Specialist Techniques And Processes
Resumen
There are only three things you can do to a material. You can take some away, you can add some on, or you can push what is there into a new shape. Every process in a workshop and every process in a factory is one of those three, and the specification uses exactly those headings: wastage, addition and shaping. Learn them as three families and thirty processes become manageable.
This is the largest topic in the specialist technical principles and it earned three questions on the specimen paper, worth thirteen marks between them. You will learn how to use measurement and reference points, templates, jigs and patterns; the wastage, addition and shaping processes by name and by what each is for; how products are made to a tolerance by manufacturing to minimum and maximum measurements; the application and use of quality control, which the specification defines differently for each material area; and the commercial processes for papers and boards, timbers, metals and polymers. This is specialist technical principles content, examined in Section B of Paper 1.
Objetivos
- The use of production aids
- How to use measurement/reference points, templates, jigs, and patterns where suitable
- Tools, equipment and processes
- A range of tools, equipment and processes that can be used to shape, fabricate, construct, and assemble high quality prototypes, as appropriate for the materials being used including: wastage, such as:
- die cutting
- perforation
- turning
- sawing
- milling and routing
- drilling
- cutting and shearing
- addition, such as:
- brazing
- welding
- lamination
- soldering
- 3D printing
- printing
- shaping such as:
- vacuum forming
- creasing
- pressing
- drape forming
- bending
- folding
- blow moulding
- casting
- injection moulding
- extrusion.
- How products are made to a tolerance
- Manufacturing to minimum and maximum measurements.
- The application and use of quality control
- Papers and boards (registration marks).
- Timber based materials (dimensional accuracy using go/ no go fixture).
- Metal based materials (dimensional accuracy using measuring equipment).
- Polymers (dimensional accuracy by selecting correct laser cutting settings).
- Commercial processes
- Papers and boards (offset lithography and die cutting).
- Timber based materials (routing and turning).
- Metal based materials (milling and casting).
- Polymers (injection moulding and extrusion).
Mapa mental
Este tema esta esquematizado para ver como se conectan las ideas.
Abre el mapa mental en la app
Nota de la lección
Apunte completo disponible en la aplicacion Green Bridge
Instala la aplicacion Green Bridge CBT en tu movil u ordenador para acceder a toda la biblioteca IGCSE: examenes anteriores, criterios de correccion, mapas mentales, tarjetas de estudio y lecciones en audio.
Evaluación de la lección
Felicitaciones por completar la lección del Specialist Techniques And Processes. Ahora que has explorado el conceptos e ideas clave, es hora de poner a prueba tus conocimientos. Esta sección ofrece una variedad de prácticas Preguntas diseñadas para reforzar su comprensión y ayudarle a evaluar su comprensión del material.
Te encontrarás con una variedad de tipos de preguntas, incluyendo preguntas de opción múltiple, preguntas de respuesta corta y preguntas de ensayo. Cada pregunta está cuidadosamente diseñada para evaluar diferentes aspectos de tu conocimiento y habilidades de pensamiento crítico.
Utiliza esta sección de evaluación como una oportunidad para reforzar tu comprensión del tema e identificar cualquier área en la que puedas necesitar un estudio adicional. No te desanimes por los desafíos que encuentres; en su lugar, míralos como oportunidades para el crecimiento y la mejora.
- Which one of the following is an addition process? A. Blow moulding B. Brazing C. Milling D. Shearing Answer: B
- In vacuum forming, the softened sheet is forced onto the mould by A. a hydraulic ram. B. atmospheric pressure. C. the weight of the sheet. D. an injection screw. Answer: B
- A dimension is given as 40 millimetres with a tolerance of plus 0.3 and minus 0.2. What is the total tolerance? A. 0.1 millimetres B. 0.2 millimetres C. 0.3 millimetres D. 0.5 millimetres Answer: D
- Registration marks are used as a quality control method for A. metal based materials. B. papers and boards. C. polymers. D. timber based materials. Answer: B
- Which process produces a continuous length of constant cross section? A. Blow moulding B. Die casting C. Extrusion D. Pressing Answer: C
Resuelve estas preguntas en la aplicacion
Resuelve estas preguntas en la aplicacion
Libros Recomendados
Practica preguntas simuladas
¿Quieres practicar preguntas simuladas sobre Specialist Techniques And Processes? Descarga la aplicación Green Bridge CBT para acceder a preguntas simuladas y evaluaciones completas sobre este tema.
Descarga la aplicación en Google Playstore.
Todo lo que necesitas para destacar en JAMB, WAEC y NECO.
