JAMB UTME - Chemistry - 2000

Detalles de la respuesta

Synthesis gas is a mixture of carbon monoxide (CO) and hydrogen gas (H2). Therefore, the correct option is "CO and H2".

Detalles de la respuesta

Sieving is a method that is commonly used to separate mixtures that contain solid particles of different sizes. The mixture is poured through a sieve, which is a device with a mesh or a net. The smaller particles that can pass through the mesh or net will fall through, while the larger particles will be left on top. Therefore, sieving is used to separate solid particles that are of different sizes.

Detalles de la respuesta

Of the types of bonding listed, metallic, covalent, co-ordinate, and electrovalent, metallic bonding is the type of bonding that does not involve the formation of new substances. Metallic bonding occurs between metal atoms, where the outer electrons of each metal atom are delocalized and can move freely throughout the entire metallic crystal. These delocalized electrons are responsible for the characteristic properties of metals, such as high electrical conductivity and luster. However, metallic bonding does not involve the formation of new substances, as the metal atoms are simply held together in a lattice structure by the electrostatic attraction between the positive metal ions and the negatively charged delocalized electrons. In contrast, covalent, co-ordinate, and electrovalent bonding all involve the sharing or transfer of electrons between atoms to form new chemical substances.

Detalles de la respuesta

Detalles de la respuesta

Detalles de la respuesta

The correct option is: "are not easily oxidized." Copper and silver are commonly used as coinage metals because they are both relatively unreactive and do not easily corrode or oxidize. This makes them a good choice for coins, as they will not deteriorate or lose their value due to exposure to the air or other elements over time.

Detalles de la respuesta

Vulcanization is a chemical process that is used to make rubber stronger and more durable. During vulcanization, the rubber is treated with a chemical agent that causes it to cross-link and form a stronger network. This process can improve the strength, durability, and elasticity of the rubber. The options given are all chemicals, but only one option is commonly used as the substance for vulcanization of rubber. The substance that is often used for vulcanization of rubber is sulfur. When sulfur is added to raw rubber and the mixture is heated, the sulfur molecules cross-link with the rubber molecules, creating a stronger and more durable material. This process is known as vulcanization and it has revolutionized the rubber industry, allowing for the creation of many new and useful rubber products.

Detalles de la respuesta

2CO + O${}_2$ $\to$ 2CO${}_2$
50cm${}^3$ $\to$ 25cm${}^3$
20% $\times$ 150cm${}^3$
30cm${}^3$ is the volume of oxygen available for the reactions.
But only 25cm${}^3$ is required, therefore O${}_2$ is in excess.

Detalles de la respuesta

Detalles de la respuesta

The sensitivity of salts to light depends on the stability of their respective silver halide compounds. The stability of these compounds is determined by the size of the halide ion. The larger the halide ion, the less stable the corresponding silver halide compound is. In the given options, the salts are arranged in the order of increasing size of halide ions. Thus, the stability of the corresponding silver halide compounds decreases in the same order. The most stable compound is the one with the smallest halide ion, and the least stable is the one with the largest halide ion. Therefore, the correct order of sensitivity to light for the given salts is: AgCl > AgBr > AgI This is because AgI has the largest halide ion, making its corresponding silver halide compound the least stable and most sensitive to light. On the other hand, AgCl has the smallest halide ion, making its corresponding silver halide compound the most stable and least sensitive to light.

Detalles de la respuesta

Detalles de la respuesta

Detalles de la respuesta

Detalles de la respuesta

A mixture of iodine and sulfur crystals can be separated by treatment with carbon (IV) sulfide to filter off iodine. This is because iodine dissolves in carbon (IV) sulfide, while sulfur does not. Therefore, adding carbon (IV) sulfide to the mixture will dissolve the iodine, allowing it to be separated from the sulfur by filtration. Water, ethanoic acid, and methanol would not be effective in separating iodine and sulfur because they do not have the same solvent properties as carbon (IV) sulfide towards iodine.

Detalles de la respuesta

pOH = -log [2.5 * 10-1]
= -log[-0.3979 + 1]
= 13.40

Detalles de la respuesta

The conditions necessary for the extraction of a water molecule from two molecules of ethanol are excess acid and a higher temperature. This process is known as dehydration, where water is removed from a molecule or compound. In the case of ethanol, excess acid (usually concentrated sulfuric acid) acts as a catalyst to remove a water molecule (H2O) from two ethanol molecules (C2H5OH), leaving behind ethene (C2H4). The excess acid helps to facilitate the reaction by providing an acidic medium, while the higher temperature helps to break the bond between the two molecules and make the reaction more efficient. Less acid and lower temperature would not be as effective in extracting the water molecule, while excess acid and a lower temperature could slow down or inhibit the reaction altogether.

