JAMB UTME - Chemistry - 2018
Pregunta 2 Informe
(I). \(3\mathrm{CuO}(s) + 2\mathrm{NH}_3(g) \longrightarrow 3\mathrm{Cu}(s) + 3\mathrm{H}_2\mathrm{O}(l) + \mathrm{N}_2(g)\)
(II). \(2\mathrm{NH}_3(g) + 3\mathrm{Cl}_2(g) \longrightarrow 6\mathrm{HCl}(g) + \mathrm{N}_2(g)\)
(III). \(4\mathrm{NH}_3(g) + 3\mathrm{O}_2(g) \longrightarrow 6\mathrm{H}_2\mathrm{O}(l) + \mathrm{N}_2(g)\)
The reactions represented by the equations above demonstrate the
Detalles de la respuesta
Pregunta 4 Informe
According to the Kinetic Theory an increase in temperature causes the kinetic energy of particles to
Detalles de la respuesta
The kinetic energy of particles increases with an increase in temperature. In the Kinetic Theory, temperature is related to the average kinetic energy of the particles in a substance. The higher the temperature, the faster the particles move, and the more energy they have. Think of it like this: if you throw a ball, it will have more energy and travel farther if you throw it harder. Similarly, if you heat up a substance, its particles will move faster and have more energy. So, the answer is that an increase in temperature causes the kinetic energy of particles to increase.
Pregunta 5 Informe
At what temperature is the solubility of potassium trioxonitrate(V ) equal to that of sodium trioxonitrate (V)?
Detalles de la respuesta
Pregunta 6 Informe
When air which contains the gases Oxygen, nitrogen, carbondioxide, water vapour and the rare gases, is passed through alkaline pyrogallol and then over quicklime, the only gases left are;
Detalles de la respuesta
Pregunta 7 Informe
The Sulphide which is insoluble in dilute hydrochloric acid is
Detalles de la respuesta
The sulphide which is insoluble in dilute hydrochloric acid is Copper Sulphide (CuS). When metal sulphides react with hydrochloric acid, they undergo an acid-base reaction to produce hydrogen sulphide gas and the corresponding metal chloride. For example, when Iron Sulphide (FeS) reacts with hydrochloric acid, it forms hydrogen sulphide gas (H2S) and iron chloride (FeCl2) as follows: FeS + 2HCl → H2S + FeCl2 However, Copper Sulphide (CuS) does not react with dilute hydrochloric acid, as it is insoluble in this acid. This is due to the fact that CuS is a much less reactive metal sulphide compared to FeS and ZnS, and therefore it does not undergo an acid-base reaction with dilute hydrochloric acid. In summary, CuS is the sulphide which is insoluble in dilute hydrochloric acid due to its low reactivity with acids.
Pregunta 8 Informe
When large hydrocarbon molecules are heated at high temperature in the presence of a catalyst to give smaller molecules, the process is known as
Detalles de la respuesta
The process of breaking down large hydrocarbon molecules into smaller molecules by heating them at high temperatures in the presence of a catalyst is known as cracking. This process is used to convert heavy, high-molecular-weight hydrocarbon molecules into lighter, more valuable products such as gasoline and diesel fuel. The high temperatures cause the large molecules to break apart into smaller ones, and the catalyst helps speed up the reaction. This process is important in the petrochemical industry, as it allows for the production of a wider range of useful products from crude oil.
Pregunta 9 Informe
What is the PH of 0.00 1 moldm\(^{3}\) solution of the sodium hydroxide
Detalles de la respuesta
Pregunta 10 Informe
The situation obtained when a perfect gas expands into a vacuum is
Detalles de la respuesta
Pregunta 11 Informe
The type of bonding in \(\left[\mathrm{Cu}(\mathrm{NH}_3)_4\right]^{2+}\) is
Detalles de la respuesta
The type of bonding in [Cu(NH3)4]2+ is coordinate bonding. Coordinate bonding (also known as dative covalent bonding) is a type of covalent bonding where one atom (in this case, the nitrogen atom in NH3) donates a pair of electrons to another atom or ion (in this case, the copper ion Cu2+). The donating atom is called the ligand, and the receiving atom or ion is called the central metal ion. In [Cu(NH3)4]2+, each ammonia molecule (NH3) donates a lone pair of electrons on the nitrogen atom to the copper ion, forming four coordinate bonds between the ligands and the central copper ion. The presence of coordinate bonds is indicated by the use of square brackets around the coordination compound, and the charge on the compound is indicated by the superscript outside the brackets. Therefore, the answer is option A: coordinate.
