Wird geladen....
|
Drücken und Halten zum Ziehen |
|||
|
Hier klicken, um zu schließen |
|||
Frage 1 Bericht
In an AC circuit, resonance occurs when the impedance of the circuit is minimum.
Impedance is the total opposition to the flow of alternating current in a circuit, and it consists of two components: resistance (R) and reactance (X).
Reactance can be further divided into two types: inductive reactance (XL) and capacitive reactance (XC).
At resonance, the inductive reactance and the capacitive reactance are equal in magnitude and opposite in sign. This means that their effects cancel each other out, resulting in a minimum total reactance.
Since impedance is the combination of resistance and reactance, when the reactance is at its minimum, the impedance of the circuit is also at its minimum.
So, in summary, resonance occurs in an AC circuit when the impedance is minimum. At resonance, the inductive reactance and the capacitive reactance cancel each other out, resulting in a minimum total reactance and minimum impedance.
Frage 2 Bericht
Frage 3 Bericht
Frage 4 Bericht
Frage 5 Bericht
The name of the model of the atom that describes electrons as orbiting the nucleus in specific energy levels is the Bohr model.
The Bohr model was proposed by Danish physicist Niels Bohr in 1913. According to this model, electrons revolve around the nucleus in specific energy levels or shells. Each energy level corresponds to a certain amount of energy that an electron possesses. The energy levels are represented by whole numbers, with the closest energy level to the nucleus having the lowest energy and subsequent energy levels having higher energies.
Bohr's model also stated that electrons can only exist in certain fixed orbits around the nucleus. These orbits have a specific distance from the nucleus and are called stationary states. Electrons can move between these energy levels by absorbing or emitting energy in the form of photons.
The Bohr model successfully explained the observed emission and absorption spectra of atoms, as well as the stability of atoms. However, it has limitations in fully describing the behavior of electrons. It does not accurately represent the path or trajectory of electrons and does not account for other quantum effects.
Overall, the Bohr model provides a simplified and understandable framework for visualizing the arrangement of electrons in an atom, with electrons occupying specific energy levels or shells around the nucleus.
Frage 6 Bericht
Frage 7 Bericht
A 400 N box is being pushed across a level floor at a constant speed by a force P of 100 N at an angle of 30.0° to the horizontal, as shown in the the diagram below. What is the coefficient of kinetic friction between the box and the floor?
W = 400 N; P = 100 N; θ = 30o; μ = ?
Frictional force (Fr) = μR (where R is the normal reaction)
The forces acting along the horizontal direction are Fr and Px
∴ Pcos 30° - Fr = ma (Pcos 30° is acting in the +ve x-axis while Fr in the -ve x-axis)
⇒ 100cos 30° - μR = ma
Since the box is moving at constant speed, its acceleration is zero
⇒ 100cos 30° - μR = 0
⇒ 100cos 30o = μR ----- (i)
The forces acting in the vertical direction are W, Py and R
∴ R - Psin 30° - W = 0 (R is acting upward (+ve) while Py and W are acting downward (-ve) and they are at equilibrium)
⇒ R - 100sin 30° - 400 = 0
⇒ R = 100sin 30° + 400
⇒ R = 50 + 400 = 450 N
From equation (i)
⇒ 100cos 30° = 450μ
⇒μ=100cos30°
N = 100cos30°450
= μ = 0.19
Frage 8 Bericht
An open-tube mercury manometer is used to measure the pressure in a gas tank. When the atmospheric pressure is 101,325 \(P_a\), what is the absolute pressure in \(P_a\) in the tank if the height of the mercury in the open tube is 25 cm higher
Frage 9 Bericht
Frage 10 Bericht
Frage 11 Bericht
In the diagram above, if the south poles of two magnets stroke a steel bar, the polarities at X and Y will respectively be
Frage 12 Bericht
T=800N; I=50cm=0.5m,
m=10g=0.01kg
fundamental freq: fo
=?
fo
= 121√Tμ
μ =m1
=0.010.5
⇒ fo
=12×0.5
√8000.02
fo
⇒√ 40,000
⇒1st overtone = 2fo
=2×200 = 400Hz
⇒2nd overtone =3fo
=3×200=600Hz
∴3rd over tone= 4fo
=4×200=800Hz
Frage 13 Bericht
Find the tension in the two cords shown in the figure above. Neglect the mass of the cords, and assume that the angle is 38° and the mass m is 220 kg
[Take g = 9.8 ms-2]
W = mg = 220 x 9.8 = 2156 N
⇒Sin 38º = 2156T1
⇒ T1 = 2156Sin38
⇒ T1 = 3502 N
Cos 38º = T2T1
⇒ T2 = 3502 x Cos 38º
⇒ T2 = 2760 N
; T1
= 3502 N, T2
= 2760 N.
Frage 14 Bericht
Frage 15 Bericht
On a particular hot day, the temperature is 40°C and the partial pressure of water vapor in the air is 38.8 mmHg. What is the relative humidity?
