JAMB UTME - Chemistry - 2022

Antwortdetails

The addition of charcoal to the filter bed of sand during water treatment for township supply is to remove odors and improve the taste of the water. Charcoal is a porous material that can adsorb impurities and chemicals from the water, such as dissolved organic matter that can contribute to unpleasant tastes and odors. This process helps to produce a better-quality drinking water that is free from unpleasant tastes and odors. It should be noted that while the addition of charcoal can help remove impurities, it does not kill germs or prevent tooth decay or goiter. Other water treatment methods, such as disinfection with chlorine or ultraviolet light, are required to kill harmful microorganisms and ensure the safety of the drinking water.

Antwortdetails

Antwortdetails

The organic compound with a fishy smell is most likely to have the general formula RNH2, which represents a primary amine. Amines are organic compounds that contain a nitrogen atom bonded to one or more carbon atoms. Primary amines have one alkyl or aryl group and two hydrogen atoms bonded to the nitrogen atom. Some primary amines have a fishy smell, which is caused by the presence of volatile amines. These amines are small molecules that can easily evaporate and have a strong odor, similar to that of fish. Examples of compounds that have a fishy smell include trimethylamine, which is found in fish, and butylamine, which is used in the production of rubber and pharmaceuticals. In summary, the organic compound with a fishy smell is likely to have the general formula RNH2, which represents a primary amine.

Antwortdetails

To determine the oxidation number of oxygen in BaO2, we can use the fact that the overall charge of a compound must be zero. Barium (Ba) is a Group 2 element and has an oxidation state of +2. The compound BaO2 has no net charge, so the sum of the oxidation states of all the atoms must be zero. Let x be the oxidation state of oxygen in BaO2. Therefore, we have: (+2) + 2(x) = 0 Solving for x, we get: x = -1 Therefore, the oxidation number of oxygen in BaO2 is -1.

Antwortdetails

The IUPAC name for CICH2-CH2-CH2-OH is 3-chloropropan-1-ol. To name the compound using the IUPAC nomenclature system, we start by identifying the longest continuous chain of carbon atoms that contains the functional group (-OH). In this case, the longest chain contains three carbon atoms, so the root name is propane. Next, we identify the position of the substituent (-Cl) on the chain. The substituent is attached to the third carbon atom in the chain, so the name of the compound becomes 3-chloropropane. Finally, we add the suffix -ol to indicate that the compound contains an alcohol functional group (-OH), so the complete name of the compound is 3-chloropropan-1-ol. Therefore, the correct answer is 3-chloropropan-1-ol.

Antwortdetails

The white solid obtained when marble (calcium carbonate, CaCO3) is heated to 1473K is calcium oxide (CaO), also known as quicklime. When quicklime reacts vigorously with water, it forms calcium hydroxide (Ca(OH)2), which is an alkaline solution. Therefore, the solution obtained from the reaction of quicklime with water contains calcium hydroxide (Ca(OH)2).

Antwortdetails

Antwortdetails

The liquid is most likely to be option number 4: CH3OHCHOH2OH, which is also known as glycerol or glycerin. Glycerol has a high boiling point of 290°C, which is much higher than the boiling points of the other options. It is also a viscous liquid, which means it is thick and sticky. Glycerol is non-toxic, and it is often used in food, pharmaceuticals, and cosmetics. Furthermore, glycerol is miscible with water, which means that it can be easily mixed with water to form a homogeneous solution. It is also hygroscopic, which means that it can absorb water from the air. These properties make glycerol a useful substance in many applications, such as as a moisturizer in skincare products or as a humectant in food processing.

Antwortdetails

Carbon dioxide (CO2) has a linear molecular geometry, with two oxygen atoms bonded to the central carbon atom. Each bond between carbon and oxygen is a double bond, consisting of two pairs of electrons shared between the atoms. Therefore, there are two bonding pairs in each of the carbon-oxygen double bonds, giving a total of four bonding pairs in CO2. The answer is 4.

