JAMB UTME - Physics - 2019
Question 1 Rapport
Workdone on an object to bring it to a certain point in space is called
Détails de la réponse
The work done on an object to bring it to a certain point in space is called "Potential Energy". Potential energy is a form of energy that an object possesses due to its position relative to other objects. When an object is lifted or moved to a higher point against gravity, work is done on it, and this work is stored as potential energy. The potential energy of an object is directly proportional to its height and mass. It can be converted into other forms of energy, such as kinetic energy, when the object is released or allowed to move freely. Therefore, potential energy is a type of stored energy that an object has due to its position, and it can be released to do work.
Question 2 Rapport
A coil X is moved quickly away from the end Y of a stationary metal bar and a current then flows in X as shown above.
Then
Détails de la réponse
N - S magnet is moved towards a coil production clockwise direction of current in the coil.
- This is the same as a coil moved away from S-N (Y - North pole)
Question 3 Rapport
- angle of dip is zero at the magnetic equator
- angle of variation is the same as angle of declination.
Détails de la réponse
- angle of dip is zero at the magnetic equator
- angle of variation is the same as angle of declination.
Question 4 Rapport
The part of the human eye that does similar work as the diaphragm of a camera lens is the
Détails de la réponse
The part of the human eye that does similar work as the diaphragm of a camera lens is the iris. The iris is the colored part of the eye and is responsible for controlling the amount of light that enters the eye. Just like the diaphragm in a camera lens, the iris can adjust its size to allow more or less light into the eye. This helps to regulate the amount of light reaching the retina, which is responsible for sensing light and transmitting the image to the brain.
Question 5 Rapport
An object is acted upon by a system of parallel three causing the object to be in state equilibrium. Which of the following statement is not correct
Détails de la réponse
all the parallel forces must be equal in magnitude and direction
Question 6 Rapport
A car moving at 20m/s with its horn blowing (f = 1200Hz) is chasing another car going at 15m/s. What is the apparent frequency of the horn as heard by the driver being chased?
Détails de la réponse
| f1 | = | f(v - vo )v - vs | = | 1200(340 - 15)340 - 20 | = | 1.22KHz |
Question 7 Rapport
Any line or section taken through an advancing wave in which all the particles are in the same phase is called the
Détails de la réponse
The answer is: wave front. A wave front is any imaginary line or surface that connects all points of a wave that are in the same phase, meaning they are at the same point in their cycle. In other words, it is a line or surface that separates the points of a wave that are in-phase from those that are out-of-phase. For example, consider the ripples on the surface of a pond when a stone is thrown in. The wave fronts are the concentric circles that emanate from the point where the stone entered the water. All points along a given circle are in-phase, meaning the water molecules at those points are at the same point in their oscillation cycle. In summary, a wave front is a line or surface that separates points in a wave that are in-phase from those that are out-of-phase.
Question 8 Rapport
During the transformation of matter from the solid to the liquid state, the heat supplied does not produce temperature increase because
Détails de la réponse
When a solid is heated to its melting point, the heat supplied is used to overcome the intermolecular forces holding the molecules in a fixed position, resulting in the breaking of these bonds. As a result, the solid transforms into a liquid without any change in temperature. This is because the heat energy supplied is used in breaking the bonds between molecules rather than increasing the kinetic energy of the molecules, which is what causes an increase in temperature. Therefore, the correct option is: "all the heat is used to break the bonds holding the molecules of the solid together."
Question 9 Rapport
Which of the following characteristics of a wave is used in the measurement of the depth of the Sea?
Détails de la réponse
Depth of sea can be measured by echo, a reflected sound waves.
Question 10 Rapport
A mass of 0.5kg is whirled in a vertical circle of radius 2m at a steady rate of 2 rev/s. Calculate the centripetal force
Détails de la réponse
The centripetal force is the force that acts towards the center and keeps an object moving in a circular path. To calculate the centripetal force, we can use the following formula: f = m * v^2 / r where: - f = centripetal force - m = mass of the object (0.5 kg) - v = velocity of the object (2 rev/s * 2 * pi m/rev = 12.57 m/s) - r = radius of the circle (2 m) Plugging in the values, we get: f = 0.5 kg * 12.57 m/s^2 / 2 m f = 31.43 N Rounding to the nearest whole number, the centripetal force is 31 N. So, the closest answer from the options is 160N.
