WAEC SSCE - Biology - 1989 (Essay)
Pregunta 1 Informe
(a) Describe how the floral parts of a named flower are adapted to wind-pollination.
(b) Explain how each of the following behaviours in animals affects the reproduction process: (i) territoriality. (ii) display; (iii) seasonal migration.
(a) How the floral parts of a named wind-pollinated flower are adapted to wind pollination (for example maize or guinea grass)
- Large, feathery (branched) stigmas that hang outside the flower and expose a large surface to catch pollen carried by the wind.
- Long filaments with anthers that hang out (are versatile and pendulous) so that the pollen is freely exposed to and easily shaken off by the wind.
- Pollen grains are small, light, smooth and dry and are produced in very large quantities so that they are easily blown far by the wind.
- Petals are small, dull or absent, with no scent and no nectar, since insects are not needed for pollination.
- The flowers are often held high above the leaves and open before the leaves expand, so nothing obstructs the movement of pollen by wind.
(b) How each behaviour affects reproduction in animals
- (i) Territoriality: an animal defends an area (territory) against others of its own species. This ensures that the holder has enough food, space and nesting sites, reduces overcrowding, and secures mates, so that mating, egg-laying and the raising of the young take place successfully with less competition.
- (ii) Display: special courtship behaviours (colours, dances, calls, movements) used to attract a mate of the opposite sex. Display helps the animals to recognise, attract and select a suitable mate of the same species, stimulates the partner to be ready for mating, and so ensures successful fertilisation and reproduction.
- (iii) Seasonal migration: the regular movement of animals from one area to another at particular seasons. Animals migrate to reach areas with favourable conditions (food, warmth, safe breeding grounds), so that breeding, egg-laying and the survival and growth of the young take place under the best possible conditions.
Detalles de la respuesta
(a) How the floral parts of a named wind-pollinated flower are adapted to wind pollination (for example maize or guinea grass)
- Large, feathery (branched) stigmas that hang outside the flower and expose a large surface to catch pollen carried by the wind.
- Long filaments with anthers that hang out (are versatile and pendulous) so that the pollen is freely exposed to and easily shaken off by the wind.
- Pollen grains are small, light, smooth and dry and are produced in very large quantities so that they are easily blown far by the wind.
- Petals are small, dull or absent, with no scent and no nectar, since insects are not needed for pollination.
- The flowers are often held high above the leaves and open before the leaves expand, so nothing obstructs the movement of pollen by wind.
(b) How each behaviour affects reproduction in animals
- (i) Territoriality: an animal defends an area (territory) against others of its own species. This ensures that the holder has enough food, space and nesting sites, reduces overcrowding, and secures mates, so that mating, egg-laying and the raising of the young take place successfully with less competition.
- (ii) Display: special courtship behaviours (colours, dances, calls, movements) used to attract a mate of the opposite sex. Display helps the animals to recognise, attract and select a suitable mate of the same species, stimulates the partner to be ready for mating, and so ensures successful fertilisation and reproduction.
- (iii) Seasonal migration: the regular movement of animals from one area to another at particular seasons. Animals migrate to reach areas with favourable conditions (food, warmth, safe breeding grounds), so that breeding, egg-laying and the survival and growth of the young take place under the best possible conditions.
Pregunta 2 Informe
(a) List five morphological features that are characteristic of plant found in each of the following habitats:-(i) tropical rainforest. (ii) savanna. In each case, state function of the features listed in (a) to the plant.
(b) Explain the term: ecological succession
(c) By means of a diagram only, outline the carbon cycle to show the relative importance of the cycle to life in general.
(a) Morphological features of plants and their functions
(i) Tropical rainforest plants
- Broad leaves: increase surface area for trapping the limited light and for photosynthesis.
- Drip tips on leaves: allow excess rain water to run off quickly, keeping the leaf dry.
- Buttress and prop roots: give support to the tall trees in the shallow forest soil.
- Tall, straight trunks: raise the crown up to reach sunlight above the canopy.
- Climbing and epiphytic habit (lianes, climbers): enable weaker plants to reach light without building thick stems.
(ii) Savanna plants
- Small or needle-like/reduced leaves: reduce surface area and water loss by transpiration.
- Thick, corky (fire-resistant) bark: protects the plant against bush fires and heat.