Antwortdetails

The organic functional group that can likely decolorize ammoniacal silver nitrate is an alkyne. When ammoniacal silver nitrate is added to a solution containing an alkyne functional group, a white or yellowish precipitate of silver acetylide is formed. Silver acetylide is a highly explosive compound and is sparingly soluble in water, causing it to appear as a white or yellowish solid precipitate. This reaction is used as a test to detect the presence of an alkyne functional group in an organic compound. In contrast, alkanes, alkenes, and alkanols do not react with ammoniacal silver nitrate, so they cannot decolorize it. Therefore, an organic functional group that can likely decolorize ammoniacal silver nitrate is an alkyne.

Antwortdetails

The role that sodium chloride (NaCl) plays in soap preparation is to separate soap from glycerol. When fats or oils are hydrolyzed with an alkali, such as sodium hydroxide (NaOH), the result is a mixture of soap and glycerol. Adding NaCl to this mixture helps to induce the precipitation of the soap, allowing it to be separated from the glycerol. This process is known as "salting out" and is used to purify the soap and remove impurities. Sodium chloride does not react with glycerol or accelerate the decomposition of fat and oil. Also, it does not convert the fatty acid to its sodium salt as this conversion is done by the alkali (such as NaOH) during the saponification process.

Antwortdetails

Out of the given options, K2CO3 is stable to heat.

Antwortdetails

Antwortdetails

Mixing aqueous solutions of barium hydroxide and sodium tetraoxocarbonate (IV) would result in a chemical reaction that produces a white precipitate of barium tetraoxocarbonate (IV). The balanced chemical equation for this reaction is: Ba(OH)2(aq) + Na2CO3(aq) → BaCO3(s) + 2NaOH(aq) In the above equation, the barium hydroxide (Ba(OH)2) reacts with sodium tetraoxocarbonate (IV) (Na2CO3) to form barium tetraoxocarbonate (IV) (BaCO3), which is a white precipitate, and sodium hydroxide (NaOH). Therefore, the correct option is 4) Barium tetraoxocarbonate.

Antwortdetails

Antwortdetails

The correct answer is: "melting does not break the metallic bond but boiling does." The metallic bond is the force of attraction between metal atoms, which holds them together to form a solid. When a metal is heated, its temperature increases, and at a certain point, the energy provided by the heat is enough to overcome the metallic bond and cause the metal to melt. However, even in the liquid state, the metallic bond remains intact, which is why metals have a very high melting point. On the other hand, when the temperature is further increased, the energy provided by the heat becomes enough to break the metallic bond, and the metal atoms become completely detached from one another. This results in the metal boiling and turning into a gas. Because the metallic bond is much stronger than other types of intermolecular forces, such as van der Waals forces, it requires a lot of energy to break, resulting in a large temperature interval between the melting point and boiling point of metal.

Antwortdetails

The metal that can liberate hydrogen gas from steam is iron. The metal activity series is a list of metals in order of their reactivity, with the most reactive metals at the top and the least reactive metals at the bottom. When a metal is placed in a solution of steam (water vapor), the metal will react with the steam if it is more reactive than hydrogen. In this case, iron is more reactive than hydrogen, so it can displace hydrogen from the steam to form hydrogen gas. This reaction can be represented by the equation: Fe + H2O (steam) → FeO (iron oxide) + H2 (hydrogen gas) So, when steam is passed over iron, hydrogen gas is liberated and iron oxide is formed.

Antwortdetails

Copper (II) tetraoxosulphate (IV), also known as copper sulfate or CuSO4, is widely used as a fungicide and a disinfectant. As a fungicide, copper sulfate is effective in controlling fungal diseases in plants, including mildew, leaf spots, and blights. It is also used as a fungicide in swimming pools to prevent the growth of algae. As a disinfectant, copper sulfate is effective in killing bacteria and viruses. It is used in a variety of applications, including in the production of animal feed, as a preservative for wood, and in water treatment to kill bacteria and algae. While copper sulfate has been used as a fertilizer in the past, its use in this capacity has largely been replaced by other compounds. It is not commonly used as a purifier.