Question 11 Rapport
Which of the following is consistent with Charles' law?
I
II 
III
IV. 
Détails de la réponse
This is the correct graph. The graph is volume against 1/ temperature where temperature is in Celsius.
Question 12 Rapport
If the time of flight is 96seconds, calculate the horizontal range through the point of projection.
Détails de la réponse
Time of flight, T = 96s
R = (Ucosθ) *time* T = 640 × 96 = 61,440m
Question 13 Rapport
Which of the following statements are correct of the production and propagation of waves?
I. vibration produces waves
II. waves transmit energy along the medium
III. the medium through which the wave travels does not travel with the wave
IV. waves do not require any medium for transmission
Détails de la réponse
The correct statement is: I and II and III only. Explanation: - Statement I is correct because the production of waves involves some kind of disturbance that creates a vibration in the medium, which then propagates as a wave. - Statement II is correct because waves carry energy along the medium as they propagate. This is why waves can be used to transmit information or power over long distances. - Statement III is correct because the medium through which a wave travels does not move with the wave. Instead, the wave passes through the medium, causing it to oscillate or vibrate, but not to move along with the wave. - Statement IV is incorrect because most waves require a medium through which to propagate. For example, sound waves require air, water waves require water, and seismic waves require the Earth's crust. There are some types of waves, such as electromagnetic waves, that can propagate through a vacuum, but this is not true for all waves.
Question 14 Rapport
Which of the following statements is/are correct for a freely falling body?
I. the total is entirely kinetic
II. the ratio of potential energy to kinetic energy is constant
III. the sum of potential and kinetic energy is constant
Détails de la réponse
The correct answer is "III only". A freely falling body is one that is falling under the influence of gravity and experiences no other force or constraint. In this situation, the total energy of the body is conserved, meaning that the sum of its potential and kinetic energy remains constant. The potential energy of a body is directly proportional to its height above the ground, and its kinetic energy is directly proportional to its velocity. As the body falls, its potential energy decreases and its kinetic energy increases, but the total energy remains constant. Statement III is correct because the sum of potential and kinetic energy is indeed constant for a freely falling body. Statement I is incorrect because the body has both potential and kinetic energy, so the total energy is not entirely kinetic. Statement II is incorrect because the ratio of potential energy to kinetic energy is not constant for a freely falling body, as both are changing as the body falls.
Question 15 Rapport
The pin-hole camera produces a less sharply defined image when the
Détails de la réponse
The pin-hole camera produces a less sharply defined image when the pin-hole is larger. A pin-hole camera works by allowing light to pass through a small hole (the pin-hole) and project an inverted image of the outside world onto a screen or surface located behind the hole. The smaller the pin-hole, the sharper the resulting image, as light passing through a smaller hole produces less diffraction or spreading out of the light. When the pin-hole is larger, more light enters the camera, but the light rays also become more scattered, resulting in a less well-defined image. This is because the larger opening allows more light rays to enter at different angles, creating a wider range of paths that the light can take as it travels through the camera and onto the screen. As a result, the image is less clear and less defined, with less sharp edges and more blurring. is the correct answer because it correctly identifies the effect of a larger pin-hole on the image produced by the pin-hole camera. less illumination, would actually produce a dimmer image, but it would not affect the sharpness or definition of the image. the distance of the screen from the pin-hole, and the distance of the object from the pin-hole, would affect the size of the image and the scale of the objects, but they would not affect the sharpness or definition of the image.
Question 16 Rapport
The height at which the atmosphere cases to exist is about 80km. If the atmospheric pressure on the ground level is 760mmHg, the pressure at a height of 20km above the ground level is
\((\rho_m = 13.6g/cm^3\ \rho = 0.00013g/cm^3)\)
Détails de la réponse
ρm
hm
= ρa
ha
13.68(760 - p) × 10−3
= 13 × 10−5
(20 × 103
)
| 760 | - | p | = | 13 × 10−5 × 20 × 103 13.68 × 10−3 | = | 19.00 | × | 101 |
760 - p = 190
p = 760 - 190 = 570mmHg
Question 17 Rapport
Radio waves belongs to the class of ware whose velocity is about
Détails de la réponse
Radio waves belong to the class of waves whose velocity is approximately 3 x 10^8 m/s. This velocity is commonly denoted as the speed of light, which is the speed at which all electromagnetic waves, including radio waves, travel in a vacuum. This constant velocity is one of the fundamental principles of physics and is important in understanding the behavior and properties of light and other electromagnetic waves. The speed of light is incredibly fast, and it's difficult for us to imagine just how fast it is. To put it into perspective, light can travel around the Earth's equator almost 7.5 times in just one second. This high speed is essential for radio communication, as it enables radio waves to travel long distances in a short amount of time, allowing us to communicate with people and devices far away from us.