Detalles de la respuesta

Detalles de la respuesta

The equilibrium constant expression is used to calculate the equilibrium constant of a chemical reaction. The species involved in the expression are those that are in a state of equilibrium, which means they are in constant flux between reactants and products. In order to calculate the equilibrium constant, we need to know the concentrations of the reactants and products in the equilibrium state. Therefore, the species involved in the equilibrium constant expression depend on the state of the reactants and products. Among the options given, the correct answer is the last one: gaseous and dissolved species. This is because when a reaction involves gaseous and dissolved species, their concentrations can change during the reaction, and therefore they need to be included in the equilibrium constant expression. Solid and liquid species, on the other hand, have a fixed concentration during the reaction, and so they are not included in the equilibrium constant expression.

Detalles de la respuesta

The reaction of carbide (calcium carbide) with water gives ethyne (also known as acetylene). This reaction is an example of an acid-base reaction, where the carbide acts as a base and water acts as an acid. The balanced chemical equation for this reaction is: CaC2 + 2H2O → C2H2 + Ca(OH)2 The ethyne gas produced in this reaction is widely used as a fuel for welding and cutting metals, as well as for other industrial applications.

Detalles de la respuesta

Detalles de la respuesta

In the given reaction, HCl donates a proton (H+) to H2O to form H3O+ and Cl-. The species that accepts the proton is the base, which in this case is water (H2O). The species that donates the proton is the acid, which in this case is HCl. The conjugate base is the remaining species after the acid has donated the proton, which is Cl- in this reaction. Therefore, the correct answer is "conjugate base".

Detalles de la respuesta

When solid AgCl is mixed with water, it partially dissolves and reaches equilibrium according to the following equation: AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq) The solubility product (Ksp) expression for this equilibrium is: Ksp = [Ag⁺][Cl⁻] Given that the solubility product (Ksp) of AgCl is 2.0 × 10⁻¹⁰ mol² dm⁻⁶, we can use this value and the initial volume of water (1.0 dm³) to calculate the maximum amount of Ag⁺ and Cl⁻ that can dissolve before reaching equilibrium. Let x be the molar solubility of AgCl, which is also equal to the concentration of Ag⁺ and Cl⁻ ions that dissolve. Then, at equilibrium: [Ag⁺] = [Cl⁻] = x Substituting these into the Ksp expression, we have: Ksp = x² Solving for x, we get: x = √Ksp = √(2.0 × 10⁻¹⁰ mol² dm⁻⁶) = 1.414 × 10⁻⁵ mol dm⁻³ This means that at equilibrium, the concentration of Ag⁺ and Cl⁻ ions in the solution is 1.414 × 10⁻⁵ mol dm⁻³. Now, we can use the volume of water and the concentration of Ag⁺ and Cl⁻ ions to calculate the total amount of AgCl that can dissolve: (1.0 dm³) × (1.414 × 10⁻⁵ mol dm⁻³) = 1.414 × 10⁻⁵ mol AgCl This is the maximum amount of AgCl that can dissolve in 1.0 dm³ of water. However, in the given problem, only 2.0 g of AgCl is used, which is equivalent to: (2.0 g) / (143.32 g/mol) = 0.01395 mol AgCl Since this amount is larger than the maximum amount that can dissolve in 1.0 dm³ of water, all of the AgCl will dissolve and none will be lost in the process. Therefore, the answer is option (D) 1.414 × 10⁻⁵ mol dm⁻³

Detalles de la respuesta

Detalles de la respuesta

The correct answer is that powdered marble has a larger surface area. This is because the powdered form has smaller particle sizes and, therefore, a greater surface area per unit mass. This greater surface area allows for a greater number of collisions between the particles of marble and the hydrochloric acid solution, leading to a faster reaction.

Detalles de la respuesta

The shape of a molecule is determined by the arrangement of its atoms in space. The arrangement of atoms is influenced by the number of bonded electron pairs and the number of non-bonded electron pairs around the central atom. Based on this information, the shapes of the molecules are: - CO2: linear - H2O: bent - CH4: tetrahedral Therefore, the correct answer is bent, tetrahedral, and linear, respectively.

Detalles de la respuesta

The atomic radius of an atom is defined as half the distance between the nuclei of two identical atoms when they are bonded together. In this case, we know that the distance between the nuclei of chlorine atoms in a chlorine molecule is 0.194nm. Since this is the distance between the two nuclei, we can find the atomic radius of chlorine by dividing this distance by 2. 0.194nm ÷ 2 = 0.097nm Therefore, the atomic radius of a chlorine atom is 0.097nm. Answer: 0.097nm

Detalles de la respuesta

Argon is commonly used in welding processes, especially in the form of tungsten inert gas (TIG) welding. In TIG welding, the arc is maintained between a tungsten electrode and the workpiece while a stream of argon gas is used to shield the weld area from atmospheric gases like nitrogen and oxygen. This prevents oxidation and other contamination of the weld, resulting in a higher-quality, cleaner weld. Therefore, the correct option is "electrical arc welding".