Pregunta 12 Informe
A substance that is used as a ripening agent for fruits is
Detalles de la respuesta
The substance that is commonly used as a ripening agent for fruits is ethene. Ethene, also known as ethylene, is a natural plant hormone that is produced by fruits, especially during the ripening process. It is a colorless gas that can be easily synthesized and used as a ripening agent for fruits. When fruits are exposed to ethene, it triggers a series of biochemical reactions that accelerate the natural ripening process. This can help fruits to ripen faster and more uniformly, which is important for commercial purposes where fruits need to be sold quickly. The use of ethene as a ripening agent is regulated by food safety agencies, as excessive exposure to ethene can cause over-ripening and spoilage of fruits. However, when used in appropriate concentrations, ethene is a safe and effective way to promote the ripening of fruits.
Pregunta 13 Informe
The ionic radii of metals are usually
Detalles de la respuesta
The ionic radii of metals are usually smaller than their atomic radii. The size of an atom is determined by the distance between the nucleus and the outermost electrons, which is known as the atomic radius. When a metal atom loses one or more electrons to form a positive ion (or cation), the resulting ion has a smaller size than the original atom. This is because the positive charge of the ion attracts the remaining electrons closer to the nucleus, making the ion smaller in size. So, when a metal forms a cation, its ionic radius is typically smaller than its atomic radius. This is a general trend in the periodic table, although there are some exceptions.
Pregunta 14 Informe
A basic postulate of the kinetic theory of gases is that the molecules of a gas move in straight lines between collisions. This implies that
Detalles de la respuesta
Pregunta 15 Informe
In the shown experiment (Fig. 1) the litmus paper will initially
Detalles de la respuesta
Pregunta 16 Informe
Suitable reagents for the laboratory preparation nitrogen are
Detalles de la respuesta
Pregunta 17 Informe
What is the concentration of a solution containing 2g of NaOH in 100cm3 of solution? [Na = 23, O =16, H = 1]
Detalles de la respuesta
The concentration of a solution containing 2g of NaOH in 100cm3 of solution is 0.40 moldm-3. This can be calculated by using the formula: molarity (M) = number of moles of solute / volume of solution (in liters) First, we need to calculate the number of moles of NaOH in the solution. The molar mass of NaOH is (23 + 16 + 1) = 40 g/mol. So, 2g of NaOH is equal to 2/40 = 0.05 moles. Next, we need to convert the volume of the solution from cm3 to liters. 1 cm3 = 0.001 liters, so 100 cm3 = 0.1 liters. Finally, we can calculate the molarity as follows: M = 0.05 moles / 0.1 liters = 0.5 mol/L = 0.50 moldm-3 So, the concentration of the solution is 0.50 moldm-3.
Pregunta 19 Informe
The figure above shows the electrolysis of molten sodium chloride. Z is the
Detalles de la respuesta
The figure shows the electrolysis of molten sodium chloride. During electrolysis, an electric current is passed through a molten or dissolved ionic compound to separate the ions. The positive ions move towards the negative electrode (cathode) and the negative ions move towards the positive electrode (anode). In the figure, the electrode connected to the positive terminal of the battery is the anode and the electrode connected to the negative terminal is the cathode. At the anode, the negatively charged chloride ions (Cl-) lose electrons and are oxidized to form chlorine gas (Cl2). At the cathode, the positively charged sodium ions (Na+) gain electrons and are reduced to form liquid sodium metal (Na). Therefore, the answer is (a) anode where the Cl- ions are oxidized. Z is the anode in the figure.
Pregunta 20 Informe
Which of the following is used to power steam engines?
Detalles de la respuesta
Coal is the fuel that is typically used to power steam engines. Coal is burned in a furnace to heat water and produce steam, which is then used to power a steam engine. The steam engine converts the energy from the steam into mechanical energy, which can be used to power machines or generate electricity. Coal is a fossil fuel that has been used for centuries as a source of energy, and it played a significant role in the industrial revolution, powering steam engines that were used to drive machines in factories and transport goods and people by train. Today, steam engines are less common as other forms of energy have taken their place, but they remain an important part of our history and technological development.
Pregunta 21 Informe
Which of the following statements is correct about the periodic table?
Detalles de la respuesta
Pregunta 22 Informe
The choice of method for extracting a metal from its ores depends on the
Detalles de la respuesta
The choice of method for extracting a metal from its ores depends on the position of the metal in the electrochemical series. The electrochemical series is a list of metals arranged in order of their ability to gain or lose electrons. The metals at the top of the series (such as sodium and potassium) are very reactive and will readily lose electrons, while those at the bottom (such as gold and platinum) are less reactive and less likely to lose electrons. The position of a metal in the electrochemical series determines the method of extraction that should be used. For example, metals at the top of the series are usually extracted by electrolysis, which involves passing an electric current through a molten compound of the metal. This process is necessary because the metals at the top of the series are very reactive and are strongly bonded to other elements in their ores. On the other hand, metals at the bottom of the series are usually extracted by reduction with carbon or hydrogen. This is because these metals are less reactive and can be separated from their ores by reacting them with a reducing agent that can take away the oxygen and other impurities. Therefore, the position of the metal in the electrochemical series is a crucial factor in determining the method of extraction that should be used to extract it from its ores.