Question 18 Rapport
The following are some units
I. Ns
II. Non
III. \( \mathrm{Nm}^{-2} \)
IV. \( \mathrm{J^\circ K}^{-1} \)
V. \( \mathrm{JKj}^{-1} \)
What are the units of latent heat?
Détails de la réponse
Latent heat or specific latent heat = L
| Heat | energy | = | mL | or | L | = | Hm | = | energymass |
Question 19 Rapport
The limiting frictional force between two surfaces depends on
I. the normal reaction between the surfaces
II. the area of surface in contact
III. the relative velocity between the surfaces
IV. the nature of the surfaces
Détails de la réponse
- Friction depends on the nature of the surfaces in contact
- Solid friction is independent of the area of the surfaces in contact and the relative velocity between the surfaces.
Question 20 Rapport
In Sunlight, a blue flower looks blue because we see the flower by the light it
Détails de la réponse
In sunlight, a blue flower looks blue because it reflects blue light. When sunlight falls on an object, the object can either absorb, transmit, or reflect the light. The color of an object that we see is determined by the light that is reflected by that object. For example, if an object appears blue, it is because it reflects blue light and absorbs other colors. In the case of a blue flower in sunlight, the petals of the flower reflect blue light and absorb other colors. This reflected blue light enters our eyes, and our brain interprets it as the color blue. Therefore, we see the blue flower as blue because it reflects blue light, and that is the color that enters our eyes. In summary, the reason why a blue flower looks blue in sunlight is that it reflects blue light and absorbs other colors.
Question 21 Rapport
One newton × One meter equals?
Détails de la réponse
One newton times one meter is equal to one Joule. A newton is the unit of measurement for force, and a meter is the unit of measurement for distance. When force is applied over a distance, work is done, which is measured in Joules. Therefore, one newton multiplied by one meter results in one Joule of work done. The other options listed (one water, one ampere, one kilogram) are not correct units of measurement for this calculation.
Question 22 Rapport
A ray of light passes through the centre of curvature of a concave mirror and strikes the mirror. At what angle is the ray reflected?
Détails de la réponse
When a light ray passes through the center of curvature of a concave mirror and strikes the mirror, the reflected ray will be reflected back on itself, creating an angle of 0 degrees. Therefore, the correct answer is 0o.
Question 23 Rapport
In semi-conductor, the carriers of current at room temperature are
Détails de la réponse
In a semiconductor, the carriers of current at room temperature are both electrons and holes. Semiconductors are materials with properties that are in between those of conductors (e.g. metals) and insulators (e.g. rubber). At room temperature, a semiconductor crystal contains both free electrons and positively charged vacancies called holes. When a voltage is applied across the semiconductor, the electrons move towards the positive end of the circuit and the holes move towards the negative end. This movement of charge carriers constitutes an electric current. In summary, both electrons and holes can carry current in a semiconductor at room temperature, making the correct answer.
Question 24 Rapport
Which of these is observed when air is pumped out of a discharge tube without lowering its pressure
Détails de la réponse
Conduction takes places in gases when air is pumped out of a discharged tube under reduced pressure.
Question 25 Rapport
When two objects A and B are supplied with the same quantity of heat, the temperature change in A is obtained to be twice that of B. The mass of P is half that of Q. The ratio of the specific heat capacity of A to B is
Détails de la réponse
θA = 2θB ,
| mA | = | 12 | mB |
H = MCθ
mA
cA
θA
= mB
cB
θB
( 1/2 mB
)CA
(2θB
) = mB
cB
θB
| CA CB | = | 11 |
⇒ 1 : 1
Question 26 Rapport
A supply of 400V is connected across capacitors of 3μf and 6μf in series. Calculate the charge
Détails de la réponse
| CT | = | C1 × C2 C1 + C2 |
| = | 3 × 63 + 6 |
= 189
= 2μf
Q = CV
⇒ 2 × 10−6
× 400
⇒ 800 × 10−6
C = 8 × 10−4
C
Question 27 Rapport
Which of the following is/are the limitations to the Rutherford's atomic models?