Antwortdetails

The oxidizing and reducing properties of a substance depend on its ability to gain or lose electrons. A substance that can gain electrons acts as an oxidizing agent, while a substance that can lose electrons acts as a reducing agent. Among the given options, both Cl2 (chlorine gas) and SO2 (sulfur dioxide) can act as both oxidizing and reducing agents depending on the reaction conditions. - Cl2 can act as an oxidizing agent when it gains electrons to form Cl- ions, and it can act as a reducing agent when it loses electrons to form Cl+ ions. For example, in the reaction Cl2 + 2KBr → 2KCl + Br2, chlorine gas is acting as an oxidizing agent since it is gaining electrons from bromide ions to form bromine gas. However, in the reaction 2Cl- + Cl2 → 2Cl2-, chlorine gas is acting as a reducing agent since it is losing electrons to form chloride ions. - SO2 can act as an oxidizing agent when it gains electrons to form sulfite ions (SO32-), and it can act as a reducing agent when it loses electrons to form sulfur trioxide (SO3). For example, in the reaction SO2 + 2H2S → 3S + 2H2O, sulfur dioxide is acting as a reducing agent since it is losing electrons to form elemental sulfur. However, in the reaction 2SO32- + O2 → 2SO42-, sulfur dioxide is acting as an oxidizing agent since it is gaining electrons to form sulfate ions. H2S (hydrogen sulfide) and NH3 (ammonia) are not likely to act as both oxidizing and reducing agents under normal conditions. H2S tends to act as a reducing agent by donating electrons to oxidizing agents, while NH3 tends to act as a reducing agent by donating electrons to oxidizing agents or as a base by accepting protons.

Antwortdetails

Antwortdetails

The statement that is TRUE of the complete hydrolysis of a glyceride by sodium hydroxide is: - 3 moles of NaOH are required for each mole of glyceride. During the hydrolysis of a glyceride (a triglyceride), the ester bonds between the fatty acid chains and glycerol are broken by the action of a strong base like sodium hydroxide. This results in the formation of glycerol and the corresponding salts of fatty acids, which are commonly known as "soaps." The reaction can be represented by the following equation: Triglyceride + 3 NaOH → 3 soap + glycerol As per the equation, 3 moles of NaOH are required to hydrolyze one mole of glyceride, and 3 moles of soap and one mole of glycerol are produced. The use of concentrated sulfuric acid (H2SO4) is not essential for the completion of the reaction, but it can be used as a catalyst to speed up the reaction.

Antwortdetails

The shape of a molecule of CCl4 is tetrahedral.

Antwortdetails

The organic compound that liberates carbon(iv)oxide from trioxocarbonate(iv) solution is CH3COOH (acetic acid). When acetic acid is added to a solution of trioxocarbonate(iv) (carbonate) it reacts to form carbon(iv)oxide gas, water and a salt. The balanced chemical equation for the reaction is: 2CH3COOH + Na2CO3 → CO2 + 2H2O + 2NaCH3COO The carbon(iv)oxide gas is released as bubbles, causing the solution to fizz. Therefore, CH3COOH is the organic compound that liberates carbon(iv)oxide from trioxocarbonate(iv) solution.

Antwortdetails

The given information suggests that the organic compound is an unsaturated compound (because it decolorized the acidified KMnO4 solution), but it does not contain a functional group that reacts with ammonical AgNO3 solution. Therefore, the likely organic compound is an alkene or an alkyne. Carboxylic acids can also react with acidified KMnO4 solution, but they would also react with ammonical AgNO3 solution to form a silver carboxylate salt. Alkanes are saturated compounds and do not react with either reagent, so they would not decolorize the acidified KMnO4 solution. Therefore, based on the given information, the most likely option is either an alkene or an alkyne.