Pregunta 23 Informe
Sieving is a technique used to separate mixtures containing solid particles of
Detalles de la respuesta
Sieving is a technique used to separate mixtures containing solid particles of different sizes. A sieve is a mesh or perforated screen that is used to separate particles based on their size. The mixture is poured onto the sieve, and the particles that are too large to pass through the holes are left on top, while the smaller particles fall through the holes and are collected below. This process allows for the separation of the different-sized particles, making it easier to purify or further process the mixture.
Pregunta 24 Informe
The constituent common to duralumin and alnico is
Detalles de la respuesta
The common constituent found in both duralumin and alnico is aluminum (Al). Duralumin is an alloy made up of aluminum, copper, manganese, and magnesium. It is known for its high strength and light weight, making it useful in various applications such as aerospace and construction. Alnico, on the other hand, is an alloy made of aluminum, nickel, cobalt, iron, and small amounts of other elements. It is used in the production of strong permanent magnets for various applications such as in motors, generators, and loudspeakers. So, even though duralumin and alnico have different properties and uses, they both contain the element aluminum.
Pregunta 25 Informe
During the electrolysis of copper II sulphate between platinum electrodes, if litmus solution is added to the anode compartment
Detalles de la respuesta
During the electrolysis of copper II sulphate between platinum electrodes, if litmus solution is added to the anode compartment, the litmus will turn red and oxygen gas will be evolved. This is because during electrolysis, the positively charged copper ions (Cu2+) in the copper II sulphate solution are attracted to the negative cathode electrode, where they gain electrons and are reduced to form solid copper. At the same time, the negatively charged sulphate ions (SO42-) are attracted to the positive anode electrode, where they lose electrons and are oxidized to form oxygen gas and water. The litmus added to the anode compartment turns red because of the formation of oxygen gas, which is a highly reactive oxidizing agent that can react with the litmus to cause it to turn red. No hydrogen gas is evolved because hydrogen is produced at the cathode, which is in a separate compartment from the anode where the litmus is added.
Pregunta 26 Informe
The alkanoic acid found in human sweat is
Detalles de la respuesta
The alkanoic acid found in human sweat is CH3CH2COOH, also known as propionic acid. Sweat is composed of various substances such as water, electrolytes, and waste products. One of these waste products is an oily substance called sebum, which is secreted by the sebaceous glands in the skin. When sebum breaks down, it forms various fatty acids, including propionic acid. Propionic acid has a slightly pungent odor, which is why sweat can sometimes smell sour or cheesy. However, the presence of propionic acid in sweat is actually beneficial, as it has antimicrobial properties that help to prevent the growth of harmful bacteria on the skin. In summary, the alkanoic acid found in human sweat is propionic acid, which is a fatty acid produced when sebum breaks down. Its antimicrobial properties help to keep the skin healthy.
Pregunta 27 Informe
Methanoic acid mixes with water in all proportions and has about the same boiling point as water. Which of the following methods would you adopt to obtain pure water from a mixture of Sand, water and methanoic acid?
Detalles de la respuesta
Pregunta 29 Informe
Which of these sources of water may likely contain the least concentration of Ca\(^{2+}\) and Mg\(^{2+}\)?
Detalles de la respuesta
The source of water that is likely to contain the least concentration of Ca2+ and Mg2+ is tap water. Tap water is treated and processed before it is made available for consumption, which often involves removing minerals such as calcium and magnesium. Spring water and river water, on the other hand, are naturally occurring and generally contain higher levels of minerals. Sea water has the highest concentration of minerals, including Ca2+ and Mg2+.
Pregunta 30 Informe
If the molecular mass of tetraoxosulphate (VI) acid is 98, calculate its vapour density
Detalles de la respuesta
Pregunta 31 Informe
Which of the following pairs of substances will react further with oxygen to form a higher oxide?
Detalles de la respuesta
Pregunta 32 Informe
Beryllium and Aluminium have similar properties because they
Detalles de la respuesta
Pregunta 33 Informe
Which of the following metals cannot replace hydrogen from water or steam?
Detalles de la respuesta
Pregunta 34 Informe
The solubility of the solids that dissolves in a given solvent with the liberation of heat will
Detalles de la respuesta
The solubility of solids in a given solvent is the amount of solid that can dissolve in the solvent to form a solution. When a solid dissolves in a solvent, it releases heat. The solubility of the solid in the solvent can be affected by changes in temperature. Generally, when the temperature of a solution increases, the solubility of the solid in the solvent increases as well. This is because the increased heat energy makes it easier for the solid particles to separate and dissolve in the solvent. As a result, the solubility of the solid in the solvent will increase with an increase in temperature. On the other hand, if the temperature decreases, the solubility of the solid in the solvent decreases. This is because the decreased heat energy makes it harder for the solid particles to separate and dissolve in the solvent. As a result, the solubility of the solid in the solvent will decrease with a decrease in temperature. In summary, the solubility of solids in a given solvent will generally increase with an increase in temperature and decrease with a decrease in temperature.