I. It is applicable when energy is radiated as electrons are revolving
II. It is applicable when energy is radiated in a continuous mode
III. It is applicable to an atom with only one electron in the other shell
Détails de la réponse
Rutherford assumed that (I) energy is radiated when electrons are revolving (II) energy is radiated in a continuous mode. These are limitations of Rutherford's model
Question 28 Rapport
A body was slightly displaced from its equilibrium position. Which one of the following is a condition for its stable equilibrium
Détails de la réponse
The condition for stable equilibrium of a body that has been slightly displaced from its equilibrium position is "an increase in the potential energy of the body." When an object is at its equilibrium position, it has a minimum potential energy. When the object is displaced from its equilibrium position, it has a higher potential energy. For the object to be in stable equilibrium, it must be able to return to its equilibrium position after it has been displaced. If the potential energy of the object increases as it is displaced, it means that the equilibrium position is a point of stable equilibrium. This is because the object will experience a restoring force that will push it back towards its equilibrium position, as the potential energy decreases. Therefore, an increase in potential energy is a condition for a body to be in stable equilibrium after it has been slightly displaced from its equilibrium position. An increase in kinetic energy or height does not necessarily indicate stability, as it depends on the specific situation and other factors at play.
Question 29 Rapport
A copper rod, 5m long when heated through 20c, expands by 1mm. If a second copper rod, 2.5m long is heated through 5c, by how much will it expand?
Détails de la réponse
l1
= 5m, ΔT = 10c, l2
- l1
= 1mm
l1
= 2.5m, ΔT = 5c, l2
- l1
= ?
| using | α | = | l2 - l1 l1 ΔT |
| 15(10) | = | l2 - l1 2.5(5) |
| l2 | - | l2 | = | 2.5(5)5(10) | = | 14 | = | 0.25mm |
Question 30 Rapport
Lamps in domestic lightings are usually in
Détails de la réponse
Lamps in domestic lighting are usually connected in parallel. This means that each lamp is connected directly to the power supply, rather than being connected in a series or divergent or convergent configuration. In a parallel configuration, each lamp operates independently of the others, and if one lamp fails, the other lamps will continue to function. This is an important feature for domestic lighting, as it ensures that a single lamp failure will not leave the entire room in darkness. Additionally, in a parallel configuration, each lamp can be controlled independently, for example by a switch or dimmer, without affecting the operation of the other lamps. This allows for greater flexibility in lighting design and control. In summary, lamps in domestic lighting are usually connected in parallel because it allows for independent operation of each lamp and ensures that a single lamp failure does not affect the operation of the others.
Question 31 Rapport
A metal rod has a length of 100cm at \(200^\circ C\). At what temperature will its length be 99.4cm. If the linear expansivity of the material of the rod is \(2 \times 10^{-5}C^{-1}\)
Détails de la réponse
The linear expansivity of a material describes how its length changes with temperature. If the linear expansivity is given as 2 × 10^-5/°C, this means that for every 1°C change in temperature, the length of the material will change by 2 × 10^-5 times its original length. Given that the rod has a length of 100 cm at 200°C, we can use this information to find its length at a different temperature. If we let L be the length of the rod at temperature T, we can write the relationship as follows: L = 100 cm * (1 + 2 × 10^-5 * (T - 200°C)) To find the temperature at which the rod will have a length of 99.4 cm, we can set L equal to 99.4 cm and solve for T: 99.4 cm = 100 cm * (1 + 2 × 10^-5 * (T - 200°C)) 99.4 cm / 100 cm = 1 + 2 × 10^-5 * (T - 200°C) 0.994 = 1 + 2 × 10^-5 * (T - 200°C) -0.006 = 2 × 10^-5 * (T - 200°C) -0.006 / 2 × 10^-5 = T - 200°C -0.006 / (2 × 10^-5) = T - 200°C -0.006 / (2 × 10^-5) + 200°C = T So the temperature at which the rod will have a length of 99.4 cm is approximately equal to -0.006 / (2 × 10^-5) + 200°C, or -100°C. Therefore, the answer is -100°C.