Antwortdetails

The process of converting crude petroleum into useful products is known as fractional distillation. Crude petroleum is a mixture of different hydrocarbons, and fractional distillation separates these hydrocarbons based on their boiling points. During the process of fractional distillation, crude petroleum is heated to a high temperature, and the resulting vapors are passed through a tower called a fractionating column. This column contains a series of trays, and each tray contains a specific temperature range. As the vapors rise up the column, they cool and condense into liquids on the tray with a temperature that matches their boiling point. The liquids are then collected and further refined into useful products like gasoline, diesel, jet fuel, and heating oil. Fractional distillation is an important process because it allows us to separate and purify the different components of crude petroleum, which have different properties and uses. For example, gasoline has a lower boiling point and is more volatile than diesel fuel, which makes it ideal for use in cars. By separating these components, we can create products that meet specific needs and requirements.

Antwortdetails

The most suitable catalyst for the given reaction is vanadium(V)oxide (V2O5). Vanadium(V)oxide is a commonly used catalyst for the oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3). The reaction is an exothermic reaction, and it occurs at high temperatures (around 450-500°C) in the presence of a catalyst. V2O5 is an effective catalyst for this reaction because it has a high surface area and can provide active sites for the reaction to occur. The vanadium ions in the V2O5 catalyst undergo redox reactions with the sulfur dioxide and oxygen molecules, which promotes the formation of sulfur trioxide. Chromium(VI)oxide and iron(III)oxide are not suitable catalysts for this reaction because they are not effective at promoting the oxidation of sulfur dioxide to sulfur trioxide. Copper(I)oxide can be used as a catalyst for the reaction, but it is not as effective as vanadium(V)oxide.

Antwortdetails

The balanced chemical equation shows that 2 moles of hydrogen gas react with 1 mole of oxygen gas to produce 2 moles of water vapor. Therefore, the stoichiometric ratio of hydrogen to oxygen is 2:1. In this problem, there are 50cm3 of hydrogen gas and 75cm3 of oxygen gas. Since the gases are at the same temperature and pressure, their volumes are directly proportional to the number of moles of gas present. Using the stoichiometric ratio, we can calculate that the amount of oxygen gas required to react completely with 50cm3 of hydrogen gas is (1/2) * 50cm3 = 25cm3. Since there are 75cm3 of oxygen gas present, there must be (75cm3 - 25cm3) = 50cm3 of unreacted oxygen gas remaining. Therefore, the volume of unreacted oxygen gas is 50cm3. Answer: 50cm3

Antwortdetails

The highest equilibrium yield of N2O4 would be produced at low temperature and low pressure. In a chemical reaction, the position of the equilibrium can be influenced by changing the temperature or pressure. A decrease in temperature or an increase in pressure favors the side of the reaction with the fewer moles of gas (in this case, N2O4). This means that, if the temperature is low and the pressure is low, there will be more N2O4 at equilibrium, as the reaction will shift to the right to counteract the reduction in the concentration of N2O4. So, low temperature and low pressure would produce the highest equilibrium yield of N2O4.

Antwortdetails

The method employed in the preparation of salts will depend on the composition of the salt. Different salts have different chemical properties, and the method used to prepare them will depend on these properties. For example, some salts can be easily dissolved in water, while others are not very soluble and may require the use of a different solvent or special conditions to dissolve. The dissociating ability, stability to heat, and precipitating ability of the salt may also play a role in determining the preparation method, but the most important factor is the composition of the salt.

Antwortdetails

Chlorine is not a common bleaching agent for wet litmus paper, wet pawpaw leaf, and most wet fabric dyes. It is commonly used as a bleaching agent for printer's ink.

Antwortdetails

The pollutant that is usually present in a city that generates its electricity from coal is sulfur dioxide (SO2), also known as sulfur(iv)oxide. When coal is burned to generate electricity, sulfur compounds in the coal are released into the air as SO2. This gas can react with other pollutants and atmospheric conditions to form smog, which can be harmful to human health and the environment. Therefore, it is important to reduce the use of coal in electricity generation and promote cleaner and more sustainable energy sources to reduce the levels of SO2 and other harmful pollutants in the air.