- Deep and extensive root systems: reach water deep in the soil during the dry season.
- Thick waxy cuticle / hairy leaves: reduce transpiration.
- Water-storage tissue in stems (succulence): stores water for use in the dry season.
(b) Ecological succession is the gradual and orderly replacement of one community of organisms by another in the same area over a period of time, until a stable, self-maintaining community (the climax community) is reached.
(c) The carbon cycle (diagram only)
The diagram should show a closed loop with labelled arrows illustrating:
- Photosynthesis: green plants take in carbon dioxide from the air and fix it into organic food.
- Feeding: animals obtain carbon compounds by eating plants (and other animals).
- Respiration: plants and animals release carbon dioxide back to the air.
- Decomposition: decomposers (bacteria and fungi) break down dead plants and animals, releasing carbon dioxide.
- Combustion: burning of wood and fossil fuels (coal, oil) returns carbon dioxide to the atmosphere.
Its importance: it keeps the amount of carbon dioxide in the atmosphere fairly constant, supplies the carbon needed to build all organic molecules (the basis of all life), and links producers, consumers and decomposers.
Detalles de la respuesta
(a) Morphological features of plants and their functions
(i) Tropical rainforest plants
- Broad leaves: increase surface area for trapping the limited light and for photosynthesis.
- Drip tips on leaves: allow excess rain water to run off quickly, keeping the leaf dry.
- Buttress and prop roots: give support to the tall trees in the shallow forest soil.
- Tall, straight trunks: raise the crown up to reach sunlight above the canopy.
- Climbing and epiphytic habit (lianes, climbers): enable weaker plants to reach light without building thick stems.
(ii) Savanna plants
- Small or needle-like/reduced leaves: reduce surface area and water loss by transpiration.
- Thick, corky (fire-resistant) bark: protects the plant against bush fires and heat.
- Deep and extensive root systems: reach water deep in the soil during the dry season.
- Thick waxy cuticle / hairy leaves: reduce transpiration.
- Water-storage tissue in stems (succulence): stores water for use in the dry season.
(b) Ecological succession is the gradual and orderly replacement of one community of organisms by another in the same area over a period of time, until a stable, self-maintaining community (the climax community) is reached.
(c) The carbon cycle (diagram only)
The diagram should show a closed loop with labelled arrows illustrating:
- Photosynthesis: green plants take in carbon dioxide from the air and fix it into organic food.
- Feeding: animals obtain carbon compounds by eating plants (and other animals).
- Respiration: plants and animals release carbon dioxide back to the air.
- Decomposition: decomposers (bacteria and fungi) break down dead plants and animals, releasing carbon dioxide.
- Combustion: burning of wood and fossil fuels (coal, oil) returns carbon dioxide to the atmosphere.
Its importance: it keeps the amount of carbon dioxide in the atmosphere fairly constant, supplies the carbon needed to build all organic molecules (the basis of all life), and links producers, consumers and decomposers.
Pregunta 3 Informe
(a) Describe an experiment to demonstrate the influence of auxins on the growth of plant shoot.
(b) List three uses of auxins in agriculture.
(c) Describe briefly the mechanism of transmission of impulses through a nerve fibre.
(a) Experiment to demonstrate the influence of auxins on the growth of a plant shoot (phototropism)
- Materials: several germinating oat or maize seedlings (coleoptiles), sharp blade, a box with a hole cut in one side, and a dark cupboard.
- Method: Take three sets of seedlings.
- Set A: leave the tip of the coleoptile intact (control).
- Set B: cut off the extreme tip of the coleoptile.
- Set C: cut off the tip, then replace it on the stump.
- Place all sets in the box so that light enters only from one side (unilateral light) and leave for a day or two.
- Observations: Set A (tip intact) bends and grows towards the light. Set B (tip removed) does not grow or bend. Set C (tip replaced) grows and bends towards the light like Set A.
- Explanation/Conclusion: the growing tip produces a hormone (auxin) which, in unilateral light, moves to the shaded side of the shoot and causes greater cell elongation there, so the shoot bends towards the light. Removing the tip removes the source of auxin, so no growth or bending occurs. This shows that auxin produced by the tip controls the growth (and phototropic curvature) of the shoot.
