their natural state, the oxidation state is **0**.

Thus, the change in oxidation state of sulfur when moving from the reactants to the products is from **-2** to **0**. This indicates that sulfur is being oxidized.

The correct answer is that the oxidation state of sulfur changes from **-2 to 0**.

The bond between Na and X is most likely to be ionic. Let's break this down simply:

In the equation provided:

Na₂X ⇌ 2Na⁺ + X²⁻

The sodium (Na) atoms become positively charged ions (Na⁺), while X becomes a negatively charged ion (X²⁻). This change in charge occurs because sodium atoms donate electrons to the X atom. The donation of electrons by sodium to X indicates a transfer of electrons, which is a hallmark of an ionic bond.

In an ionic bond, electrons are transferred from one atom to another, resulting in a positively charged ion and a negatively charged ion. These oppositely charged ions attract each other, forming a strong ionic bond.

In summary, since sodium (Na) donates electrons to X forming ions, the bond between Na and X is most likely to be ionic.

Originalmass2n
  =   Residual mass

Where n = number of activity =  exposuretimehalflife

Given: 

Original mass = 1g, exposure time = 10 minutes , half life = 2 minutes, Residual mass = ?

Substituting all the given parameters appropriately, we have

                     n = 102 $\frac{\mathrm{<br>}}{}$

                     n = 5

Originalmass2n $\frac{\mathrm{<br>}}{}$ =   Residual mass

125
5  =   Residual mass

132 $\frac{\mathrm{<br>}}{}$     =   Residual mass

Residual mass =  132
 or 0.03125g

The heat of solution refers to the overall energy change that occurs when a solute dissolves in a solvent. This process involves breaking and making of intermolecular forces, and it can be broken down into two main steps that are each accompanied by heat change. The energies involved in these steps are:

Lattice energy: This is the energy required to break the bonds between the ions in the solid crystal lattice of the solute. Breaking these bonds requires energy, and this step is usually endothermic, meaning it absorbs heat from the surroundings. The more energy needed to break the lattice, the higher the lattice energy.

Hydration energy: Once the lattice is broken, the ions are surrounded by solvent molecules, typically water, in a process known as hydration. The energy released when the solvent molecules interact with and stabilize the ions is called the hydration energy. This step is usually exothermic, meaning it releases heat into the surroundings.

In conclusion, the two energies involved in the heat of solution are lattice energy and hydration energy. The balance between these two energies determines whether the overall process of dissolving a solute in a solvent is endothermic or exothermic.

Permanent hardness in water is mainly caused by the presence of certain metal ions, specifically the **sulfates (SO₄²⁻)** and **chlorides (Cl⁻)** of calcium (Ca) and magnesium (Mg). These compounds do not precipitate out when the water is boiled, which means they remain dissolved and continue to contribute to the hardness of the water.

Among the options you provided, the ions responsible for permanent hardness in water are the **sulfates of calcium (Ca²⁺)** and **magnesium (Mg²⁺)**. The presence of calcium sulfate (CaSO₄) and magnesium sulfate (MgSO₄) in water keeps it hard.

When compared to temporary hardness, which can be removed by boiling the water to precipitate bicarbonates, **permanent hardness cannot be removed by boiling**. Instead, methods such as ion exchange or the use of water softeners are required to remove these ions from the water.

In summary, the ions causing permanent hardness in water are the **sulfates of calcium (Ca²⁺)** and **magnesium (Mg²⁺)**. These ions remain dissolved and continue to make the water hard, despite boiling.

To determine the empirical formula of an oxide of sulfur containing 60% of oxygen, we have to understand the concept of empirical formulas, which give the simplest whole-number ratio of atoms of each element in a compound.

Step 1: Assume 100g of the compound. In 100g of the compound:

• Oxygen (O) = 60g
• Sulfur (S) = 100g - 60g = 40g

Step 2: Convert masses to moles. Use the molar mass to find moles.

• Moles of Sulfur (S) = (40g) / (32g/mol) = 1.25 moles
• Moles of Oxygen (O) = (60g) / (16g/mol) = 3.75 moles

Step 3: Determine the simplest whole-number ratio.

To find the ratio, divide each mole value by the smallest number of moles calculated:

• For Sulfur: 1.25 / 1.25 = 1
• For Oxygen: 3.75 / 1.25 = 3

The simplest ratio of S:O is 1:3.

Thus, the empirical formula of the oxide is SO₃.

In the conductance of aqueous CuSO₄ solution, the current carriers are the hydrated ions.

Here's why:

• CuSO₄ in Water: When copper sulfate (CuSO₄) is dissolved in water, it dissociates into copper ions (Cu²⁺) and sulfate ions (SO₄^2-).
• Role of Water: In an aqueous solution, these ions become surrounded by water molecules. This surrounding by water is known as "hydration."
• Conductivity: The movement of these hydrated copper ions and sulfate ions through the solution constitutes the current in the solution. They are the mobile charge carriers that allow electric current to flow.

The other options can be understood as follows:

• Mobile Electrons: These are the primary current carriers in metallic conductors, not in ionic solutions like CuSO₄.
• Metallic Ions: This term generally refers to ions in a metallic lattice. In an aqueous solution, the relevant ions are hydrated, not metallic.
• Hydrated Electrons: This is not a correct term for describing the charge carriers in an aqueous CuSO₄ solution.

The correct answer is therefore hydrated ions because they enable the conduction of electricity through the aqueous solution.

To find the molecular formula of a hydrocarbon given its empirical formula and molar mass, you need to compare the empirical formula mass with the given molar mass.

The empirical formula given is CH₃. The molar mass of the empirical formula is calculated as follows:

• Carbon (C): 1 atom × 12 g/mol = 12 g/mol
• Hydrogen (H): 3 atoms × 1 g/mol = 3 g/mol

Total empirical formula mass = 12 + 3 = 15 g/mol

The provided molar mass of the compound is 30 g/mol. To determine how many empirical units are in the molecular formula, divide the molecular mass (given) by the empirical formula mass:

Number of empirical units = 30 g/mol / 15 g/mol = 2

Therefore, the molecular formula is twice the empirical formula:

Empirical formula: CH₃

Molecular formula: (CH₃)₂ = C₂H₆

The correct molecular formula is C₂H₆.

The general formula RCOR' represents a class of organic compounds known as ketones. In this formula, R and R' are alkyl groups, which are chains of carbon and hydrogen atoms. The CO in the middle is a carbonyl group, which consists of a carbon atom double-bonded to an oxygen atom. Therefore, with the presence of two alkyl groups on either side of the carbonyl group, the compound is categorized as a ketone, scientifically referred to as an alkanone.

Here is a simple breakdown of the terms:

• Alkanone: A term used to describe ketones, which have the general formula RCOR'.
• Alkanal: Represents aldehydes, which contain the functional group RCHO with at least one hydrogen attached to the carbon atom of the carbonyl group.
• Alkanoate: Typically refers to esters, which have the general form RCOOR'.
• Alkanoic acid: Refers to carboxylic acids, which are denoted by the functional group RCOOH.

Hence, by looking at the general formula RCOR', the organic compound in question is undoubtedly an alkanone.