Detalles de la respuesta

The refreshing and characteristic taste of soda water and other soft drinks is due to the presence of carbon dioxide gas, which is also known as carbon (IV) oxide. When carbon dioxide gas dissolves in water, it forms carbonic acid, which gives the drinks their slightly acidic taste. The carbon dioxide gas also creates the fizz or bubbles in the drink, which adds to its refreshing quality. Therefore, carbon (IV) oxide, is the correct answer. Options 2, 3, and 4 are not responsible for the taste of soda water and soft drinks.

Detalles de la respuesta

Haematite is an ore of iron. It is a mineral form of iron oxide, with a chemical formula of Fe2O3. Haematite is one of the most important sources of iron for manufacturing iron and steel products. When heated with coke (a form of coal), haematite releases oxygen and forms iron, which is then used to produce various steel and iron products.

Detalles de la respuesta

The problem involves using Boyle's law, which states that the pressure of a gas is inversely proportional to its volume at a constant temperature. Mathematically, P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume, respectively. Given the ratio of the initial to final pressure as 1:1.5, we can assume that the final pressure is 1.5 times the initial pressure. Therefore, P2 = 1.5 * P1. Using the formula P1V1 = P2V2 and substituting the known values, we get: P1 * 3000 = (1.5 * P1) * V2 Simplifying the equation, we get: V2 = (P1 * V1) / (1.5 * P1) = 2000cm3 Therefore, the final volume of the gas is 2000cm3. So the answer is 200cm3.

Detalles de la respuesta

In the given chemical reaction, the enthalpy change is positive (+180.6 kJ/mol) indicating that the reaction is endothermic, meaning it absorbs heat from the surroundings. According to Le Chatelier's principle, an increase in temperature will favor an endothermic reaction. Therefore, an increase in temperature will increase the yield of NO, which is the product of the reaction. Hence, the correct answer is: "increase in the yield of NO."

Detalles de la respuesta

The knowledge of half-life can be used to detect an element. Half-life is the time taken for half of the radioactive atoms in a sample to decay. Since each radioactive element has a unique half-life, scientists can use the knowledge of half-life to determine which elements are present in a sample. By measuring the amount of radioactivity in a sample over time, they can determine the half-life of the element and identify it. Therefore, option "detect an element" is correct.

Detalles de la respuesta

Sucrose is a type of sugar that is commonly found in many foods. It is made up of two simple sugar molecules, which are bonded together through a glycosidic bond. The options given are all possible simple sugar molecules, but only one option represents the correct combination of sugar molecules that make up sucrose. Sucrose is made up of one molecule of glucose and one molecule of fructose. Glucose and fructose are both monosaccharides, which are simple sugar molecules that cannot be broken down into simpler sugars. When glucose and fructose are combined through a glycosidic bond, they form a disaccharide called sucrose. Sucrose is commonly found in many foods, including fruits, vegetables, and processed foods like candy and baked goods.

Detalles de la respuesta

Detalles de la respuesta

Detalles de la respuesta

The phenomenon where an element exists in different forms in the same physical state is known as "allotropy." Allotropy is a property of some chemical elements where they exist in two or more different physical forms, which are called allotropes. These allotropes can have different properties, such as different colors, densities, and crystal structures, but they consist of the same type of atoms. Isomerism refers to the existence of compounds with the same molecular formula but different structural arrangements. Amorphism refers to the lack of long-range order in a material, while isotopy refers to the existence of different isotopes of an element with different numbers of neutrons.

Detalles de la respuesta

Heat, = -M C Q
= -50 * 4.2 * 14.3
= -300 KJ mol-1

Detalles de la respuesta

The mole fraction of oxygen can be calculated using the formula: Mole fraction of oxygen = Partial pressure of oxygen / Total pressure Plugging in the given values, we get: Mole fraction of oxygen = 452mmHg / 780mmHg Simplifying this fraction gives us: Mole fraction of oxygen = 0.579 Therefore, the correct option is: 0.579 This means that about 57.9% of the total pressure of the air sample is due to oxygen molecules.