Question 32 Rapport
Water and Kerosine are drawn respectively into the two limbs of a Hare's apparatus. The destiny of water is \(1.0\mathrm{g\,cm^{-3}}\) and the density of kerosine is \(0.80\mathrm{g\,cm^{-3}}\). If the height of the water column is 20.0cm, calculate the height of the kerosine column.
Détails de la réponse
Devices with different liquids
d1
h1
= d2
h2
1 × 20 = 0.8 × h
| h | = | 200.8 | = | 25cm |
Question 33 Rapport
When the temperature of a liquid is increased, its surface tension
Détails de la réponse
Surface tension or elasticity of a fluid decreases with increased in temperature
Question 34 Rapport
In the molecular explanation of conduction, heat is transferred by the
Détails de la réponse
In the molecular explanation of conduction, heat is transferred by the Free electrons. In metals, free electrons move randomly and collide with other particles as they gain kinetic energy. These free electrons transfer the energy to the adjacent particles, which in turn gain kinetic energy and transmit it to other adjacent particles, thus transferring heat energy from one part of the material to another. This process of heat transfer by free electrons is called conduction. Therefore, the correct option is "Free electrons."
Question 35 Rapport
Which of the following bodies, each with centre of gravity G, lying on a horizontal table, is/are in unstable equilibrium?
Détails de la réponse
- I and II are in neutral equilibrium. They will roll continuously on the table
- III is a body with high centre of gravity (unstable)
- IV is a body with high centre of gravity (stable)
Question 36 Rapport
The following are parts of the eye
I. Retina
II. Pupil
III. Iris
The correct equivalent in the camera in the same order are
Détails de la réponse
- retina is similar to film
- pupil is similar to aperture
- iris is similar to diaphragm
Question 37 Rapport
An alternating current can induce voltage because it has
Détails de la réponse
An alternating current can induce voltage because it has a varying magnetic field. An alternating current (AC) is an electrical current that periodically reverses direction, unlike direct current (DC), which flows in one direction. When an AC current flows through a wire, it generates a magnetic field that changes direction with the current. As the current alternates, the magnetic field expands and contracts, inducing an electromotive force (EMF) in any nearby conductor or coil of wire. This phenomenon is known as electromagnetic induction, and it is the basis for the operation of many electrical devices, such as generators and transformers. The induced voltage depends on the strength and rate of change of the magnetic field and the number of turns in the coil. In summary, an alternating current can induce voltage because it creates a varying magnetic field, which in turn generates an electromotive force in nearby conductors or coils of wire, according to the principle of electromagnetic induction.
Question 38 Rapport
A thermocouple thermometer is connected to a millivoltmeter which can read up to 10mV. When one junction is in ice at 0°C and the other is steam at 100°C, the millivoltmeter reads 4mV. What is the maximum temperature which this arrangement can measure
Détails de la réponse
The maximum temperature which this arrangement can measure is 250°C. A thermocouple thermometer works by using the thermoelectric effect, which is the phenomenon that occurs when two dissimilar metals are joined together to form a loop and a temperature difference is established between the two junctions. This temperature difference generates a small electrical voltage, which can be measured using a millivoltmeter. The voltage generated is proportional to the temperature difference between the two junctions. In the case of the thermocouple thermometer described, one junction is in ice at 0°C and the other is steam at 100°C, and the millivoltmeter reads 4mV. This means that the voltage generated by the thermocouple is 4 millivolts, which corresponds to a temperature difference of 100°C. However, the millivoltmeter can only read up to 10mV, so the maximum temperature difference it can measure is 10mV / 4mV/°C = 250°C. This means that the maximum temperature which this arrangement can measure is 250°C.
Question 39 Rapport
Electrons were discovered by
Détails de la réponse
Electrons were discovered by J.J. Thompson. In the late 19th century, he performed a series of experiments using cathode ray tubes, which are glass tubes containing low-pressure gas and electrodes. By applying high voltage, he observed a beam of negatively charged particles traveling from the negative electrode to the positive electrode. He concluded that these particles, which he called "corpuscles," were fundamental units of negative charge and later were renamed electrons. This discovery led to the development of the modern understanding of atomic structure and the electron's role in it.
Question 40 Rapport
The value of T in the figure above is
Détails de la réponse
Tsin30 + Tsin30 =40
2Tsin30 = 40
Tsin30 = 40/2 = 20
T(12 ) = 20
T = 20 x 2 = 40N