(b) Three uses of auxins in agriculture
- Used as a rooting hormone to promote the growth of roots on stem cuttings.
- Used as selective weed killers (herbicides) to destroy broad-leaved weeds.
- Used to prevent premature fruit drop and to promote the development of fruits (including seedless/parthenocarpic fruits).
(c) Mechanism of transmission of impulses through a nerve fibre
A resting nerve fibre is polarised: the outside of the membrane is positively charged and the inside negatively charged (resting potential), maintained by the sodium-potassium pump. When the fibre is stimulated strongly enough (above threshold), the membrane at that point becomes depolarised: sodium ions rush in, reversing the charge so the inside becomes positive. This change is the action potential (nerve impulse). The depolarised region stimulates the next region, so the impulse travels as a wave along the fibre. Behind the impulse the membrane is quickly repolarised (returns to resting state). At the end of the fibre the impulse reaches a synapse, where a chemical (neurotransmitter) is released to carry the impulse across the gap to the next neurone.
Detalles de la respuesta
(a) Experiment to demonstrate the influence of auxins on the growth of a plant shoot (phototropism)
- Materials: several germinating oat or maize seedlings (coleoptiles), sharp blade, a box with a hole cut in one side, and a dark cupboard.
- Method: Take three sets of seedlings.
- Set A: leave the tip of the coleoptile intact (control).
- Set B: cut off the extreme tip of the coleoptile.
- Set C: cut off the tip, then replace it on the stump.
- Place all sets in the box so that light enters only from one side (unilateral light) and leave for a day or two.
- Observations: Set A (tip intact) bends and grows towards the light. Set B (tip removed) does not grow or bend. Set C (tip replaced) grows and bends towards the light like Set A.
- Explanation/Conclusion: the growing tip produces a hormone (auxin) which, in unilateral light, moves to the shaded side of the shoot and causes greater cell elongation there, so the shoot bends towards the light. Removing the tip removes the source of auxin, so no growth or bending occurs. This shows that auxin produced by the tip controls the growth (and phototropic curvature) of the shoot.
(b) Three uses of auxins in agriculture
- Used as a rooting hormone to promote the growth of roots on stem cuttings.
- Used as selective weed killers (herbicides) to destroy broad-leaved weeds.
- Used to prevent premature fruit drop and to promote the development of fruits (including seedless/parthenocarpic fruits).
(c) Mechanism of transmission of impulses through a nerve fibre
A resting nerve fibre is polarised: the outside of the membrane is positively charged and the inside negatively charged (resting potential), maintained by the sodium-potassium pump. When the fibre is stimulated strongly enough (above threshold), the membrane at that point becomes depolarised: sodium ions rush in, reversing the charge so the inside becomes positive. This change is the action potential (nerve impulse). The depolarised region stimulates the next region, so the impulse travels as a wave along the fibre. Behind the impulse the membrane is quickly repolarised (returns to resting state). At the end of the fibre the impulse reaches a synapse, where a chemical (neurotransmitter) is released to carry the impulse across the gap to the next neurone.
Pregunta 4 Informe
(a) List three functions of the kidney.
(b) Make a labelled diagram of the mammalian kidney tubule (nephron)
(c) Describe how the kidney carries out two of the functions listed in (a).
(a) Three functions of the kidney
- Excretion: removal of nitrogenous waste (mainly urea), together with excess salts, water and other toxic substances, from the blood as urine.
- Osmoregulation: regulation of the water and salt (osmotic) balance of the blood and body fluids, keeping the osmotic pressure of the plasma constant.
- Homeostasis / regulation of the acid-base balance (pH): maintaining the constant internal composition of the blood by removing excess acids, bases and ions.
(b) Labelled diagram of the mammalian kidney tubule (nephron)
The nephron is the functional unit of the kidney. Each nephron consists of a cup-shaped Bowman's (renal) capsule enclosing a knot of blood capillaries called the glomerulus, fed by the afferent arteriole and drained by the narrower efferent arteriole. The capsule leads into the proximal (first) convoluted tubule, then the loop of Henle (with a descending and an ascending limb), the distal (second) convoluted tubule, and finally the collecting duct. The tubule is surrounded by a network of blood capillaries that reabsorb useful substances back into the blood.