Frage 16 Bericht
A parallel plate capacitor separated by an air gap is made of 0.8m2 tin plates and 20 mm apart. It is connected to 120 V battery. What is the charge on each plate?
Take \( \epsilon_o = 8.85 * 10^{-12}\,\mathrm{F\,m^{-1}} \)
Frage 17 Bericht
Frage 18 Bericht
A pyrometer thermometer measures temperature from the thermal radiation emitted by objects.
When objects are heated, they emit thermal radiation, which is a form of electromagnetic radiation. This radiation is primarily in the infrared wavelength range. A pyrometer thermometer is specifically designed to measure the intensity of this thermal radiation and convert it into a temperature reading.
The pyrometer thermometer works based on the principle of measuring the amount of thermal radiation reaching the sensor. This is done using a detector that is sensitive to the infrared wavelength range. The detector absorbs the thermal radiation emitted by the object and generates an electrical signal proportional to the intensity of the radiation.
The electrical signal from the detector is then processed by the thermometer's electronics to calculate and display the corresponding temperature. The calibration of the thermometer ensures accurate temperature readings based on the known relationship between the intensity of thermal radiation and temperature.
Pyrometer thermometers are commonly used in industrial applications where contact-based temperature measurement methods are not feasible or accurate enough. They can measure temperatures of objects from a distance without physically touching them, which makes them suitable for measuring high temperatures, moving objects, or objects in hazardous or inaccessible environments.
Therefore, the pyrometer thermometer is the correct option for measuring temperature from thermal radiation emitted by objects.
Frage 19 Bericht
Frage 20 Bericht
Frage 21 Bericht
Frage 22 Bericht
A 200 kg load is raised using a 110 m long lever as shown in the diagram above. The load is 10m from the pivot P. If the efficiency of the the lever is 80%, find the effort E required to lift the load.
[Take g = 10ms-2]
Frage 23 Bericht
Frage 24 Bericht
When a water droplet is placed on a freshly cut piece of wood, it spreads out to form a thin layer because the wood is adhesive to water.
Adhesion is the attraction between different substances, in this case, water and wood. Wood is a porous material, meaning it has tiny holes or gaps in its surface. These tiny holes create a large surface area for the water droplet to interact with.
When the water droplet comes into contact with the wood, the adhesive forces between the water molecules and the wood molecules are stronger than the cohesive forces between the water molecules. This causes the water droplet to spread out, trying to maximize its contact with the wood surface.
The spreading out of the water droplet forms a thin layer because the wood surface is not completely smooth. Instead, it has irregularities and imperfections, which allow the water to seep into those gaps and spread out further.
Therefore, when a water droplet is placed on a freshly cut piece of wood, it spreads out to form a thin layer due to the adhesive forces between the water and the wood surface.
Frage 25 Bericht
The Tungsten filament lamp is a type of incandescent light source.
An incandescent light source works by using electricity to heat a filament inside the bulb until it becomes so hot that it emits light. In a tungsten filament lamp, the filament is made of tungsten, which is a metal that has a very high melting point. This allows the filament to get extremely hot without melting.
When an electric current passes through the filament, it heats up and starts to glow, producing visible light. The light emitted by a tungsten filament lamp is actually a result of the high temperature, which causes the atoms in the filament to vibrate and release energy in the form of light.
Incandescent light sources like tungsten filament lamps have been widely used for many years because they produce a warm, yellowish light that is similar to natural sunlight. However, they are not very energy-efficient, as a significant amount of the electrical energy is converted into heat rather than light.
In recent years, there has been a shift towards more energy-efficient alternatives like LED lamps and fluorescent lamps. LED lamps use a different mechanism to produce light, using a semiconductor that emits light when electric current passes through it. Fluorescent lamps use a gas-filled tube that emits ultraviolet light when electric current flows through it, and this ultraviolet light is then converted into visible light by a phosphor coating inside the tube.
So, in summary, the tungsten filament lamp is the type of incandescent light source among the options given. It works by heating a tungsten filament to a very high temperature, causing it to emit light. However, it is less energy-efficient compared to LED and fluorescent lamps.
Frage 26 Bericht
The branch of physics that deals with the motion of objects and the forces acting on them is called mechanics.
Mechanics is the foundation of physics that studies how objects move and interact under the influence of forces. It encompasses both the study of the motion of macroscopic objects, such as cars and planets, and the behavior of microscopic particles, such as atoms and molecules.
Mechanics is divided into two main branches:
Therefore, when referring to the branch of physics that specifically focuses on the motion of objects and the forces acting on them, the correct answer is mechanics.
Frage 27 Bericht
The correct answer is The electric force is directed from the positive particle to the negative particle.
When a positively charged particle is placed near a negatively charged particle, they exert an attractive force on each other. This force is called the electric force.