Pregunta 35 Informe
An element used in the production of matches is
Detalles de la respuesta
The element used in the production of matches is sulphur. Matches are small sticks made of wood or cardboard with a chemical mixture at one end. This chemical mixture, called the match head, contains several compounds including sulphur. When the match is struck against a rough surface, the friction generates heat that ignites the sulphur in the match head, causing a flame. This flame then ignites the other compounds in the match head, which in turn ignites the wood or cardboard stick. Sulphur is an important component of the match head because it is highly flammable and burns easily. It also helps to ignite the other compounds in the match head. However, sulphur by itself is not a good fuel, which means that it cannot sustain a flame on its own. Therefore, it needs other combustible materials, such as potassium chlorate or phosphorus, to make the match head burn. Overall, sulphur plays a crucial role in the chemistry of matches and allows us to easily start fires for various purposes.
Pregunta 36 Informe
The Consecutive members of an alkane homologous series differ by
Detalles de la respuesta
The consecutive members of an alkane homologous series differ by a CH2 unit. This means that each successive member of the alkane series has one more CH2 unit than the previous member. For example, consider the simplest alkane, methane (CH4). The next member of the series is ethane (C2H6), which differs from methane by one CH2 unit. The next member after that is propane (C3H8), which differs from ethane by another CH2 unit. This pattern continues for all members of the alkane homologous series. The reason for this is that each carbon atom in the alkane chain must be bonded to four other atoms, which are usually hydrogen atoms. This means that each carbon atom in the chain can only bond to one other carbon atom. Therefore, the length of the alkane chain can only increase by adding CH2 units to the end of the chain. In summary, the consecutive members of an alkane homologous series differ by a CH2 unit because this is the only way to add length to the alkane chain while maintaining the required number of bonds for each carbon atom in the chain.
Pregunta 37 Informe
The number of electrons in the valence shell of an element of atomic number 14 is?
Detalles de la respuesta
The number of electrons in the valence shell of an element can be determined by using the periodic table and the electron configuration of the element. The valence shell is the outermost shell that contains electrons that are involved in chemical reactions. For an element with atomic number 14, which is silicon, the electron configuration is 1s2 2s2 2p6 3s2 3p2. The valence shell of silicon is the third shell, which contains 3s2 and 3p2 electrons. Therefore, the number of electrons in the valence shell of silicon is 4 electrons.
Pregunta 38 Informe
Which of these alloys contains copper?
Detalles de la respuesta
Bronze is the alloy that contains copper. Bronze is a metal alloy composed of copper and typically other elements such as tin, aluminum, silicon, or nickel. It is known for its strength, durability, and corrosion resistance. In fact, bronze is one of the earliest alloys created by humans, and it has been used for thousands of years to make tools, weapons, and decorative objects. Solder is an alloy of lead, tin, and sometimes other metals that is used to join metals together by melting the solder and allowing it to flow into the joint. Steel is an alloy of iron and carbon, and sometimes other elements like chromium, nickel, or manganese, that is known for its strength and durability. Permallory is a nickel-iron alloy with high magnetic permeability and low coercive force, which makes it useful in the production of electrical and electronic equipment. None of these alloys contain copper.
Pregunta 39 Informe
If one of the following oxides is heated with hydrogen or carbon using a bunsen burner. it is not reduced to the metal, Which one is it?
Detalles de la respuesta
The oxide that cannot be reduced to the metal when heated with hydrogen or carbon using a Bunsen burner is magnesium oxide. Magnesium oxide is an ionic compound made up of positively charged magnesium ions and negatively charged oxygen ions. When heated with hydrogen or carbon, the oxygen ions are not easily removed from the compound. This is because the ionic bond between the magnesium and oxygen ions is very strong and requires a lot of energy to break. On the other hand, lead oxide, copper oxide, and tin oxide are all metal oxides and can be reduced to the metal by heating with hydrogen or carbon. This is because they have a weaker bond between the metal and oxygen ions, allowing the oxygen to be removed more easily when heated. In conclusion, magnesium oxide is the oxide that cannot be reduced to the metal when heated with hydrogen or carbon using a Bunsen burner.
Pregunta 40 Informe
A correct electrochemical series can be obtained from Na, Ca, Al, Mg, Zn, Fe, Pb, H, Cu, Hg, Ag, Au by interchanging
Detalles de la respuesta