Antwortdetails

Among the given options, only CuS will precipitate in dilute HCl. CuS is insoluble in dilute HCl, and hence it will precipitate when added to dilute HCl. However, the other options will dissolve in dilute HCl, and hence they will not precipitate. ZnS will dissolve in dilute HCl to form ZnCl2 and H2S. Na2S will react with dilute HCl to produce H2S and NaCl. FeS will dissolve in dilute HCl to form FeCl2 and H2S. Therefore, the correct answer is (4) CuS.

Antwortdetails

Antwortdetails

Antwortdetails

Wrought iron is a type of iron that is very malleable and ductile, meaning it can be easily shaped and formed into various objects. It is obtained by heating cast iron in a furnace with haematite, also known as iron(III) oxide. When cast iron is heated with haematite in a furnace, a chemical reaction takes place where the haematite reacts with the carbon in the cast iron to produce carbon dioxide gas. This reaction also produces molten iron, which is then further heated to remove any impurities like sulfur and phosphorus. This molten iron is then poured into molds to form ingots of wrought iron. Therefore, haematite is essential in the process of obtaining wrought iron from cast iron.

Antwortdetails

Given:

• Initial pressure, 𝑃1=10P1​=10 atmospheres
• Initial volume, 𝑉1=30 cm3V1​=30cm3
• Final volume, 𝑉2=20 dm3V2​=20dm3

First, convert all volumes to the same units. Since 1 dm3dm3 is 1000 cm3cm3:

𝑉2=20 dm3=20×1000 cm3=20000 cm3V2​=20dm3=20×1000cm3=20000cm3

Now, using Boyle's Law:

𝑃1𝑉1=𝑃2𝑉2P1​V1​=P2​V2​

Substitute the known values into the equation:

10×30=𝑃2×2000010×30=P2​×20000

300=𝑃2×20000300=P2​×20000

Solve for 𝑃2P2​:

𝑃2=30020000P2​=20000300​

𝑃2=0.015 atmospheresP2​=0.015atmospheres

Therefore, the new pressure if the temperature is kept constant is:

Antwortdetails

The balanced chemical equation for the reaction between magnesium (Mg) and sulfuric acid (H2SO4) is: Mg + H2SO4 -> MgSO4 + H2 According to the equation, one mole of Mg reacts with one mole of H2SO4 to produce one mole of magnesium sulfate (MgSO4) and one mole of hydrogen gas (H2). Since the concentration of the sulfuric acid is 1 moldm3, this means that there is one mole of H2SO4 in every 1 liter (1000 cm3) of solution. To determine the amount of Mg that reacts with the H2SO4, we need to use stoichiometry. One mole of Mg reacts with one mole of H2SO4, so the amount of Mg that reacts with 1 moldm3 of H2SO4 is given by: 6g / 24g/mol = 0.25 mol Since the reaction is 1:1, this means that 0.25 mol of H2SO4 is consumed in the reaction. The volume of the solution is 100cm3 (0.1 dm3), so the amount of H2SO4 in the solution is: 1 mol/dm3 x 0.1 dm3 = 0.1 mol The amount of H2SO4 that remains after the reaction is: 0.1 mol - 0.25 mol = -0.15 mol This negative value means that all of the H2SO4 was consumed in the reaction, and there is excess Mg left over. The mass of Mg that remains undissolved is given by: 0.15 mol x 24g/mol = 3.6g Therefore, the correct answer is 3.6g.

Antwortdetails

The reason why calcium forms complexes with ammonia is that it has empty d-orbitals.

Antwortdetails

When ethene is passed into concentrated H2SO4, it undergoes electrophilic addition reaction to form ethyl hydrogen sulfate as the product. The reaction mixture is then diluted with water and warmed to produce ethanol as the main product. Therefore, the answer is ethanol.

Antwortdetails

The compound that exhibits resonance is benzene.