(c) How the kidney carries out two of its functions
(i) Excretion / formation of urine (ultrafiltration and selective reabsorption): Blood is carried to the glomerulus under high pressure through the wide afferent arteriole; because the efferent arteriole leaving the glomerulus is narrower, a high pressure builds up. This high pressure forces water, glucose, salts, urea and other small molecules out of the blood, through the capillary and capsule walls, into the Bowman's capsule. This process is called ultrafiltration. Blood cells and large plasma proteins are too big to pass through and remain in the blood. The filtrate then flows along the tubule, where useful substances are taken back into the surrounding capillaries by selective reabsorption: all the glucose, most of the water and the needed salts are reabsorbed in the proximal convoluted tubule and the loop of Henle. The liquid that remains, now containing urea, excess salts and excess water, is urine. It passes through the collecting duct to the ureter and is stored in the bladder by peristalsis until it is expelled.
(ii) Osmoregulation: The kidney keeps the composition of the blood plasma constant by controlling how much water is reabsorbed. When the blood becomes too concentrated (through excess salt intake or heavy water loss by sweating), this rise in osmotic pressure is detected by sensitive cells in the hypothalamus of the brain, which stimulate the pituitary gland to release more antidiuretic hormone (ADH). ADH travels in the blood to the kidney, where it makes the walls of the distal convoluted tubule and collecting duct more permeable, so that more water is reabsorbed from the filtrate back into the blood. A small volume of concentrated urine is produced and water is conserved. When the blood is too dilute, less ADH is released, less water is reabsorbed, and a large volume of dilute urine is produced. In this way the kidney keeps the water and salt content, and therefore the osmotic pressure, of the blood constant.
Detalles de la respuesta
(a) Three functions of the kidney
- Excretion: removal of nitrogenous waste (mainly urea), together with excess salts, water and other toxic substances, from the blood as urine.
- Osmoregulation: regulation of the water and salt (osmotic) balance of the blood and body fluids, keeping the osmotic pressure of the plasma constant.
- Homeostasis / regulation of the acid-base balance (pH): maintaining the constant internal composition of the blood by removing excess acids, bases and ions.
(b) Labelled diagram of the mammalian kidney tubule (nephron)
The nephron is the functional unit of the kidney. Each nephron consists of a cup-shaped Bowman's (renal) capsule enclosing a knot of blood capillaries called the glomerulus, fed by the afferent arteriole and drained by the narrower efferent arteriole. The capsule leads into the proximal (first) convoluted tubule, then the loop of Henle (with a descending and an ascending limb), the distal (second) convoluted tubule, and finally the collecting duct. The tubule is surrounded by a network of blood capillaries that reabsorb useful substances back into the blood.
(c) How the kidney carries out two of its functions
(i) Excretion / formation of urine (ultrafiltration and selective reabsorption): Blood is carried to the glomerulus under high pressure through the wide afferent arteriole; because the efferent arteriole leaving the glomerulus is narrower, a high pressure builds up. This high pressure forces water, glucose, salts, urea and other small molecules out of the blood, through the capillary and capsule walls, into the Bowman's capsule. This process is called ultrafiltration. Blood cells and large plasma proteins are too big to pass through and remain in the blood. The filtrate then flows along the tubule, where useful substances are taken back into the surrounding capillaries by selective reabsorption: all the glucose, most of the water and the needed salts are reabsorbed in the proximal convoluted tubule and the loop of Henle. The liquid that remains, now containing urea, excess salts and excess water, is urine. It passes through the collecting duct to the ureter and is stored in the bladder by peristalsis until it is expelled.
(ii) Osmoregulation: The kidney keeps the composition of the blood plasma constant by controlling how much water is reabsorbed. When the blood becomes too concentrated (through excess salt intake or heavy water loss by sweating), this rise in osmotic pressure is detected by sensitive cells in the hypothalamus of the brain, which stimulate the pituitary gland to release more antidiuretic hormone (ADH). ADH travels in the blood to the kidney, where it makes the walls of the distal convoluted tubule and collecting duct more permeable, so that more water is reabsorbed from the filtrate back into the blood. A small volume of concentrated urine is produced and water is conserved. When the blood is too dilute, less ADH is released, less water is reabsorbed, and a large volume of dilute urine is produced. In this way the kidney keeps the water and salt content, and therefore the osmotic pressure, of the blood constant.