Detalles de la respuesta

Detalles de la respuesta

Detalles de la respuesta

Detalles de la respuesta

The repeating unit in natural rubber is isoprene. Natural rubber is a polymer made up of repeating units of the monomer isoprene. Isoprene has a molecular formula of C5H8 and a structure that contains a double bond, which allows it to form long chains through a process called polymerization. These chains then link together to form the rubbery material that we know as natural rubber.

Detalles de la respuesta

K${}_2$Cr${}_2$O${}_7$ + 14HCl $\to$ 2CrO${}_{13}$ + 2KCl + 3C${}_2$ + 7H${}_2$O

Detalles de la respuesta

Potassium vapour burns with a violet flame.

Detalles de la respuesta

The oxidation number of sulfur (S) is the hypothetical charge that an atom would have if all its bonds to atoms of different elements were completely ionic in nature. To determine the oxidation number of sulfur in each compound given, we need to follow some rules: - The oxidation number of an atom in its free (uncombined) state is zero. - The oxidation number of a monatomic ion is equal to its charge. - The sum of the oxidation numbers of all atoms in a neutral molecule must be zero. - The sum of the oxidation numbers of all atoms in a polyatomic ion must equal the charge on the ion. Using these rules, we can find the oxidation number of sulfur in each compound: - In S8, sulfur is in its elemental form, and the oxidation number of each atom is zero. - In H2S, hydrogen (H) has an oxidation number of +1, and the sum of the oxidation numbers in the molecule is zero. Therefore, sulfur must have an oxidation number of -2 to balance out the charge. - In SO2, oxygen (O) has an oxidation number of -2, and the sum of the oxidation numbers in the molecule is zero. Therefore, sulfur must have an oxidation number of +4 to balance out the charge. - In SO32-, oxygen has an oxidation number of -2, and the sum of the oxidation numbers in the ion is -2. Therefore, sulfur must have an oxidation number of +4 to balance out the charge. Therefore, the compound in which the oxidation number of sulfur is equal to -2 is H2S.

Detalles de la respuesta

The decolourization of bromine water and acidified potassium tetraoxomanganate (VII) solution is used to identify unsaturated organic compounds. When bromine water is added to an unsaturated organic compound, the brown color of bromine is decolorized due to the addition of bromine across the C=C double bond in the unsaturated compound. Similarly, when acidified potassium tetraoxomanganate (VII) solution is added to an unsaturated organic compound, the purple color of the solution is also decolorized due to the addition of the potassium tetraoxomanganate (VII) across the C=C double bond in the unsaturated compound. The decolorization of both these solutions is due to the reaction with unsaturated organic compounds, which is a characteristic test used to identify them. Therefore, the correct option is "bromine water and acidified potassium tetraoxomanganate (VII) solution".

Detalles de la respuesta

Faraday's law states that the amount of substance deposited in an electrolysis is directly proportional to the quantity of electricity consumed (Q). Mathematically, this can be expressed as M = ZQ, where M is the mass of substance deposited and Z is the electrochemical equivalent, a constant that depends on the substance being electrolyzed. Therefore, the correct option is "M = ZQ".

Detalles de la respuesta

The quantity of electricity required to discharge zinc can be calculated using Faraday's law, which states that one mole of electrons carries a charge of 96,500 Coulombs. The given chemical equation shows that the reduction of 1 mole of Zn2+ requires the gain of 2 electrons (1/2 Zn2+ + e- → 1/2 Zn). Therefore, to discharge 1 mole of Zn2+, 2 moles of electrons are needed. Using Faraday's law, we can calculate the quantity of electricity required to discharge 1 mole of Zn2+: 1 mole of Zn2+ requires 2 * 96,500 C = 193,000 C Therefore, to calculate the quantity of electricity required to discharge zinc from the given half-reaction, we need to divide 193,000 C by 2 (since the reaction involves half-moles of Zn2+): Quantity of electricity required = 193,000 C / 2 = 96,500 C Comparing this value with the options given, we can see that the correct answer is: 9.650 * 104 C This matches the value of Faraday's constant, which was given in the question.

Detalles de la respuesta

Soft water is water that has a low concentration of dissolved minerals such as calcium and magnesium. A side effect of soft water is that it may attack lead contained in pipes, causing it to dissolve into the water. Lead in drinking water can be harmful to human health, especially in young children and pregnant women. Therefore, it is important to be aware of the quality of the water you consume and take necessary precautions if the water is too soft or has any other potential contaminants.

Detalles de la respuesta

The compound composed of Al, Si, O and H is clay. Clay is a mineral that is primarily composed of hydrous aluminum silicates and various impurities such as magnesium, calcium, potassium, or iron. The chemical formula of clay is typically expressed as Al₂O₃•2SiO₂•2H₂O, indicating the presence of aluminum, silicon, oxygen, and water in its composition. Therefore, the correct option is "Clay".