According to Coulomb's Law, the electric force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
In this case, the positively charged particle has a positive charge and the negatively charged particle has a negative charge. Since opposite charges attract each other, the electric force between them is attractive.
Therefore, the electric force is directed from the positive particle to the negative particle.
Frage 28 Bericht
A beam of light traveling in water is incident on a glass which is immersed in the water. The incident beam makes an angle of \(40^\circ\) with the normal. Calculate the angle of refraction in the glass.
[Refractive index of water = 1.33, Refractive index of glass = 1.5]
Frage 29 Bericht
Surface tension is a property of liquids that arises due to the cohesive forces between the molecules at the surface. It can be thought of as the "skin" or "film" that forms on the surface of a liquid.
Considering the options given:
- Water: Water molecules have strong cohesive forces, allowing them to form hydrogen bonds with each other. As a result, water has relatively high surface tension.
- Mercury: Mercury is a metal with metallic bonding, which is much stronger than the cohesive forces in liquids. As a result, mercury has very high surface tension.
- Oil: Oils typically consist of nonpolar molecules, which have weaker cohesive forces compared to polar molecules like water. Therefore, oil generally has lower surface tension than water.
Based on this information, we can conclude that mercury has the highest surface tension among these liquids.
Frage 30 Bericht
Which of the following statements regarding the application of electrical conduction via gases is/are correct?
Electrical conduction in gas is applied in:
(i) The identification of gases
(ii) Lighting/fluorescent tubes
(iii) Photocells
(iv) Cathode ray oscilloscope/T.V. tubes
Frage 31 Bericht
Frage 32 Bericht
A travelling wave of amplitude 0.80 m has a frequency of 16 Hz and a wave speed of \(20\ \mathrm{m\,s^{-1}}\).
Calculate the wave number of the wave.
Frage 33 Bericht
Frage 34 Bericht
The number of holes in an intrinsic semiconductor is equal to the number of free electrons.
In an intrinsic semiconductor, the valence band is completely filled with electrons. However, due to thermal energy, some of these electrons can gain enough energy to jump to the conduction band, leaving behind holes in the valence band.
For every electron that moves to the conduction band, a hole is created in the valence band. Since the number of electrons and holes is equal, the number of holes in an intrinsic semiconductor is equal to the number of free electrons.
Therefore, the correct option is: is equal to the number of free electrons.
Frage 35 Bericht
Night vision goggles use infrared waves to enable the user to see in the dark.
Infrared waves are a type of electromagnetic radiation that have longer wavelengths than visible light. They fall between the visible and microwave regions on the electromagnetic spectrum. Unlike visible light, which is visible to the human eye, infrared waves cannot be seen without the use of specialized devices such as night vision goggles.
When it is dark, objects do not emit visible light that can be detected by the human eye. However, they do emit heat in the form of infrared radiation. Night vision goggles work by detecting and amplifying this infrared radiation, which is then converted into visible light that can be seen by the user.
The goggles contain an image intensifier tube that is sensitive to infrared radiation. This tube amplifies the incoming infrared light and converts it into an image that can be seen through the goggles. The resulting image appears green because the human eye is more sensitive to green light.
Therefore, to see in the dark, night vision goggles use infrared waves to detect and amplify the infrared radiation emitted by objects. This enables the user to have enhanced vision in low-light conditions or complete darkness.
Frage 36 Bericht
Frage 37 Bericht
Frage 38 Bericht
Let mb=mass of empty bottle,
mw
=mass of water only and
ma
= mass of alcohol only
given; mb
=19g
mb
+ mw
= 66g
mb
+ ma
= ?
R.d=0.8
R.d=mass of alcohol
massofalcoholmassofequalvolumeofwater
mass of equal volume of water = mw
=66-19=47g
0.8 = ma47
ma
=0.8×47 =37.6g
mb
+ ma
= 19+37.6=56.6g
Frage 39 Bericht
The working of the beam balance is based on the principle of moments.
Moments, also known as torques, are a measure of the turning effect of a force. In the case of the beam balance, it is the moments that help determine the equilibrium or balance of the system.
The beam balance consists of a beam or lever that is supported at a pivot point called the fulcrum. On either end of the beam, there are pans where the objects to be weighed are placed.
When objects of different weights are placed on the pans, the beam becomes unbalanced. This causes the beam to tilt towards the side with the heavier object. However, in order to achieve equilibrium or balance, the moments on both sides of the beam must be equal.
The moment of a force is calculated by multiplying the magnitude of the force by the perpendicular distance from the point of rotation (the fulcrum) to the line of action of the force.
By adjusting the position of the counterweights or by moving the objects on the pans, the moment on each side of the beam can be balanced, resulting in the beam becoming level or horizontal. This indicates that the weights on both sides are equal.
Therefore, the beam balance operates on the principle of moments, where the balance is achieved by equalizing the moments on both sides of the fulcrum.
Frage 40 Bericht
Möchten Sie mit dieser Aktion fortfahren?